Elcometer 456 Coating Thickness Gauge Probe Range

Protective Coatings
Industrial Finishing

All Elcometer 456 Coating Thickness Gauge probes are fully interchangeable and are available in a number of designs and scale ranges to meet your specific application.

Summary
- Summary
- Ferrous Probes (F)
  Ferrous probes measure non-magnetic coatings on ferromagnetic substrates
  
  Elcometer 456 ferrous gauges accept any ferrous probe
  Non-Ferrous Probes (N)
  Non-ferrous probes measure non-conductive coatings on non-ferrous metal substrates
  
  Elcometer 456 non-ferrous gauges accept any non-ferrous probe
  Dual Probes (FNF)
  Dual FNF probes measure both ferrous and non-ferrous applications with automatic substrate detection
  
  Elcometer 456 FNF gauges accept all ferrous, non-ferrous and dual FNF probes
  High Temperature
  Elcometer probes have a maximum operating temperature of 80°C (176°F)*
  
  Separate ferrous probes have a maximum operating temperature of 150°C (300°F)*
  
  Hi-Temperature PINIP™ has a maximum operating temperature of 250°C (480°F)*
  
  *The stated temperature is the substrate temperature, and the duty cycle of the probe must be reduced to ensure a minimal temperature build-up within the probe.
  Ferrous coating thickness gauge probes measure non magnetic coatings on ferro-magnetic substrates. Elcometer 456 coating thickness ferrous gauges accept any ferrous probe.
  Non-ferrous coating thickness gauge probes measure non conductive coatings on non-ferrous metal substrates and Elcometer 456 non-ferrous gauges accept any non-ferrous probe.
  Dual FNF probes measure both ferrous and non-ferrous applications with automatic substrate detection. Elcometer 456 FNF coating thickness gauges accept all ferrous, non-ferrous and dual FNF probes.
Key Features
- Key Features
  
  Elcometer 456 Coating Thickness Gauge Probe Range
  
  Straight Probes
  Standard Straight Probe
  Standard probes measure coatings on both flat and curved surfaces.
  Anodising Probe
  Chemical resistant & washable - ideal for the anodising environment.
  Mini Probe
  Mini probes are ideal for harder to reach areas and edges.
  Waterproof Probe
  Sealed for use underwater at depth, even in diving gloves.
  Soft Coating Probe
  Large surface area probes are for soft materials (HVCA approved).
  Thick Coatings Probe
  Ideal for measuring coatings up to 31mm thick.
  Scan Probes
  Standard Scan Probe
  Rapidly scan large surface areas without damaging the probe or the coating.
  Ball Bearing Scan Probe*
  Clip on adaptors for large coated structures, abrasive coatings and pre-construction primers.
  Angled Probes
  Right Angle Probe
  Take readings in areas with restricted clearance.
  Mini Right Angle Probe
  For measuring coatings on edges, narrow pipes or small surface areas.
  Telescopic Probe
  Extending probes for hard to reach areas.
  45° Angle Probe
  Measure difficult to access or complex areas.
  Plug In Integral Probes (PINIP™)
  PINIP™ Integral Probe
  Transforms a separate gauge into an integral gauge, ideal for single-handed use.
  Hi-Temperature PINIP™
  Measure coatings on ferrous substrates up to 250°C (480°F).
  Armoured Cable Probes
  F / FNF Armoured Probe
  Reinforced heavy duty cables reduce the risk of cable damage.
  *UK Patent Number: 2571577

Technical Information

Technical Specification

Elcometer 456 Coating Thickness Gauge Probe Range

Scale 0.5: Range : 0-500μm (0-20mils)
Accuracy^a	(±1-3% or ±0.1mil)
Range	0-500μm (0-20mils)
Resolution	0.1μm: 0-100μm (0.01mil: 0-5mils) 1μm: 100-500μm (0.1mil: 5-20mils)
Certificate
Description	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Minimum Convex Surface Diameter	Minimum Concave Surface Radius
Ferrous (F)
Straight Mini Probe Probe Length: 45mm (1.77”)^c	T456CFM3---A	6mm (0.24”)	3mm (0.12”)	1.9mm (0.07")	6.5mm (0.26")
Right Angle Mini Probe Probe Length: 45mm (1.77”)^c	T456CFM3R90A	16mm (0.63”)	3mm (0.12”)	1.9mm (0.07")	6.5mm (0.26")
45° Angle Mini Probe Probe Length: 45mm (1.77”)^c	T456CFM3R45A	16mm (0.63”)	3mm (0.12”)	1.9mm (0.07")	6.5mm (0.26")
Straight Mini Probe Probe Length: 150mm (5.90”)^c	T456CFM3---C	6mm (0.24”)	3mm (0.12”)	1.9mm (0.07")	6.5mm (0.26")
Right Angle Mini Probe Probe Length: 150mm (5.90”)^c	T456CFM3R90C	16mm (0.63”)	3mm (0.12”)	1.9mm (0.07")	6.5mm (0.26")
45° Angle Mini Probe Probe Length: 300mm (11.80”)^c	T456CFM3R45D	18mm (0.71”)	3mm (0.12”)	1.9mm (0.07")	6.5mm (0.26")
Right Angle Mini Probe Probe Length: 300mm (11.80”)^c	T456CFM3R90D	16mm (0.63”)	3mm (0.12”)	1.9mm (0.07")	6.5mm (0.26")

Non-Ferrous (N)
Straight Mini Probe Probe Length: 45mm (1.77”)^c	T456CNM3---A	6mm (0.24”)	4mm (0.16”)	6mm (0.24")	8.5mm (0.33")
Right Angle Mini Probe Probe Length: 45mm (1.77”)^c	T456CNM3R90A	16mm (0.63”)	4mm (0.16”)	6mm (0.24")	8.5mm (0.33")
Straight Mini Probe Probe Length: 150mm (5.90”)^c	T456CNM3---C	6mm (0.24”)	4mm (0.16”)	6mm (0.24")	8.5mm (0.33")
Right Angle Mini Probe Probe Length: 150mm (5.90”)^c	T456CNM3R90C	16mm (0.63”)	4mm (0.16”)	6mm (0.24")	8.5mm (0.33")
Right Angle Mini Probe Probe Length: 400mm (15.70”)^c	T456CNM3R90E	16mm (0.63”)	4mm (0.16”)	6mm (0.24")	8.5mm (0.33")

Non-Ferrous - Graphite (N)
Right Angle Mini Probe Probe Length: 45mm (1.77”)^c	T456CNMG3R90A	16mm (0.63”)	4mm (0.16”)	6mm (0.24")	8.5mm (0.33")
Right Angle Mini Probe Probe Length: 150mm (5.90”)^c	T456CNMG3R90C	16mm (0.63”)	4mm (0.16”)	6mm (0.24")	8.5mm (0.33")
Right Angle Mini Probe Probe Length: 400mm (15.70”)^c	T456CNMG3R90E	16mm (0.63”)	4mm (0.16”)	6mm (0.24")	8.5mm (0.33")

