Dual Element Transducers
The Elcometer range of Dual Element Transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
- Summary
-
Summary
-
Dual element material thickness transducers are ideal for inspecting metal substrates but can also measure thicknesses of other materials, such as plastic, composites or fibreglass.
-
- Key Features
-
Key Features
Dual Element Transducers
A dual element transducer consists of two crystal elements housed in the same casing, separated by an acoustic barrier. One crystal transmits sound energy whilst the other crystal receives any reflected sound energy.
Frequency and Diameter Disks
Transducers can be selected by frequency and the size of crystal. Frequency of a transducer is determined by the type of material and expected thickness range. The choice of the crystal size is determined by the access, shape and surface finish of the object to be measured. Each ultrasonic transducer can be easily identified by the disk on the top.
Dual Element Transducer Characteristics Explained
Dual Element Transducers denoted as HD/CT (Highly Damped Transducer/ Damped Coating Thickness Transducer) are necessary when using the Echo-Echo ThruPaint™ (E-E) measurement mode. Additionally CT (Damped Coating Thickness Transducer) enables simultaneous coating thickness and material thickness measurement on selected gauge models.
Special transducers are available for taking thickness measurements on high temperature surfaces.
Super Standard
High power transducer for increased range and penetration through sound absorbing materials.
High Damped
Limiting the duration or decreasing the amplitude of vibrations. For use with EE (ThruPaint™) only.
Composite
High gain transducer for increased power and penetration.
High Resolution
Features increased near surface resolution, ideal for use on thin substrates.
Coating Thickness
Utilising ThruPaint™ technology these transducers are capable of simultaneous measurement of coating and material thickness.
-
- Technical Information
-
Technical InformationDual Element TransducersMaterial Thickness Transducers
Part Number Probe Diameter Probe Configuration Connector Type Suitable for measuring Suitable for Damping1
ThruPaint™
Potted right angle
Microdot
Cast Iron
Plastics
Thin Plastics
Fibreglass
Thin Fibreglass
Steel
Glass
Aluminium
Titanium
MTG4
MTG6
MTG8
1.00 MHz Dual Element Thickness Transducer TXC1M00EP-2 1/2" Right Angle S 2.25MHz Dual Element Thickness Transducer TXC2M25CP-2 1/4" Right Angle S TXC2M25EP-2 1/2" Right Angle S 3.50MHz Dual Element Thickness Transducer TXC3M50EP-1 1/2" Right Angle S 5.00MHz Dual Element Thickness Transducer TXC5M00BP-4 3/16" Right Angle S TXC5M00CP-4 1/4" Right Angle S TXC5M00CP-10 2 1/4" Right Angle H TXC5M00CP-8 1/4" Potted Top Entry H TXC5M00EP-3 1/2" Right Angle S 7.50MHz Dual Element Thickness Transducer TXC7M50BP-3 3/16" Right Angle S TXC7M50CP-4 1/4" Right Angle S TXC7M50CP-6 2 1/4" Right Angle H 10.0MHz Dual Element Thickness Transducer TXC10M0BP-1 3/16" Right Angle S TXC10M0CP-4 1/4" Right Angle S Corrosion Thickness TransducersPart Number Probe Diameter Probe Characteristic Connector Type Suitable for measuring Suitable for Damping1
ThruPaint™
Potted
Microdot
Lemo
Top
Side
End
Cast Iron
Plastics
Thin Plastics
Fibreglass
Thin Fibreglass
Steel
Glass
Aluminium
Titanium
CG70
CG100
FD700
1.00 MHz Dual Element Thickness Transducer TX1M00EP-2 1/2" Standard S TX1M00EP-3 1/2" Composite S 2.25 MHz Dual Element Thickness Transducer TX2M25CP-2 1/4" Standard S TX2M25CM-2 1/4" Standard S TX2M25EP-2 1/2" Standard S 5.00 MHz Dual Element Thickness Transducer TX5M00BP-4 3/16" Coating Thickness CT TX5M00CP-4 1/4" Standard S TX5M00CP-10 1/4" Standard H TX5M00CP-6 1/4" Coating Thickness CT TX5M00CM-3 1/4" Coating Thickness CT TX5M00CM-4 1/4" Hi Temp3 H TX5M00EP-3 1/2" Standard S TF5M00F 10mm Short Focus S 7.50 MHz Dual Element Thickness Transducer TX7M50BP-3 3/16" Coating Thickness CT TX7M50CP-5 1/4" Coating Thickness CT 10.00 MHz Dual Element Thickness Transducer TX10M0CP-4 1/4" Standard S 1.00 MHz Dual Element Thickness Transducer Part Number TXC1M00EP-2 Probe Diameter 1/2" Probe Configuration Right Angle Damping1 S ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 2.25MHz Dual Element Thickness Transducer Part Number TXC2M25CP-2 Probe Diameter 1/4" Probe Configuration Right