International Standards
All Elcometer products are designed to comply with National and International Standards. We have a team of experts working with Standards bodies around the world, ensuring we have products fit for purpose, exceeding the demands of our customers.
We continuously review our products against current and new Standards and for the most up to date list, visit our online catalogue which provides the latest information on all new, current and superseded Standards which our products can be used in accordance with.
Below is a list of National and International Standards which are relevant to the products supplied by Elcometer. Additional information on these standards can be obtained by visiting the appropriate authority.
The latest National and International Standards have been identified. Those in Orange are current and those in Grey have been superseded but are still recognised in some industries.
A range of National and International Standards are listed below, please click on the relevant standard to go directly to the list.
Standard | Standard Title | Reference | Elcometer Model |
AATCC Method 8 | Colorfastness to Crocking - Crockmeter Method | Washability & Abrasion | 5750 |
Standard | Standard Title | Reference | Elcometer Model |
ACI 318 | Building Code Requirements for Structural Concrete and Commentary | Concrete Inspection | 331 |
Standard | Standard Title | Reference | Elcometer Model |
ANSI INCITS 322 | Information Technology - Card Durability Test Methods | Washability & Abrasion | 5135, 5155 |
ANSI/AWWA C 203 | AWWA Standard for Coal - Tar Protective Coatings and Linings for Steel Water Pipelines - Enamel and Tape - Hot Applied | Pinhole & Porosity | 280 |
ANSI/AWWA C 213 | AWWA C213-07 Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines | Pinhole & Porosity | 266 |
ANSI/AWWA C 213 | AWWA C213-07 Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines | Pinhole & Porosity | 236 |
ANSI/AWWA C 214 | AWWA C214-14 Tape Coatings for Steel Water Pipe | Pinhole & Porosity | 280 |
Standard | Standard Title | Reference | Elcometer Model |
AS 1580.108.2 | Paints and related materials: Methods of test - Dry Film Thickness-paint inspection gauge | Dry Film Thickness | 141 |
AS 1580.108.2 | Paints and related materials: Methods of test - Dry Film Thickness-paint inspection gauge | Dry Film Thickness | 121/4 |
AS 1580.408.4 | Paints and related materials: Methods of test - Adhesion (cross-cut) | Adhesion Testers | 107, 1542 |
AS 1580.408.4 | Paints and related materials: Methods of test - Adhesion (cross-cut) | Dry Film Thickness | 121/4 |
AS 1580.408.5 | Paints and related materials: Methods of test - Adhesion (Pull-off test) | Adhesion Testers | 106 |
AS 2331.1.3 | Methods of test for metallic and related coatings Method: Local thickness tests (Magnetic method) | Dry Film Thickness | 101, 211 |
Standard | Standard Title | Reference | Elcometer Model |
AS/NZS 1580.107.3 | Paints and related materials: Methods of test - Determination of wet film thickness by gauge | Wet Film & Powder Thickness | 112, 115, 3236, 3238 |
AS/NZS 1580.107.3 | Paints and related materials: Methods of test - Determination of wet film thickness by gauge | Wet Film & Powder Thickness | 3230 |
AS/NZS 1580.108.1 | Paints and related materials: Methods of test - Determination of dry film thickness on metallic substrates (Non-destructive methods) | Dry Film Thickness | 311 |
AS/NZS 1580.108.1 | Paints and related materials: Methods of test - Determination of dry film thickness on metallic substrates (Non-destructive methods) | Dry Film Thickness | 211 |
AS/NZS 1580.108.1 | Paints and related materials: Methods of test - Determination of dry film thickness on metallic substrates (Non-destructive methods) | Dry Film Thickness | 415 |
AS/NZS 1580.108.1 | Paints and related materials: Methods of test - Determination of dry film thickness on metallic substrates (Non-destructive methods) | Dry Film Thickness | 355, 456 |
AS/NZS 1580.204.1 | Paints and related materials: Methods of test Method - Fineness of grind | Fineness of Grind | 2020, 2041, 2050 |
AS/NZS 1580.213.1 | Paints and related materials: Methods of test - Relative dry hiding power | Film Application | Leneta |
AS/NZS 1580.214.1 | Paints and related materials: Methods of test - Consistency (Stormer viscometer) | Rotational & Krebs Viscosity | 2250 |
AS/NZS 1580.214.2 | Paints and related materials: Methods of test - Consistency - Flow cup | Viscosity Cups | 2354 cup 4 only |
AS/NZS 1580.214.5 | Paints and related materials: Methods of test - Consistency - Rotational viscometer | Rotational & Krebs Viscosity | 2300 |
AS/NZS 1580.402.1 | Paints and related materials: Methods of test - Bend test | Elasticity & Deformation | 1500, 1506 |
AS/NZS 1580.403.1 | Paints and related materials: Methods of test - Scratch resistance | Hardness & Scratch | 3000 Motorised 3000 Manual |
AS/NZS 1580.403.2 | Methods of test for paints and related materials: Abrasion resistance - Taber abraser | Washability & Abrasion | 5135, 5155 |
AS/NZS 1580.406.1 | Cots for day nursery, hospital and institutional use - Safety requirements | Elasticity & Deformation | 1615 |
AS/NZS 1580.408.5 | Methods of test for paints and related materials - Adhesion (Pull-off test) | Adhesion Testers | 106 |
AS/NZS 1580.408.5 | Methods of test for paints and related materials - Adhesion (Pull-off test) | Adhesion Testers | 506 |
AS/NZS 1580.408.5 | Methods of test for paints and related materials - Adhesion (Pull-off test) | Adhesion Testers | 510 |
AS/NZS 1580.459.1 | Paints and related materials: Methods of test - Resistance to washing | Washability & Abrasion | 1720 |
AS/NZS 1580.601.3 | Paints and related materials: Methods of test - Colour - Methods of colour measurement | Appearance Measurement | 6085 |
AS/NZS 1580.602.2 | Paints and related materials: Methods of test - Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° | Appearance Measurement | 480 |
AS/NZS 4266.2 | Constituted wood-based panels - Methods of test - Decorative overlaid panels | Washability & Abrasion | 5135, 5155 |
Standard | Standard Title | Reference | Elcometer Model |
ASME B46 | Surface Texture (Surface Roughness, Waviness, and Lay) | Surface Preparation | 7061, 7062 |
Standard | Standard Title | Reference | Elcometer Model |
ASTM B 244 | Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments | Dry Film Thickness | 355 |
ASTM B 499 | Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals | Dry Film Thickness | 101 |
ASTM B 499 | Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals | Dry Film Thickness | 211 |
ASTM B 499 | Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals | Dry Film Thickness | 415 |
ASTM B 499 | Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals | Dry Film Thickness | 355, 456 |
ASTM B 648 | Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor | Hardness & Scratch | 3101 |
ASTM C 1353 | Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser | Washability & Abrasion | 5135, 5155 |
ASTM C 1583 | Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method) | Adhesion Testers | 510 |
ASTM C 217 | Standard Test Method for Weather Resistance of Slate | Washability & Abrasion | 5135, 5155 |
ASTM C 241 | Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic | Washability & Abrasion | 5135, 5155 |
ASTM C 501 | Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser | Washability & Abrasion | 5135, 5155 |
ASTM C 523 | Method of Test for Light Reflectance of Acoustical Materials by the Integrating Sphere Reflectometer (Withdrawn 1988) | Appearance Measurement | 480 |
ASTM C 536 | Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing | Pinhole & Porosity | 266 |
ASTM C 536 | Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing | Pinhole & Porosity | 236 |
ASTM C 537 | Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage | Pinhole & Porosity | 266 |
ASTM C 537 | Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage | Pinhole & Porosity | 236 |
ASTM C 584 | Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products | Appearance Measurement | 480 |
ASTM C 609 | Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile | Appearance Measurement | 6085 |
ASTM C 805 | Standard Test Method for Rebound Number of Hardened Concrete | Concrete & Metal Detection | 181, 182 |
ASTM C 876-91 | Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete | Concrete & Metal Detection | 331 |
ASTM D 1044 | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion | Washability & Abrasion | 5135, 5155 |
ASTM D 1084-B | Standard Test Methods for Viscosity of Adhesives | Rotational & Krebs Viscosity | 2300 |
ASTM D 1084-C | Standard Test Methods for Viscosity of Adhesives | Rotational & Krebs Viscosity | 2250 |
ASTM D 1084-D | Standard Test Methods for Viscosity of Adhesives | Viscosity Cups | 2210 |
ASTM D 1131 | Standard Test Methods of Testing Rosin Oils (Withdrawn 2003) | Rotational & Krebs Viscosity | 2250 |
ASTM D 1186 | Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base (Withdrawn 2006) | Dry Film Thickness | 415 |
ASTM D 1186-B | Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base (Withdrawn 2006) - Electronic Gauges | Dry Film Thickness | 355, 456 |
ASTM D 1200 | Standard Test Method for Viscosity by Ford Viscosity Cup | Viscosity Cups | 2351, 2435 |
ASTM D 1210 | Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gauge | Fineness of Grind | 2020, 2041, 2050 |
ASTM D 1212-A | Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings - Wet Film Thickness Gage | Wet Film & Powder Thickness | 3230 |
ASTM D 1212-B | Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings - mPfund Gauge | Wet Film & Powder Thickness | 3233 |
ASTM D 1316 | Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer | Fineness of Grind | 2070 |
ASTM D 1400 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base (Withdrawn 2006) | Dry Film Thickness | 355, 456 |
ASTM D 1400 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base (Withdrawn 2006) | Dry Film Thickness | 415 |
ASTM D 1455 | Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish | Appearance Measurement | 480 |
ASTM D 1475 | Standard Test Method For Density of Liquid Coatings, Inks, and Related Products | Density | 1800 |
ASTM D 1640-03 | Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings | Film Application | 3505 |
ASTM D 1653 | Standard Test Methods for Water Vapor Transmission of Organic Coating Films | Drying Time & Permeability | 5100 |
ASTM D 1737 | Method of Test for Elongation of Attached Organic Coatings with Cylindrical Mandrel Apparatus (Withdrawn 1987) | Elasticity & Deformation | 1500, 1506 |
ASTM D 1792 - 06 | Standard Test Method for Long-Term Removability Properties of Emulsion Floor Polishes | Washability & Abrasion | 1720 |
ASTM D 2196 | Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer | Rotational & Krebs Viscosity | 2300 |
ASTM D 2198 - 02 | Test Method for Stain Removal from Multicolor Lacquers | Washability & Abrasion | 1720 |