Scale 1: Range : 0-1500μm (0-60mils)
Accuracy^ae	±1-3% or ±2.5μm (±1-3% or ±0.1mil)
Range^d	0-1500μm (0-60mils)
Resolution	0.1μm: 0-100μm (0.01mil: 0-5mils) 1μm: 100-1500μm (0.1mil: 5-60mils)
Certificate
Description	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Minimum Convex Surface Diameter	Minimum Concave Surface Radius
Ferrous (F)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CF1S	85mm (3.35”)	4mm (0.16”)	4mm (0.16")	25mm (0.98")
Straight Probe - sealed Probe Length: 45mm (1.77”)^c	T456CF1E	85mm (3.35”)	4mm (0.16”)	4mm (0.16")	25mm (0.98")
Scan Probe Probe Length: 45mm (1.77”)^c	T456CF1U	86mm (3.38”)	15mm (0.59”)	Flat Surface	Flat Surface
Scan Probe - armoured Probe Length: 45mm (1.77”)^c	T456CF1UARM	140mm (5.51”)	15mm (0.59”)	Flat Surface	Flat Surface
90° Probe Probe Length: 45mm (1.77”)^c	T456CF1R	28mm (1.10”)	4mm (0.16”)	4mm (0.16")	25mm (0.98")
90° Mini Probe Probe Length: 45mm (1.77”)^c	T456CFM5R90A	16mm (0.63”)	4mm (0.16”)	3mm (0.12")	6.5mm (0.26")
90° Mini Probe - sealed Probe Length: 45mm (1.77”)^c	T456CFME5R90A	16mm (0.63”)	4mm (0.16”)	3mm (0.12")	6.5mm (0.26")
90° Mini Probe - sealed, 2m cable Probe Length: 45mm (1.77”)^c	T456CFME5R90A-2	16mm (0.63”)	4mm (0.16”)	3mm (0.12")	6.5mm (0.26")
PINIP™ Integral Probe	T456CF1P	170mm (6.69”)	4mm (0.16”)	4mm (0.16")	60mm (2.36")

Non-Ferrous (N)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CN1S	85mm (3.35”)	4mm (0.16”)	10mm (0.39")	10mm (0.39")
90° Probe Probe Length: 45mm (1.77”)^c	T456CN1R	28mm (1.10”)	4mm (0.16”)	10mm (0.39")	14mm (0.55")
Mini 90° Probe Probe Length: 45mm (1.77”)^c	T456CNM5R90A	16mm (0.63”)	4mm (0.16”)	10mm (0.39")	8.5mm (0.33")
Mini 90°Probe Probe Length: 150mm (5.90”)^c	T456CNM5R90C	16mm (0.63”)	4mm (0.16”)	10mm (0.39")	8.5mm (0.33")
Mini 90° Probe Probe Length: 400mm (15.7”)^c	T456CNM5R90E	16mm (0.63”)	4mm (0.16”)	10mm (0.39")	8.5mm (0.33")
Anodiser Probe Probe Length: 45mm (1.77”)^c	T456CN1AS	100mm (3.94”)	4mm (0.16”)	10mm (0.39")	14mm (0.55")
PINIP™ Integral Probe	T456CN1P	180mm (7.09”)	4mm (0.16”)	10mm (0.39")	50mm (1.97")

Ferrous & Non-Ferrous (FNF)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CFNF1S	88mm (3.46”)	F: 4mm (0.16”), N: 6mm (0.24”)	F: 4mm (0.16") N: 26mm (1.02")	12.5mm (0.49")
Straight Probe - armoured cable Probe Length: 45mm (1.77”)^c	T456CFNF1ARM	185mm (7.28")	F: 4mm (0.16”), N: 6mm (0.24”)	F: 4mm (0.16") N: 26mm (1.02")	12.5mm (0.49")
Scan Probe Probe Length: 45mm (1.77”)^c	T456CFNF1U	89mm (3.50”)	15mm (0.59”)	Flat Surface	Flat Surface
Right Angle Probe Probe Length: 45mm (1.77”)^c	T456CFNF1R	38mm (1.50”)	F: 4mm (0.16”), N: 6mm (0.24”)	F: 4mm (0.16") N: 26mm (1.02")	12.5mm (0.49")
PINIP™ Integral Probe	T456CFNF1P	180mm (7.09”)	F: 4mm (0.16”), N: 6mm (0.24”)	F: 4mm (0.16") N: 26mm (1.02")	65mm (2.56")

Scale 2: Range : 0-5mm (0-200mils)
Accuracy^ae	±1-3% or ±20μm (±1-3% or ±1.0mil)
Range^d	0-5mm (0-200mils)
Resolution	1μm: 0-1mm (0.1mil: 0-50mils) 10μm: 1-5mm (1.0mil: 50-200mils)
Certificate
Description	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Minimum Convex Surface Diameter	Minimum Concave Surface Radius
Ferrous (F)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CF2S	89mm (3.50”)	8mm (0.32”)	4mm (0.16")	25mm (0.98")
Scan Probe Probe Length: 45mm (1.77”)^c	T456CF2U	90mm (3.54”)	15mm (0.59”)	Flat Surface	Flat Surface
90° Probe Probe Length: 45mm (1.77”)^c	T456CF2R	32mm (1.26”)	8mm (0.32”)	4mm (0.16")	25mm (0.98")
Straight Probe - armoured cable Probe Length: 45mm (1.77”)^c	T456CF2ARM	138mm (5.43”)	8mm (0.32”)	4mm (0.16")	25mm (0.98")
Telescopic Probe Probe Length: 56-122cm (22-48”)^c	T456CF2T	36mm (1.42”)	8mm (0.32”)	4mm (0.16")	25mm (0.98")
Soft Coating Probe Probe Length: 45mm (1.77”)^c	T456CF2B	89mm (3.50”)	8mm (0.32”)	Flat Surface	Flat Surface
Waterproof Probe - 1m (3’) cable Probe Length: 45mm (1.77”)^c	T456CF2SW	138mm (5.43”)	8mm (0.32”)	4mm (0.16")	40mm (1.98")
Waterproof Probe - 5m (15’) cable Probe Length: 45mm (1.77”)^c	T456CF2SW-5	138mm (5.43”)	8mm (0.32”)	4mm (0.16")	40mm (1.98")
Waterproof Probe - 15m (45’) cable Probe Length: 45mm (1.77”)^c	T456CF2SW-15	138mm (5.43”)	8mm (0.32”)	4mm (0.16")	40mm (1.98")
Waterproof Probe - 30m (98’) cable Probe Length: 45mm (1.77”)^c	T456CF2SW-30	138mm (5.43”)	8mm (0.32”)	4mm (0.16")	40mm (1.98")
Waterproof Probe - 50m (164’) cable Probe Length: 45mm (1.77”)^c	T456CF2SW-50	138mm (5.43”)	8mm (0.32”)	4mm (0.16")	40mm (1.98")
Waterproof Probe - 75m (250’) cable Probe Length: 45mm (1.77”)^c	T456CF2SW-75	138mm (5.43”)	8mm (0.32”)	4mm (0.16")	40mm (1.98")
PINIP™ Integral Probe	T456CF2P	174mm (6.85”)	8mm (0.32”)	4mm (0.16")	60mm (2.36")
Hi-Temperature PINIP™	T456CF2PHT	174mm (6.85”)	8mm (0.32”)	4mm (0.16")	60mm (2.36")

