Elcometer 7000 Digital Moisture Meter
- Protective Coatings
- Industrial Finishing
The Elcometer 7000 Digital Moisture Meter range offers accurate and easy to use moisture measurement.
- Summary
-
Summary
-
Available in two versions, the Concrete Moisture Meter has a non-invasive probe that emits a radio frequency to penetrate the surface to detect moisture. Ideal for rapid surveys of solid wall, floors and ceramic tiles.
The Digital Moisture Meter has two pin probes that allow the gauge to be pressed on to a surface and take a measurement of the immediate area and also has a non-invasive probe on the back of the gauge for moisture detection.
- Calibrated ready for use
- Instant readings on a clear, easy to read scale
- Fully portable and battery operated
-
- Key Features
-
Key Features
Elcometer 7000 Digital Moisture Meter
Types of Moisture Meters
On porous materials such as concrete, plaster, brick, wood, the moisture content of the substrate should be measured, as the presence of moisture within a material will result in poor adhesion, premature coating failure and poor appearance.
It is not sufficient to simply ensure that the surface is dry as often the surface of the substrate is the driest point – due to evaporation. It is important to establish the moisture content within the substrate itself.
When powder coating wooden panels, for example, if the wood (or mdf) has too high a moisture content, as the panel passes through the oven, the moisture is heated, generating steam – causing significant coating finish issues.
Applying a coating to a concrete floor which is too damp can cause premature adhesion failure. Moisture meters have been developed to specifically determine the level of moisture in a substrate and come in two forms:
Pin-type moisture meters: Invasive pins are pushed firmly into the surface of the substrate being measured and measuring the electrical resistance between the pin electrodes provide the percentage moisture content (%MC) in the substrate.
Pinless, contact-type moisture meters: Whilst pinless meters typically measure moisture content faster and are non-destructive they do require a relatively flat surface because the sensors are mounted on the base of the gauge making them ideal for concrete.
-
- Technical Information
-
Technical SpecificationElcometer 7000 Digital Moisture Meter
Model Elcometer 7000S Concrete Moisture Meter Elcometer 7000PS Digital Moisture Meter Certificate Part Number G7000S G7000PS 
Measuring Range 70 to 999 relative (non-invasive)
Dry (green); 70 – 169
At risk (yellow); 170 – 199
Wet (red); 200 - 99970 to 999 relative (non-invasive)
Dry (green); 70 - 169
At risk (yellow); 170 - 199
Wet (red); 200 - 999
7.9% to 99% WME (pin measurement)
Dry (green); 7 - 16.9
At Risk (yellow); 17 - 19.9
Wet (red); 20 - 99.9Measurement Depth Non-invasive up to 19mm (¾") Non-invasive up to 19mm (¾")
Pin up to 12.7mm (½")Display LCD Display with separate colour indicators LCD Display with separate colour indicators Dimensions 175 x 48 x 50mm (7.0 x 1.9 x 2.0") 190 x 70 x 49mm (7.5 x 2.75 x 1.9") Weight 195g (7oz) 225g (8oz) Power Supply 9V battery (~ 20 hours continuous use) Packing List Elcometer 7000 Moisture Meter, HD MC probe (Model PS), Deep Wall probe 127mm (5") (Model PS), pin calibration check (Model PS), wood calibration chart (Model PS), battery, carry case and operating instructions Model Elcometer 7000S Concrete Moisture Meter Part Number G7000S Certificate Measuring Range 70 to 999 relative (non-invasive)
Dry (green); 70 – 169
At risk (yellow); 170 – 199
Wet (red); 200 - 999Measurement Depth Non-invasive up to 19mm (¾") Display LCD Display with separate colour indicators Dimensions 175 x 48 x 50mm (7.0 x 1.9 x 2.0") Weight 195g (7oz) Model Elcometer 7000PS Digital Moisture Meter Part Number G7000PS Certificate Measuring Range 70 to 999 relative (non-invasive)
Dry (green); 70 - 169
At risk (yellow); 170 - 199
Wet (red); 200 - 999
7.9% to 99% WME (pin measurement)
Dry (green); 7 - 16.9
At Risk (yellow); 17 - 19.9
Wet (red); 20 - 99.9Measurement Depth Non-invasive up to 19mm (¾")
Pin up to 12.7mm (½")Display LCD Display with separate colour indicators Dimensions 190 x 70 x 49mm (7.5 x 2.75 x 1.9") Weight 225g (8oz) Power Supply 9V battery (~ 20 hours continuous use) Packing List Elcometer 7000 Moisture Meter, HD MC probe (Model PS), Deep Wall probe 127mm (5") (Model PS), pin calibration check (Model PS), wood calibration chart (Model PS), battery, carry case and operating instructions ○ Optional Calibration Certificate available for Elcometer 7000PS Digital Mositure Meter only
-
- Downloads
-
Downloads
-
Elcometer 7000 Digital Moisture Meters Wood Moisture Equivalence Table
-
Elcometer 7000 Digital Moisture Meters Datasheet
- Part Numbers
-
Part NumbersElcometer 7000 Digital Moisture Meter
-
Elcometer 7000PS Digital Moisture MeterTwo pin probes allow the gauge to be pressed on to a surface and take a measurement of the immediate area and also has a non-invasive probe on the back of the gauge for moisture detection.
- Part Number : G7000PS
- Certification : No Certificate
- Part Number : G7000PSC
- Certification : Calibration Certificate
-
Elcometer 7000S Concrete Moisture MeterNon-invasive probe that emits a radio frequency to penetrate the surface to detect moisture. Ideal for rapid surveys of solid wall, floors and ceramic tiles.