ASTM D 2197 | Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion | Washability & Abrasion | 5750 |
ASTM D 2200 | Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces | Surface Preparation | 128 |
ASTM D 2240 | Standard Test Method for Rubber Property - Durometer Hardness | Hardness & Scratch | 3120 |
ASTM D 2244 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates | Appearance Measurement | 6085 |
ASTM D 2457 | Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics | Appearance Measurement | 480, 408 |
ASTM D 2486 | Standard Test Methods for Scrub Resistance of Wall Paints | Film Application | Leneta |
ASTM D 2486 | Standard Test Methods for Scrub Resistance of Wall Paints | Washability & Abrasion | 1720, 1720 Tool 2 |
ASTM D 2583 | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor | Hardness & Scratch | 3101 |
ASTM D 2794 | Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) | Elasticity & Deformation | 1615 |
ASTM D 2805 | Standard Test Method for Hiding Power of Paints by Reflectometry | Film Application | Leneta |
ASTM D 3206 - 08 | Standard Test Method for Soil Resistance of Floor Polishes | Washability & Abrasion | 1720 |
ASTM D 3359-B | Standard Test Methods for Measuring Adhesion by Tape Test | Adhesion Testers | 107, 1542 |
ASTM D 3359-B | Standard Test Methods for Measuring Adhesion by Tape Test | Dry Film Thickness | 121/4 Adhesion |
ASTM D 3363 | Standard Test Method for Film Hardness by Pencil Test | Hardness & Scratch | 501, 3080, 3086 |
ASTM D 3389 | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) | Washability & Abrasion | 5135, 5155 |
ASTM D 344 | Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts | Film Application | Leneta |
ASTM D 3450 | Standard Test Method for Washability Properties of Interior Architectural Coatings | Washability & Abrasion | 1720, 1720 Tool 4 |
ASTM D 3884 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) | Washability & Abrasion | 5135, 5155 |
ASTM D 4039 | Standard Test Method for Reflection Haze of High-Gloss Surfaces | Appearance Measurement | 480 |
ASTM D 4060 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser | Washability & Abrasion | 5135, 5155 |
ASTM D 4138-A | Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means | Dry Film Thickness | 141 |
ASTM D 4138-A | Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means | Dry Film Thickness | 121/4 |
ASTM D 4147 | Standard Practice for Applying Coil Coatings Using The Wire-Wound Drawdown Bar | Film Application | 4360, 4361 |
ASTM D 4212 | Standard Test Method for Viscosity by Dip-Type Viscosity Cups | Viscosity Cups | 2310 |
ASTM D 4212 | Standard Test Method for Viscosity by Dip-Type Viscosity Cups | Viscosity Cups | 2210 |
ASTM D 4213 | Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss | Washability & Abrasion | 1720, 1720 Tool 5 |
ASTM D 4213:92 | Spongeability and Washability Tester | Washability & Abrasion | 1720 Tool 3 |
ASTM D 4400 | Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator | Film Application | 4270 |
ASTM D 4414-A | Standard Practice for Measurement of Wet Film Thickness by Notch Gauges | Wet Film & Powder Thickness | 112, 115, 3236, 3238 |
ASTM D 4417-A | Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel | Surface Preparation | 125 |
ASTM D 4417-A | Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel | Surface Preparation | 127 |
ASTM D 4417-B | Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel | Surface Preparation | 123, 224 |
ASTM D 4417-C | Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel | Surface Preparation | 122, 124 |
ASTM D 4449 | Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance | Appearance Measurement | 480 |
ASTM D 4488 | Standard Guide for Testing Cleaning Performance of Products Intended for Use on Resilient Flooring and Washable Walls (Withdrawn 2009) | Washability & Abrasion | 1720 |
ASTM D 4541 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers | Adhesion Testers | 108, 508 |
ASTM D 4541 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers | Adhesion Testers | 510 |
ASTM D 4541 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers | Adhesion Testers | 106 |
ASTM D 4541 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers | Adhesion Testers | 506 |
ASTM D 4787 | Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates | Pinhole & Porosity | 266 |
ASTM D 4787 | Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates | Pinhole & Porosity | 236 |
ASTM D 4787 | Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates | Pinhole & Porosity | 280 |
ASTM D 4828 | Standard Test Methods for Practical Washability of Organic Coatings | Washability & Abrasion | 1720, 1720 Tool 3 |
ASTM D 4940 | Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blast Cleaning Abrasives | Surface Preparation | 138 Abrasive Kit |
ASTM D 5125 | Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups | Viscosity Cups | 2353, 2437 |
ASTM D 5150 | Standard Test Method for Hiding Power of Architectural Paints Applied by Roller | Film Application | Leneta |
ASTM D 5162 | Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates | Pinhole & Porosity | 280 |
ASTM D 5162-A | Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates | Pinhole & Porosity | 270 |
ASTM D 5162-B | Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates | Pinhole & Porosity | 266 |
ASTM D 5162-B | Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates | Pinhole & Porosity | 236 |
ASTM D 5178 | Standard Test Method for Mar Resistance of Organic Coatings | Washability & Abrasion | 5750 |
ASTM D 522-A | Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings | Elasticity & Deformation | 1510 |
ASTM D 522-B | Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings | Elasticity & Deformation | 1500, 1506 |
ASTM D 523 | Standard Test Method for Specular Gloss | Appearance Measurement | 480, 408 |
ASTM D 5420 | Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) | Elasticity & Deformation | 1615 |
ASTM D 562 | Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer | Rotational & Krebs Viscosity | 2250 |
ASTM D 5767 | Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces | Appearance Measurement | 480, 408 |
ASTM D 6037 | Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings | Washability & Abrasion | 5135, 5155 |
ASTM D 6132 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage | Dry Film Thickness | 500 |
ASTM D 6279 | Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings | Washability & Abrasion | 5750 |
ASTM D 6279 - 03 (2007) | Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings | Washability & Abrasion | 1720 |
ASTM D 6441 | Standard Test Methods for Measuring the Hiding Power of Powder Coatings | Film Application | Leneta |
ASTM D 7091 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals | Dry Film Thickness | 355, 456, 456IPC |
ASTM D 7091 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals | Dry Film Thickness | 415 |
ASTM D 7127 | Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument | Surface Preparation | 7061, 7062 |
ASTM D 7234 | Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers | Adhesion Testers | 106/6 |
ASTM D 7234 | Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers | Adhesion Testers | 506 |
ASTM D 7234-12 | Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers | Adhesion Testers | 510 |
ASTM D 7255 | Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Abraser Method) | Washability & Abrasion | 5135, 5155 |
ASTM D 7378-A | Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness | Wet Film & Powder Thickness | 155 |
ASTM D 823-C | Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels | Film Application | 4340 |
ASTM D 823-E | Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels | Film Application | 3505, 3520, 3525, 3530, 3540, 3550, 3560, 3570, 3580 |
ASTM D 856 | Method of Sampling and Testing Pine Tars and Pine-Tar Oils (Withdrawn 1991) | Rotational & Krebs Viscosity | 2250 |
ASTM D 891-B | Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals | Density | 1800 |
ASTM E 1164 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation | Appearance Measurement | 6085 |
ASTM E 2387 | Standard Practice for Goniometric Optical Scatter Measurements | Appearance Measurement | 480 |
ASTM E 2501 | Standard Specification for Light Source Products for Inspection of Fluorescent Coatings | Pinhole & Porosity | 260 |
ASTM E 308 | Standard Practice for Computing the Colors of Objects by Using the CIE System | Appearance Measurement | 6085 |
ASTM E 313 | Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates | Appearance Measurement | 6085 |
ASTM E 337-B | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) | Climatic Conditions | 116 |
ASTM E 376 | Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Testing Methods | Dry Film Thickness | 311 |
ASTM E 376 | Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Testing Methods | Dry Film Thickness | 355, 456 |
ASTM E 376 | Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Testing Methods | Dry Film Thickness | 415 |
ASTM E 430 | Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry | Appearance Measurement | 480, 408 |
ASTM E 70 | Standard Test Method for pH of Aqueous Solutions With the Glass Electrode | Surface Preparation | 148 |
ASTM E 797 | Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method | Material Thickness | 204 - 208 |
ASTM E 797 | Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method | Ultrasonic NDT | MTG2, MTG4, MTG6, MTG8 |
ASTM E 797 | Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method | Material Thickness | 204, 304 |
ASTM E 96 | Standard Test Methods for Water Vapor Transmission of Materials | Drying Time & Permeability | 5100 |
ASTM F 1319 | Standard Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Crockmeter Method) | Washability & Abrasion | 5750 |
ASTM F 1319 | Standard Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Crockmeter Method) | Washability & Abrasion | 1720, 1720 Tool 8 |
ASTM F 1478 | Standard Test Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method) | Washability & Abrasion | 5135, 5155 |
ASTM F 1978 | Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser | Washability & Abrasion | 5135, 5155 |
ASTM F 362 | Standard Test Method for Determining the Erasability of Inked Ribbons | Washability & Abrasion | 5135, 5155 |
ASTM F 510 | Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method | Washability & Abrasion | 5135, 5155 |
ASTM G 12 | Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel (Withdrawn 2013) | Dry Film Thickness | 101 |
ASTM G 12 | Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel (Withdrawn 2013) | Dry Film Thickness | 211 |
ASTM G 12 | Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel (Withdrawn 2013) | Dry Film Thickness | 355, 456 |
ASTM G 6 | Standard Test Method for Abrasion Resistance of Pipeline Coatings | Pinhole & Porosity | 270 |
