Shear Wave Standard Transducers
Large single element transducers designed for use with angle beam wedges for a powerful flaw detection solution.
- Summary
-
Summary
-
Shear Wave Standard Transducers can be fixed to wedges of different angles to produce shear wave velocity measurements.
When used in conjunction with the ‘Trigonometry’ feature of the gauge, the transducer will produce instrumental flaw detection sound shear waves.
-
- Key Features
-
Key Features
Shear Wave Standard Transducers
Shear Wave Standard Transducer Characteristics Explained
High Damped
Limiting the duration or decreasing the amplitude of vibrations. For use with EE (ThruPaint™) only.
High Resolution
Features increased near surface resolution, ideal for use on thin substrates.
-
- Technical Information
-
Technical InformationShear Wave Standard Transducers
Part Number Probe Diameter Probe Characteristic Connector Type Suitable for measuring Damping
Microdot
BNC
Cast Iron
Steel
Common Metals
Rough Surfaces
Castings
Billets
Weld Inspection
1.00 MHz Shear Wave Standard Transducers TF1M00EE-1 1/2 x 1/2" Composite S TF1M00EH-3 1/2 x 1" Composite S TF1M00FF-1 5/8 x 5/8" Composite S TF1M00GF-1 5/8 x 3/4" Composite S TF1M00GG-1 3/4 x 3/4" Composite S TF1M00EE-2 1/2 x 1/2" Composite S TF1M00EH-4 1/2 x 1" Composite S TF1M00FF-2 5/8 x 5/8" Composite S TF1M00GF-2 5/8 x 3/4" Composite S TF1M00GG-2 3/4 x 3/4" Composite S 2.25 MHz Shear Wave Standard Transducers TF2M25EEG-1 1/2 x 1/2" Standard HG TF2M25EHG-1 1/2 x 1" Standard HG TF2M25FFG-1 5/8 x 5/8" Standard HG TF2M25GFG-1 5/8 x 3/4" Standard HG TF2M25GGG-1 3/4 x 3/4" Standard HG TF2M25EEG-2 1/2 x 1/2" Standard HG TF2M25EHG-2 1/2 x 1" Standard HG TF2M25FFG-2 5/8 x 5/8" Standard HG TF2M25GFG-2 5/8 x 3/4" Standard HG TF2M25GGG-2 3/4 x 3/4" Standard HG TF2M25EER-1 1/2 x 1/2" Standard R TF2M25EHR-1 1/2 x 1" Standard R TF2M25FFR-1 5/8 x 5/8" Standard R TF2M25GFR-1 5/8 x 3/4" Standard R TF2M25GGR-1 3/4 x 3/4" Standard R TF2M25EER-2 1/2 x 1/2" Standard R TF2M25EHR-2 1/2 x 1" Standard R TF2M25FFR-2 5/8 x 5/8" Standard R TF2M25GFR-2 5/8 x 3/4" Standard R TF2M25GGR-2 3/4 x 3/4" Standard R 5.00 MHz Shear Wave Standard Transducers TF5M00EEG-1 1/2 x 1" Standard HG TF5M00EHG-1 1/2 x 1" Standard HG TF5M00FFG-1 5/8 x 5/8" Standard HG TF5M00GFG-1 3/4 x 5/8" Standard HG TF5M00GGG-1 3/4 x 3/4" Standard HG TF5M00EEG-2 1/2 x 1/2" Standard HG TF5M00EHG-2 1/2 x 1" Standard HG TF5M00FFG-2 5/8 x 5/8" Standard HG TF5M00GFG-2 3/4 x 5/8" Standard HG TF5M00GGG-2 3/4 x 3/4" Standard HG TF5M00EER-1 1/2 x 1/2" Standard R TF5M00EHR-1 1/2 x 1" Standard R TF5M00FFR-1 5/8 x 5/8" Standard R TF5M00GFR-1 3/4 x 5/8" Standard R TF5M00GGR-1 3/4 x 3/4" Standard R TF5M00EER-2 1/2 x 1/2" Standard R TF5M00EHR-2 1/2 x 1" Standard R TF5M00FFR-2 5/8 x 5/8" Standard R TF5M00GFR-2 3/4 x 5/8" Standard R TF5M00GGR-2 3/4 x 3/4" Standard R 1.00 MHz Shear Wave Standard Transducers Part Number TF1M00EE-1 Probe Diameter 1/2 x 1/2" Probe Characteristic Composite Damping S Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF1M00EH-3 Probe Diameter 1/2 x 1" Probe Characteristic Composite Damping S Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF1M00FF-1 Probe Diameter 5/8 x 5/8" Probe Characteristic Composite Damping S Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF1M00GF-1 Probe Diameter 5/8 x 3/4" Probe Characteristic Composite Damping S Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF1M00GG-1 Probe Diameter 3/4 x 3/4" Probe Characteristic Composite Damping S Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF1M00EE-2 Probe Diameter 1/2 x 1/2" Probe Characteristic Composite Damping S Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF1M00EH-4 Probe Diameter 1/2 x 1" Probe Characteristic Composite Damping S Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF1M00FF-2 Probe Diameter 5/8 x 5/8" Probe Characteristic Composite Damping S Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF1M00GF-2 Probe Diameter 5/8 x 3/4" Probe Characteristic Composite Damping S Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF1M00GG-2 Probe Diameter 3/4 x 3/4" Probe Characteristic Composite Damping S Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection 2.25 MHz Shear Wave Standard Transducers Part Number TF2M25EEG-1 Probe Diameter 1/2 x 1/2" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25EHG-1 Probe Diameter 1/2 x 1" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25FFG-1 Probe Diameter 5/8 x 5/8" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25GFG-1 Probe Diameter 5/8 x 3/4" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25GGG-1 Probe Diameter 3/4 x 