- Part Number : G7000S
- Certification : No Certificate
Elcometer 7000 Digital Moisture Meter
- Protective Coatings
- Industrial Finishing
The Elcometer 7000 Digital Moisture Meter range offers accurate and easy to use moisture measurement.
Summary
Elcometer 7000 Digital Moisture Meter
Available in two versions, the Concrete Moisture Meter has a non-invasive probe that emits a radio frequency to penetrate the surface to detect moisture. Ideal for rapid surveys of solid wall, floors and ceramic tiles.
The Digital Moisture Meter has two pin probes that allow the gauge to be pressed on to a surface and take a measurement of the immediate area and also has a non-invasive probe on the back of the gauge for moisture detection.
- Calibrated ready for use
- Instant readings on a clear, easy to read scale
- Fully portable and battery operated
Downloads-
Elcometer 7000 Digital Moisture Meters Wood Moisture Equivalence Table
-
Elcometer 7000 Digital Moisture Meters Datasheet
Key Features
Elcometer 7000 Digital Moisture Meter
Types of Moisture Meters
On porous materials such as concrete, plaster, brick, wood, the moisture content of the substrate should be measured, as the presence of moisture within a material will result in poor adhesion, premature coating failure and poor appearance.
It is not sufficient to simply ensure that the surface is dry as often the surface of the substrate is the driest point – due to evaporation. It is important to establish the moisture content within the substrate itself.
When powder coating wooden panels, for example, if the wood (or mdf) has too high a moisture content, as the panel passes through the oven, the moisture is heated, generating steam – causing significant coating finish issues.
Applying a coating to a concrete floor which is too damp can cause premature adhesion failure. Moisture meters have been developed to specifically determine the level of moisture in a substrate and come in two forms:
Pin-type moisture meters: Invasive pins are pushed firmly into the surface of the substrate being measured and measuring the electrical resistance between the pin electrodes provide the percentage moisture content (%MC) in the substrate.
Pinless, contact-type moisture meters: Whilst pinless meters typically measure moisture content faster and are non-destructive they do require a relatively flat surface because the sensors are mounted on the base of the gauge making them ideal for concrete.
Technical SpecificationElcometer 7000 Digital Moisture MeterModel Elcometer 7000S Concrete Moisture Meter Elcometer 7000PS Digital Moisture Meter Certificate Part Number G7000S G7000PS Measuring Range 70 to 999 relative (non-invasive)
Dry (green); 70 – 169
At risk (yellow); 170 – 199
Wet (red); 200 - 99970 to 999 relative (non-invasive)
Dry (green); 70 - 169
At risk (yellow); 170 - 199
Wet (red); 200 - 999
7.9% to 99% WME (pin measurement)
Dry (green); 7 - 16.9
At Risk (yellow); 17 - 19.9
Wet (red); 20 - 99.9Measurement Depth Non-invasive up to 19mm (¾") Non-invasive up to 19mm (¾")
Pin up to 12.7mm (½")Display LCD Display with separate colour indicators LCD Display with separate colour indicators Dimensions 175 x 48 x 50mm (7.0 x 1.9 x 2.0") 190 x 70 x 49mm (7.5 x 2.75 x 1.9") Weight 195g (7oz) 225g (8oz) Power Supply 9V battery (~ 20 hours continuous use) Packing List Elcometer 7000 Moisture Meter, HD MC probe (Model PS), Deep Wall probe 127mm (5") (Model PS), pin calibration check (Model PS), wood calibration chart (Model PS), battery, carry case and operating instructions Model Elcometer 7000S Concrete Moisture Meter Part Number G7000S Certificate Measuring Range 70 to 999 relative (non-invasive)
Dry (green); 70 – 169
At risk (yellow); 170 – 199
Wet (red); 200 - 999Measurement Depth Non-invasive up to 19mm (¾") Display LCD Display with separate colour indicators Dimensions 175 x 48 x 50mm (7.0 x 1.9 x 2.0") Weight 195g (7oz) Model Elcometer 7000PS Digital Moisture Meter Part Number G7000PS Certificate Measuring Range 70 to 999 relative (non-invasive)
Dry (green); 70 - 169
At risk (yellow); 170 - 199
Wet (red); 200 - 999
7.9% to 99% WME (pin measurement)
Dry (green); 7 - 16.9
At Risk (yellow); 17 - 19.9
Wet (red); 20 - 99.9Measurement Depth Non-invasive up to 19mm (¾")
Pin up to 12.7mm (½")Display LCD Display with separate colour indicators Dimensions 190 x 70 x 49mm (7.5 x 2.75 x 1.9") Weight 225g (8oz) Power Supply 9V battery (~ 20 hours continuous use) Packing List Elcometer 7000 Moisture Meter, HD MC probe (Model PS), Deep Wall probe 127mm (5") (Model PS), pin calibration check (Model PS), wood calibration chart (Model PS), battery, carry case and operating instructions ○ Optional Calibration Certificate available for Elcometer 7000PS Digital Mositure Meter onlyPart NumbersElcometer 7000 Digital Moisture Meter-
Elcometer 7000PS Digital Moisture Meter
Two pin probes allow the gauge to be pressed on to a surface and take a measurement of the immediate area and also has a non-invasive probe on the back of the gauge for moisture detection.
- Part Number : G7000PS
- Certification : No Certificate
- Part Number : G7000PSC
- Certification : Calibration Certificate
-
Elcometer 7000S Concrete Moisture Meter
Non-invasive probe that emits a radio frequency to penetrate the surface to detect moisture. Ideal for rapid surveys of solid wall, floors and ceramic tiles.
- Part Number : G7000S
- Certification : No Certificate
-
-
-