ASTM G 62-A | Standard Test Methods for Holiday Detection in Pipeline Coatings - holidays such as pinholes and voids in thin-film coatings from 0.0254 to 0.254 mm (1 to 10 mils) | Pinhole & Porosity | 270 |
ASTM G 62-B | Standard Test Methods for Holiday Detection in Pipeline Coatings (detect thin spots in the coating) | Pinhole & Porosity | 266 |
ASTM G 62-B | Standard Test Methods for Holiday Detection in Pipeline Coatings (detect thin spots in the coating) | Pinhole & Porosity | 236 |
Standard | Standard Title | Reference | Elcometer Model |
BS 1344-11 | Methods of testing vitreous enamel finishes: High voltage test for articles for use under highly corrosive conditions | Pinhole & Porosity | 266 |
BS 1344-11 | Methods of testing vitreous enamel finishes: High voltage test for articles for use under highly corrosive conditions | Pinhole & Porosity | 236 |
BS 1881:201 | Testing concrete: Guide to the use of non-destructive methods of test for hardened concrete | Concrete & Metal Detection | 331 |
BS 1881:202 | Testing concrete: Recommendations for surface hardness testing by rebound hammer | Concrete & Metal Detection | 181, 182 |
BS 1881:204 | Testing concrete: Recommendations on the use of electromagnetic covermeters | Concrete & Metal Detection | 331 |
BS 1881:207 | Testing concrete: Recommendations for the assessment of concrete strength by near-to-surface tests | Adhesion Testers | 106/6, 506 |
BS 1881:207 | Testing concrete: Recommendations for the assessment of concrete strength by near-to-surface tests | Adhesion Testers | 510 |
BS 2842 | Specification for whirling hygrometer | Climatic Conditions | 116 |
BS 3900-A6:1971 | Methods of test for paints: Tests on liquid paints (excluding chemical tests) - Determination of flow time by use of flow cups. | Viscosity Cups | 2354 |
BS 3900-A7-2 | Methods of test for paints: Tests on liquid paints (excluding chemical tests) - Determination of the viscosity of paint at a high rate of shear | Rotational & Krebs Viscosity | 2300 |
BS 3900-C5-5B | Paints and varnishes: Determination of film thickness | Dry Film Thickness | 141 |
BS 3900-C5-5B | Paints and varnishes: Determination of film thickness | Dry Film Thickness | 121/4 |
BS 3900-C5-6A | Paints and varnishes: Determination of film thickness | Dry Film Thickness | 211 |
BS 3900-C5-6A | Paints and varnishes: Determination of film thickness | Dry Film Thickness | 355, 456 |
BS 3900-C5-6A | Paints and varnishes: Determination of film thickness | Dry Film Thickness | 415 |
BS 3900-C5-6B | Paints and varnishes: Determination of film thickness | Dry Film Thickness | 355, 456 |
BS 3900-C5-6B | Paints and varnishes: Determination of film thickness | Dry Film Thickness | 415 |
BS 3900-C5-7A | Methods of test for paints: Tests associated with paint film formation - Determination of film thickness | Wet Film & Powder Thickness | 3230 |
BS 3900-C5-7B | Methods of test for paints: Tests associated with paint film formation - Determination of film thickness | Wet Film & Powder Thickness | 112, 115, 3236, 3238 |
BS 3900-C5-7B | Methods of test for paints: Tests associated with paint film formation - Determination of film thickness | Wet Film & Powder Thickness | 154 |
BS 3900-D4 | Methods of test for paints: Optical tests on paint film - Comparison of contrast ratio (hiding power) of paints of the same type and colour | Film Application | Leneta |
BS 3900-D5 | Methods of test for paints: Optical tests on paint films - Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° | Appearance Measurement | 480 |
BS 3900-E1 | Methods of test for paints - Bend test (cylindrical mandrel) | Elasticity & Deformation | 1500 |
BS 3900-E11 | Paints and varnishes - Bend test (conical mandrel) | Elasticity & Deformation | 1510 |
BS 3900-E13 | Paints and varnishes: Rapid-deformation (impact resistance) tests - Falling-weight test, large-area indenter | Elasticity & Deformation | 1615 |
BS 3900-E19 | Determination of film hardness by pencil test | Hardness & Scratch | 501, 3080, 3086 |
BS 3900-E2 | Methods of test for paints: Methods of test for paints - Scratch test | Hardness & Scratch | 3000 Motorised 3000 Manual |
BS 3900-E4 | Methods of test for paints: Mechanical tests on paint films - Cupping test | Elasticity & Deformation | 1620 |
BS 3900-E6 | Methods of test for paints: Cross-cut test | Adhesion Testers | 107, 1542 |
BS 3900-E6 | Methods of test for paints: Cross-cut test | Dry Film Thickness | 121/4 Adhesion |
BS 3900-E9 | Paints and varnishes: Buchholz indentation test | Hardness & Scratch | 3095 |
BS 5411-11 | Measurement of Coating Thickness of Non-Magnetic Metallic and Vitreous or Porcelain Enamel Coatings on Magnetic Basis Metals (Magnetic Method) | Dry Film Thickness | 101 |
BS 5411-11 | Measurement of Coating Thickness of Non-Magnetic Metallic and Vitreous or Porcelain Enamel Coatings on Magnetic Basis Metals (Magnetic Method) | Dry Film Thickness | 355, 456 |
BS 5411-11 | Measurement of Coating Thickness of Non-Magnetic Metallic and Vitreous or Porcelain Enamel Coatings on Magnetic Basis Metals (Magnetic Method) | Dry Film Thickness | 211 |
BS 5411-11 | Measurement of Coating Thickness of Non-Magnetic Metallic and Vitreous or Porcelain Enamel Coatings on Magnetic Basis Metals: Magnetic Method | Dry Film Thickness | 415 |
BS 5411-3 | Methods of Test for Metallic and related coatings Part 3: Eddy Current Method for Measurement of Coating Thickness of Non-conductive coatings on non-magnetic basis metals | Dry Film Thickness | 355, 456 |
BS 5411-3 | Methods of Test for Metallic and related coatings Part 3: Eddy Current Method for Measurement of Coating Thickness of Non-conductive coatings on non-magnetic basis metals | Dry Film Thickness | 415 |
BS 5599 | Specification for hard anodic oxidation coatings on aluminium and its alloys for engineering purposes | Dry Film Thickness | 415 |
BS 5599 | Specification for hard anodic oxidation coatings on aluminium and its alloys for engineering purposes | Dry Film Thickness | 355, 456 |
BS 5599 | Specification for hard anodic oxidation coatings on aluminium and its alloys for engineering purposes | Hardness & Scratch | 5135, 5155 |
BS 6496:1984 | Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with powder organic coatings | Elasticity & Deformation | 1615 |
BS 7079-B4 | Preparation of steel substrates before application of paints and related products Group B: Methods for the assessment of surface cleanliness - Part B4: Guide to the estimation of the probability of condensation on a surface to be painted | Climatic Conditions | 319 |
BS 7079-B4 | Preparation of steel substrates before application of paints and related products Group B: Methods for the assessment of surface cleanliness - Part B4: Guide to the estimation of the probability of condensation on a surface to be painted | Climatic Conditions | 320 |
BS 7079-B4 | Preparation of steel substrates before application of paints and related products Group B: Methods for the assessment of surface cleanliness - Part B4: Guide to the estimation of the probability of condensation on a surface to be painted | Climatic Conditions | 309 |
BS 7079-C5 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates. Replica tape method for the determination of the surface profile (AMD 15516) | Surface Preparation | 122 |
BS 7442-3.2 | Rubber or plastics covered rollers. Method of test. Determination of Shore hardness | Hardness & Scratch | 3120 |
BS 7479 | Method for salt spray corrosion tests in artificial atmospheres | Hardness & Scratch | 1537 |
BS 7793-2 | Vitreous enamel coatings for use on bolted steel panels. Specification for coatings on bolted steel panels for use in industrial liquid storage tanks | Pinhole & Porosity | 270 |
BS 8110 | Structural use of concrete. Code of practice for design and construction | Concrete & Metal Detection | 331 |
BS 8493 | Light reflectance value (LRV) of a surface. Method of test | Appearance Measurement | 6085 |
Standard | Standard Title | Reference | Elcometer Model |
Concrete Society Technical Report 60 | Electrochemical tests for reinforcement corrosion | Concrete & Metal Detection | 331 |
Standard | Standard Title | Reference | Elcometer Model |
CP 110 | Code of practice for the structural use of concrete. Design, materials and workmanship | Concrete & Metal Detection | 331 |
Standard | Standard Title | Reference | Elcometer Model |
DIN 1045 | Extension of Reinforced Concrete Design Modules with Design | Concrete & Metal Detection | 331 |
DIN 1048 | Testing of Drycrete Moisture Stop | Concrete & Metal Detection | 181, 182 |
DIN 1048-2 | Testing Concrete; Testing of Hardened Concrete | Adhesion Testers | 106/6, 506 |
DIN 1048-2 | Testing Concrete; Testing of Hardened Concrete | Adhesion Testers | 510 |
DIN 4768 | Comparison of Surface Roughness Values | Surface Preparation | 7061, 7062 |
DIN 5033-2 | Colorimetry; Standard colorimetric Systems | Appearance Measurement | 6085 |
DIN 5033-3 | Colorimetry; colorimetric measures | Appearance Measurement | 6085 |
DIN 5033-4 | Colorimetry; spectrophotometric method | Appearance Measurement | 6085 |
DIN 5033-7 | Measuring conditions for object colours | Appearance Measurement | 6085 |
DIN 50981 | Measurement of coating thickness; magnetic methods for measurement of thickness of non-ferromagnetic coatings on ferromagnetic material | Dry Film Thickness | 211 |
DIN 50981 | Measurement of coating thickness; magnetic methods for measurement of thickness of non-ferromagnetic coatings on ferromagnetic material | Dry Film Thickness | 355, 456 |
DIN 50981 | Measurement of coating thickness; magnetic methods for measurement of thickness of non-ferromagnetic coatings on ferromagnetic material | Dry Film Thickness | 415 |
DIN 50984 | Measurement of coating thickness; eddy current method for measurement of thickness of electrical non-conductive coatings on non-ferromagnetic basic metals | Dry Film Thickness | 355, 456 |
DIN 50984 | Measurement of coating thickness; eddy current method for measurement of thickness of electrical non-conductive coatings on non-ferromagnetic basic metals | Dry Film Thickness | 415 |
DIN 50986 | Paints and varnishes - Determination of dry-film thickness using the wedge-cut method (scribe and drill method) | Dry Film Thickness | 121/4 |
DIN 50896 | Metal Twist Drill Bit | Dry Film Thickness | 141 |
DIN 52347 | Testing of glass and plastics; abrasion test; method using abrasion wheels and measurement of scattered light | Washability & Abrasion | 5135, 5155 |
DIN 53109 | Testing of Paper and Board - Determination of abrasion by the Abrasion Wheel Method | Washability & Abrasion | 5135, 5155 |
DIN 53152 | Paints and varnishes; bend test on coatings; method using cylindrical mandrel | Elasticity & Deformation | 1500 |
DIN 53153 | Testing of Paints, Varnishes and Similar Coating Materials; Buchholz Indentation Test on Paint Coatings and Similar Coatings | Hardness & Scratch | 3095 |
