Elcometer Protective Inspection Kit for Hazardous Areas
- Protective Coatings
The Elcometer Hazardous Area Inspection Kit is a protective coating inspection kit suitable for use in hazardous areas where electronic equipment is prohibited.
- Summary
-
Summary
-
The kit provides all the tools required for the on-site inspection of a coating, including surface profile, dewpoint, relative humidity, both wet and dry film thickness and also adhesive testing.
Measurement parameters include:
• Surface inspection
• Surface profile
• Surface contamination
• Climatic conditions
• Coating thickness
• AdhesionThe products contained in this kit are not tested and approved for use in Hazardous Areas. Site Management should be consulted before this kit is used.
-
- Key Features
-
Key Features
Elcometer Protective Inspection Kit for Hazardous Areas
Kit Contents:
Model Description Elcometer 128 Pictorial Standards¹ Elcometer 125 Surface Comparator, Grit Elcometer 125 Surface Comparator, Shot Elcometer 122 Testex Tape, Coarse Elcometer 122 Testex Tape, Extra Coarse Elcometer 124 Testex Dial Thickness Gauge Elcometer 131/1C Telescopic Inspection Mirror Elcometer 134 Chlor*Test Surface Testing Kit Elcometer 113 Magnetic Thermometer °C (°F) Elcometer 116 Whirling Hygrometer °C (Metric), Sling Hygrometer °F (Imperial) Elcometer 114 Dewpoint Calculator Elcometer 112 Hexagonal Wet Film Comb: 25 -3000µm (1 - 120mils) Elcometer 211 Thickness Gauge Elcometer 107 Cross Hatch Full Kit - ISO (ASTM) Tape, Brush & Eye Glass ¹ Swedish Rust Standard ISO 8501, SIS055900 supplied in Metric Kit, US Standard SSPC VIS 1-01 and VIS-3 supplied in Imperial Kit
-
- Technical Information
-
Technical SpecificationElcometer Protective Inspection Kit for Hazardous Areas
Part Number Description Metric Imperial YKIT-HAZARD-1M YKIT-HAZARD-1E Elcometer Hazardous Area Inspection Kit Dimensions 495 x 420 x 175mm (19.49 x 16.54 x 6.89”) Part Number Metric Imperial YKIT-HAZARD-1M YKIT-HAZARD-1E Description Elcometer Hazardous Area Inspection Kit Dimensions 495 x 420 x 175mm (19.49 x 16.54 x 6.89”)
-
- Standards
-
StandardsElcometer Protective Inspection Kit for Hazardous Areas
AS 1580.408.4, AS 2331.1.3, AS 3894.3-A, AS 3894.5, AS 3894.9, AS/NZS 1580.107.3, AS/NZS 1580.108.1, ASTM B 499, ASTM D 2200, ASTM D 3359-B, ASTM D 4414-A, ASTM D 4417-A, ASTM D 4417-C, ASTM G 12, BS 3900-C5-6A, BS 3900-C5-7B, BS 3900-E6, BS 5411-11, BS 7079-C5, DIN 50981, ECCA T6, EN 13523-6, IMO MSC.215(82), IMO MSC.244(83), ISO 16276-2, ISO 2178, ISO 2409, ISO 2808-1A, ISO 2808-6A, ISO 2808-7A, ISO 2808-7B, ISO 8501-1, ISO 8503-1, ISO 8502-5, ISO 8503-2, ISO 8503-5, JIS K 5600-1-7, JIS K 5600-5-6, NACE RP0287, NF T30-038, NF T 30-124, NF T30-125, SS 55900, SSPC Guide 15, SSPC-PA2, SSPC VIS 1, SSPC VIS 2, SSPC VIS 3, SSPC VIS 4, SSPC VIS 5, US Navy NSI 009-32, US Navy PPI 63101-000
Standards in grey have been superseded but are still recognised in some industries.
-
- Downloads
-
Downloads
-
Elcometer Protective Inspection Kit for Hazardous Areas Datasheet
- Part Numbers
-
Part NumbersElcometer Protective Inspection Kit for Hazardous Areas
-
Elcometer Hazardous Area Inspection Kit - MetricThe Elcometer Hazardous Area Inspection Kit is a protective coating inspection kit suitable for use in hazardous areas where electronic equipment is prohibited. This has dimensions of 495 x 420 x 175mm .
- Dimensions: 495 x 420 x 175mm (19.49 x 16.54 x 6.89”)
- Part Number : YKIT-HAZARD-1M
- Certification : No Certificate
-
Elcometer Hazardous Area Inspection Kit - ImperialThe Elcometer Hazardous Area Inspection Kit is a protective coating inspection kit suitable for use in hazardous areas where electronic equipment is prohibited. This has dimensions of 19.49 x 16.54 x 6.89”.