Non-Ferrous (N)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CN2S	88mm (3.46”)	14mm (0.55”)	100mm (3.97")	150mm (5.90")
PINIP™ Integral Probe	T456CN2P	185mm (7.28")	14mm (0.55”)	100mm (3.97")	150mm (5.90")

Scale 3: Range : 0-13mm (0-500mils)
Accuracy^a	±1-3% or ±50μm (±1-3% or ±2.0mils)
Range^d	0-13mm (0-500mils)
Resolution	1μm: 0-2mm (0.1mil: 0-100mils) 10μm: 2-13mm (1.0mil: 100-500mils)
Certificate
Description	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Minimum Convex Surface Diameter	Minimum Concave Surface Radius
Ferrous (F)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CF3S	102mm (4.02”)	14mm (0.55”)	15mm (0.59")	40mm (1.98")
PINIP™ Integral Probe	T456CF3P	184mm (7.24”)	14mm (0.55”)	15mm (0.59")	45mm (1.77")

Non-Ferrous (N)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CN3S	170mm (6.69”)	35mm (1.38”)	Flat Surface	Flat Surface

Scale FM7: Range: 0.60-3.8mm (25-150mils)
Accuracy^a	±7.5% or ±114μm (±7.5% or ±4.5mils)
Range^d	0.60-3.8mm (25-150mils)
Resolution	1μm: 0-1mm (0.1mil: 0-139.3mils) 10μm: 1-3.8mm (1.0mil: 39.4-150mils)
Certificate
Description	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Minimum Convex Surface Diameter	Minimum Concave Surface Radius
Ferrous (F)
45° Angle Mini Probe Probe Length: 45mm (1.77”)^c	T456CFM7R45A	20mm (0.79”)	6.5 mm (0.26’’)	-	-

Scale 6: Range : F: 0-25mm (F: 0-980mils) N: 0-30mm (N: 0-1200mils)
Accuracy^a	±1-3% or ±100μm (±1-3% or ±4.0mils)
Range^d	F: 0-25mm (F: 0-980mils) N: 0-30mm (N: 0-1200mils)
Resolution	10μm: 0-2mm (1mil: 0-100mils) 100μm: 2-30mm (10mils: 100-1200mils)
Certificate
Description	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Minimum Convex Surface Diameter	Minimum Concave Surface Radius
Ferrous (F)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CF6S	150mm (5.90”)	51 x 51mm2 (2.17 x 2.17 inch2)	35mm (1.40")	170mm (6.70")
Straight Probe - armoured cable Probe Length: 45mm (1.77”)^c	T456CF6ARM	190mm (7.48”)	51 x 51mm2 (2.17 x 2.17 inch2)	35mm (1.40")	170mm (6.70")

Non-Ferrous (N)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CN6S	160mm (6.30”)	58mm (2.29”)	Flat Surface	Flat Surface
Straight Probe - armoured cable Probe Length: 45mm (1.77”)^c	T456CN6ARM	200mm (7.87")	58mm (2.29”)	Flat Surface	Flat Surface

Scale 7: Range : 0-31mm (0-1220mils)
Accuracy^a	±1-3% or ±100μm (±1-3% or ±4.0mils)
Range^d	0-31mm (0-1220mils)
Resolution	10μm: 0-2mm (1.0mil: 0-100mils) 100μm: 2-31mm (10mils: 100-1220mils)
Certificate
Description	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Minimum Convex Surface Diameter	Minimum Concave Surface Radius
Ferrous (F)
Straight Probe armoured cable Probe Length: 45mm (1.77”)^c	T456CF7ARM	200mm (7.87")	55 x 55mm² (2.17 x 2.17 inch²)	40mm (1.58")	170mm (6.70")

Scale 0.5: Range : 0-500μm (0-20mils)
Accuracy^a	(±1-3% or ±0.1mil)
Range	0-500μm (0-20mils)
Resolution	0.1μm: 0-100μm (0.01mil: 0-5mils) 1μm: 100-500μm (0.1mil: 5-20mils)
Certificate
Ferrous (F)
Part Number	T456CFM3---A
Description	Straight Mini Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	6mm (0.24”)
Minimum Sample Diameter^b	3mm (0.12”)
Minimum Convex Surface Diameter	1.9mm (0.07")
Minimum Concave Surface Radius	6.5mm (0.26")
Part Number	T456CFM3R90A
Description	Right Angle Mini Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	3mm (0.12”)
Minimum Convex Surface Diameter	1.9mm (0.07")
Minimum Concave Surface Radius	6.5mm (0.26")
Part Number	T456CFM3R45A
Description	45° Angle Mini Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	3mm (0.12”)
Minimum Convex Surface Diameter	1.9mm (0.07")
Minimum Concave Surface Radius	6.5mm (0.26")
Part Number	T456CFM3---C
Description	Straight Mini Probe Probe Length: 150mm (5.90”)^c
Minimum Headroom	6mm (0.24”)
Minimum Sample Diameter^b	3mm (0.12”)
Minimum Convex Surface Diameter	1.9mm (0.07")
Minimum Concave Surface Radius	6.5mm (0.26")
Part Number	T456CFM3R90C
Description	Right Angle Mini Probe Probe Length: 150mm (5.90”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	3mm (0.12”)
Minimum Convex Surface Diameter	1.9mm (0.07")
Minimum Concave Surface Radius	6.5mm (0.26")
Part Number	T456CFM3R45D
Description	45° Angle Mini Probe Probe Length: 300mm (11.80”)^c
Minimum Headroom	18mm (0.71”)
Minimum Sample Diameter^b	3mm (0.12”)
Minimum Convex Surface Diameter	1.9mm (0.07")
Minimum Concave Surface Radius	6.5mm (0.26")
Part Number	T456CFM3R90D
Description	Right Angle Mini Probe Probe Length: 300mm (11.80”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	3mm (0.12”)
Minimum Convex Surface Diameter	1.9mm (0.07")
Minimum Concave Surface Radius	6.5mm (0.26")

Non-Ferrous (N)
Part Number	T456CNM3---A
Description	Straight Mini Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	6mm (0.24”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	6mm (0.24")
Minimum Concave Surface Radius	8.5mm (0.33")
Part Number	T456CNM3R90A
Description	Right Angle Mini Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	6mm (0.24")
Minimum Concave Surface Radius	8.5mm (0.33")
Part Number	T456CNM3---C
Description	Straight Mini Probe Probe Length: 150mm (5.90”)^c
Minimum Headroom	6mm (0.24”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	6mm (0.24")
Minimum Concave Surface Radius	8.5mm (0.33")
Part Number	T456CNM3R90C
Description	Right Angle Mini Probe Probe Length: 150mm (5.90”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	6mm (0.24")
Minimum Concave Surface Radius	8.5mm (0.33")
Part Number	T456CNM3R90E
Description	Right Angle Mini Probe Probe Length: 400mm (15.70”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	6mm (0.24")
Minimum Concave Surface Radius	8.5mm (0.33")