DIN 53156 | Testing of paints, varnishes and similar coating materials; cupping test - An paint coatings and similar coatings with optical evaluation | Elasticity & Deformation | 1620 |
DIN 53162-2 | Testing paints, varnishes and similar products | Film Application | Leneta |
DIN 53167 | Paints, varnishes and similar coating materials; salt spray test on coatings | Hardness & Scratch | 1538 |
DIN 53203 | Testing of paints and other pigment vehicle systems; estimation of the coarseness (respectively fineness) of dispersion by the grindometer | Fineness of Grind | 2020, 2041, 2050 |
DIN 53211 | Paints, Varnishes and Similar Coating Materials Determination of Flow Time using the DIN Flow Cup | Viscosity Cups | 2350, 2434 cup 4 only |
DIN 53217-2 | Determination of density of paints, varnishes and similar coating materials by the pyknometer method | Density | 1800 |
DIN 53232 | Testing of paints, varnishes and similar coating materials - Measurement of the adhesion of paint coatings and similar coatings according to the pull-off method | Elasticity & Deformation | 1620 |
DIN 53505 | Testing of rubber - Shore A and Shore D hardness test | Hardness & Scratch | 3120 |
DIN 53754 | Testing of plastics; determination of abrasion, abrasive disk method | Washability & Abrasion | 5135, 5155 |
DIN 53778-2:1983 | Emulsion paints for interior use; evaluation of cleanability and of wash and scrub resistance of coatings | Washability & Abrasion | 1720, 1720 Tool 1 |
DIN 53799 | Decorative laminated sheets on basis of aminoplastic resins; test method | Hardness & Scratch | 3000 Motorised 3000 Manual |
DIN 53799 | Decorative laminated sheets on basis of aminoplastic resins; test method | Washability & Abrasion | 5135, 5155 |
DIN 55670 | Paints and varnishes - Method for testing paint coatings for pores and cracks using high-voltage | Pinhole & Porosity | 266 |
DIN 55670 | Paints and varnishes - Method for testing paint coatings for pores and cracks using high-voltage | Pinhole & Porosity | 236 |
DIN 6174 | Colorimetric evaluation of colour coordinates and colour differences according to the approximately uniform CIELAB colour space | Appearance Measurement | 6085 |
DIN 67530 | Reflectometer as a means for gloss assessment of plane surfaces of paint coatings and plastics | Appearance Measurement | 480, 408 |
DIN 68861-2 | Furniture surfaces - Behavior at abrasion | Washability & Abrasion | 5135, 5155 |
Standard | Standard Title | Reference | Elcometer Model |
EC 2 | Design of concrete structures | Concrete & Metal Detection | 331 |
Standard | Standard Title | Reference | Elcometer Model |
ECCA T1 | Coating Thickness | Dry Film Thickness | 415 |
ECCA T1 | Coating Thickness | Dry Film Thickness | 355, 456 |
ECCA T11 | M.E.K./Solvent Rubbing Test | Washability & Abrasion | 1720, 1720 Tool 9B |
ECCA T12 | Scratch Resistence | Hardness & Scratch | 3000 Motorised 3000 Manual |
ECCA T16 | Abrasive Resistense | Washability & Abrasion | 5135, 5155 |
ECCA T2 | Specular Gloss | Appearance Measurement | 480 |
ECCA T4 | Pencil Hardness | Hardness & Scratch | 501, 3080, 3086 |
ECCA T5 | Resistence to Rapid Deformation | Elasticity & Deformation | 1615 |
ECCA T6 | Adhesion after Indentation | Adhesion Testers | 107, 1542 |
ECCA T6 | Adhesion after Indentation | Dry Film Thickness | 121/4 Adhesion |
ECCA T6 | Adhesion after Indentation | Elasticity & Deformation | 1620 |
Standard | Standard Title | Reference | Elcometer Model |
EN 10049 | Measurement of roughness average - Ra and peak count RPc on metallic flat products | Surface Preparation | 7061, 7062 |
EN 1015 | Methods of test for mortar for masonry - Determination of flexural and compressive strength of hardened mortar | Adhesion Testers | 510 |
EN 12206-1:2004 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Coatings prepared from coating powder | Elasticity & Deformation | 1615 |
EN 12373-11 | Aluminium and aluminium alloys - Anodizing - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60°, and 85° | Appearance Measurement | 480 |
EN 12373-12 | Aluminium and aluminium alloys -Anodizing - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments | Appearance Measurement | 6085 |
EN 12504-2 | Testing concrete in structures: Non-destructive testing - Determination of rebound number | Concrete & Metal Detection | 181, 182 |
EN 12636 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion concrete to concrete | Adhesion Testers | 106/6, 506 |
EN 12636 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion concrete to concrete | Adhesion Testers | 510 |
EN 12956 | Wallcoverings in roll form - Determination of dimensions, straightness, spongeability and washability | Washability & Abrasion | 1720 |
EN 13144 | Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test | Adhesion Testers | 106, 506 |
EN 13144 | Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test | Adhesion Testers | 510 |
EN 13329 | Laminate floor coverings - Specifications, requirements and test methods | Washability & Abrasion | 5135, 5155 |
EN 13523-1 | Coil coated metals: Test methods - Film thickness | Dry Film Thickness | 415 |
EN 13523-1 | Coil coated metals: Test methods - Film thickness | Dry Film Thickness | 355, 456 |
EN 13523-11 | Coil coated metals: Test methods - Resistance to solvents (rubbing test) | Washability & Abrasion | 1720, 1720 Tool 9B |
EN 13523-12 | Coil coated metals: Test methods - Resistance to scratching | Hardness & Scratch | 3000 Motorised 3000 Manual |
EN 13523-15 | Coil coated metal: Test methods - Metamerism | Appearance Measurement | 6085 |
EN 13523-16 | Coil coated metals: Test methods - Resistance to abrasion | Washability & Abrasion | 5135, 5155 |
EN 13523-2 | Coil coated metals: Test methods - Gloss | Appearance Measurement | 480 |
EN 13523-4 | Coil coated metals: Test methods - Pencil hardness | Hardness & Scratch | 501, 3080, 3086 |
EN 13523-5 | Coil coated metals: Test methods - Pencil hardness | Elasticity & Deformation | 1615 |
EN 13523-6 | Coil coated metals: Test methods - Adhesion after indentation (cupping test) | Adhesion Testers | 107, 1542 |
EN 13523-6 | Coil coated metals: Test methods - Adhesion after indentation (cupping test) | Dry Film Thickness | 121/4 Adhesion |
EN 13523-6 | Coil coated metals: Test methods - Adhesion after indentation (cupping test) | Elasticity & Deformation | 1620 |
EN 13696 | Wood flooring: Test methods to determine elasticity and resistance to wear and impact resistance | Washability & Abrasion | 5135, 5155 |
EN 14127 | Non-destructive testing: Ultrasonic thickness measurement | Ultrasonic NDT | MTG2, MTG4, MTG6, MTG8 |
EN 14127 | Non-destructive testing: Ultrasonic thickness measurement | Ultrasonic NDT | PTG6, PTG8 |
EN 14127 | Non-destructive testing: Ultrasonic thickness measurement | Material Thickness | 204, 304 |
EN 14127 | Non-destructive testing: Ultrasonic thickness measurement | Material Thickness | 307 |
EN 14323 | Wood-based panels: Melamine faced boards for interior uses - Test methods | Washability & Abrasion | 5135, 5155 |
EN 14327 | Leather, physical and mechanical tests: Determination of abrasion resistance of automotive leather | Washability & Abrasion | 5135, 5155 |
EN 14354 | Wood-based panels: Wood veneer floor covering | Washability & Abrasion | 5135, 5155 |
EN 14430 | Vitreous and porcelain enamels - High voltage test | Pinhole & Porosity | 266 |
EN 14430 | Vitreous and porcelain enamels - High voltage test | Pinhole & Porosity | 236 |
EN 14431 | Vitreous and porcelain enamels: Characteristics of the enamel coatings applied to steel panels intended for architecture | Washability & Abrasion | 5135, 5155 |
EN 14688 | Sanitary appliances: Wash basins - Functional requirements and test methods | Washability & Abrasion | 5135, 5155 |
EN 14864 | Vitreous and porcelain enamels: Enamel coatings applied to steel for writing surfaces - Specification | Washability & Abrasion | 5135, 5155 |
EN 1504-2 | Products and systems for the protection and repair of concrete structures: Definitions, requirements, quality control and evaluation of conformity - Surface protection systems for concrete | Washability & Abrasion | 5135, 5155 |
EN 15317 | Non-destructive testing: Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment | Material Thickness | 204 - 208 |
EN 15317 | Non-destructive testing: Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment | Ultrasonic NDT | MTG2, MTG4, MTG6, MTG8 |
EN 15317 | Non-destructive testing: Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment | Ultrasonic NDT | PTG6, PTG8 |
EN 15317 | Non-destructive testing: Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment | Material Thickness | 204, 304 |
EN 15317 | Non-destructive testing: Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment | Material Thickness | 307 |
EN 1542 | Products and systems for the protection and repair of concrete structures: Test methods - Measurement of bond strength by pull-off | Adhesion Testers | 506, 106/6 |
EN 1542 | Products and systems for the protection and repair of concrete structures: Test methods - Measurement of bond strength by pull-off | Adhesion Testers | 510 |
EN 21524 | Paints and Varnishes - Determination of Fineness of Grind | Fineness of Grind | 2020, 2041, 2050 |
EN 22063 | Metallic and other inorganic coatings: Thermal spraying. Zinc, aluminium and their alloys | Hardness & Scratch | 1537 |
EN 233/C3.2-A | Wallcoverings in roll form: Specification for finished wallpapers, wall vinyls and plastics wall coverings | Washability & Abrasion | 1720, 1720 Tool ST1 |
EN 233/C3.2-B | Wallcoverings in roll form: Specification for finished wallpapers, wall vinyls and plastics wall coverings | Washability & Abrasion | 1720, 1720 Tool ST2 |
EN 233/C3.2-C | Wallcoverings in roll form: Specification for finished wallpapers, wall vinyls and plastics wall coverings | Washability & Abrasion | 1720, 1720 Tool ST3 |
EN 24624 | Paints and varnishes - Pull-off test | Adhesion Testers | 106 |
EN 24624 | Paints and varnishes - Pull-off test | Adhesion Testers | 506 |
EN 24624 | Paints and varnishes - Pull-off test | Adhesion Testers | 510 |
EN 438-2 | High-pressure decorative laminates (HPL): Sheets based on thermosetting resins (usually called laminates) - Determination of properties | Hardness & Scratch | 3092 |
EN 438-2 | High-pressure decorative laminates (HPL): Sheets based on thermosetting resins (usually called laminates) - Determination of properties | Hardness & Scratch | 3025 |
EN 438-2 | High-pressure decorative laminates (HPL): Sheets based on thermosetting resins (usually called laminates) - Determination of properties | Washability & Abrasion | 5135, 5155 |
EN 60730-1-A | Automatic electrical controls for household and similar use - General requirements | Washability & Abrasion | 1720 Tool 10 |
EN 660-2 | Resilient floor coverings: Determination of wear resistance - Frick-Taber test | Washability & Abrasion | 5135, 5155 |
Standard | Standard Title | Reference | Elcometer Model |
