Elcometer 5100 Payne Permeability Cup
- Industrial Finishing
- Paint Manufacture
- Laboratory & Physical Test
The Elcometer 5100 Payne Permeability Cups are made of anodised aluminium and are used to determine the permeability of films of paints, varnish, plastic, cellophane, etc.
- Summary
-
Summary
-
The water evaporates or is absorbed by the cups and, after a certain time, the weight change relative to the film thickness is calculated, indicating the degree of permeability or permeance.
-
- Key Features
-
Key Features
Elcometer 5100 Payne Permeability Cup
How to use Payne Permeability Cups
Prepare the film to be tested using a film applicator and suitable test chart.
Disassemble the permeability cup.
Fill with required liquid (typically water) or dry desiccant (absorbent).
Place the film on to the cup and reassemble making sure the gasket is fitted.
Weigh the prepared permeability cup and record the result (in grams).
Leave for appropriate time, re-weigh, calculate the change in mass (∆m) & water vapour transmission rate.
-
- Technical Information
-
- Standards
-
StandardsElcometer 5100 Payne Permeability Cup
ASTM D1653, ASTM E96, ISO 7783-1, ISO 7783-2
-
- Downloads
-
Downloads
-
Elcometer 5100 Payne Permeability Cups Instruction Manual
-
Elcometer 5100 Payne Permeability Cups Datasheet
- Part Numbers
-
Part NumbersElcometer 5100 Payne Permeability Cup
-
Elcometer 5100/1 Payne Permeability CupThe Elcometer 5100/1 Payne Permeability Cup has an area of 10cm2 (1.55 inches2) and a volume of 15cm3 (0.91 inches3).
- Part Number : K0005100M201
- Certification : No Certificate
-
Elcometer 5100/2 Payne Permeability CupThe Elcometer 5100/2 Payne Permeability Cup has an area of 30cm2 (4.65 inches2) and a volume of 50cm3 (3.05 inches3).
- Part Number : K0005100M202
- Certification : No Certificate
-
Elcometer 5100/3 Payne Permeability CupThe Elcometer 5100/3 Payne Permeability Cup has an area of 30cm2 (4.65 inches2) and a volume of 75cm3 (4.58 inches3).
- Part Number : K0005100M203
- Certification : No Certificate
- Accessories
-
AccessoriesElcometer 5100 Payne Permeability Cup
Part NumberK0004695M112
-
Elcometer 5100 Payne Permeability Cup
- Industrial Finishing
- Paint Manufacture
- Laboratory & Physical Test
The Elcometer 5100 Payne Permeability Cups are made of anodised aluminium and are used to determine the permeability of films of paints, varnish, plastic, cellophane, etc.
Summary
Elcometer 5100 Payne Permeability Cup
The water evaporates or is absorbed by the cups and, after a certain time, the weight change relative to the film thickness is calculated, indicating the degree of permeability or permeance.
Downloads-
Elcometer 5100 Payne Permeability Cups Instruction Manual
-
Elcometer 5100 Payne Permeability Cups Datasheet
Key Features
Elcometer 5100 Payne Permeability Cup
How to use Payne Permeability Cups
Prepare the film to be tested using a film applicator and suitable test chart. Disassemble the permeability cup.
Fill with required liquid (typically water) or dry desiccant (absorbent).Place the film on to the cup and reassemble making sure the gasket is fitted.Weigh the prepared permeability cup and record the result (in grams).Leave for appropriate time, re-weigh, calculate the change in mass (∆m) & water vapour transmission rate.Part NumbersElcometer 5100 Payne Permeability Cup-
Elcometer 5100/1 Payne Permeability Cup
The Elcometer 5100/1 Payne Permeability Cup has an area of 10cm2 (1.55 inches2) and a volume of 15cm3 (0.91 inches3).
- Part Number : K0005100M201
- Certification : No Certificate
-
Elcometer 5100/2 Payne Permeability Cup
The Elcometer 5100/2 Payne Permeability Cup has an area of 30cm2 (4.65 inches2) and a volume of 50cm3 (3.05 inches3).
- Part Number : K0005100M202
- Certification : No Certificate
-
Elcometer 5100/3 Payne Permeability Cup
The Elcometer 5100/3 Payne Permeability Cup has an area of 30cm2 (4.65 inches2) and a volume of 75cm3 (4.58 inches3).
- Part Number : K0005100M203
- Certification : No Certificate
AccessoriesElcometer 5100 Payne Permeability Cup-
Part Number: K0004695M112
-
-