Angle Damping1 S ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 Part Number TXC2M25EP-2 Probe Diameter 1/2" Probe Configuration Right Angle Damping1 S ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 3.50MHz Dual Element Thickness Transducer Part Number TXC3M50EP-1 Probe Diameter 1/2" Probe Configuration Right Angle Damping1 S ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 5.00MHz Dual Element Thickness Transducer Part Number TXC5M00BP-4 Probe Diameter 3/16" Probe Configuration Right Angle Damping1 S ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 Part Number TXC5M00CP-4 Probe Diameter 1/4" Probe Configuration Right Angle Damping1 S ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 Part Number TXC5M00CP-10 2 Probe Diameter 1/4" Probe Configuration Right Angle Damping1 H ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 Part Number TXC5M00CP-8 Probe Diameter 1/4" Probe Configuration Potted Top Entry Damping1 H ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 Part Number TXC5M00EP-3 Probe Diameter 1/2" Probe Configuration Right Angle Damping1 S ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 7.50MHz Dual Element Thickness Transducer Part Number TXC7M50BP-3 Probe Diameter 3/16" Probe Configuration Right Angle Damping1 S ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 Part Number TXC7M50CP-4 Probe Diameter 1/4" Probe Configuration Right Angle Damping1 S ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 Part Number TXC7M50CP-6 2 Probe Diameter 1/4" Probe Configuration Right Angle Damping1 H ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 10.0MHz Dual Element Thickness Transducer Part Number TXC10M0BP-1 Probe Diameter 3/16" Probe Configuration Right Angle Damping1 S ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 Part Number TXC10M0CP-4 Probe Diameter 1/4" Probe Configuration Right Angle Damping1 S ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 1.00 MHz Dual Element Thickness Transducer Part Number TX1M00EP-2 Probe Diameter 1/2" Probe Characteristic Standard Damping1 S ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 Part Number TX1M00EP-3 Probe Diameter 1/2" Probe Characteristic Composite Damping1 S ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 2.25 MHz Dual Element Thickness Transducer Part Number TX2M25CP-2 Probe Diameter 1/4" Probe Characteristic Standard Damping1 S ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 Part Number TX2M25CM-2 Probe Diameter 1/4" Probe Characteristic Standard Damping1 S ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 Part Number TX2M25EP-2 Probe Diameter 1/2" Probe Characteristic Standard Damping1 S ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 5.00 MHz Dual Element Thickness Transducer Part Number TX5M00BP-4 Probe Diameter 3/16" Probe Characteristic Coating Thickness Damping1 CT ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 Part Number TX5M00CP-4 Probe Diameter 1/4" Probe Characteristic Standard Damping1 S ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 Part Number TX5M00CP-10 Probe Diameter 1/4" Probe Characteristic Standard Damping1 H ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 Part Number TX5M00CP-6 Probe Diameter 1/4" Probe Characteristic Coating Thickness Damping1 CT ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 Part Number TX5M00CM-3 Probe Diameter 1/4" Probe Characteristic Coating Thickness Damping1 CT ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 Part Number TX5M00CM-4 Probe Diameter 1/4" Probe Characteristic Hi Temp3 Damping1 H ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 Part Number TX5M00EP-3 Probe Diameter 1/2" Probe Characteristic Standard Damping1 S ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 Part Number TF5M00F Probe Diameter 10mm Probe Characteristic Short Focus Damping1 S ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 7.50 MHz Dual Element Thickness Transducer Part Number TX7M50BP-3 Probe Diameter 3/16" Probe Characteristic Coating Thickness Damping1 CT ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 Part Number TX7M50CP-5 Probe Diameter 1/4" Probe Characteristic Coating Thickness Damping1 CT ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 10.00 MHz Dual Element Thickness Transducer Part Number TX10M0CP-4 Probe Diameter 1/4" Probe Characteristic Standard Damping1 S ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 1 Damping:S - Standard undamped Transducer, CT - Damped Coating Thickness Transducer, H - Highly Damped Transducer