P-D-220D | Federal Specification: Detergent, General purpose | Washability & Abrasion | 1720 |
P-R-1760 | Washability & Abrasion | 1720 | |
P-W-155C | Federal Specification: Wax, Floor, Water-emulsion | Washability & Abrasion | 1720 |
TT-P-26C(1) | Federal Specification: Paint, Inferior, white, tints and black, fire retardant | Washability & Abrasion | 1720 |
TT-P-29K | Federal Specification, Paint, Latex | Washability & Abrasion | 1720 |
TT-P-30E(1) | Paint, ALKYD, Odorless, Interior, Flat, White and Tints | Washability & Abrasion | 1720 |
TT-P-47G | Paint, Oil (Nonpenetrating - Flat, Ready-mixed tints and white) (Superseding TT-P-47F) | Washability & Abrasion | 1720 |
TT-E-505B | Federal Specification: Enamel (Odorless, ALKYD, Interior, High Gloss) | Washability & Abrasion | 1720 |
TT-E-506K(1) | Federal Specification: Enamel, ALKYD, Gloss, Tints and White | Washability & Abrasion | 1720 |
TT-E-509C | Federal Specification: Ennamel, Odorless, ALKYD, Interior, Semigloss, White and Tints | Washability & Abrasion | 1720 |
TT-C-535B(2) | Federal Specification: Coating, Epoxy, Two Component, for interior use on Metal, Wood, Wallboard, Painted Surfaces concrete and masonry | Washability & Abrasion | 1720 |
TT-C-555B(1) | Coating, Textured (For Interior and Exterior Masonry Surfaces) | Washability & Abrasion | 1720 |
Standard | Standard Title | Reference | Elcometer Model |
Fiat 50411 | Hardness Testers | Hardness & Scratch | 3120 |
Standard | Standard Title | Reference | Elcometer Model |
Ford BN108-02 | Resistence to Abrasion - Taber Abraser | Washability & Abrasion | 5135, 5155 |
Standard | Standard Title | Reference | Elcometer Model |
FTMS 141 4121 | Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and Testing | Film Application | Leneta |
FTMS 141 4183 | Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and Testing - Specific Gravity of Solvents and Thinners | Density | 1800 |
FTMS 141 4411.1 | Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and testing - Fineness of Grind | Fineness of Grind | 2020, 2041, 2050 |
FTMS 141 4494.1 | Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and Testing - Sag Test (Multinotch Blade) | Film Application | 4270 |
FTMS 141 Method 6141 | Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and Testing - Washability | Washability & Abrasion | 1720 |
FTMS 141 Method 6142 | Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and Testing - Scrub Resistence | Washability & Abrasion | 1720 |
FTMS Method 536/6701 | Federal Test Method - Cleaning Efficiency | Washability & Abrasion | 1720 |
Standard | Standard Title | Reference | Elcometer Model |
GM9515P | Federal Test Method - Cleaning Efficiency | Washability & Abrasion | 5135, 5155 |
GME 60269 | Test Method for Determinating the Abrasion Resistence of Metallized, Painted, Printed etc - Plastic Parts | Washability & Abrasion | 1720, 1720 Tool 9 |
Standard | Standard Title | Reference | Elcometer Model |
IMO MSC.215(82) | Performance Standard for Protective Coatings for Dedicated seawater Ballast Tanks in all types of ships and double-side spaces of Bulk Carriers | Climatic Conditions | 319 |
IMO MSC.215(82) | Performance Standard for Protective Coatings for Dedicated seawater Ballast Tanks in all types of ships and double-side spaces of Bulk Carriers | Climatic Conditions | 320 |
IMO MSC.215(82) | Performance Standard for Protective Coatings for Dedicated seawater Ballast Tanks in all types of ships and double-side spaces of Bulk Carriers | Dry Film Thickness | 355, 456 |
IMO MSC.215(82) | Performance Standard for Protective Coatings for Dedicated seawater Ballast Tanks in all types of ships and double-side spaces of Bulk Carriers | Surface Preparation | 142 |
IMO MSC.215(82) | Performance Standard for Protective Coatings for Dedicated seawater Ballast Tanks in all types of ships and double-side spaces of Bulk Carriers | Surface Preparation | 138 |
IMO MSC.215(82) | Performance Standard for Protective Coatings for Dedicated seawater Ballast Tanks in all types of ships and double-side spaces of Bulk Carriers | Surface Preparation | 128 |
IMO MSC.215(82) | Performance Standard for Protective Coatings for Dedicated seawater Ballast Tanks in all types of ships and double-side spaces of Bulk Carriers | Surface Preparation | 125 |
IMO MSC.244(83) | Adoption of Performance standard for protective coatings for void spaces on bulk carriers and oil tankers | Climatic Conditions | 319 |
IMO MSC.244(83) | Adoption of Performance standard for protective coatings for void spaces on bulk carriers and oil tankers | Climatic Conditions | 320 |
IMO MSC.244(83) | Adoption of Performance standard for protective coatings for void spaces on bulk carriers and oil tankers | Dry Film Thickness | 355, 456 |
IMO MSC.244(83) | Adoption of Performance standard for protective coatings for void spaces on bulk carriers and oil tankers | Surface Preparation | 142 |
IMO MSC.215(82) | Performance Standard for Protective Coatings for Dedicated seawater Ballast Tanks in all types of ships and double-side spaces of Bulk Carriers | Surface Preparation | 138 |
IMO MSC.215(82) | Performance Standard for Protective Coatings for Dedicated seawater Ballast Tanks in all types of ships and double-side spaces of Bulk Carriers | Surface Preparation | 128 |
IMO MSC.215(82) | Performance Standard for Protective Coatings for Dedicated seawater Ballast Tanks in all types of ships and double-side spaces of Bulk Carriers | Surface Preparation | 125 |
IMO MSC.244(83) | Adoption of Performance standard for protective coatings for void spaces on bulk carriers and oil tankers | Climatic Conditions | 319 |
IMO MSC.244(83) | Adoption of Performance standard for protective coatings for void spaces on bulk carriers and oil tankers | Climatic Conditions | 320 |
IMO MSC.244(83) | Adoption of Performance standard for protective coatings for void spaces on bulk carriers and oil tankers | Dry Film Thickness | 355, 456 |
IMO MSC.244(83) | Adoption of Performance standard for protective coatings for void spaces on bulk carriers and oil tankers | Surface Preparation | 142 |
IMO MSC.244(83) | Adoption of Performance standard for protective coatings for void spaces on bulk carriers and oil tankers | Surface Preparation | 138 |
IMO MSC.244(83) | Adoption of Performance standard for protective coatings for void spaces on bulk carriers and oil tankers | Surface Preparation | 128 |
IMO MSC.244(83) | Adoption of Performance standard for protective coatings for void spaces on bulk carriers and oil tankers | Surface Preparation | 125 |
Standard | Standard Title | Reference | Elcometer Model |
ISO 10074 | Anodizing of aluminium and its alloys: Specification for hard anodic oxidation coatings on aluminium and its alloys | Washability & Abrasion | 5135, 5155 |
ISO 105-X12 | Textiles: Tests for colour fastness - Colour fastness to rubbing | Washability & Abrasion | 5750 |
ISO 105-X12 | Textiles: Tests for colour fastness - Colour fastness to rubbing | Washability & Abrasion | 1720, 1720 Tool 8 |
ISO 11998 | Paints and varnishes: Determination of wet-scrub resistance and cleanability of coatings | Washability & Abrasion | 1720, 1720 Tool 6 |
ISO 13803 | Paints and varnishes: Determination of haze on paint films at 20 degrees | Appearance Measurement | 480 |
ISO 1461 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods | Dry Film Thickness | 355, 456 |
ISO 14654 | Epoxy-coated steel for the reinforcement of concrete | Pinhole & Porosity | 270 |
ISO 14656 | Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete | Washability & Abrasion | 5135, 5155 |
ISO 1518-1:2011 | Paints and varnishes: Determination of scratch resistance - Constant-loading method | Hardness & Scratch | 3000 Motorised 3000 Manual |
ISO 15184 | Paints and varnishes: Determination of film hardness by pencil test | Hardness & Scratch | 501, 3080, 3086 |
ISO 1519-1 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure: Polyethylene (PE) - Specifications for pipes, fittings and the system | Elasticity & Deformation | 1500 |
ISO 1519-2 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure: Polyethylene (PE) - Guidance for the assessment of conformity | Elasticity & Deformation | 1506 |
ISO 1520 | Paints and varnishes - Cupping test | Elasticity & Deformation | 1620 |
ISO 1524 | Paints, varnishes and printing inks - Determination of fineness of grind | Fineness of Grind | 2020, 2041, 2050 |
ISO 16276-1 | Corrosion protection of steel structures by protective paint systems: Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Pull-off testing | Adhesion Testers | 106 |
ISO 16276-1 | Corrosion protection of steel structures by protective paint systems: Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Pull-off testing | Adhesion Testers | 506 |
ISO 16276-1 | Corrosion protection of steel structures by protective paint systems: Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Pull-off testing | Adhesion Testers | 510 |
ISO 16276-1 | Corrosion protection of steel structures by protective paint systems: Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Pull-off testing | Adhesion Testers | 108, 508 |
ISO 16276-2 | Corrosion protection of steel structures by protective paint systems: Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Cross-cut testing and X-cut testing | Adhesion Testers | 107, 1542 |
ISO 16276-2 | Corrosion protection of steel structures by protective paint systems: Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Cross-cut testing and X-cut testing | Dry Film Thickness | 121/4 Adhesion |
ISO 17025 | General requirements for the competence of testing and calibration laboratories | Appearance Measurement | 480 |
ISO 19840 | Paints and varnishes: Corrosion protection of steel structures by protective paint systems - Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces | Dry Film Thickness | 355, 456, 456IPC |
ISO 2063 | Thermal spraying: Metallic and other inorganic coatings - Zinc, aluminium and their alloys | Dry Film Thickness | 355, 456 |
ISO 2063 | Thermal spraying: Metallic and other inorganic coatings - Zinc, aluminium and their alloys | Hardness & Scratch | 1537 |
ISO 2178 | Non-magnetic coatings on magnetic substrates: Measurement of coating thickness (Magnetic method) | Dry Film Thickness | 101 |
ISO 2178 | Non-magnetic coatings on magnetic substrates: Measurement of coating thickness - Magnetic method | Dry Film Thickness | 211 |
ISO 2360 | Non-conductive coatings on non-magnetic electrically conductive basis materials: Measurement of coating thickness (Amplitude-sensitive eddy-current method) | Dry Film Thickness | 415 |
ISO 2360 | Non-conductive coatings on non-magnetic electrically conductive basis materials: Measurement of coating thickness (Amplitude-sensitive eddy-current method) | Dry Film Thickness | 355, 456 |
ISO 2409 | Paints and varnishes: Cross-cut test | Adhesion Testers | 107, 1542 |
ISO 2409 | Paints and varnishes: Cross-cut test | Dry Film Thickness | 121/4 |
