Elcometer Bolt Tension Monitor Transducers
Elcometer Bolt Tension Transducers
- Summary
-
Summary
-
The BG80TDL Bolt Tension Monitor measures the change in length of a fastener when a load is applied to the fastener.
Within the elastic limit of the fastener, the change of length is proportional to the load applied, and therefore by measuring the change of length and knowing the physical properties of the fastener, the load on the fastener can be calculated.
-
- Technical Information
-
Technical SpecificationElcometer Bolt Tension Monitor Transducers
Elcometer 2.25MHz Bolt Tension Monitor Transducer Part Number TX2M25CM-5 Probe Diameter 1/4" Element Type Si/El Non-Magnetic Probe Characteristic Standard Connector Type Damping* S Potted Microdot Lemo Top Side End Suitable for measuring All Metals Rough Surfaces Castings Billets Extruded Parts Weld Inspection Weld Inspection (Tight Areas) Immersion & Bubbler Inspections Suitable for BG80DL BG80TDL Part Number TX2M25CM-6 Probe Diameter 1/4" Element Type Si/El Magnetic Probe Characteristic Standard Connector Type Damping* S Potted Microdot Lemo Top Side End Suitable for measuring All Metals Rough Surfaces Castings Billets Extruded Parts Weld Inspection Weld Inspection (Tight Areas) Immersion & Bubbler Inspections Suitable for BG80DL BG80TDL Part Number TX2M25DM Probe Diameter 3/8" Element Type Si/El Magnetic Probe Characteristic Standard Connector Type Damping* S Potted Microdot Lemo Top Side End Suitable for measuring All Metals Rough Surfaces Castings Billets Extruded Parts Weld Inspection Weld Inspection (Tight Areas) Immersion & Bubbler Inspections Suitable for BG80DL BG80TDL Part Number TX2M25EM-5 Probe Diameter 1/2" Element Type Si/El Non-Magnetic Probe Characteristic Standard Connector Type Damping* S Potted Microdot Lemo Top Side End Suitable for measuring All Metals Rough Surfaces Castings Billets Extruded Parts Weld Inspection Weld Inspection (Tight Areas) Immersion & Bubbler Inspections Suitable for BG80DL BG80TDL Part Number TX2M25EM-6 Probe Diameter 1/2" Element Type Si/El Magnetic Probe Characteristic Standard Connector Type Damping* S Potted Microdot Lemo Top Side End Suitable for measuring All Metals Rough Surfaces Castings Billets Extruded Parts Weld Inspection Weld Inspection (Tight Areas) Immersion & Bubbler Inspections Suitable for BG80DL BG80TDL Part Number TX2M25GM Probe Diameter 3/4” Element Type Si/El Magnetic Probe Characteristic Standard Connector Type Damping* S Potted Microdot Lemo Top Side End Suitable for measuring All Metals Rough Surfaces Castings Billets Extruded Parts Weld Inspection Weld Inspection (Tight Areas) Immersion & Bubbler Inspections Suitable for BG80DL BG80TDL Elcometer 5.00MHz Bolt Tension Monitor Transducer Part Number TX5M00AM-2 Probe Diameter 1/8" Element Type Si/El Non-Magnetic Probe Characteristic Standard Connector Type Damping* S Potted Microdot Lemo Top Side End Suitable for measuring All Metals Rough Surfaces Castings Billets Extruded Parts Weld Inspection Weld Inspection (Tight Areas) Immersion & Bubbler Inspections Suitable for BG80DL BG80TDL Part Number TX5M00AM-3 Probe Diameter 1/8" Element Type Si/El Magnetic Probe Characteristic Standard Connector Type Damping* S Potted Microdot Lemo Top Side End Suitable for measuring All Metals Rough Surfaces Castings Billets Extruded Parts Weld Inspection Weld Inspection (Tight Areas) Immersion & Bubbler Inspections Suitable for BG80DL BG80TDL Part Number TX5M00CM-8 Probe Diameter 1/4" Element Type Si/El Magnetic Probe Characteristic Standard Connector Type Damping* S Potted Microdot Lemo Top Side End Suitable for measuring All Metals Rough Surfaces Castings Billets Extruded Parts Weld Inspection Weld Inspection (Tight Areas) Immersion & Bubbler Inspections Suitable for BG80DL BG80TDL Part Number