- Dimensions: 495 x 420 x 175mm (19.49 x 16.54 x 6.89”)
- Part Number : YKIT-HAZARD-1E
- Certification : No Certificate
Elcometer Protective Inspection Kit for Hazardous Areas
- Protective Coatings
The Elcometer Hazardous Area Inspection Kit is a protective coating inspection kit suitable for use in hazardous areas where electronic equipment is prohibited.
Summary
Elcometer Protective Inspection Kit for Hazardous Areas
The kit provides all the tools required for the on-site inspection of a coating, including surface profile, dewpoint, relative humidity, both wet and dry film thickness and also adhesive testing.
Measurement parameters include:
• Surface inspection
• Surface profile
• Surface contamination
• Climatic conditions
• Coating thickness
• AdhesionThe products contained in this kit are not tested and approved for use in Hazardous Areas. Site Management should be consulted before this kit is used.
Key Features
Elcometer Protective Inspection Kit for Hazardous Areas
Kit Contents:
Model Description Elcometer 128 Pictorial Standards¹ Elcometer 125 Surface Comparator, Grit Elcometer 125 Surface Comparator, Shot Elcometer 122 Testex Tape, Coarse Elcometer 122 Testex Tape, Extra Coarse Elcometer 124 Testex Dial Thickness Gauge Elcometer 131/1C Telescopic Inspection Mirror Elcometer 134 Chlor*Test Surface Testing Kit Elcometer 113 Magnetic Thermometer °C (°F) Elcometer 116 Whirling Hygrometer °C (Metric), Sling Hygrometer °F (Imperial) Elcometer 114 Dewpoint Calculator Elcometer 112 Hexagonal Wet Film Comb: 25 -3000µm (1 - 120mils) Elcometer 211 Thickness Gauge Elcometer 107 Cross Hatch Full Kit - ISO (ASTM) Tape, Brush & Eye Glass ¹ Swedish Rust Standard ISO 8501, SIS055900 supplied in Metric Kit, US Standard SSPC VIS 1-01 and VIS-3 supplied in Imperial Kit
Technical SpecificationElcometer Protective Inspection Kit for Hazardous AreasPart Number Description Metric Imperial YKIT-HAZARD-1M YKIT-HAZARD-1E Elcometer Hazardous Area Inspection Kit Dimensions 495 x 420 x 175mm (19.49 x 16.54 x 6.89”) Part Number Metric Imperial YKIT-HAZARD-1M YKIT-HAZARD-1E Description Elcometer Hazardous Area Inspection Kit Dimensions 495 x 420 x 175mm (19.49 x 16.54 x 6.89”) StandardsElcometer Protective Inspection Kit for Hazardous AreasAS 1580.408.4, AS 2331.1.3, AS 3894.3-A, AS 3894.5, AS 3894.9, AS/NZS 1580.107.3, AS/NZS 1580.108.1, ASTM B 499, ASTM D 2200, ASTM D 3359-B, ASTM D 4414-A, ASTM D 4417-A, ASTM D 4417-C, ASTM G 12, BS 3900-C5-6A, BS 3900-C5-7B, BS 3900-E6, BS 5411-11, BS 7079-C5, DIN 50981, ECCA T6, EN 13523-6, IMO MSC.215(82), IMO MSC.244(83), ISO 16276-2, ISO 2178, ISO 2409, ISO 2808-1A, ISO 2808-6A, ISO 2808-7A, ISO 2808-7B, ISO 8501-1, ISO 8503-1, ISO 8502-5, ISO 8503-2, ISO 8503-5, JIS K 5600-1-7, JIS K 5600-5-6, NACE RP0287, NF T30-038, NF T 30-124, NF T30-125, SS 55900, SSPC Guide 15, SSPC-PA2, SSPC VIS 1, SSPC VIS 2, SSPC VIS 3, SSPC VIS 4, SSPC VIS 5, US Navy NSI 009-32, US Navy PPI 63101-000
Standards in grey have been superseded but are still recognised in some industries.
Part NumbersElcometer Protective Inspection Kit for Hazardous Areas-
Elcometer Hazardous Area Inspection Kit - Metric
The Elcometer Hazardous Area Inspection Kit is a protective coating inspection kit suitable for use in hazardous areas where electronic equipment is prohibited. This has dimensions of 495 x 420 x 175mm .
- Dimensions: 495 x 420 x 175mm (19.49 x 16.54 x 6.89”)
- Part Number : YKIT-HAZARD-1M
- Certification : No Certificate
-
Elcometer Hazardous Area Inspection Kit - Imperial
The Elcometer Hazardous Area Inspection Kit is a protective coating inspection kit suitable for use in hazardous areas where electronic equipment is prohibited. This has dimensions of 19.49 x 16.54 x 6.89”.
- Dimensions: 495 x 420 x 175mm (19.49 x 16.54 x 6.89”)
- Part Number : YKIT-HAZARD-1E
- Certification : No Certificate
-
-