ISO 2431 | Paints and varnishes: Determination of flow time by use of flow cups | Viscosity Cups | 2353, 2437 |
ISO 24338 | Laminate floor coverings: Determination of abrasion resistance | Rotational & Krebs Viscosity | 5135, 5155 |
ISO 2555 | Plastics: Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield Test method | Washability & Abrasion | 2300 |
ISO 2746 | Vitreous and porcelain enamels - High voltage test | Pinhole & Porosity | 266, 280 |
ISO 2746 | Vitreous and porcelain enamels - High voltage test | Pinhole & Porosity | 236, 280 |
ISO 2808 | Paints and varnishes - Determination of film thickness | Dry Film Thickness | 311, 456IPC |
ISO 2808 Method 10 | Paints and varnishes: Determination of film thickness - Ultrasonic thickness gauge | Dry Film Thickness | 500 |
ISO 2808-11B | Paints and varnishes - Determination of film thickness | Dry Film Thickness | 311 |
ISO 2808-12 | Paints and varnishes - Determination of film thickness | Dry Film Thickness | 415 |
ISO 2808-12 | Paints and varnishes - Determination of film thickness | Dry Film Thickness | 355, 456 |
ISO 2808-12 | Paints and varnishes - Determination of film thickness | Dry Film Thickness | 355, 456 |
ISO 2808-12 | Paints and varnishes - Determination of film thickness | Dry Film Thickness | 355, 456 |
ISO 2808-12A | Paints and varnishes: Determination of film thickness - Magnetic-induction gauge | Dry Film Thickness | 311 |
ISO 2808-1A | Paints and varnishes: Determination of film thickness - Comb gauge | Wet Film & Powder Thickness | 112, 115, 3236, 3238 |
ISO 2808-1A | Paints and varnishes: Determination of film thickness - Comb gauge | Wet Film & Powder Thickness | 154 |
ISO 2808-1B | Paints and varnishes: Determination of film thickness - Wheel gauge | Wet Film & Powder Thickness | 3230 |
ISO 2808-5B | Paints and varnishes: Determination of film thickness - By difference in mass | Dry Film Thickness | 141 |
ISO 2808-5B | Paints and varnishes: Determination of film thickness - By difference in mass | Dry Film Thickness | 121/4 |
ISO 2808-6A | Paints and varnishes: Determination of film thickness - Cross-sectioning | Dry Film Thickness | 211 |
ISO 2808-6A | Paints and varnishes: Determination of film thickness - Cross-sectioning | Dry Film Thickness | 355, 456 |
ISO 2808-6A | Paints and varnishes: Determination of film thickness - Cross-sectioning | Dry Film Thickness | 415 |
ISO 2808-6B | Paints and varnishes: Determination of film thickness - Wedge cut | Dry Film Thickness | 121/4 |
ISO 2808-6B | Paints and varnishes: Determination of film thickness - Wedge cut | Dry Film Thickness | 355, 456 |
ISO 2808-6B | Paints and varnishes: Determination of film thickness - Wedge cut | Dry Film Thickness | 415 |
ISO 2808-6B | Paints and varnishes: Determination of film thickness - Wedge cut | Dry Film Thickness | 141 |
ISO 2808-7A | Paints and varnishes: Determination of film thickness - Magnetic pull-off gauge | Dry Film Thickness | 211 |
ISO 2808-7A | Paints and varnishes: Determination of film thickness - Magnetic pull-off gauge | Wet Film & Powder Thickness | 3230 |
ISO 2808-7B | Paints and varnishes: Determination of film thickness - Magnetic-flux gauge | Wet Film & Powder Thickness | 112, 115, 3236, 3238 |
ISO 2808-7B | Paints and varnishes: Determination of film thickness - Magnetic-flux gauge | Wet Film & Powder Thickness | 154 |
ISO 2808-7C | Paints and varnishes: Determination of film thickness - Magnetic-induction gauge | Dry Film Thickness | 355, 456 |
ISO 2808-7C | Paints and varnishes: Determination of film thickness - Magnetic-induction gauge | Dry Film Thickness | 415 |
ISO 2808-7C | Paints and varnishes: Determination of film thickness - Magnetic-induction gauge | Dry Film Thickness | 311 |
ISO 2808-7D | Paints and varnishes: Determination of film thickness - Eddy-current gauge | Dry Film Thickness | 311 |
ISO 2808-7D | Paints and varnishes: Determination of film thickness - Eddy-current gauge | Dry Film Thickness | 355, 456 |
ISO 2808-7D | Paints and varnishes: Determination of film thickness - Eddy-current gauge | Dry Film Thickness | 415 |
ISO 2811-1 | Paints and varnishes: Determination of density - Pyknometer method | Density | 1800 |
ISO 2813 | Paints and varnishes: Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees | Appearance Measurement | 480, 408 |
ISO 2814 | Paints and varnishes: Comparison of contrast ratio (hiding power) of paints of the same type and colour | Film Application | Leneta |
ISO 2815 | Paints and varnishes: Buchholz indentation test | Hardness & Scratch | 3095 |
ISO 29601 | Paints and varnishes: Corrosion protection by protective paint systems - Assessment of porosity in a dry film | Pinhole & Porosity | 266 |
ISO 29601 | Paints and varnishes: Corrosion protection by protective paint systems - Assessment of porosity in a dry film | Pinhole & Porosity | 236 |
ISO 29601 | Paints and varnishes: Corrosion protection by protective paint systems - Assessment of porosity in a dry film | Pinhole & Porosity | 280 |
ISO 3537 | Road vehicles: Safety glazing materials - Mechanical tests | Washability & Abrasion | 5135, 5155 |
ISO 4287 | Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters | Surface Preparation | 7061, 7062 |
ISO 4287/1 | Surface roughness: Terminology - Surface and its parameters | Surface Preparation | 7061, 7062 |
ISO 4586-2 | High-pressure decorative laminates: Sheets made from thermosetting resins - Determination of properties | Hardness & Scratch | 3092 |
ISO 4586-2 | High-pressure decorative laminates: Sheets made from thermosetting resins - Determination of properties | Hardness & Scratch | 3025 |
ISO 4586-2 | High-pressure decorative laminates: Sheets made from thermosetting resins - Determination of properties | Washability & Abrasion | 5135, 5155 |
ISO 4624 | High-pressure decorative laminates (HPL, HPDL): Sheets based on thermosetting resins (Usually called Laminates) - Determination of properties | Adhesion Testers | 106 |
ISO 4624 | High-pressure decorative laminates (HPL, HPDL): Sheets based on thermosetting resins (Usually called Laminates) - Determination of properties | Adhesion Testers | 506 |
ISO 4624 | High-pressure decorative laminates (HPL, HPDL): Sheets based on thermosetting resins (Usually called Laminates) - Determination of properties | Adhesion Testers | 510 |
ISO 5470-1 | Rubber- or plastics-coated fabrics: Determination of abrasion resistance - Taber abrader | Washability & Abrasion | 5135, 5155 |
ISO 6272:1993 | Paints and varnishes - Falling-weight test | Elasticity & Deformation | 1615 |
ISO 6272-1 | Paints and varnishes: Rapid-deformation (impact resistance) tests - Falling-weight test, large-area indenter | Elasticity & Deformation | 1615 |
ISO 6272-2 | Paints and varnishes: Rapid-deformation (impact resistance) tests - Falling-weight test, small-area indenter | Elasticity & Deformation | 1615 |
ISO 6860 | Paints and varnishes - Bend test (conical mandrel) | Elasticity & Deformation | 1510 |
ISO 7253 | Paints and varnishes - Determination of resistance to neutral salt spray (fog) | Hardness & Scratch | 1537 |
ISO 7267-2 | Rubber-covered rollers: Determination of apparent hardness (Shore-type durometer method) | Hardness & Scratch | 3120 |
ISO 7668 | Anodizing of aluminium and its alloys: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees | Appearance Measurement | 480, 408 |
ISO 7724-2 | Paints and varnishes: Colorimetry - Colour measurement | Appearance Measurement | 6085 |
ISO 7724-3 | Paints and varnishes: Colorimetry - Calculation of colour differences | Appearance Measurement | 6085 |
ISO 7783-1 | Paints and varnishes:Determination of water-vapour transmission properties (Cup method) | Drying Time & Permeability | 5100 |
ISO 7783-2 | Paints and varnishes: Coating materials and coating systems for exterior masonry and concrete - Determination and classification of water-vapour transmission rate (permeability) | Drying Time & Permeability | 5100 |
ISO 7784-1 | Paints and varnishes: Determination of resistance to abrasion - Method with abrasive-paper covered wheels and rotating test specimen | Washability & Abrasion | 5135, 5155 |
ISO 7784-2 | Paints and varnishes: Determination of resistance to abrasion - Rotating abrasive rubber wheel method | Washability & Abrasion | 5135, 5155 |
ISO 8045 | Paints and varnishes: Determination of resistance to abrasion - Rotating abrasive rubber wheel method | Concrete & Metal Detection | 181, 182 |
ISO 8289-A | Vitreous and porcelain enamels: Low voltage test for detecting and locating defects | Pinhole & Porosity | 270 |
ISO 8501-1 | Preparation of steel substrates before application of paints and related products: Visual assessment of surface cleanliness - Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings | Surface Preparation | 128 |
ISO 8502-11 | Preparation of steel substrates before application of paints and related products: Tests for the assessment of surface cleanliness - Field method for the turbidimetric determination of water-soluble sulfate | Surface Preparation | 134 CSN |
ISO 8502-3 | Preparation of steel substrates before application of paints and related products: Tests for the assessment of surface cleanliness - Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) | Surface Preparation | 142 |
ISO 8502-4 | Preparation of steel substrates before application of paints and related products: Tests for the assessment of surface cleanliness - Guidance on the estimation of the probability of condensation prior to paint application | Climatic Conditions | 319 |
ISO 8502-4 | Preparation of steel substrates before application of paints and related products: Tests for the assessment of surface cleanliness - Guidance on the estimation of the probability of condensation prior to paint application | Climatic Conditions | 320 |
ISO 8502-4 | Preparation of steel substrates before application of paints and related products: Tests for the assessment of surface cleanliness - Guidance on the estimation of the probability of condensation prior to paint application | Climatic Conditions | 309 |
ISO 8502-5 | Preparation of steel substrates before application of paints and related products:Tests for the assessment of surface cleanliness - Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) | Surface Preparation | 134S |
ISO 8502-5 | Preparation of steel substrates before application of paints and related products:Tests for the assessment of surface cleanliness - Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) | Surface Preparation | 134 CSN |
ISO 8502-6 | Preparation of steel substrates before application of paints and related products: Tests for the assessment of surface cleanliness - Extraction of soluble contaminants for analysis (The Bresle method) | Surface Preparation | 138 |
ISO 8502-6 | Preparation of steel substrates before application of paints and related products: Tests for the assessment of surface cleanliness - Extraction of soluble contaminants for analysis (The Bresle method) | Surface Preparation | 135A, 135B, 135C |