3/4" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25EEG-2 Probe Diameter 1/2 x 1/2" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25EHG-2 Probe Diameter 1/2 x 1" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25FFG-2 Probe Diameter 5/8 x 5/8" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25GFG-2 Probe Diameter 5/8 x 3/4" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25GGG-2 Probe Diameter 3/4 x 3/4" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25EER-1 Probe Diameter 1/2 x 1/2" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25EHR-1 Probe Diameter 1/2 x 1" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25FFR-1 Probe Diameter 5/8 x 5/8" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25GFR-1 Probe Diameter 5/8 x 3/4" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25GGR-1 Probe Diameter 3/4 x 3/4" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25EER-2 Probe Diameter 1/2 x 1/2" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25EHR-2 Probe Diameter 1/2 x 1" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25FFR-2 Probe Diameter 5/8 x 5/8" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25GFR-2 Probe Diameter 5/8 x 3/4" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25GGR-2 Probe Diameter 3/4 x 3/4" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection 5.00 MHz Shear Wave Standard Transducers Part Number TF5M00EEG-1 Probe Diameter 1/2 x 1" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00EHG-1 Probe Diameter 1/2 x 1" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00FFG-1 Probe Diameter 5/8 x 5/8" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00GFG-1 Probe Diameter 3/4 x 5/8" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00GGG-1 Probe Diameter 3/4 x 3/4" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00EEG-2 Probe Diameter 1/2 x 1/2" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00EHG-2 Probe Diameter 1/2 x 1" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00FFG-2 Probe Diameter 5/8 x 5/8" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00GFG-2 Probe Diameter 3/4 x 5/8" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00GGG-2 Probe Diameter 3/4 x 3/4" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00EER-1 Probe Diameter 1/2 x 1/2" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00EHR-1 Probe Diameter 1/2 x 1" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00FFR-1 Probe Diameter 5/8 x 5/8" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00GFR-1 Probe Diameter 3/4 x 5/8" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00GGR-1 Probe Diameter 3/4 x 3/4" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00EER-2 Probe Diameter 1/2 x 1/2" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00EHR-2 Probe Diameter 1/2 x 1" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00FFR-2 Probe Diameter 5/8 x 5/8" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00GFR-2 Probe Diameter 3/4 x 5/8" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00GGR-2 Probe Diameter 3/4 x 3/4" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection S - Standard Undamped Transducer
HG - High Gain Damping Transducers
R - Resolution Transducer- Part Numbers
-
Part NumbersShear Wave Standard Transducers
-
1.00 MHz Shear Wave Standard Transducers- Probe Diameter: 1/2 x 1/2"
- Probe Characteristic: Composite
- Part Number : TF1M00EE-1
- Certification : No Certificate
-
1.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1"
- Probe Characteristic: Composite
- Part Number : TF1M00EH-3
- Certification : No Certificate
-
1.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 5/8"
- Probe Characteristic: Composite
- Part Number : TF1M00FF-1
- Certification : No Certificate
-
1.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 3/4"
- Probe Characteristic: Composite
- Part Number : TF1M00GF-1
- Certification : No Certificate
-
1.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 3/4"
- Probe Characteristic: Composite
- Part Number : TF1M00GG-1
- Certification : No Certificate
-
1.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1/2"
- Probe Characteristic: Composite
- Part Number : TF1M00EE-2
- Certification : No Certificate
-
1.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1"
- Probe Characteristic: Composite
- Part Number : TF1M00EH-4
- Certification : No Certificate
-
1.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 5/8"
- Probe Characteristic: Composite
- Part Number : TF1M00FF-2
- Certification : No Certificate
-
1.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 3/4"
- Probe Characteristic: Composite
- Part Number : TF1M00GF-2
- Certification : No Certificate