TX5M00DM Probe Diameter 3/8" Element Type Si/El Magnetic Probe Characteristic Standard Connector Type Damping* S Potted Microdot Lemo Top Side End Suitable for measuring All Metals Rough Surfaces Castings Billets Extruded Parts Weld Inspection Weld Inspection (Tight Areas) Immersion & Bubbler Inspections Suitable for BG80DL BG80TDL Part Number TX5M00GM Probe Diameter 3/4” Element Type Si/El Magnetic Probe Characteristic Standard Connector Type Damping* S Potted Microdot Lemo Top Side End Suitable for measuring All Metals Rough Surfaces Castings Billets Extruded Parts Weld Inspection Weld Inspection (Tight Areas) Immersion & Bubbler Inspections Suitable for BG80DL BG80TDL Part Number TX5M00EM-6 Probe Diameter 1/2" Element Type Si/El Non-Magnetic Probe Characteristic Standard Connector Type Damping* S Potted Microdot Lemo Top Side End Suitable for measuring All Metals Rough Surfaces Castings Billets Extruded Parts Weld Inspection Weld Inspection (Tight Areas) Immersion & Bubbler Inspections Suitable for BG80DL BG80TDL Part Number TX5M00EM-7 Probe Diameter 1/2" Element Type Si/El Magnetic Probe Characteristic Standard Connector Type Damping* S Potted Microdot Lemo Top Side End Suitable for measuring All Metals Rough Surfaces Castings Billets Extruded Parts Weld Inspection Weld Inspection (Tight Areas) Immersion & Bubbler Inspections Suitable for BG80DL BG80TDL Elcometer 10.00MHz Bolt Tension Monitor Transducer Part Number TX10M0AM-2 Probe Diameter 1/8" Element Type Si/El Non-Magnetic Probe Characteristic Standard Connector Type Damping* S Potted Microdot Lemo Top Side End Suitable for measuring All Metals Rough Surfaces Castings Billets Extruded Parts Weld Inspection Weld Inspection (Tight Areas) Immersion & Bubbler Inspections Suitable for BG80DL BG80TDL Part Number TX10M0AM-3 Probe Diameter 1/8" Element Type Si/El Magnetic Probe Characteristic Standard Connector Type Damping* S Potted Microdot Lemo Top Side End Suitable for measuring All Metals Rough Surfaces Castings Billets Extruded Parts Weld Inspection Weld Inspection (Tight Areas) Immersion & Bubbler Inspections Suitable for BG80DL BG80TDL Part Number TX10M0CM-5 Probe Diameter 1/4" Element Type Si/El Magnetic Probe Characteristic Standard Connector Type Damping* S Potted Microdot Lemo Top Side End Suitable for measuring All Metals Rough Surfaces Castings Billets Extruded Parts Weld Inspection Weld Inspection (Tight Areas) Immersion & Bubbler Inspections Suitable for BG80DL BG80TDL Part Number Probe Diameter Element Type
Probe Characteristic Connector Type Suitable for measuring Suitable for Damping*
Potted
Microdot
Lemo
Top
Side
End
All Metals
Rough Surfaces
Castings
Billets
Extruded Parts
Weld Inspection
Weld Inspection (Tight Areas)
Immersion & Bubbler Inspections
BG80DL
BG80TDL
Elcometer 2.25MHz Bolt Tension Monitor Transducer TX2M25CM-5 1/4" Si/El Non-Magnetic Standard S TX2M25CM-6 1/4" Si/El Magnetic Standard S TX2M25DM 3/8" Si/El Magnetic Standard S TX2M25EM-5 1/2" Si/El Non-Magnetic Standard S TX2M25EM-6 1/2" Si/El Magnetic Standard S TX2M25GM 3/4” Si/El Magnetic Standard S Elcometer 5.00MHz Bolt Tension Monitor Transducer TX5M00AM-2 1/8" Si/El Non-Magnetic Standard S TX5M00AM-3 1/8" Si/El Magnetic Standard S TX5M00CM-8 1/4" Si/El Magnetic Standard S TX5M00DM 3/8" Si/El Magnetic Standard S TX5M00GM 3/4” Si/El Magnetic Standard S TX5M00EM-6 1/2" Si/El Non-Magnetic Standard S TX5M00EM-7 1/2" Si/El Magnetic Standard S Elcometer 10.00MHz Bolt Tension Monitor Transducer TX10M0AM-2 1/8" Si/El Non-Magnetic Standard S TX10M0AM-3 1/8" Si/El Magnetic Standard S TX10M0CM-5 1/4" Si/El Magnetic Standard S *S - Standard Undamped Transducer
-
- Part Numbers
-
Part NumbersElcometer Bolt Tension Monitor Transducers
-
Elcometer 2.25MHz 1/4" Bolt Tension Monitor Transducer- Frequency: 2.25MHz
- Probe Diameter: 1/4"