2To be used for coatings with a thickness of up to 1mm
3 High temperature probes suitable for measuring 482°C (900°F)
Please refer to the Data Sheet for a full technical specification of Elcometer Dual Element Transducers
-
- Downloads
-
Downloads
-
Elcometer MTG Dual Element Transducer - Datasheet
-
Elcometer CG70 and CG100 Dual Element Transducer - Datasheet
-
Elcometer Ultrasonic Transducer Options - Datasheet
-
Typical Range Of Elcometer MTG/PTG Transducers On Various Materials
-
Dual Element Transducer - Application Guide Part 1
-
Dual Element Transducer - Application Guide Part 2
- Part Numbers
-
Part NumbersDual Element Transducers
-
1.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Standard
- Part Number : TX1M00EP-1
-
1.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Standard
- Part Number : TX1M00EP-2
-
1.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Standard
- Part Number : TX1M00EM-1
-
1.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Standard
- Part Number : TX1M00EM-2
-
1.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Composite
- Part Number : TX1M00EP-3
-
1.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Composite
- Part Number : TX1M00EL
-
2.25 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Standard
- Part Number : TX2M25CP-1
-
2.25 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Standard
- Part Number : TX2M25CP-2
-
2.25 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Standard
- Part Number : TX2M25CM-1
-
2.25 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Standard
- Part Number : TX2M25CM-2
-
2.25 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Hi Temp
- Part Number : TX2M25CP-3
-
2.25 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Hi Temp
- Part Number : TX2M25CM-3
-
2.25 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Standard
- Part Number : TX2M25EP-1
-
2.25 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Standard
- Part Number : TX2M25EP-2
-
2.25 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Standard
- Part Number : TX2M25EM-1
-
2.25 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Standard
- Part Number : TX2M25EM-2
-
2.25 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Hi Temp
- Part Number : TX2M25EP-3
-
2.25 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Hi Temp
- Part Number : TX2M25EM-3
-
2.25 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Composite
- Part Number : TX2M25EP-4
-
2.25 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Armoured
- Part Number : TX2M25EL-1
-
3.50 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Standard
- Part Number : TX3M50EP-4
-
3.50 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Coating Thickness
- Part Number : TX3M50EP-1
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 3/16"
- Probe Configuration: Standard
- Part Number : TX5M00BP-2
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 3/16"
- Probe Configuration: Standard
- Part Number : TX5M00BP-3
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 3/16"
- Probe Configuration: Standard
- Part Number : TX5M00BP-5
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 3/16"
- Probe Configuration: Standard
- Part Number : TX5M00BM
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 3/16"
- Probe Configuration: Low Profile
- Part Number : TX5M00BP-1
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 3/16"
- Probe Configuration: Coating Thickness
- Part Number : TX5M00BP-4
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Standard
- Part Number : TX5M00CP-3
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Standard
- Part Number : TX5M00CP-9
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Standard
- Part Number : TX5M00CP-4
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Standard
- Part Number : TX5M00CP-10
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Standard
- Part Number : TX5M00CM-1
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Standard
- Part Number : TX5M00CM-2
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Standard
- Part Number : TX5M00CM-9