-
1.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 3/4"
- Probe Characteristic: Composite
- Part Number : TF1M00GG-2
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1/2"
- Probe Characteristic: Standard
- Part Number : TF2M25EEG-1
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1"
- Probe Characteristic: Standard
- Part Number : TF2M25EHG-1
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF2M25GFG-1
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF2M25GGG-1
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1/2"
- Probe Characteristic: Standard
- Part Number : TF2M25EEG-2
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1"
- Probe Characteristic: Standard
- Part Number : TF2M25EHG-2
- Uncertified No Certification
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF2M25FFG-2
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF2M25FFG-1
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF2M25GFG-2
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF2M25GGG-2
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1"
- Probe Characteristic: Standard
- Part Number : TF5M00EHG-2
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1/2"
- Probe Characteristic: Standard
- Part Number : TF2M25EER-1
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF2M25GFR-2
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF5M00GGG-2
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF2M25GGR-2
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1/2"
- Probe Characteristic: Standard
- Part Number : TF5M00EER-1
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF5M00FFG-2
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1"
- Probe Characteristic: Standard
- Part Number : TF2M25EHR-1
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF2M25FFR-1
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1"
- Probe Characteristic: Standard
- Part Number : TF5M00EEG-1
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1"
- Probe Characteristic: Standard
- Part Number : TF5M00EHR-1
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF5M00GFG-2
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF2M25GFR-1
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1"
- Probe Characteristic: Standard
- Part Number : TF5M00EHG-1
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF5M00FFR-1
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF5M00GFR-1
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF2M25GGR-1
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF5M00FFG-1
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF5M00GFG-1
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF5M00GGR-1
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1/2"
- Probe Characteristic: Standard
- Part Number : TF2M25EER-2
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1"
- Probe Characteristic: Standard
- Part Number : TF2M25EHR-2
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF5M00GGG-1
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1/2"
- Probe Characteristic: Standard
- Part Number : TF5M00EER-2
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF2M25FFR-2
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1/2"
- Probe Characteristic: Standard
- Part Number : TF5M00EEG-2
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1"
- Probe Characteristic: Standard
- Part Number : TF5M00EHR-2
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF5M00FFR-2
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF5M00GFR-2
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF5M00GGR-2
- Certification : No Certificate
- Accessories
-
AccessoriesShear Wave Standard Transducers
ElcoMaster®
It’s not all about taking readings, it’s what you do with them that counts - save up to 30% of your working week by producing professional reports in seconds with ElcoMaster® Software.
-
Part NumberTC-24034-1
-
Part NumberTC-24034-2
-
Part NumberTC-24034-3
-
Part NumberTC-24034-9
-
Part NumberTL-24030-1
-
Part NumberTL-24030-2
-
Part NumberTL-24030-3
-
Part NumberTL-24030-5
-
Part NumberTL-24030-6
-
Part NumberTL-24030-7
-
Part NumberTL-24031
-
Part NumberTL-24032
-
Part NumberTD-24033-1
-
Part NumberTD-24033-3
-
Part NumberTD-24033-4
-
Part NumberTD-24033-5
-
Part NumberTD-24033-6
-
Part NumberTD-24033-7
-
Part NumberTD-24033-8
-
Part NumberTZ-24035
Shear Wave Standard Transducers
Large single element transducers designed for use with angle beam wedges for a powerful flaw detection solution.
Summary
Shear Wave Standard Transducers
Shear Wave Standard Transducers can be fixed to wedges of different angles to produce shear wave velocity measurements.