ISO 8502-9 | Preparation of steel substrates before application of paints and related products: Tests for the assessment of surface cleanliness - Field method for the conductometric determination of water-soluble salts | Surface Preparation | 138 |
ISO 8503-1 | Preparation of steel substrates before application of paints and related products: Surface roughness characteristics of blast-cleaned steel substrates - Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces | Surface Preparation | 125 |
ISO 8503-2 | Preparation of steel substrates before application of paints and related products: Surface roughness characteristics of blast-cleaned steel substrates - Method for the grading of surface profile of abrasive blast-cleaned steel (Comparator procedure) | Surface Preparation | 125 |
ISO 8503-5 | Preparation of steel substrates before application of paints and related products: Surface roughness characteristics of blast-cleaned steel substrates - Replica tape method for the determination of the surface profile | Surface Preparation | 122, 124 |
ISO 868 | Plastics and ebonite: Determination of indentation hardness by means of a durometer (Shore hardness) | Hardness & Scratch | 3120 |
ISO 9227 | Corrosion tests in artificial atmospheres - Salt spray tests | Hardness & Scratch | 1537 |
ISO 9352 | Plastics: Determination of resistance to wear by abrasive wheels | Washability & Abrasion | 5135, 5155 |
Standard | Standard Title | Reference | Elcometer Model |
JIS A 1453 | Methods of abrasion test for building materials and part of building construction (Abrasive-paper method) | Washability & Abrasion | 5135, 5155 |
JIS B 0601 | Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters | Surface Preparation | 7061, 7062 |
JIS G 3491 | Asphalt Protective Coatings for Steel Waer Pipe | Pinhole & Porosity | 280 |
JIS G 3492 | Coal-tar enamel protective coatings for steel water pipe | Pinhole & Porosity | 280 |
JIS H 8503 | Methods of Wear Resistance Test for Metallic Coatings | Washability & Abrasion | 5135, 5155 |
JIS K 5600-1-7 | Testing methods for paints: General rule - Determination of film thickness | Wet Film & Powder Thickness | 112, 115, 3236, 3238 |
JIS K 5600-1-7 | Testing methods for paints: General rule - Determination of film thickness | Wet Film & Powder Thickness | 3230 |
JIS K 5600-1-7 | Testing methods for paints: General rule - Determination of film thickness | Wet Film & Powder Thickness | 154 |
JIS K 5600-1-7 | Testing methods for paints: General rule - Determination of film thickness | Dry Film Thickness | 311 |
JIS K 5600-1-7 | Testing methods for paints: General rule - Determination of film thickness | Dry Film Thickness | 355, 456 |
JIS K 5600-1-7 | Testing methods for paints: General rule - Determination of film thickness | Dry Film Thickness | 211 |
JIS K 5600-1-7 | Testing methods for paints: General rule - Determination of film thickness | Dry Film Thickness | 415 |
JIS K 5600-1-7 | Testing methods for paints: General rule - Determination of film thickness | Dry Film Thickness | 101 |
JIS K 5600-1-7 | Testing methods for paints: General rule - Determination of film thickness | Dry Film Thickness | 121/4 |
JIS K 5600-1-7 | Testing methods for paints: General rule - Determination of film thickness | Dry Film Thickness | 141 |
JIS K 5600-2-4 | Testing methods for paints: Characteristics and stability of paints -Density (Pyknometer method) | Density | 1800 |
JIS K 5600-2-5 | Testing methods for paints: Characteristics and stability of paints - Finess of grind | Fineness of Grind | 2020, 2041, 2050 |
JIS K 5600-4-5 | Testing methods for paints: Mechanical property of film - Scratch hardness (Pencil method) | Appearance Measurement | 6085 |
JIS K 5600-4-6 | Testing methods for paints: Visual characteristics of film - Colorimetry (Calculation of colour differences) | Appearance Measurement | 6085 |
JIS K 5600-4-7 | Testing Methods for Paints: Visual Characteristics of Film - Specular Gloss | Appearance Measurement | 480 |
JIS K 5600-5-1 | Testing Methods for Pants: Mechanical Property of Film - Bend Test (Cylindrical Mandrel) | Elasticity & Deformation | 1500, 1506 |
JIS K 5600-5-2 | Testing Methods for Paints: Mechanical Properties of Film - Cupping Test | Elasticity & Deformation | 1620 |
JIS K 5600-5-3:1999 | Testing methods for paints: Mechanical property of film - Falling-weight test | Elasticity & Deformation | 1615 |
JIS K 5600-5-4 | Testing methods for paints: Mechanical property of film - Falling-weight test | Hardness & Scratch | 501, 3080, 3086 |
JIS K 5600-5-5 | Testing methods for paints: Mechanical property of film - Falling-weight test | Hardness & Scratch | 3000 Motorised 3000 Manual |
JIS K 5600-5-6 | Testing Methods for Paints: Mechanical Property of Film - Adhesion Test (Cross-cut test) | Adhesion Testers | 107, 1542 |
JIS K 5600-5-7 | Testing Methods for Paints: Mechanical Property of Film - Adhesion Test (Pull-off methods) | Adhesion Testers | 106 |
JIS K 5600-5-7 | Testing Methods for Paints: Mechanical Property of Film - Adhesion Test (Pull-off methods) | Adhesion Testers | 510 |
JIS K 5600-5-8 | Testing methods for paints: Mechanical property of film - Abrasion resistance (Rotating abrasive-paper-covered wheel method) | Washability & Abrasion | 5155 |
JIS K 5600-5-9 | Testing methods for paints: Mechanical property of film - Abrasion resistance (Rotating abrasive rubber wheel method) | Washability & Abrasion | 5155 |
JIS K 5600-5-11 | Testing methods for paints: Mechanical property of film - Washability | Washability & Abrasion | 1720 |
JIS K 6404-22 | Testing Methods For Rubber-or Plastics-coated Fabrics: Determination Of Abrasion Resistance | Washability & Abrasion | 5155 |
JIS K 6766 | Pinhole Test Method of Lined Films for Corrosion Prevention | Pinhole & Porosity | 270 |
JIS K 6766 | Pinhole Test Method of Lined Films for Corrosion Prevention | Pinhole & Porosity | 266 |
JIS K 6766 | Pinhole Test Method of Lined Films for Corrosion Prevention | Pinhole & Porosity | 236 |
JIS K 6902 | Testing Method for Laminated Thermosetting High-Pressure Decorative Sheets | Washability & Abrasion | 5155 |
JIS K 7205 | Testing Method for Abrasion Resistence of Plastics by Abrasive | Washability & Abrasion | 5155 |
JIS L 0849 | Test Methods for Colour Fastness to Rubbing | Washability & Abrasion | 5750 |
JIS Z 8741 | Specular glossiness - Methods of measurement | Appearance Measurement | 480, 408 |
Standard | Standard Title | Reference | Elcometer Model |
MIL-C-3004 | Coating, Fire-Resistant, Adhesive (for repairing surface of fibrous glass insulation board) | Washability & Abrasion | 1720 |
MIL-C-46057 | Coating, Polyurethane | Washability & Abrasion | 1720 |
MIL-E-11237 | Enamel, Synthetic, Lustreless | Washability & Abrasion | 1720 |
MIL-STD-1334B | Military Standard, Process for Barrier Coating of Anti-Friction Bearing | Washability & Abrasion | 1720 |
MIL-P-15422C | Military Specification; Polish, Metal (Liquid) | Washability & Abrasion | 1720 |
Standard | Standard Title | Reference | Elcometer Model |
NACE RP0188 | Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates | Pinhole & Porosity | 270 |
NACE RP0188 | Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates | Pinhole & Porosity | 266 |
NACE RP0188 | Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates | Pinhole & Porosity | 236 |
NACE RP0190 | External Protective Coatings for Joints, Fittings, and Valves on Metallic Underground or Submerged Pipelines and Piping Systems | Pinhole & Porosity | 266 |
NACE RP0274 | High-Voltage Electrical Inspection of Pipeline Coatings | Pinhole & Porosity | 266 |
NACE RP0274 | High-Voltage Electrical Inspection of Pipeline Coatings | Pinhole & Porosity | 236 |
NACE RP0274 | High-Voltage Electrical Inspection of Pipeline Coatings | Pinhole & Porosity | 280 |
NACE RP0287 | Field Measurement of Surface Profile of AbrasiveBlast-Cleaned Steel Surfaces Using a Replica Tape | Surface Preparation | 122, 124 |
NACE RP0490 | Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coating of 250 to 760 μm (10 to 30 mil) | Pinhole & Porosity | 266 |
NACE RP0490 | Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coating of 250 to 760 μm (10 to 30 mil) | Pinhole & Porosity | 236 |
NACE SP0188 | Standard Practice Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates | Pinhole & Porosity | 270 |
NACE SP0188 | Standard Practice Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates | Pinhole & Porosity | 266 |
NACE SP0188 | Standard Practice Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates | Pinhole & Porosity | 236 |
NACE SP0188 | Standard Practice Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates | Pinhole & Porosity | 280 |
NACE SP0490 | Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coating of 250 to 760 μm (10 to 30 mil) | Pinhole & Porosity | 266 |
NACE SP0490 | Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coating of 250 to 760 μm (10 to 30 mil) | Pinhole & Porosity | 236 |
NACE SP0490 | Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coating of 250 to 760 μm (10 to 30 mil) | Pinhole & Porosity | 280 |
NACE TM0186 | Methods of Validating Equivalence to ISO 8502-9 on Measurement of the Levels of Soluble Salts | Pinhole & Porosity | 280 |
NACE TM0384 | Holiday Detection of Internal Tubular Coatings of less than 250 micrometers (10 Mils) Dry-Film Thickness | Pinhole & Porosity | 270 |
NACE TM0384 | Holiday Detection of Internal Tubular Coatings of less than 250 micrometers (10 Mils) Dry-Film Thickness | Pinhole & Porosity | 280 |
Standard | Standard Title | Reference | Elcometer Model |
NBN T22-104 | Automatic Cupping Tester | Elasticity & Deformation | 1620 |
NBN T22-110 | Stainless Steel Density Cup | Density | 1800 |
Standard | Standard Title | Reference | Elcometer Model |
NEMA LD 3 | Laminate Testing | Washability & Abrasion | 5135, 5155 |
Standard | Standard Title | Reference | Elcometer Model |
NF A49-211 | Steel Tube Plain end Seamless Hot Rolled Tubes with Special Delivery Conditions | Dry Film Thickness | 355 |
NF A91-124 | Metallic coatings - Galvanization by immersion in molten zinc (hot-dip galvanizing) - Adhesion test methods | Hardness & Scratch | 1537 |
NF P18-417 | Non-Destructive Concrete Testing in Structures/Digital Concrete Test Hammer | Concrete & Metal Detection | 181, 182 |
NF P38-501 | Barcol Hardness Tester/ Thickness Measurement (with gel-coat) | Hardness & Scratch | 3101 |
NF Q03-055 | Paper and Board Tests - Determination of Abrasion Resistance of Paper and Board (By the Taber Method) | Washability & Abrasion | 5135, 5155 |
NF T30-014 | Viscosity of Flow Cup (paints, lacquers, inks and other viscous products) | Viscosity Cups | 2352, 2436 |
NF T30-017:1989 | Material Impact Testing | Elasticity & Deformation | 1615 |
NF T30-019 | Paints and varnishes - Cupping test | Elasticity & Deformation | 1620 |