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Low Profile 1" Wand
- Part Number : TX5M00CP-1
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Low Profile 9" Wand
- Part Number : TX5M00CP-2
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Coating Thickness
- Part Number : TX5M00CP-6
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Coating Thickness
- Part Number : TX5M00CM-3
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Hi Temp
- Part Number : TX5M00CP-7
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Hi Temp
- Part Number : TX5M00CP-8
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Hi Temp
- Part Number : TX5M00CM-4
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Hi Temp
- Part Number : TX5M00CM-5
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Standard
- Part Number : TX5M00EP-2
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Standard
- Part Number : TX5M00EP-3
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Standard
- Part Number : TX5M00EP-10
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Standard
- Part Number : TX5M00EM-1
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Standard
- Part Number : TX5M00EM-2
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Coating Thickness
- Part Number : TX5M00EP-4
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Hi Temp
- Part Number : TX5M00EP-5
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Hi Temp
- Part Number : TX5M00EM-3
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Hi Temp
- Part Number : TX5M00EM-4
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Hi Temp
- Part Number : TX5M00EP-6
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Cylinder Probe - Aluminium
- Part Number : TX5M00EL-1
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Cylinder Probe - Aluminium
- Part Number : TX5M00EP-1
-
7.50 MHz Dual Element Thickness Transducer- Probe Diameter: 3/16"
- Probe Configuration: Standard
- Frequency: 7.50MHz
- Part Number : TX7M50BP-1
-
7.50 MHz Dual Element Thickness Transducer- Probe Diameter: 3/16"
- Probe Configuration: Standard
- Frequency: 7.50MHz
- Part Number : TX7M50BP-2
-
7.50 MHz Dual Element Thickness Transducer- Probe Diameter: 3/16"
- Probe Configuration: Coating Thickness
- Frequency: 7.50MHz
- Part Number : TX7M50BP-3
-
7.50 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Exxon Spec
- Frequency: 7.50MHz
- Part Number : TX7M50CP-1
-
7.50 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Exxon Spec
- Frequency: 7.50MHz
- Part Number : TX7M50CP-2
-
7.50 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Exxon Spec
- Frequency: 7.50MHz
- Part Number : TX7M50CM-1
-
7.50 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Exxon Spec
- Frequency: 7.50MHz
- Part Number : TX7M50CM-2
-
7.50 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: High Resolution
- Frequency: 7.50MHz
- Part Number : TX7M50CP-3
-
7.50 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: High Resolution
- Frequency: 7.50MHz
- Part Number : TX7M50CP-4
-
7.50 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Standard
- Frequency: 7.50MHz
- Part Number : TX7M50CP-6
-
7.50 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Coating Thickness
- Frequency: 7.50MHz
- Part Number : TX7M50CP-5
-
7.50 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: High Resolution
- Frequency: 7.50MHz
- Part Number : TX7M50CM-3
-
7.50 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: High Resolution
- Frequency: 7.50MHz
- Part Number : TX7M50CM-4
-
10.00 MHz Dual Element Thickness Transducer- Probe Diameter: 3/16"
- Probe Configuration: Standard
- Frequency: 10.00MHz
- Part Number : TX10M0BP-1
-
10.00 MHz Dual Element Thickness Transducer- Probe Diameter: 3/16"
- Probe Configuration: Standard
- Frequency: 10.00MHz
- Part Number : TX10M0BP-2
-
10.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Standard
- Frequency: 10.00MHz
- Part Number : TX10M0CP-3
-
10.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Standard
- Frequency: 10.00MHz
- Part Number : TX10M0CP-4
-
10.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Standard
- Frequency: 10.00MHz
- Part Number : TX10M0CM-1
-
10.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Standard
- Frequency: 10.00MHz
- Part Number : TX10M0CM-2
-
10.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Low Profile 1" Wand
