Elcometer Qualicoat Powder Coating Inspection Kit
- Protective Coatings
- Industrial Finishing
The Elcometer Qualicoat Powder Coating Inspection Kit provides the various test instrumentation required to meet the high standards of the Qualicoat Organisation.
- Summary
-
Summary
-
The Qualicoat Organisation brings together the ideals of several National Coating Associations into one quality label for powder coatings on aluminium architectural components. Qualicoat has established Specifications defining minimum requirements for the plant, test equipment, coating materials and finished products.
Within this quality label, Qualicoat identifies a range of inspection requirements to be undertaken with regards to the quality control of powder coated products.
Measurement parameters include:
- Appearance
- Impact and deformation
- Oven temperature
- Coating thickness
- Adhesion
-
- Key Features
-
Key Features
Elcometer Qualicoat Powder Coating Inspection Kit
Kit Contents:
Model Description Basic Top Elcometer 480 Statistical Glossmeter: 60° Model B Model T Elcometer 1506 Mandrel Bend Tester with 5mm and 8mm (0.20 and 0.31”) Mandrels ■ ■ Elcometer 1615 Base Unit and Tube Assembly ■ ■ Elcometer 1615 Kit B: ISO 6272/2 and BS 6496 ■ ■ Elcometer 1620 Manual Cupping Tester with Digital Gauge ■ ■ Elcometer 215 Oven Data Logger & Kit* Standard Top Elcometer 415 FNF Integral Digital Coating Thickness Gauge for smooth surfaces ■ Elcometer 456 FNF Separate Digital Coating Thickness Gauge
Model T Elcometer 456 Standard FNF 1 Probe, 0 - 1500μm ■ Elcometer 1542 Cross Cut Set 6 x 1, 2, 3mm with ISO or ASTM Adhesive Tape ■ ■ Individual Instruments can be used in accordance with many other tests.
*A wide range of K-type temperature probes is also available. These are not supplied with the kit and must be ordered separately.
-
- Technical Information
-
Technical SpecificationElcometer Qualicoat Powder Coating Inspection Kit
Part Number Description Basic Top YKITQUALICOAT-1B YKITQUALICOAT-1T Elcometer Qualicoat Powder Coatings Inspection Kit Part Number Basic Top YKITQUALICOAT-1B YKITQUALICOAT-1T Description Elcometer Qualicoat Powder Coatings Inspection Kit
-
- Downloads
-
Downloads
-
Elcometer Qualicoat Powder Coating Inspection Kit Datasheet
- Part Numbers
-
Part NumbersElcometer Qualicoat Powder Coating Inspection Kit
-
Elcometer Basic Qualicoat Powder Coatings Inspection Kit- Part Number : YKITQUALICOAT-1B
-
Elcometer Top Qualicoat Powder Coatings Inspection Kit- Part Number : YKITQUALICOAT-1T
-
Elcometer Qualicoat Powder Coating Inspection Kit
- Protective Coatings
- Industrial Finishing
The Elcometer Qualicoat Powder Coating Inspection Kit provides the various test instrumentation required to meet the high standards of the Qualicoat Organisation.
Summary
Elcometer Qualicoat Powder Coating Inspection Kit
The Qualicoat Organisation brings together the ideals of several National Coating Associations into one quality label for powder coatings on aluminium architectural components. Qualicoat has established Specifications defining minimum requirements for the plant, test equipment, coating materials and finished products.
Within this quality label, Qualicoat identifies a range of inspection requirements to be undertaken with regards to the quality control of powder coated products.
Measurement parameters include:
- Appearance
- Impact and deformation
- Oven temperature
- Coating thickness
- Adhesion
Key Features
Elcometer Qualicoat Powder Coating Inspection Kit
Kit Contents:
Model Description Basic Top Elcometer 480 Statistical Glossmeter: 60° Model B Model T Elcometer 1506 Mandrel Bend Tester with 5mm and 8mm (0.20 and 0.31”) Mandrels ■ ■ Elcometer 1615 Base Unit and Tube Assembly ■ ■ Elcometer 1615 Kit B: ISO 6272/2 and BS 6496 ■ ■ Elcometer 1620 Manual Cupping Tester with Digital Gauge ■ ■ Elcometer 215 Oven Data Logger & Kit* Standard Top Elcometer 415 FNF Integral Digital Coating Thickness Gauge for smooth surfaces ■ Elcometer 456 FNF Separate Digital Coating Thickness Gauge
Model T Elcometer 456 Standard FNF 1 Probe, 0 - 1500μm ■ Elcometer 1542 Cross Cut Set 6 x 1, 2, 3mm with ISO or ASTM Adhesive Tape ■ ■ Individual Instruments can be used in accordance with many other tests.
*A wide range of K-type temperature probes is also available. These are not supplied with the kit and must be ordered separately.
Technical SpecificationElcometer Qualicoat Powder Coating Inspection KitPart Number Description Basic Top YKITQUALICOAT-1B YKITQUALICOAT-1T Elcometer Qualicoat Powder Coatings Inspection Kit Part Number Basic Top YKITQUALICOAT-1B YKITQUALICOAT-1T Description Elcometer Qualicoat Powder Coatings Inspection Kit Part NumbersElcometer Qualicoat Powder Coating Inspection Kit-
Elcometer Basic Qualicoat Powder Coatings Inspection Kit
- Part Number : YKITQUALICOAT-1B
-
Elcometer Top Qualicoat Powder Coatings Inspection Kit
- Part Number : YKITQUALICOAT-1T
-
-