Non-Ferrous - Graphite (N)
Part Number	T456CNMG3R90A
Description	Right Angle Mini Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	6mm (0.24")
Minimum Concave Surface Radius	8.5mm (0.33")
Part Number	T456CNMG3R90C
Description	Right Angle Mini Probe Probe Length: 150mm (5.90”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	6mm (0.24")
Minimum Concave Surface Radius	8.5mm (0.33")
Part Number	T456CNMG3R90E
Description	Right Angle Mini Probe Probe Length: 400mm (15.70”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	6mm (0.24")
Minimum Concave Surface Radius	8.5mm (0.33")

Scale 1: Range : 0-1500μm (0-60mils)
Accuracy^ae	±1-3% or ±2.5μm (±1-3% or ±0.1mil)
Range^d	0-1500μm (0-60mils)
Resolution	0.1μm: 0-100μm (0.01mil: 0-5mils) 1μm: 100-1500μm (0.1mil: 5-60mils)
Certificate
Ferrous (F)
Part Number	T456CF1S
Description	Straight Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	85mm (3.35”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	25mm (0.98")
Part Number	T456CF1E
Description	Straight Probe - sealed Probe Length: 45mm (1.77”)^c
Minimum Headroom	85mm (3.35”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	25mm (0.98")
Part Number	T456CF1U
Description	Scan Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	86mm (3.38”)
Minimum Sample Diameter^b	15mm (0.59”)
Minimum Convex Surface Diameter	Flat Surface
Minimum Concave Surface Radius	Flat Surface
Part Number	T456CF1UARM
Description	Scan Probe - armoured Probe Length: 45mm (1.77”)^c
Minimum Headroom	140mm (5.51”)
Minimum Sample Diameter^b	15mm (0.59”)
Minimum Convex Surface Diameter	Flat Surface
Minimum Concave Surface Radius	Flat Surface
Part Number	T456CF1R
Description	90° Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	28mm (1.10”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	25mm (0.98")
Part Number	T456CFM5R90A
Description	90° Mini Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	3mm (0.12")
Minimum Concave Surface Radius	6.5mm (0.26")
Part Number	T456CFME5R90A
Description	90° Mini Probe - sealed Probe Length: 45mm (1.77”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	3mm (0.12")
Minimum Concave Surface Radius	6.5mm (0.26")
Part Number	T456CFME5R90A-2
Description	90° Mini Probe - sealed, 2m cable Probe Length: 45mm (1.77”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	3mm (0.12")
Minimum Concave Surface Radius	6.5mm (0.26")
Part Number	T456CF1P
Description	PINIP™ Integral Probe
Minimum Headroom	170mm (6.69”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	60mm (2.36")

Non-Ferrous (N)
Part Number	T456CN1S
Description	Straight Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	85mm (3.35”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	10mm (0.39")
Minimum Concave Surface Radius	10mm (0.39")
Part Number	T456CN1R
Description	90° Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	28mm (1.10”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	10mm (0.39")
Minimum Concave Surface Radius	14mm (0.55")
Part Number	T456CNM5R90A
Description	Mini 90° Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	10mm (0.39")
Minimum Concave Surface Radius	8.5mm (0.33")
Part Number	T456CNM5R90C
Description	Mini 90°Probe Probe Length: 150mm (5.90”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	10mm (0.39")
Minimum Concave Surface Radius	8.5mm (0.33")
Part Number	T456CNM5R90E
Description	Mini 90° Probe Probe Length: 400mm (15.7”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	10mm (0.39")
Minimum Concave Surface Radius	8.5mm (0.33")
Part Number	T456CN1AS
Description	Anodiser Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	100mm (3.94”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	10mm (0.39")
Minimum Concave Surface Radius	14mm (0.55")
Part Number	T456CN1P
Description	PINIP™ Integral Probe
Minimum Headroom	180mm (7.09”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	10mm (0.39")
Minimum Concave Surface Radius	50mm (1.97")

Ferrous & Non-Ferrous (FNF)
Part Number	T456CFNF1S
Description	Straight Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	88mm (3.46”)
Minimum Sample Diameter^b	F: 4mm (0.16”), N: 6mm (0.24”)
Minimum Convex Surface Diameter	F: 4mm (0.16") N: 26mm (1.02")
Minimum Concave Surface Radius	12.5mm (0.49")
Part Number	T456CFNF1ARM
Description	Straight Probe - armoured cable Probe Length: 45mm (1.77”)^c
Minimum Headroom	185mm (7.28")
Minimum Sample Diameter^b	F: 4mm (0.16”), N: 6mm (0.24”)
Minimum Convex Surface Diameter	F: 4mm (0.16") N: 26mm (1.02")
Minimum Concave Surface Radius	12.5mm (0.49")
Part Number	T456CFNF1U
Description	Scan Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	89mm (3.50”)
Minimum Sample Diameter^b	15mm (0.59”)
Minimum Convex Surface Diameter	Flat Surface
Minimum Concave Surface Radius	Flat Surface
Part Number	T456CFNF1R
Description	Right Angle Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	38mm (1.50”)
Minimum Sample Diameter^b	F: 4mm (0.16”), N: 6mm (0.24”)
Minimum Convex Surface Diameter	F: 4mm (0.16") N: 26mm (1.02")
Minimum Concave Surface Radius	12.5mm (0.49")
Part Number	T456CFNF1P
Description	PINIP™ Integral Probe
Minimum Headroom	180mm (7.09”)
Minimum Sample Diameter^b	F: 4mm (0.16”), N: 6mm (0.24”)
Minimum Convex Surface Diameter	F: 4mm (0.16") N: 26mm (1.02")
Minimum Concave Surface Radius	65mm (2.56")