When used in conjunction with the ‘Trigonometry’ feature of the gauge, the transducer will produce instrumental flaw detection sound shear waves.
Key Features
Shear Wave Standard Transducers
Shear Wave Standard Transducer Characteristics Explained
High Damped
Limiting the duration or decreasing the amplitude of vibrations. For use with EE (ThruPaint™) only.High Resolution
Features increased near surface resolution, ideal for use on thin substrates.Technical InformationShear Wave Standard TransducersPart Number Probe Diameter Probe Characteristic Connector Type Suitable for measuring Damping
Microdot
BNC
Cast Iron
Steel
Common Metals
Rough Surfaces
Castings
Billets
Weld Inspection
1.00 MHz Shear Wave Standard Transducers TF1M00EE-1 1/2 x 1/2" Composite S TF1M00EH-3 1/2 x 1" Composite S TF1M00FF-1 5/8 x 5/8" Composite S TF1M00GF-1 5/8 x 3/4" Composite S TF1M00GG-1 3/4 x 3/4" Composite S TF1M00EE-2 1/2 x 1/2" Composite S TF1M00EH-4 1/2 x 1" Composite S TF1M00FF-2 5/8 x 5/8" Composite S TF1M00GF-2 5/8 x 3/4" Composite S TF1M00GG-2 3/4 x 3/4" Composite S 2.25 MHz Shear Wave Standard Transducers TF2M25EEG-1 1/2 x 1/2" Standard HG TF2M25EHG-1 1/2 x 1" Standard HG TF2M25FFG-1 5/8 x 5/8" Standard HG TF2M25GFG-1 5/8 x 3/4" Standard HG TF2M25GGG-1 3/4 x 3/4" Standard HG TF2M25EEG-2 1/2 x 1/2" Standard HG TF2M25EHG-2 1/2 x 1" Standard HG TF2M25FFG-2 5/8 x 5/8" Standard HG TF2M25GFG-2 5/8 x 3/4" Standard HG TF2M25GGG-2 3/4 x 3/4" Standard HG TF2M25EER-1 1/2 x 1/2" Standard R TF2M25EHR-1 1/2 x 1" Standard R TF2M25FFR-1 5/8 x 5/8" Standard R TF2M25GFR-1 5/8 x 3/4" Standard R TF2M25GGR-1 3/4 x 3/4" Standard R TF2M25EER-2 1/2 x 1/2" Standard R TF2M25EHR-2 1/2 x 1" Standard R TF2M25FFR-2 5/8 x 5/8" Standard R TF2M25GFR-2 5/8 x 3/4" Standard R TF2M25GGR-2 3/4 x 3/4" Standard R 5.00 MHz Shear Wave Standard Transducers TF5M00EEG-1 1/2 x 1" Standard HG TF5M00EHG-1 1/2 x 1" Standard HG TF5M00FFG-1 5/8 x 5/8" Standard HG TF5M00GFG-1 3/4 x 5/8" Standard HG TF5M00GGG-1 3/4 x 3/4" Standard HG TF5M00EEG-2 1/2 x 1/2" Standard HG TF5M00EHG-2 1/2 x 1" Standard HG TF5M00FFG-2 5/8 x 5/8" Standard HG TF5M00GFG-2 3/4 x 5/8" Standard HG TF5M00GGG-2 3/4 x 3/4" Standard HG TF5M00EER-1 1/2 x 1/2" Standard R TF5M00EHR-1 1/2 x 1" Standard R TF5M00FFR-1 5/8 x 5/8" Standard R TF5M00GFR-1 3/4 x 5/8" Standard R TF5M00GGR-1 3/4 x 3/4" Standard R TF5M00EER-2 1/2 x 1/2" Standard R TF5M00EHR-2 1/2 x 1" Standard R TF5M00FFR-2 5/8 x 5/8" Standard R TF5M00GFR-2 3/4 x 5/8" Standard R TF5M00GGR-2 3/4 x 3/4" Standard R 1.00 MHz Shear Wave Standard Transducers Part Number TF1M00EE-1 Probe Diameter 1/2 x 1/2" Probe Characteristic Composite Damping S Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF1M00EH-3 Probe Diameter 1/2 x 1" Probe Characteristic Composite Damping S Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF1M00FF-1 Probe Diameter 5/8 x 5/8" Probe Characteristic Composite Damping S Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF1M00GF-1 Probe Diameter 5/8 x 3/4" Probe Characteristic Composite Damping S Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF1M00GG-1 Probe Diameter 3/4 x 3/4" Probe Characteristic Composite Damping S Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF1M00EE-2 Probe Diameter 1/2 x 1/2" Probe Characteristic Composite Damping S Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF1M00EH-4 Probe Diameter 1/2 x 1" Probe Characteristic Composite Damping S Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF1M00FF-2 Probe Diameter 5/8 x 5/8" Probe Characteristic Composite Damping S Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF1M00GF-2 Probe Diameter 5/8 x 3/4" Probe Characteristic Composite Damping S Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF1M00GG-2 Probe Diameter 3/4 x 3/4" Probe Characteristic Composite Damping S Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection 2.25 MHz Shear Wave Standard Transducers Part Number TF2M25EEG-1 Probe Diameter 1/2 x 1/2" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25EHG-1 Probe Diameter 1/2 x 1" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25FFG-1 Probe Diameter 5/8 x 5/8" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25GFG-1 Probe Diameter 5/8 x 3/4" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25GGG-1 Probe Diameter 3/4 x 3/4" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25EEG-2 Probe Diameter 1/2 x 1/2" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25EHG-2 Probe Diameter 1/2 x 1" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25FFG-2 Probe Diameter 5/8 x 5/8" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25GFG-2 