- Element Type: Si/El Non-Magnetic
- Part Number : TX2M25CM-5
- Certification : No Certificate
-
Elcometer 2.25MHz 1/4" Bolt Tension Monitor Transducer- Frequency: 2.25MHz
- Probe Diameter: 1/4"
- Element Type: Si/El Magnetic
- Part Number : TX2M25CM-6
- Certification : No Certificate
-
Elcometer 2.25MHz 3/8" Bolt Tension Monitor Transducer- Frequency: 2.25MHz
- Probe Diameter: 3/8"
- Element Type: Si/El Magnetic
- Part Number : TX2M25DM
- Certification : No Certificate
-
Elcometer 2.25MHz 1/2" Bolt Tension Monitor Transducer- Frequency: 2.25MHz
- Probe Diameter: 1/2"
- Element Type: Si/El Non-Magnetic
- Part Number : TX2M25EM-5
- Certification : No Certificate
-
Elcometer 2.25MHz 1/2" Bolt Tension Monitor Transducer- Frequency: 2.25MHz
- Probe Diameter: 1/2"
- Element Type: Si/El Magnetic
- Part Number : TX2M25EM-6
- Certification : No Certificate
-
Elcometer 2.25MHz 3/4" Bolt Tension Monitor Transducer- Frequency: 2.25MHz
- Probe Diameter: 3/4”
- Element Type: Si/El Magnetic
- Part Number : TX2M25GM
- Certification : No Certificate
-
Elcometer 5.00MHz 1/8" Bolt Tension Monitor Transducer- Frequency: 5.00MHz
- Probe Diameter: 1/8"
- Element Type: Si/El Non-Magnetic
- Part Number : TX5M00AM-2
- Certification : No Certificate
-
Elcometer 5.00MHz 1/8" Bolt Tension Monitor Transducer- Frequency: 5.00MHz
- Probe Diameter: 1/8"
- Element Type: Si/El Magnetic
- Part Number : TX5M00AM-3
- Certification : No Certificate
-
Elcometer 5.00MHz 1/4" Bolt Tension Monitor Transducer- Frequency: 5.00MHz
- Probe Diameter: 1/4"
- Element Type: Si/El Non-Magnetic
- Part Number : TX5M00CM-7
- Certification : No Certificate
-
Elcometer 5.00MHz 1/4" Bolt Tension Monitor Transducer- Frequency: 5.00MHz
- Probe Diameter: 1/4"
- Element Type: Si/El Magnetic
- Part Number : TX5M00CM-8
- Certification : No Certificate
-
Elcometer 5.00MHz 3/8" Bolt Tension Monitor Transducer- Frequency: 5.00MHz
- Probe Diameter: 3/8"
- Element Type: Si/El Magnetic
- Part Number : TX5M00DM
- Certification : No Certificate
-
Elcometer 5.00MHz 1/2" Bolt Tension Monitor Transducer- Frequency: 5.00MHz
- Probe Diameter: 1/2"
- Element Type: Si/El Magnetic
- Part Number : TX5M00EM-7
- Certification : No Certificate
-
Elcometer 5.00MHz 1/2" Bolt Tension Monitor Transducer- Frequency: 5.00MHz
- Probe Diameter: 1/2"
- Element Type: Si/El Non-Magnetic
- Part Number : TX5M00EM-6
- Certification : No Certificate
-
Elcometer 5.00MHz 3/4" Bolt Tension Montor Transducer- Frequency: 5.00MHz
- Probe Diameter: 3/4”
- Element Type: Si/El Magnetic
- Part Number : TX5M00GM
- Certification : No Certificate
-
Elcometer 10.00MHz 1/8" Bolt Tension Monitor Transducers- Frequency: 10.00MHz
- Probe Diameter: 1/8"
- Element Type: Si/El Non-Magnetic
- Part Number : TX10M0AM-2
- Certification : No Certificate
-
Elcometer 10.00MHz 1/8" Bolt Tension Monitor Transducers- Frequency: 10.00MHz
- Probe Diameter: 1/8"
- Element Type: Si/El Magnetic
- Part Number : TX10M0AM-3
- Certification : No Certificate
-
Elcometer 10.00MHz 1/4" Bolt Tension Monitor Transducers- Frequency: 10.00MHz
- Probe Diameter: 1/4"
- Element Type: Si/El Non-Magnetic
- Part Number : TX10M0CM-4
- Certification : No Certificate
-
Elcometer 10.00MHz 1/4" Bolt Tension Monitor Transducers- Frequency: 10.00MHz
- Probe Diameter: 1/4"
- Element Type: Si/El Magnetic
- Part Number : TX10M0CM-5
- Certification : No Certificate
-
Calibration Bar 3" 4140- Part Number : TW-24029-S1
- Uncertified No Certification
-
Calibration Bar, 3” and 6”, Steel 4140
- Part Number : TW-24029-S2
- Uncertified No Certification
-
Elcometer Bolt Tension Monitor Transducers
Elcometer Bolt Tension Transducers
Summary
Elcometer Bolt Tension Monitor Transducers
The BG80TDL Bolt Tension Monitor measures the change in length of a fastener when a load is applied to the fastener.