Scale 2: Range : 0-5mm (0-200mils)
Accuracy^ae	±1-3% or ±20μm (±1-3% or ±1.0mil)
Range^d	0-5mm (0-200mils)
Resolution	1μm: 0-1mm (0.1mil: 0-50mils) 10μm: 1-5mm (1.0mil: 50-200mils)
Certificate
Ferrous (F)
Part Number	T456CF2S
Description	Straight Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	89mm (3.50”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	25mm (0.98")
Part Number	T456CF2U
Description	Scan Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	90mm (3.54”)
Minimum Sample Diameter^b	15mm (0.59”)
Minimum Convex Surface Diameter	Flat Surface
Minimum Concave Surface Radius	Flat Surface
Part Number	T456CF2R
Description	90° Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	32mm (1.26”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	25mm (0.98")
Part Number	T456CF2ARM
Description	Straight Probe - armoured cable Probe Length: 45mm (1.77”)^c
Minimum Headroom	138mm (5.43”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	25mm (0.98")
Part Number	T456CF2T
Description	Telescopic Probe Probe Length: 56-122cm (22-48”)^c
Minimum Headroom	36mm (1.42”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	25mm (0.98")
Part Number	T456CF2B
Description	Soft Coating Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	89mm (3.50”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	Flat Surface
Minimum Concave Surface Radius	Flat Surface
Part Number	T456CF2SW
Description	Waterproof Probe - 1m (3’) cable Probe Length: 45mm (1.77”)^c
Minimum Headroom	138mm (5.43”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	40mm (1.98")
Part Number	T456CF2SW-5
Description	Waterproof Probe - 5m (15’) cable Probe Length: 45mm (1.77”)^c
Minimum Headroom	138mm (5.43”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	40mm (1.98")
Part Number	T456CF2SW-15
Description	Waterproof Probe - 15m (45’) cable Probe Length: 45mm (1.77”)^c
Minimum Headroom	138mm (5.43”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	40mm (1.98")
Part Number	T456CF2SW-30
Description	Waterproof Probe - 30m (98’) cable Probe Length: 45mm (1.77”)^c
Minimum Headroom	138mm (5.43”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	40mm (1.98")
Part Number	T456CF2SW-50
Description	Waterproof Probe - 50m (164’) cable Probe Length: 45mm (1.77”)^c
Minimum Headroom	138mm (5.43”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	40mm (1.98")
Part Number	T456CF2SW-75
Description	Waterproof Probe - 75m (250’) cable Probe Length: 45mm (1.77”)^c
Minimum Headroom	138mm (5.43”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	40mm (1.98")
Part Number	T456CF2P
Description	PINIP™ Integral Probe
Minimum Headroom	174mm (6.85”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	60mm (2.36")
Part Number	T456CF2PHT
Description	Hi-Temperature PINIP™
Minimum Headroom	174mm (6.85”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	60mm (2.36")

Non-Ferrous (N)
Part Number	T456CN2S
Description	Straight Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	88mm (3.46”)
Minimum Sample Diameter^b	14mm (0.55”)
Minimum Convex Surface Diameter	100mm (3.97")
Minimum Concave Surface Radius	150mm (5.90")
Part Number	T456CN2P
Description	PINIP™ Integral Probe
Minimum Headroom	185mm (7.28")
Minimum Sample Diameter^b	14mm (0.55”)
Minimum Convex Surface Diameter	100mm (3.97")
Minimum Concave Surface Radius	150mm (5.90")

Scale 3: Range : 0-13mm (0-500mils)
Accuracy^a	±1-3% or ±50μm (±1-3% or ±2.0mils)
Range^d	0-13mm (0-500mils)
Resolution	1μm: 0-2mm (0.1mil: 0-100mils) 10μm: 2-13mm (1.0mil: 100-500mils)
Certificate
Ferrous (F)
Part Number	T456CF3S
Description	Straight Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	102mm (4.02”)
Minimum Sample Diameter^b	14mm (0.55”)
Minimum Convex Surface Diameter	15mm (0.59")
Minimum Concave Surface Radius	40mm (1.98")
Part Number	T456CF3P
Description	PINIP™ Integral Probe
Minimum Headroom	184mm (7.24”)
Minimum Sample Diameter^b	14mm (0.55”)
Minimum Convex Surface Diameter	15mm (0.59")
Minimum Concave Surface Radius	45mm (1.77")

Non-Ferrous (N)
Part Number	T456CN3S
Description	Straight Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	170mm (6.69”)
Minimum Sample Diameter^b	35mm (1.38”)
Minimum Convex Surface Diameter	Flat Surface
Minimum Concave Surface Radius	Flat Surface

Scale FM7: Range : 0.60-3.8mm (25-150mils)
Accuracy^a	±7.5% or ±114μm (±7.5% or ±4.5mils)
Range^d	0.60-3.8mm (25-150mils)
Resolution	1μm: 0-1mm (0.1mil: 0-139.3mils) 10μm: 1-3.8mm (1.0mil: 39.4-150mils)
Certificate
Ferrous (F)
Part Number	T456CFM7R45A
Description	45° Angle Mini Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	20mm (0.79”)
Minimum Sample Diameter^b	6.5 mm (0.26’’)
Minimum Convex Surface Diameter	-
Minimum Concave Surface Radius	-

Scale 6: Range : F: 0-25mm (F: 0-980mils) N: 0-30mm (N: 0-1200mils)
Accuracy^a	±1-3% or ±100μm (±1-3% or ±4.0mils)
Range^d	F: 0-25mm (F: 0-980mils) N: 0-30mm (N: 0-1200mils)
Resolution	10μm: 0-2mm (1mil: 0-100mils) 100μm: 2-30mm (10mils: 100-1200mils)
Certificate
Ferrous (F)
Part Number	T456CF6S
Description	Straight Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	150mm (5.90”)
Minimum Sample Diameter^b	51 x 51mm2 (2.17 x 2.17 inch2)
Minimum Convex Surface Diameter	35mm (1.40")
Minimum Concave Surface Radius	170mm (6.70")
Part Number	T456CF6ARM
Description	Straight Probe - armoured cable Probe Length: 45mm (1.77”)^c
Minimum Headroom	190mm (7.48”)
Minimum Sample Diameter^b	51 x 51mm2 (2.17 x 2.17 inch2)
Minimum Convex Surface Diameter	35mm (1.40")
Minimum Concave Surface Radius	170mm (6.70")

Non-Ferrous (N)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CN6S
Minimum Headroom	160mm (6.30”)
Minimum Sample Diameter^b	58mm (2.29”)
Minimum Convex Surface Diameter	Flat Surface
Minimum Concave Surface Radius	Flat Surface
Straight Probe - armoured cable Probe Length: 45mm (1.77”)^c	T456CN6ARM
Minimum Headroom	200mm (7.87")
Minimum Sample Diameter^b	58mm (2.29”)
Minimum Convex Surface Diameter	Flat Surface
Minimum Concave Surface Radius	Flat Surface

Scale 7: Range : 0-31mm (0-1220mils)
Accuracy^a	±1-3% or ±100μm (±1-3% or ±4.0mils)
Range^d	0-31mm (0-1220mils)
Resolution	10μm: 0-2mm (1.0mil: 0-100mils) 100μm: 2-31mm (10mils: 100-1220mils)
Certificate
Ferrous (F)
Part Number	T456CF7ARM
Description	Straight Probe armoured cable Probe Length: 45mm (1.77”)^c
Minimum Headroom	200mm (7.87")
Minimum Sample Diameter^b	55 x 55mm² (2.17 x 2.17 inch²)
Minimum Convex Surface Diameter	40mm (1.58")
Minimum Concave Surface Radius	170mm (6.70")

a. Whichever is the greater
b. FNF (F): FNF probe in F Mode / FNF (N): FNF probe in N
c. Probe length is measured from X to Y
d. Excluding Scan Probe end cap
e. Scan Probe accuracy is ±3% or ±0.02mm (0.8mil) with cap fitted, ±1-3% or ±0.02mm (0.8mil) without cap, when calibrated using a sample of the uncoated substrate
● Test Certificate supplied as standard.
Elcometer 456 Probes are covered by a one-year warranty