Probe Diameter 5/8 x 3/4" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25GGG-2 Probe Diameter 3/4 x 3/4" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25EER-1 Probe Diameter 1/2 x 1/2" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25EHR-1 Probe Diameter 1/2 x 1" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25FFR-1 Probe Diameter 5/8 x 5/8" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25GFR-1 Probe Diameter 5/8 x 3/4" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25GGR-1 Probe Diameter 3/4 x 3/4" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25EER-2 Probe Diameter 1/2 x 1/2" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25EHR-2 Probe Diameter 1/2 x 1" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25FFR-2 Probe Diameter 5/8 x 5/8" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25GFR-2 Probe Diameter 5/8 x 3/4" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF2M25GGR-2 Probe Diameter 3/4 x 3/4" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection 5.00 MHz Shear Wave Standard Transducers Part Number TF5M00EEG-1 Probe Diameter 1/2 x 1" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00EHG-1 Probe Diameter 1/2 x 1" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00FFG-1 Probe Diameter 5/8 x 5/8" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00GFG-1 Probe Diameter 3/4 x 5/8" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00GGG-1 Probe Diameter 3/4 x 3/4" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00EEG-2 Probe Diameter 1/2 x 1/2" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00EHG-2 Probe Diameter 1/2 x 1" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00FFG-2 Probe Diameter 5/8 x 5/8" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00GFG-2 Probe Diameter 3/4 x 5/8" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00GGG-2 Probe Diameter 3/4 x 3/4" Probe Characteristic Standard Damping HG Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00EER-1 Probe Diameter 1/2 x 1/2" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00EHR-1 Probe Diameter 1/2 x 1" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00FFR-1 Probe Diameter 5/8 x 5/8" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00GFR-1 Probe Diameter 3/4 x 5/8" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00GGR-1 Probe Diameter 3/4 x 3/4" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00EER-2 Probe Diameter 1/2 x 1/2" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00EHR-2 Probe Diameter 1/2 x 1" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00FFR-2 Probe Diameter 5/8 x 5/8" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00GFR-2 Probe Diameter 3/4 x 5/8" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection Part Number TF5M00GGR-2 Probe Diameter 3/4 x 3/4" Probe Characteristic Standard Damping R Connector Type Microdot BNC Suitable for measuring Cast Iron Steel Common Metals Rough Surfaces Castings Billets Weld Inspection S - Standard Undamped Transducer
HG - High Gain Damping Transducers
R - Resolution TransducerPart NumbersShear Wave Standard Transducers-
1.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1/2"
- Probe Characteristic: Composite
- Part Number : TF1M00EE-1
- Certification : No Certificate
-
1.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1"
- Probe Characteristic: Composite
- Part Number : TF1M00EH-3
- Certification : No Certificate
-
1.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 5/8"
- Probe Characteristic: Composite
- Part Number : TF1M00FF-1
- Certification : No Certificate
-
1.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 3/4"
- Probe Characteristic: Composite
- Part Number : TF1M00GF-1
- Certification : No Certificate
-
1.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 3/4"
- Probe Characteristic: Composite
- Part Number : TF1M00GG-1
- Certification : No Certificate
-
1.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1/2"
- Probe Characteristic: Composite
- Part Number : TF1M00EE-2
- Certification : No Certificate
-
1.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1"
- Probe Characteristic: Composite
- Part Number : TF1M00EH-4
- Certification : No Certificate
-
1.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 5/8"
- Probe Characteristic: Composite
- Part Number : TF1M00FF-2
- Certification : No Certificate
-
1.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 3/4"
- Probe Characteristic: Composite
- Part Number : TF1M00GF-2
- Certification : No Certificate
-
1.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 3/4"