- Frequency: 10.00MHz
- Part Number : TX10M0CP-1
-
10.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Low Profile 9" Wand
- Frequency: 10.00MHz
- Part Number : TX10M0CP-2
-
10.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Standard
- Frequency: 10.00MHz
- Part Number : TX10M0EP-2
-
10.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Standard
- Frequency: 10.00MHz
- Part Number : TX10M0EP-3
-
10.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Standard
- Frequency: 10.00MHz
- Part Number : TX10M0EM-1
-
10.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Standard
- Frequency: 10.00MHz
- Part Number : TX10M0EM-2
-
10.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Cylinder Probe - Aluminium
- Frequency: 10.00MHz
- Part Number : TX10M0EP-1
-
5.00 MHz Dual Element Thickness Transducer- Probe Diameter: 10mm
- Probe Configuration: Short Focus
- Part Number : TF5M00F
-
1.00 MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Right Angle
- Part Number : TXC1M00EP-2
-
10.0MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Right Angle
- Part Number : TXC10M0BP-1
-
Dual Element Transducers- Probe Diameter: 1/4"
- Probe Configuration: Right Angle
- Part Number : TXC10M0CP-4
-
2.25MHz Dual Element Thickness Transducer- Probe Diameter: 1/4"
- Probe Configuration: Right Angle
- Part Number : TXC2M25CP-2
-
Dual Element Transducers- Probe Diameter: 1/2"
- Probe Configuration: Right Angle
- Part Number : TXC2M25EP-2
-
3.50MHz Dual Element Thickness Transducer- Probe Diameter: 1/2"
- Probe Configuration: Right Angle
- Part Number : TXC3M50EP-1
-
5.00MHz Dual Element Thickness Transducer- Probe Diameter: 3/16"
- Probe Configuration: Right Angle
- Part Number : TXC5M00BP-4
-
Dual Element Transducers- Probe Diameter: 1/4"
- Probe Configuration: Right Angle
- Part Number : TXC5M00CP-4
-
Dual Element Transducers- Probe Diameter: 1/4"
- Probe Configuration: Hi Temp
- Part Number : TXC5M00CP-8
-
Dual Element Transducers- Probe Diameter: 1/2"
- Probe Configuration: Right Angle
- Part Number : TXC5M00EP-3
-
7.50MHz Dual Element Thickness Transducer- Probe Diameter: 3/16"
- Probe Configuration: Right Angle
- Part Number : TXC7M50BP-3
-
Dual Element Transducers- Probe Diameter: 1/4"
- Probe Configuration: Right Angle
- Part Number : TXC7M50CP-4
-
Dual Element Transducers- Probe Diameter: 1/4"
- Probe Configuration: Right Angle
- Part Number : TXC7M50CP-6
-
Dual Element Transducers- Probe Diameter: 1/4"
- Probe Configuration: Right Angle
- Part Number : TXC5M00CP-10
Dual Element Transducers
The Elcometer range of Dual Element Transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
Summary
Dual Element Transducers
Dual element material thickness transducers are ideal for inspecting metal substrates but can also measure thicknesses of other materials, such as plastic, composites or fibreglass.
Downloads-
Elcometer MTG Dual Element Transducer - Datasheet
-
Elcometer CG70 and CG100 Dual Element Transducer - Datasheet
-
Elcometer Ultrasonic Transducer Options - Datasheet
-
Typical Range Of Elcometer MTG/PTG Transducers On Various Materials
-
Dual Element Transducer - Application Guide Part 1
-
Dual Element Transducer - Application Guide Part 2
Key Features
Dual Element Transducers
A dual element transducer consists of two crystal elements housed in the same casing, separated by an acoustic barrier. One crystal transmits sound energy whilst the other crystal receives any reflected sound energy.
Frequency and Diameter Disks
Transducers can be selected by frequency and the size of crystal. Frequency of a transducer is determined by the type of material and expected thickness range. The choice of the crystal size is determined by the access, shape and surface finish of the object to be measured. Each ultrasonic transducer can be easily identified by the disk on the top.
Dual Element Transducer Characteristics Explained
Dual Element Transducers denoted as HD/CT (Highly Damped Transducer/ Damped Coating Thickness Transducer) are necessary when using the Echo-Echo ThruPaint™ (E-E) measurement mode. Additionally CT (Damped Coating Thickness Transducer) enables simultaneous coating thickness and material thickness measurement on selected gauge models.
Special transducers are available for taking thickness measurements on high temperature surfaces.