Downloads
- Downloads
  Elcometer 456 Coating Thickness Gauge Full Instruction Manual
  
  Elcometer 456 Ultra/Scan Probe Instruction Manual
  
  Elcometer 456 Waterproof Probe Instruction Manual
  
  Elcometer 456 Coating Thickness Gauge Datasheet
Part Numbers
- Part Numbers
  
  Elcometer 456 Coating Thickness Gauge Probe Range
  Substrate Probe
  
  Range
  
  Accuracy
  
  Probe Length
  
  Minimum Headroom
  
  Minimum Sample Diameter
  No data found!!
  - Elcometer 456 Coating Thickness Gauge 45° Angle Mini Probe - Scale 0.5
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-500μm, 0-20mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 300mm (11.80”)
    
    Minimum Headroom: 18mm (0.71”)
    
    Minimum Sample Diameter: 3mm (0.12”)
    
    Part Number : T456CFM3R45D
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe - Scale 0.5
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-500μm, 0-20mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 300mm (11.80”)
    
    Minimum Headroom: 16mm (0.63”)
    
    Minimum Sample Diameter: 3mm (0.12”)
    
    Part Number : T456CFM3R90D
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe - Scale 0.5
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-500μm, 0-20mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 150mm (5.90”)
    
    Minimum Headroom: 16mm (0.63”)
    
    Minimum Sample Diameter: 3mm (0.12”)
    
    Part Number : T456CFM3R90C
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Straight Mini Probe - Scale 0.5
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-500μm, 0-20mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 150mm (5.90”)
    
    Minimum Headroom: 6mm (0.24”)
    
    Minimum Sample Diameter: 3mm (0.12”)
    
    Part Number : T456CFM3---C
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge 45° Angle Mini Probe - Scale 0.5
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-500μm, 0-20mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 16mm (0.63”)
    
    Minimum Sample Diameter: 3mm (0.12”)
    
    Part Number : T456CFM3R45A
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe - Scale 0.5
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-500μm, 0-20mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 16mm (0.63”)
    
    Minimum Sample Diameter: 3mm (0.12”)
    
    Part Number : T456CFM3R90A
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Straight Mini Probe - Scale 0.5
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-500μm, 0-20mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 6mm (0.24”)
    
    Minimum Sample Diameter: 3mm (0.12”)
    
    Part Number : T456CFM3---A
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe - Scale 0.5
    
    Substrate Probe: Non-Ferrous (N) Probes
    
    Range: 0-500μm, 0-20mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 400mm (15.70”)
    
    Minimum Headroom: 16mm (0.63”)
    
    Minimum Sample Diameter: 4mm (0.16”)
    
    Part Number : T456CNM3R90E
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe - Scale 0.5
    
    Substrate Probe: Non-Ferrous (N) Probes
    
    Range: 0-500μm, 0-20mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 150mm (5.90”)
    
    Minimum Headroom: 16mm (0.63”)
    
    Minimum Sample Diameter: 4mm (0.16”)
    
    Part Number : T456CNM3R90C
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Straight Mini Probe - Scale 0.5
    
    Substrate Probe: Non-Ferrous (N) Probes
    
    Range: 0-500μm, 0-20mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 150mm (5.90”)
    
    Minimum Headroom: 6mm (0.24”)
    
    Minimum Sample Diameter: 4mm (0.16”)
    
    Part Number : T456CNM3---C
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe - Scale 0.5
    
    Substrate Probe: Non-Ferrous (N) Probes
    
    Range: 0-500μm, 0-20mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 16mm (0.63”)
    
    Minimum Sample Diameter: 4mm (0.16”)
    
    Part Number : T456CNM3R90A
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Straight Mini Probe - Scale 0.5
    
    Substrate Probe: Non-Ferrous (N) Probes
    
    Range: 0-500μm, 0-20mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 6mm (0.24”)
    
    Minimum Sample Diameter: 4mm (0.16”)
    
    Part Number : T456CNM3---A
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe - Scale 0.5
    
    Substrate Probe: Non-Ferrous - Graphite (N)
    
    Range: 0-500μm, 0-20mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 400mm (15.70”)
    
    Minimum Headroom: 16mm (0.63”)
    
    Minimum Sample Diameter: 4mm (0.16”)
    
    Part Number : T456CNMG3R90E
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe - Scale 0.5
    
    Substrate Probe: Non-Ferrous - Graphite (N)
    
    Range: 0-500μm, 0-20mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 150mm (5.90”)
    
    Minimum Headroom: 16mm (0.63”)
    
    Minimum Sample Diameter: 4mm (0.16”)
    
    Part Number : T456CNMG3R90C
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe - Scale 0.5
    
    Substrate Probe: Non-Ferrous - Graphite (N)
    
    Range: 0-500μm, 0-20mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 16mm (0.63”)
    
    Minimum Sample Diameter: 4mm (0.16”)
    
    Part Number : T456CNMG3R90A
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge 45° Angle Mini Probe - Scale FM7
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0.60-3.8mm, 25-150mils
    
    Accuracy: ±7.5% or ±114μm, ±7,5% or ±4,5mils
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 20mm (0.79”)
    
    Minimum Sample Diameter: 6.5 mm (0.26’’)
    
    Part Number : T456CFM7R45A
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Straight Probe - Scale 1
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-1,500μm, 0-60mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 85mm (3.35”)
    
    Minimum Sample Diameter: 4mm (0.16”)
    
    Part Number : T456CF1S
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Scan Probe - Scale 1
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-1,500μm, 0-60mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 86mm (3.38”)
    
    Minimum Sample Diameter: 15mm (0.59”)
    
    Part Number : T456CF1U
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Scan Probe Armoured - Scale 1
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-1,500μm, 0-60mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 140mm (5.51”)
    
    Minimum Sample Diameter: 15mm (0.59”)
    
    Part Number : T456CF1UARM
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge 90° Probe - Scale 1
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-1,500μm, 0-60mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 28mm (1.10”)
    
    Minimum Sample Diameter: 4mm (0.16”)
    
    Part Number : T456CF1R
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge 90° Mini Probe - Scale 1
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-1,500μm, 0-60mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 16mm (0.63”)
    
    Minimum Sample Diameter: 4mm (0.16”)
    
    Part Number : T456CFM5R90A
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge 90° Mini Probe sealed - Scale 1
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-1,500μm, 0-60mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 16mm (0.63”)
    
    Minimum Sample Diameter: 4mm (0.16”)
    
    Part Number : T456CFME5R90A
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge 90° Mini Probe sealed, 2m cable - Scale 1
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-1,500μm, 0-60mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 16mm (0.63”)
    
    Minimum Sample Diameter: 4mm (0.16”)
    
    Part Number : T456CFME5R90A-2
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge PINIP™ Integral Probe - Scale 1
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-1,500μm, 0-60mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Minimum Headroom: 170mm (6.69”)
    
    Minimum Sample Diameter: 4mm (0.16”)
    