Within the elastic limit of the fastener, the change of length is proportional to the load applied, and therefore by measuring the change of length and knowing the physical properties of the fastener, the load on the fastener can be calculated.
Technical Specification
Elcometer Bolt Tension Monitor Transducers
| Elcometer 2.25MHz Bolt Tension Monitor Transducer | |
| Part Number | TX2M25CM-5 |
| Probe Diameter | 1/4" |
| Element Type | Si/El Non-Magnetic |
| Probe Characteristic | Standard |
| Connector Type | |
| Damping* | S |
| Potted | |
| Microdot | |
| Lemo | |
| Top | |
| Side | |
| End | |
| Suitable for measuring | |
| All Metals | |
| Rough Surfaces | |
| Castings | |
| Billets | |
| Extruded Parts | |
| Weld Inspection | |
| Weld Inspection (Tight Areas) | |
| Immersion & Bubbler Inspections | |
| Suitable for | |
| BG80DL | |
| BG80TDL | |
| Part Number | TX2M25CM-6 |
| Probe Diameter | 1/4" |
| Element Type | Si/El Magnetic |
| Probe Characteristic | Standard |
| Connector Type | |
| Damping* | S |
| Potted | |
| Microdot | |
| Lemo | |
| Top | |
| Side | |
| End | |
| Suitable for measuring | |
| All Metals | |
| Rough Surfaces | |
| Castings | |
| Billets | |
| Extruded Parts | |
| Weld Inspection | |
| Weld Inspection (Tight Areas) | |
| Immersion & Bubbler Inspections | |
| Suitable for | |
| BG80DL | |
| BG80TDL | |
| Part Number | TX2M25DM |
| Probe Diameter | 3/8" |
| Element Type | Si/El Magnetic |
| Probe Characteristic | Standard |
| Connector Type | |
| Damping* | S |
| Potted | |
| Microdot | |
| Lemo | |
| Top | |
| Side | |
| End | |
| Suitable for measuring | |
| All Metals | |
| Rough Surfaces | |
| Castings | |
| Billets | |
| Extruded Parts | |
| Weld Inspection | |
| Weld Inspection (Tight Areas) | |
| Immersion & Bubbler Inspections | |
| Suitable for | |
| BG80DL | |
| BG80TDL | |
| Part Number | TX2M25EM-5 |
| Probe Diameter | 1/2" |
| Element Type | Si/El Non-Magnetic |
| Probe Characteristic | Standard |
| Connector Type | |
| Damping* | S |
| Potted | |
| Microdot | |
| Lemo | |
| Top | |
| Side | |
| End | |
| Suitable for measuring | |
| All Metals | |
| Rough Surfaces | |
| Castings | |
| Billets | |
| Extruded Parts | |
| Weld Inspection | |
| Weld Inspection (Tight Areas) | |
| Immersion & Bubbler Inspections | |
| Suitable for | |
| BG80DL | |
| BG80TDL | |
| Part Number | TX2M25EM-6 |
| Probe Diameter | 1/2" |
| Element Type | Si/El Magnetic |
| Probe Characteristic | Standard |
| Connector Type | |
| Damping* | S |
| Potted | |
| Microdot | |
| Lemo | |
| Top | |
| Side | |
| End | |
| Suitable for measuring | |
| All Metals | |
| Rough Surfaces | |
| Castings | |
| Billets | |
| Extruded Parts | |
| Weld Inspection | |
| Weld Inspection (Tight Areas) | |
| Immersion & Bubbler Inspections | |
| Suitable for | |
| BG80DL | |
| BG80TDL | |
| Part Number | TX2M25GM |
| Probe Diameter | 3/4” |
| Element Type | Si/El Magnetic |
| Probe Characteristic | Standard |
| Connector Type | |
| Damping* | S |
| Potted | |
| Microdot | |
| Lemo | |
| Top | |
| Side | |
| End | |
| Suitable for measuring | |
| All Metals | |
| Rough Surfaces | |