Super Standard
High power transducer for increased range and penetration through sound absorbing materials.High Damped
Limiting the duration or decreasing the amplitude of vibrations. For use with EE (ThruPaint™) only.Composite
High gain transducer for increased power and penetration.High Resolution
Features increased near surface resolution, ideal for use on thin substrates.Coating Thickness
Utilising ThruPaint™ technology these transducers are capable of simultaneous measurement of coating and material thickness.Technical InformationDual Element TransducersMaterial Thickness TransducersPart Number Probe Diameter Probe Configuration Connector Type Suitable for measuring Suitable for Damping1
ThruPaint™
Potted right angle
Microdot
Cast Iron
Plastics
Thin Plastics
Fibreglass
Thin Fibreglass
Steel
Glass
Aluminium
Titanium
MTG4
MTG6
MTG8
1.00 MHz Dual Element Thickness Transducer TXC1M00EP-2 1/2" Right Angle S 2.25MHz Dual Element Thickness Transducer TXC2M25CP-2 1/4" Right Angle S TXC2M25EP-2 1/2" Right Angle S 3.50MHz Dual Element Thickness Transducer TXC3M50EP-1 1/2" Right Angle S 5.00MHz Dual Element Thickness Transducer TXC5M00BP-4 3/16" Right Angle S TXC5M00CP-4 1/4" Right Angle S TXC5M00CP-10 2 1/4" Right Angle H TXC5M00CP-8 1/4" Potted Top Entry H TXC5M00EP-3 1/2" Right Angle S 7.50MHz Dual Element Thickness Transducer TXC7M50BP-3 3/16" Right Angle S TXC7M50CP-4 1/4" Right Angle S TXC7M50CP-6 2 1/4" Right Angle H 10.0MHz Dual Element Thickness Transducer TXC10M0BP-1 3/16" Right Angle S TXC10M0CP-4 1/4" Right Angle S Corrosion Thickness TransducersPart Number Probe Diameter Probe Characteristic Connector Type Suitable for measuring Suitable for Damping1
ThruPaint™
Potted
Microdot
Lemo
Top
Side
End
Cast Iron
Plastics
Thin Plastics
Fibreglass
Thin Fibreglass
Steel
Glass
Aluminium
Titanium
CG70
CG100
FD700
1.00 MHz Dual Element Thickness Transducer TX1M00EP-2 1/2" Standard S TX1M00EP-3 1/2" Composite S 2.25 MHz Dual Element Thickness Transducer TX2M25CP-2 1/4" Standard S TX2M25CM-2 1/4" Standard S TX2M25EP-2 1/2" Standard S 5.00 MHz Dual Element Thickness Transducer TX5M00BP-4 3/16" Coating Thickness CT TX5M00CP-4 1/4" Standard S TX5M00CP-10 1/4" Standard H TX5M00CP-6 1/4" Coating Thickness CT TX5M00CM-3 1/4" Coating Thickness CT TX5M00CM-4 1/4" Hi Temp3 H TX5M00EP-3 1/2" Standard S TF5M00F 10mm Short Focus S 7.50 MHz Dual Element Thickness Transducer TX7M50BP-3 3/16" Coating Thickness CT TX7M50CP-5 1/4" Coating Thickness CT 10.00 MHz Dual Element Thickness Transducer TX10M0CP-4 1/4" Standard S 1.00 MHz Dual Element Thickness Transducer Part Number TXC1M00EP-2 Probe Diameter 1/2" Probe Configuration Right Angle Damping1 S ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 2.25MHz Dual Element Thickness Transducer Part Number TXC2M25CP-2 Probe Diameter 1/4" Probe Configuration Right Angle Damping1 S ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 Part Number TXC2M25EP-2 Probe Diameter 1/2" Probe Configuration Right Angle Damping1 S ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 3.50MHz Dual Element Thickness Transducer Part Number TXC3M50EP-1 Probe Diameter 1/2" Probe Configuration Right Angle Damping1 S ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 5.00MHz Dual Element Thickness Transducer Part Number TXC5M00BP-4 Probe Diameter 3/16" Probe Configuration Right Angle Damping1 S ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 Part Number TXC5M00CP-4 Probe Diameter 1/4" Probe Configuration Right Angle Damping1 S ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 Part Number TXC5M00CP-10 2 Probe Diameter 1/4" Probe Configuration Right Angle Damping1 H ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 Part Number TXC5M00CP-8 Probe Diameter 1/4" Probe Configuration Potted Top Entry Damping1 H ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 Part Number TXC5M00EP-3 Probe Diameter 1/2" Probe Configuration Right Angle Damping1 S ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 7.50MHz Dual Element Thickness Transducer Part Number TXC7M50BP-3 Probe Diameter 3/16" Probe Configuration Right Angle Damping1 S ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 Part Number TXC7M50CP-4 Probe Diameter 1/4" Probe Configuration Right Angle Damping1 S ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 Part Number TXC7M50CP-6 2 Probe Diameter 1/4" Probe Configuration Right Angle Damping1 H ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 10.0MHz Dual