- Probe Characteristic: Composite
- Part Number : TF1M00GG-2
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1/2"
- Probe Characteristic: Standard
- Part Number : TF2M25EEG-1
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1"
- Probe Characteristic: Standard
- Part Number : TF2M25EHG-1
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF2M25GFG-1
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF2M25GGG-1
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1/2"
- Probe Characteristic: Standard
- Part Number : TF2M25EEG-2
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1"
- Probe Characteristic: Standard
- Part Number : TF2M25EHG-2
- Uncertified No Certification
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF2M25FFG-2
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF2M25FFG-1
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF2M25GFG-2
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF2M25GGG-2
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1"
- Probe Characteristic: Standard
- Part Number : TF5M00EHG-2
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1/2"
- Probe Characteristic: Standard
- Part Number : TF2M25EER-1
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF2M25GFR-2
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF5M00GGG-2
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF2M25GGR-2
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1/2"
- Probe Characteristic: Standard
- Part Number : TF5M00EER-1
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF5M00FFG-2
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1"
- Probe Characteristic: Standard
- Part Number : TF2M25EHR-1
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF2M25FFR-1
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1"
- Probe Characteristic: Standard
- Part Number : TF5M00EEG-1
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1"
- Probe Characteristic: Standard
- Part Number : TF5M00EHR-1
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF5M00GFG-2
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF2M25GFR-1
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1"
- Probe Characteristic: Standard
- Part Number : TF5M00EHG-1
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF5M00FFR-1
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF5M00GFR-1
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF2M25GGR-1
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF5M00FFG-1
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF5M00GFG-1
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF5M00GGR-1
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1/2"
- Probe Characteristic: Standard
- Part Number : TF2M25EER-2
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1"
- Probe Characteristic: Standard
- Part Number : TF2M25EHR-2
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF5M00GGG-1
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1/2"
- Probe Characteristic: Standard
- Part Number : TF5M00EER-2
- Certification : No Certificate
-
2.25 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF2M25FFR-2
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1/2"
- Probe Characteristic: Standard
- Part Number : TF5M00EEG-2
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 1/2 x 1"
- Probe Characteristic: Standard
- Part Number : TF5M00EHR-2
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 5/8 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF5M00FFR-2
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 5/8"
- Probe Characteristic: Standard
- Part Number : TF5M00GFR-2
- Certification : No Certificate
-
5.00 MHz Shear Wave Standard Transducers
- Probe Diameter: 3/4 x 3/4"
- Probe Characteristic: Standard
- Part Number : TF5M00GGR-2
- Certification : No Certificate
AccessoriesShear Wave Standard TransducersElcoMaster®
It’s not all about taking readings, it’s what you do with them that counts - save up to 30% of your working week by producing professional reports in seconds with ElcoMaster® Software.
-
Part Number: TC-24034-1
-
Part Number: TC-24034-2
-
Part Number: TC-24034-3
-
Part Number: TC-24034-9
-
Part Number: TL-24030-1
-
Part Number: TL-24030-2
-
Part Number: TL-24030-3
-
Part Number: TL-24030-5
-
Part Number: TL-24030-6
-
Part Number: TL-24030-7
-
Part Number: TL-24031
-
Part Number: TL-24032
-
Part Number: TD-24033-1
-
Part Number: TD-24033-3
-
Part Number: TD-24033-4
-
Part Number: TD-24033-5
-
Part Number: TD-24033-6
-
Part Number: TD-24033-7
-
Part Number: TD-24033-8
-
Part Number: TZ-24035
- Part Numbers
-