| Castings | |
| Billets | |
| Extruded Parts | |
| Weld Inspection | |
| Weld Inspection (Tight Areas) | |
| Immersion & Bubbler Inspections | |
| Suitable for | |
| BG80DL | |
| BG80TDL | |
| Elcometer 5.00MHz Bolt Tension Monitor Transducer | |
| Part Number | TX5M00AM-2 |
| Probe Diameter | 1/8" |
| Element Type | Si/El Non-Magnetic |
| Probe Characteristic | Standard |
| Connector Type | |
| Damping* | S |
| Potted | |
| Microdot | |
| Lemo | |
| Top | |
| Side | |
| End | |
| Suitable for measuring | |
| All Metals | |
| Rough Surfaces | |
| Castings | |
| Billets | |
| Extruded Parts | |
| Weld Inspection | |
| Weld Inspection (Tight Areas) | |
| Immersion & Bubbler Inspections | |
| Suitable for | |
| BG80DL | |
| BG80TDL | |
| Part Number | TX5M00AM-3 |
| Probe Diameter | 1/8" |
| Element Type | Si/El Magnetic |
| Probe Characteristic | Standard |
| Connector Type | |
| Damping* | S |
| Potted | |
| Microdot | |
| Lemo | |
| Top | |
| Side | |
| End | |
| Suitable for measuring | |
| All Metals | |
| Rough Surfaces | |
| Castings | |
| Billets | |
| Extruded Parts | |
| Weld Inspection | |
| Weld Inspection (Tight Areas) | |
| Immersion & Bubbler Inspections | |
| Suitable for | |
| BG80DL | |
| BG80TDL | |
| Part Number | TX5M00CM-8 |
| Probe Diameter | 1/4" |
| Element Type | Si/El Magnetic |
| Probe Characteristic | Standard |
| Connector Type | |
| Damping* | S |
| Potted | |
| Microdot | |
| Lemo | |
| Top | |
| Side | |
| End | |
| Suitable for measuring | |
| All Metals | |
| Rough Surfaces | |
| Castings | |
| Billets | |
| Extruded Parts | |
| Weld Inspection | |
| Weld Inspection (Tight Areas) | |
| Immersion & Bubbler Inspections | |
| Suitable for | |
| BG80DL | |
| BG80TDL | |
| Part Number | TX5M00DM |
| Probe Diameter | 3/8" |
| Element Type | Si/El Magnetic |
| Probe Characteristic | Standard |
| Connector Type | |
| Damping* | S |
| Potted | |
| Microdot | |
| Lemo | |
| Top | |
| Side | |
| End | |
| Suitable for measuring | |
| All Metals | |
| Rough Surfaces | |
| Castings | |
| Billets | |
| Extruded Parts | |
| Weld Inspection | |
| Weld Inspection (Tight Areas) | |
| Immersion & Bubbler Inspections | |
| Suitable for | |
| BG80DL | |
| BG80TDL | |
| Part Number | TX5M00GM |
| Probe Diameter | 3/4” |
| Element Type | Si/El Magnetic |
| Probe Characteristic | Standard |
| Connector Type | |
| Damping* | S |
| Potted | |
| Microdot | |
| Lemo | |
| Top | |
| Side | |
| End | |
| Suitable for measuring | |
| All Metals | |
| Rough Surfaces | |
| Castings | |
| Billets | |
| Extruded Parts | |
| Weld Inspection | |
| Weld Inspection (Tight Areas) | |
| Immersion & Bubbler Inspections | |
| Suitable for | |
| BG80DL | |
| BG80TDL | |
| Part Number | TX5M00EM-6 |
| Probe Diameter | 1/2" |
| Element Type | Si/El Non-Magnetic |
| Probe Characteristic | Standard |
| Connector Type | |
| Damping* | S |
| Potted | |
| Microdot | |
| Lemo | |
| Top | |
| Side | |
| End | |
| Suitable for measuring | |
| All Metals | |
| Rough Surfaces | |
| Castings | |
| Billets | |
| Extruded Parts | |
| Weld Inspection | |
| Weld Inspection (Tight Areas) | |