Element Thickness Transducer Part Number TXC10M0BP-1 Probe Diameter 3/16" Probe Configuration Right Angle Damping1 S ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 Part Number TXC10M0CP-4 Probe Diameter 1/4" Probe Configuration Right Angle Damping1 S ThruPaint™ Connector Type Potted right angle Microdot Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for MTG4 MTG6 MTG8 1.00 MHz Dual Element Thickness Transducer Part Number TX1M00EP-2 Probe Diameter 1/2" Probe Characteristic Standard Damping1 S ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 Part Number TX1M00EP-3 Probe Diameter 1/2" Probe Characteristic Composite Damping1 S ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 2.25 MHz Dual Element Thickness Transducer Part Number TX2M25CP-2 Probe Diameter 1/4" Probe Characteristic Standard Damping1 S ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 Part Number TX2M25CM-2 Probe Diameter 1/4" Probe Characteristic Standard Damping1 S ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 Part Number TX2M25EP-2 Probe Diameter 1/2" Probe Characteristic Standard Damping1 S ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 5.00 MHz Dual Element Thickness Transducer Part Number TX5M00BP-4 Probe Diameter 3/16" Probe Characteristic Coating Thickness Damping1 CT ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 Part Number TX5M00CP-4 Probe Diameter 1/4" Probe Characteristic Standard Damping1 S ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 Part Number TX5M00CP-10 Probe Diameter 1/4" Probe Characteristic Standard Damping1 H ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 Part Number TX5M00CP-6 Probe Diameter 1/4" Probe Characteristic Coating Thickness Damping1 CT ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 Part Number TX5M00CM-3 Probe Diameter 1/4" Probe Characteristic Coating Thickness Damping1 CT ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 Part Number TX5M00CM-4 Probe Diameter 1/4" Probe Characteristic Hi Temp3 Damping1 H ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 Part Number TX5M00EP-3 Probe Diameter 1/2" Probe Characteristic Standard Damping1 S ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 Part Number TF5M00F Probe Diameter 10mm Probe Characteristic Short Focus Damping1 S ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 7.50 MHz Dual Element Thickness Transducer Part Number TX7M50BP-3 Probe Diameter 3/16" Probe Characteristic Coating Thickness Damping1 CT ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 Part Number TX7M50CP-5 Probe Diameter 1/4" Probe Characteristic Coating Thickness Damping1 CT ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 10.00 MHz Dual Element Thickness Transducer Part Number TX10M0CP-4 Probe Diameter 1/4" Probe Characteristic Standard Damping1 S ThruPaint™ Connector Type Potted Microdot Lemo Top Side End Suitable for measuring Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium Suitable for CG70 CG100 FD700 1 Damping:S - Standard undamped Transducer, CT - Damped Coating Thickness Transducer, H - Highly Damped Transducer
2To be used for coatings with a thickness of up to 1mm
3 High temperature probes suitable for measuring 482°C (900°F)
Please refer to the Data Sheet for a full technical specification of Elcometer Dual Element TransducersPart NumbersDual Element Transducers-
1.00 MHz Dual Element Thickness Transducer
- Probe Diameter: 1/2"
- Probe Configuration: Standard
- Part Number : TX1M00EP-1
-
1.00 MHz Dual Element Thickness Transducer
- Probe Diameter: 1/2"
- Probe Configuration: Standard
- Part Number : TX1M00EP-2
-
1.00 MHz Dual Element Thickness Transducer
- Probe Diameter: 1/2"
- Probe Configuration: Standard
- Part Number : TX1M00EM-1
-
1.00 MHz Dual Element Thickness Transducer
- Probe Diameter: 1/2"
- Probe Configuration: Standard
- Part Number : TX1M00EM-2
-
1.00 MHz Dual Element Thickness Transducer
- Probe Diameter: 1/2"
- Probe Configuration: Composite
- Part Number : TX1M00EP-3
-
1.00 MHz Dual Element Thickness Transducer
- Probe Diameter: 1/2"
- Probe Configuration: Composite
- Part Number : TX1M00EL
-
2.25 MHz Dual Element Thickness Transducer
- Probe Diameter: 1/4"
- Probe Configuration: Standard
- Part Number : TX2M25CP-1
-
2.25 MHz Dual Element Thickness Transducer
- Probe Diameter: 1/4"
- Probe Configuration: Standard
- Part Number : TX2M25CP-2
-
2.25 MHz Dual Element Thickness Transducer
- Probe Diameter: 1/4"
- Probe Configuration: Standard
-
-