NF T30-020 | Paints and varnishes - Determination of density | Density | 1800 |
NF T30-038 | Paints and varnishes - Cross-cut test | Adhesion Testers | 107, 1542 |
NF T30-038 | Paints and varnishes - Cross-cut test | Dry Film Thickness | 121/4 Adhesion |
NF T30-040 | Paints and varnishes - Bend test (cylindrical mandrel) | Elasticity & Deformation | 1500 |
NF T30-046 | Paints, varnishes and printing inks - Determination of fineness of grind | Fineness of Grind | 2020, 2041, 2050 |
NF T30-052 | Paints and varnishes - Buchholz indentation test | Hardness & Scratch | 3095 |
NF T30-062 | Paints and varnishes - Pull-off test for adhesion | Adhesion Testers | 106 |
NF T30-062 | Paints and varnishes - Pull-off test for adhesion | Adhesion Testers | 506 |
NF T30-062 | Paints and varnishes - Pull-off test for adhesion | Adhesion Testers | 510 |
NF T30-123 | Paints: Determination of Dry Film Thickness - Microscope Methods | Dry Film Thickness | 141 |
NF T30-123 | Paints: Determination of Dry Film Thickness - Microscope Methods | Dry Film Thickness | 121/4 |
NF T30-124 | Paints and Varnishes: Measurement of Dry Film Thickness - Non-Destructive Method with a Magnetic Flux. | Dry Film Thickness | 211 |
NF T30-124 | Paints and Varnishes: Measurement of Dry Film Thickness - Non-Destructive Method with a Magnetic Flux. | Dry Film Thickness | 415 |
NF T30-124 | Paints and Varnishes: Measurement of Dry Film Thickness - Non-Destructive Method with a Magnetic Flux. | Dry Film Thickness | 355, 456 |
NF T30-125 | Paints: Determination of wet film thickness | Wet Film & Powder Thickness | 112, 115, 3236, 3238 |
NF T30-125 | Paints: Determination of wet film thickness | Wet Film & Powder Thickness | 154 |
NF T30-125 | Paints: Determination of wet film thickness | Wet Film & Powder Thickness | 3233 |
NF T30-125 | Paints: Determination of wet film thickness | Wet Film & Powder Thickness | 3230 |
NF T30-606 | Fillers for interior use: Measurement of adhesion-cohesion by a pull-off test | Adhesion Testers | 108, 508 |
NF T30-606 | Fillers for interior use: Measurement of adhesion-cohesion by a pull-off test | Adhesion Testers | 106 |
NF T30-606 | Fillers for interior use: Measurement of adhesion-cohesion by a pull-off test | Adhesion Testers | 506 |
NF T30-606 | Fillers for interior use: Measurement of adhesion-cohesion by a pull-off test | Adhesion Testers | 510 |
NF T36-006 | Fillers for interior use: Measurement of adhesion-cohesion by a pull-off test | Appearance Measurement | 6085 |
NF T51-123 | Plastics: Verification of Shore hardness durometers. | Hardness & Scratch | 3120 |
NF T51-174 | Plastics and Ebonite - Determination of indentation hardness by means of a durometer shore hardness | Hardness & Scratch | 3120 |
NF X08-012-1 | Colours - Colorimetry - Colorimetric characteristics of coloured samples - Definitions and basic assessment principles | Appearance Measurement | 6085 |
NF X08-012-2 | Colour - Colorimetry - Colorimetric Characteristics of coloured samples - practical considerations concerning instrumentation and reflection measurment | Appearance Measurement | 6085 |
Standard | Standard Title | Reference | Elcometer Model |
PSA D45 1010 | Polymer Material and Parts inside and outside passenger compartment - Colour fastness to rubbing | Washability & Abrasion | 1720, 1720 Tool 8 |
Standard | Standard Title | Reference | Elcometer Model |
SAE J 1530 | Test Method for Determining Resistance to Fiber Loss, Resistance to Abrasion and Bearding of Automotive Carpet Materials | Washability & Abrasion | 5135, 5155 |
SAE J 1847 | Abrasion Resistance Testing - Vehicle Exterior Graphics and Pin Striping | Washability & Abrasion | 5135, 5155 |
SAE J 365 | Method of Testing Resistance to Scuffing of Trim Materials | Washability & Abrasion | 5135, 5155 |
SAE J 948 | Test Method for Determining Resistance to Abrasion of Automotive Bodycloth, Vinyl, and Leather, and the Snagging of Automotive Bodycloth | Washability & Abrasion | 5135, 5155 |
Standard | Standard Title | Reference | Elcometer Model |
SANS 5772 | Preparation of steel substrates before the application of paints and related products - Surface roughness characteristics of blast-cleaned steel surfaces - Profile of blast-cleaned surfaces determined by a micrometer profile gauge | Surface Preparation | 123, 224 |
Standard | Standard Title | Reference | Elcometer Model |
SIA 262 | Non-Destructive Site Air - Permeability Test | Concrete & Metal Detection | 331 |
Standard | Standard Title | Reference | Elcometer Model |
SIS 923509 | Falling Sand Method: Abrasion Resistence test on floor floor varnishes and floor lacquers | Washability & Abrasion | 5135, 5155 |
Standard | Standard Title | Reference | Elcometer Model |
SS 184159 | Protective Coating Inspection Kit | Dry Film Thickness | 355, 456 |
SS 55900 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness | Surface Preparation | 128 |
SS 923509 | Floorings - Determination of abrasion resistance | Washability & Abrasion | 5135, 5155 |
SS-EN 206 | Concrete - Specification, performance, production and conformity | Concrete & Metal Detection | 331 |
Standard | Standard Title | Reference | Elcometer Model |
SSPC Guide 15 | Field Methods for extraction and analysis of soluble salts on steel and other nonporous substrates | Surface Preparation | 130, 130SSP |
SSPC Guide 15 | Field Methods for extraction and analysis of soluble salts on steel and other nonporous substrates | Surface Preparation | 134S |
SSPC Guide 15 | Field Methods for extraction and analysis of soluble salts on steel and other nonporous substrates | Surface Preparation | 138 |
SSPC Guide 15 | Field Methods for extraction and analysis of soluble salts on steel and other nonporous substrates | Surface Preparation | 134 CSN |
SSPC Guide 15 | Field Methods for extraction and analysis of soluble salts on steel and other nonporous substrates | Surface Preparation | 138/2 |
SSPC PA17 | Procedure for determining conformance to Steel Profile/Surface Roughness/Peak Count Requirements | Surface Preparation | 123, 224 |
SSPC PA17 | Procedure for determining conformance to Steel Profile/Surface Roughness/Peak Count Requirements | Surface Preparation | 125, 127 |
SSPC PA17 | Procedure for determining conformance to Steel Profile/Surface Roughness/Peak Count Requirements | Surface Preparation | 122 |
SSPC PA17 | Procedure for determining conformance to Steel Profile/Surface Roughness/Peak Count Requirements | Surface Preparation | 7061, 7062 |
SSPC PA2 | Measurement of Dry Coating Thickness with magnetic Gages | Dry Film Thickness | 101 |
SSPC PA2 | Measurement of Dry Coating Thickness with magnetic Gages | Dry Film Thickness | 211 |
SSPC PA2 | Measurement of Dry Coating Thickness with magnetic Gages | Dry Film Thickness | 355, 456, 456IPC |
SSPC PA9 | Measurement of Dry Coating Thickness on Cementitious Substrates Using Ultrasonic Gauges | Dry Film Thickness | 500 |
SSPC VIS 1 | Pictorial Surface Preparation Standards For Painting Steel Surfaces | Surface Preparation | 128 |
SSPC VIS 2 | Standard Method of Evaluating Degree of Rusting on Painted Steel Surfaces | Surface Preparation | 128 |
SSPC VIS 3 | Guide and Reference Photographs for Steel Surfaces Prepared By Power and Hand Tool Cleaning | Surface Preparation | 128 |
SSPC VIS 4 | Guide and Reference Photographs for Steel Surfaces Prepared by Waterjetting | Surface Preparation | 128 |
SSPC VIS 5 | Guide and Reference Photographs for Steel Surfaces Prepared by Wet Abrasive Blast Cleaning | Surface Preparation | 128 |
Standard | Standard Title | Reference | Elcometer Model |
TAPPI T 476 | Abrasion loss of paper and paperboard | Washability & Abrasion | 5135, 5155 |
TAPPI T 653 | Speular Gloss of Paper and Paperboard at 20 Degrees | Appearance Measurement | 480 |
Standard | Standard Title | Reference | Elcometer Model |
UNE 135203-1 | Road Marking Equipement - Materials. Laboratory Abrasion Tests - Abrasion Resistence. Taber Method. | Washability & Abrasion | 5135, 5155 |
UNE 48250 | Paints and Varnishes - Abrasion Resistence; Taber Method. | Washability & Abrasion | 5135, 5155 |
UNE 56842 | Kitchen furniture - Tests for surfacing materials. | Washability & Abrasion | 5135, 5155 |
UNE 56843 | Kitchen furniture - Physical tests | Washability & Abrasion | 5135, 5155 |
UNE 56868 | Bathroom furniture - Physical test methods. | Washability & Abrasion | 5135, 5155 |
UNE 57095 | Paper and board - Determination of abrasion resistance (Taber method) | Washability & Abrasion | 5135, 5155 |
Standard | Standard Title | Reference | Elcometer Model |
UNI 10174 | Instruction For The Inspection Of Reinforced Concrete Structure Exposed Atmosphere By Half Potential Mapping | Concrete & Metal Detection | 331 |
UNI 9189 | High Performance Ultrasonic Tester | Concrete & Metal Detection | 181, 182 |
Standard | Standard Title | Reference | Elcometer Model |
US Navy NSI 009-32 | Cleaning and Painting Requirements; accomplish | Climatic Conditions | 319 |
US Navy NSI 009-32 | Cleaning and Painting Requirements; accomplish | Climatic Conditions | 320 |
US Navy NSI 009-32 | Cleaning and Painting Requirements; accomplish | Dry Film Thickness | 355, 456, 456IPC |
US Navy NSI 009-32 | Cleaning and Painting Requirements; accomplish | Surface Preparation | 138, 130SSP |
US Navy NSI 009-32 | Cleaning and Painting Requirements; accomplish | Surface Preparation | 128 |
US Navy NSI 009-32 | Cleaning and Painting Requirements; accomplish | Surface Preparation | 122, 124 |
US Navy NSI 009-32 | Cleaning and Painting Requirements; accomplish | Surface Preparation | 123, 224 |
US Navy NSI 009-32 | Cleaning and Painting Requirements; accomplish | Wet Film & Powder Thickness | 112, 115, 3236, 3238 |
US Navy PPI 63101-000 | Cleaning, Surface Preparation and Painting Requirements for (area to be prepared) | Climatic Conditions | 319 |
US Navy PPI 63101-000 | Cleaning, Surface Preparation and Painting Requirements for (area to be prepared) | Climatic Conditions | 320 |
US Navy PPI 63101-000 | Cleaning, Surface Preparation and Painting Requirements for (area to be prepared) | Dry Film Thickness | 355, 456 |
US Navy PPI 63101-000 | Cleaning, Surface Preparation and Painting Requirements for (area to be prepared) | Surface Preparation | 142 |
US Navy PPI 63101-000 | Cleaning, Surface Preparation and Painting Requirements for (area to be prepared) | Surface Preparation | 138 |
US Navy PPI 63101-000 | Cleaning, Surface Preparation and Painting Requirements for (area to be prepared) | Surface Preparation | 128 |
US Navy PPI 63101-000 | Cleaning, Surface Preparation and Painting Requirements for (area to be prepared) | Surface Preparation | 122, 124 |
US Navy PPI 63101-000 | Cleaning, Surface Preparation and Painting Requirements for (area to be prepared) | Surface Preparation | 123, 224 |
US Navy PPI 63101-000 | Cleaning, Surface Preparation and Painting Requirements for (area to be prepared) | Wet Film & Powder Thickness | 112, 115, 3236, 3238 |