| Immersion & Bubbler Inspections | |
| Suitable for | |
| BG80DL | |
| BG80TDL | |
| Part Number | TX5M00EM-7 |
| Probe Diameter | 1/2" |
| Element Type | Si/El Magnetic |
| Probe Characteristic | Standard |
| Connector Type | |
| Damping* | S |
| Potted | |
| Microdot | |
| Lemo | |
| Top | |
| Side | |
| End | |
| Suitable for measuring | |
| All Metals | |
| Rough Surfaces | |
| Castings | |
| Billets | |
| Extruded Parts | |
| Weld Inspection | |
| Weld Inspection (Tight Areas) | |
| Immersion & Bubbler Inspections | |
| Suitable for | |
| BG80DL | |
| BG80TDL | |
| Elcometer 10.00MHz Bolt Tension Monitor Transducer | |
| Part Number | TX10M0AM-2 |
| Probe Diameter | 1/8" |
| Element Type | Si/El Non-Magnetic |
| Probe Characteristic | Standard |
| Connector Type | |
| Damping* | S |
| Potted | |
| Microdot | |
| Lemo | |
| Top | |
| Side | |
| End | |
| Suitable for measuring | |
| All Metals | |
| Rough Surfaces | |
| Castings | |
| Billets | |
| Extruded Parts | |
| Weld Inspection | |
| Weld Inspection (Tight Areas) | |
| Immersion & Bubbler Inspections | |
| Suitable for | |
| BG80DL | |
| BG80TDL | |
| Part Number | TX10M0AM-3 |
| Probe Diameter | 1/8" |
| Element Type | Si/El Magnetic |
| Probe Characteristic | Standard |
| Connector Type | |
| Damping* | S |
| Potted | |
| Microdot | |
| Lemo | |
| Top | |
| Side | |
| End | |
| Suitable for measuring | |
| All Metals | |
| Rough Surfaces | |
| Castings | |
| Billets | |
| Extruded Parts | |
| Weld Inspection | |
| Weld Inspection (Tight Areas) | |
| Immersion & Bubbler Inspections | |
| Suitable for | |
| BG80DL | |
| BG80TDL | |
| Part Number | TX10M0CM-5 |
| Probe Diameter | 1/4" |
| Element Type | Si/El Magnetic |
| Probe Characteristic | Standard |
| Connector Type | |
| Damping* | S |
| Potted | |
| Microdot | |
| Lemo | |
| Top | |
| Side | |
| End | |
| Suitable for measuring | |
| All Metals | |
| Rough Surfaces | |
| Castings | |
| Billets | |
| Extruded Parts | |
| Weld Inspection | |
| Weld Inspection (Tight Areas) | |
| Immersion & Bubbler Inspections | |
| Suitable for | |
| BG80DL | |
| BG80TDL | |
|
|
|||||||||||||||||||||||||||||
| Elcometer 2.25MHz Bolt Tension Monitor Transducer | ||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||
| Elcometer 5.00MHz Bolt Tension Monitor Transducer | ||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||
| Elcometer 10.00MHz Bolt Tension Monitor Transducer | ||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||
*S - Standard Undamped Transducer
Part Numbers
Elcometer Bolt Tension Monitor Transducers
-
Elcometer 2.25MHz 1/4" Bolt Tension Monitor Transducer
- Frequency: 2.25MHz
- Probe Diameter: 1/4"
- Element Type: Si/El Non-Magnetic
- Part Number : TX2M25CM-5
- Certification : No Certificate
-
Elcometer 2.25MHz 1/4" Bolt Tension Monitor Transducer
- Frequency: 2.25MHz
- Probe Diameter: 1/4"
- Element Type: Si/El Magnetic
- Part Number : TX2M25CM-6
- Certification : No Certificate
-
Elcometer 2.25MHz 3/8" Bolt Tension Monitor Transducer
- Frequency: 2.25MHz
- Probe Diameter: 3/8"
- Element Type: Si/El Magnetic
- Part Number : TX2M25DM
- Certification : No Certificate
-
Elcometer 2.25MHz 1/2" Bolt Tension Monitor Transducer
- Frequency: 2.25MHz
- Probe Diameter: 1/2"
- Element Type: Si/El Non-Magnetic
- Part Number : TX2M25EM-5
- Certification : No Certificate
-
Elcometer 2.25MHz 1/2" Bolt Tension Monitor Transducer
- Frequency: 2.25MHz
- Probe Diameter: 1/2"
- Element Type: Si/El Magnetic
- Part Number : TX2M25EM-6
- Certification : No Certificate
-
Elcometer 2.25MHz 3/4" Bolt Tension Monitor Transducer
- Frequency: 2.25MHz
- Probe Diameter: 3/4”
- Element Type: Si/El Magnetic
- Part Number : TX2M25GM
- Certification : No Certificate
-
Elcometer 5.00MHz 1/8" Bolt Tension Monitor Transducer
- Frequency: 5.00MHz
- Probe Diameter: 1/8"
- Element Type: Si/El Non-Magnetic
- Part Number : TX5M00AM-2
- Certification : No Certificate
-
Elcometer 5.00MHz 1/8" Bolt Tension Monitor Transducer
- Frequency: 5.00MHz
- Probe Diameter: 1/8"
- Element Type: Si/El Magnetic
- Part Number : TX5M00AM-3
- Certification : No Certificate
-
Elcometer 5.00MHz 1/4" Bolt Tension Monitor Transducer
- Frequency: 5.00MHz
- Probe Diameter: 1/4"
- Element Type: Si/El Non-Magnetic
- Part Number : TX5M00CM-7
- Certification : No Certificate
-
Elcometer 5.00MHz 1/4" Bolt Tension Monitor Transducer
- Frequency: 5.00MHz
- Probe Diameter: 1/4"
- Element Type: Si/El Magnetic
- Part Number : TX5M00CM-8
- Certification : No Certificate
-
Elcometer 5.00MHz 3/8" Bolt Tension Monitor Transducer
- Frequency: 5.00MHz
- Probe Diameter: 3/8"
- Element Type: Si/El Magnetic
- Part Number : TX5M00DM
- Certification : No Certificate
-
Elcometer 5.00MHz 1/2" Bolt Tension Monitor Transducer
- Frequency: 5.00MHz
- Probe Diameter: 1/2"
- Element Type: Si/El Magnetic
- Part Number : TX5M00EM-7
- Certification : No Certificate
-
Elcometer 5.00MHz 1/2" Bolt Tension Monitor Transducer
- Frequency: 5.00MHz
- Probe Diameter: 1/2"
- Element Type: Si/El Non-Magnetic
- Part Number : TX5M00EM-6
- Certification : No Certificate
-
Elcometer 5.00MHz 3/4" Bolt Tension Montor Transducer
- Frequency: 5.00MHz
- Probe Diameter: 3/4”
- Element Type: Si/El Magnetic
- Part Number : TX5M00GM
- Certification : No Certificate
-
Elcometer 10.00MHz 1/8" Bolt Tension Monitor Transducers
- Frequency: 10.00MHz
- Probe Diameter: 1/8"
- Element Type: Si/El Non-Magnetic
- Part Number : TX10M0AM-2
- Certification : No Certificate
-
Elcometer 10.00MHz 1/8" Bolt Tension Monitor Transducers
- Frequency: 10.00MHz
- Probe Diameter: 1/8"
- Element Type: Si/El Magnetic
- Part Number : TX10M0AM-3
- Certification : No Certificate
-
Elcometer 10.00MHz 1/4" Bolt Tension Monitor Transducers
- Frequency: 10.00MHz
- Probe Diameter: 1/4"
- Element Type: Si/El Non-Magnetic
- Part Number : TX10M0CM-4
- Certification : No Certificate
-
Elcometer 10.00MHz 1/4" Bolt Tension Monitor Transducers
- Frequency: 10.00MHz
- Probe Diameter: 1/4"
- Element Type: Si/El Magnetic
- Part Number : TX10M0CM-5
- Certification : No Certificate
-
Calibration Bar 3" 4140
- Part Number : TW-24029-S1
- Uncertified No Certification
-
Calibration Bar, 3” and 6”, Steel 4140
- Part Number : TW-24029-S2
- Uncertified No Certification