    Part Number : T456CF1P
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Straight Probe - Scale 1
    
    Substrate Probe: Non-Ferrous (N) Probes
    
    Range: 0-1,500μm, 0-60mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 85mm (3.35”)
    
    Minimum Sample Diameter: 4mm (0.16”)
    
    Part Number : T456CN1S
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Straight Probe sealed - Scale 1
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-1,500μm, 0-60mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 85mm (3.35”)
    
    Minimum Sample Diameter: 4mm (0.16”)
    
    Part Number : T456CF1E
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge 90° Probe - Scale 1
    
    Substrate Probe: Non-Ferrous (N) Probes
    
    Range: 0-1,500μm, 0-60mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 28mm (1.10”)
    
    Minimum Sample Diameter: 4mm (0.16”)
    
    Part Number : T456CN1R
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Mini 90° Probe - Scale 1
    
    Substrate Probe: Non-Ferrous (N) Probes
    
    Range: 0-1,500μm, 0-60mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 16mm (0.63”)
    
    Minimum Sample Diameter: 4mm (0.16”)
    
    Part Number : T456CNM5R90A
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Mini 90° Probe - Scale 1
    
    Substrate Probe: Non-Ferrous (N) Probes
    
    Range: 0-1,500μm, 0-60mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 150mm (5.90”)
    
    Minimum Headroom: 16mm (0.63”)
    
    Minimum Sample Diameter: 4mm (0.16”)
    
    Part Number : T456CNM5R90C
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Mini 90° Probe - Scale 1
    
    Substrate Probe: Non-Ferrous (N) Probes
    
    Range: 0-1,500μm, 0-60mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 400mm (15.70”)
    
    Minimum Headroom: 16mm (0.63”)
    
    Minimum Sample Diameter: 4mm (0.16”)
    
    Part Number : T456CNM5R90E
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge PINIP™ Integral Probe - Scale 1
    
    Substrate Probe: Non-Ferrous (N) Probes
    
    Range: 0-1,500μm, 0-60mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Minimum Headroom: 180mm (7.09”)
    
    Minimum Sample Diameter: 4mm (0.16”)
    
    Part Number : T456CN1P
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Anodiser Probe - Scale 1
    
    Substrate Probe: Non-Ferrous (N) Probes
    
    Range: 0-1,500μm, 0-60mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 100mm (3.94”)
    
    Minimum Sample Diameter: 4mm (0.16”)
    
    Part Number : T456CN1AS
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Straight Probe - Scale 1
    
    Substrate Probe: Ferrous & Non-Ferrous (FNF) Probes
    
    Range: 0-1,500μm, 0-60mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 88mm (3.46”)
    
    Minimum Sample Diameter: F: 4mm (0.16”), N: 6mm (0.24”)
    
    Part Number : T456CFNF1S
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Scan Probe - Scale 1
    
    Substrate Probe: Ferrous & Non-Ferrous (FNF) Probes
    
    Range: 0-1,500μm, 0-60mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 89mm (3.50”)
    
    Minimum Sample Diameter: 15mm (0.59”)
    
    Part Number : T456CFNF1U
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Right Angle Probe - Scale 1
    
    Substrate Probe: Ferrous & Non-Ferrous (FNF) Probes
    
    Range: 0-1,500μm, 0-60mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 38mm (1.50”)
    
    Minimum Sample Diameter: F: 4mm (0.16”), N: 6mm (0.24”)
    
    Part Number : T456CFNF1R
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge PINIP™ Integral Probe - Scale 1
    
    Substrate Probe: Ferrous & Non-Ferrous (FNF) Probes
    
    Range: 0-1,500μm, 0-60mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Minimum Headroom: 180mm (7.09”)
    
    Minimum Sample Diameter: F: 4mm (0.16”), N: 6mm (0.24”)
    
    Part Number : T456CFNF1P
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Straight Probe Armoured Cable - Scale 1
    
    Substrate Probe: Ferrous & Non-Ferrous (FNF) Probes
    
    Range: 0-1,500μm, 0-60mils
    
    Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 185mm (7.28")
    
    Minimum Sample Diameter: F: 4mm (0.16”), N: 6mm (0.24”)
    
    Part Number : T456CFNF1ARM
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Straight Probe - Scale 2
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-5mm, 0-200mils
    
    Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 89mm (3.50”)
    
    Minimum Sample Diameter: 8mm (0.32”)
    
    Part Number : T456CF2S
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Straight Probe Armoured Cable - Scale 2
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-5mm, 0-200mils
    
    Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 138mm (5.43”)
    
    Minimum Sample Diameter: 8mm (0.32”)
    
    Part Number : T456CF2ARM
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Scan Probe - Scale 2
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-5mm, 0-200mils
    
    Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 90mm (3.54”)
    
    Minimum Sample Diameter: 15mm (0.59”)
    
    Part Number : T456CF2U
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge 90° Probe - Scale 2
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-5mm, 0-200mils
    
    Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 32mm (1.26”)
    
    Minimum Sample Diameter: 8mm (0.32”)
    
    Part Number : T456CF2R
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Telescopic Probe - Scale 2
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-5mm, 0-200mils
    
    Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
    
    Probe Length: 56-122cm (22-48”)
    
    Minimum Headroom: 36mm (1.42”)
    
    Minimum Sample Diameter: 8mm (0.32”)
    
    Part Number : T456CF2T
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Soft Coating Probe - Scale 2
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-5mm, 0-200mils
    
    Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 89mm (3.50”)
    
    Minimum Sample Diameter: 8mm (0.32”)
    
    Part Number : T456CF2B
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Waterproof Probe 1m (3’) cable - Scale 2
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-5mm, 0-200mils
    
    Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 138mm (5.43”)
    
    Minimum Sample Diameter: 8mm (0.32”)
    
    Part Number : T456CF2SW
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Waterproof Probe 5m (15") cable - Scale 2
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-5mm, 0-200mils
    
    Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 138mm (5.43”)
    
    Minimum Sample Diameter: 8mm (0.32”)
    
    Part Number : T456CF2SW-5
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Waterproof Probe 15m (45") cable - Scale 2
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-5mm, 0-200mils
    
    Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 138mm (5.43”)
    
    Minimum Sample Diameter: 8mm (0.32”)
    
    Part Number : T456CF2SW-15
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Waterproof Probe 30m (98") cable - Scale 2
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-5mm, 0-200mils
    
    Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 138mm (5.43”)
    
    Minimum Sample Diameter: 8mm (0.32”)
    
    Part Number : T456CF2SW-30
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Waterproof Probe 50m (164") cable - Scale 2
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-5mm, 0-200mils
    
    Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 138mm (5.43”)
    
    Minimum Sample Diameter: 8mm (0.32”)
    
    Part Number : T456CF2SW-50
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Waterproof Probe 75m (250") cable - Scale 2
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-5mm, 0-200mils
    
    Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 138mm (5.43”)
    
    Minimum Sample Diameter: 8mm (0.32”)
    
    Part Number : T456CF2SW-75
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge PINIP™ Integral Probe - Scale 2
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-5mm, 0-200mils
    
    Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
    
    Minimum Headroom: 174mm (6.85”)
    
    Minimum Sample Diameter: 8mm (0.32”)
    
    Part Number : T456CF2P
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Hi-Temperature PINIP™ - Scale 2
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-5mm, 0-200mils
    
    Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
    
    Minimum Headroom: 174mm (6.85”)
    
    Minimum Sample Diameter: 8mm (0.32”)
    
    Part Number : T456CF2PHT
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Straight Probe - Scale 2
    
    Substrate Probe: Non-Ferrous (N) Probes
    
    Range: 0-5mm, 0-200mils
    
    Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 88mm (3.46”)
    
    Minimum Sample Diameter: 14mm (0.55”)
    
    Part Number : T456CN2S
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge PINIP™ Integral Probe - Scale 2
    
    Substrate Probe: Non-Ferrous (N) Probes
    
    Range: 0-5mm, 0-200mils
    
    Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
    
    Minimum Headroom: 185mm (7.28")
    
    Minimum Sample Diameter: 14mm (0.55”)
    
    Part Number : T456CN2P
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Straight Probe - Scale 3
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-13mm, 0-500mils
    
    Accuracy: ±1-3% or ±50μm, ±1-3% or ±2.0mils
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 102mm (4.02”)
    
    Minimum Sample Diameter: 14mm (0.55”)
    
    Part Number : T456CF3S
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge PINIP™ Integral Probe - Scale 3
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-13mm, 0-500mils
    
    Accuracy: ±1-3% or ±50μm, ±1-3% or ±2.0mils
    
    Minimum Headroom: 184mm (7.24”)
    
    Minimum Sample Diameter: 14mm (0.55”)
    
    Part Number : T456CF3P
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Straight Probe - Scale 3
    
    Substrate Probe: Non-Ferrous (N) Probes
    
    Range: 0-13mm, 0-500mils
    
    Accuracy: ±1-3% or ±50μm, ±1-3% or ±2.0mils
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 170mm (6.69”)
    
    Minimum Sample Diameter: 35mm (1.38”)
    
    Part Number : T456CN3S
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Straight Probe - Scale 6
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-13mm, 0-500mils, F: 0-25mm, N: 0-30mm, F: 0-980mils, N: 0-1,200mils
    
    Accuracy: ±1-3% or ±100μm, ±1-3% or ±4.0mils
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 150mm (5.90”)
    
    Minimum Sample Diameter: 51 x 51mm2 (2.17 x 2.17 inch2)
    
    Part Number : T456CF6S
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Straight Probe armoured cable - Scale 6
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-13mm, 0-500mils, F: 0-25mm, N: 0-30mm, F: 0-980mils, N: 0-1,200mils
    
    Accuracy: ±1-3% or ±100μm, ±1-3% or ±4.0mils
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 190mm (7.48”)
    
    Minimum Sample Diameter: 51 x 51mm2 (2.17 x 2.17 inch2)
    
    Part Number : T456CF6ARM
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Straight Probe - Scale 6
    
    Substrate Probe: Non-Ferrous (N) Probes
    
    Range: 0-13mm, 0-500mils, F: 0-25mm, N: 0-30mm, F: 0-980mils, N: 0-1,200mils
    
    Accuracy: ±1-3% or ±100μm, ±1-3% or ±4.0mils
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 160mm (6.30”)
    
    Minimum Sample Diameter: 58mm (2.29”)
    
    Part Number : T456CN6S
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Straight Probe armoured cable - Scale 6
    
    Substrate Probe: Non-Ferrous (N) Probes
    
    Range: 0-13mm, 0-500mils, F: 0-25mm, N: 0-30mm, F: 0-980mils, N: 0-1,200mils
    
    Accuracy: ±1-3% or ±100μm, ±1-3% or ±4.0mils
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 200mm (7.87")
    
    Minimum Sample Diameter: 58mm (2.29”)
    
    Part Number : T456CN6ARM
    
    Certification : Test Certificate
  - Elcometer 456 Coating Thickness Gauge Straight Probe armoured cable - Scale 7
    
    Substrate Probe: Ferrous (F) Probes
    
    Range: 0-31mm, 0-1220mils
    
    Accuracy: ±1-3% or ±100μm, ±1-3% or ±4.0mils
    
    Probe Length: 45mm (1.77”)
    
    Minimum Headroom: 200mm (7.87")
    
    Minimum Sample Diameter: 55 x 55mm2 (2.17 x 2.17 inch2)
    
    Part Number : T456CF7ARM
    
    Certification : Test Certificate
Accessories
- Accessories
  
  Elcometer 456 Coating Thickness Gauge Probe Range
  - Jumbo Hand Grip F and N Probes
    Part NumberT9997766-
  - Jumbo Hand Grip Dual FNF Probes
    Part NumberT99913225
  - V-Probe Adaptor F and N Probes
    Part NumberT9997381-
  - V-Probe Adaptor Dual FNF Probes
    Part NumberT99913133
  - Replacement Ultra/Scan Probe End Caps (3 per pack) F & Dual FNF Probes
    Part NumberT456C23956
  - Elcometer 456 Roller Scan Probe Cap
    Part NumberT456C29050

Home
Elcometer 456 Coating Thickness Gauge Probe Range

Elcometer 456 Coating Thickness Gauge Probe Range

Protective Coatings
Industrial Finishing

All Elcometer 456 Coating Thickness Gauge probes are fully interchangeable and are available in a number of designs and scale ranges to meet your specific application.

Telescopic Probes for hard to reach places

Ferrous Probes (F)

Ferrous probes measure non-magnetic coatings on ferromagnetic substrates
Elcometer 456 ferrous gauges accept any ferrous probe

Non-Ferrous Probes (N)

Non-ferrous probes measure non-conductive coatings on non-ferrous metal substrates
Elcometer 456 non-ferrous gauges accept any non-ferrous probe

Dual Probes (FNF)

Dual FNF probes measure both ferrous and non-ferrous applications with automatic substrate detection
Elcometer 456 FNF gauges accept all ferrous, non-ferrous and dual FNF probes

High Temperature

Elcometer probes have a maximum operating temperature of 80°C (176°F)*
Separate ferrous probes have a maximum operating temperature of 150°C (300°F)*
Hi-Temperature PINIP™ has a maximum operating temperature of 250°C (480°F)*

*The stated temperature is the substrate temperature, and the duty cycle of the probe must be reduced to ensure a minimal temperature build-up within the probe.

Summary

Elcometer 456 Coating Thickness Gauge Probe Range

Ferrous coating thickness gauge probes measure non magnetic coatings on ferro-magnetic substrates. Elcometer 456 coating thickness ferrous gauges accept any ferrous probe.

Non-ferrous coating thickness gauge probes measure non conductive coatings on non-ferrous metal substrates and Elcometer 456 non-ferrous gauges accept any non-ferrous probe.

Dual FNF probes measure both ferrous and non-ferrous applications with automatic substrate detection. Elcometer 456 FNF coating thickness gauges accept all ferrous, non-ferrous and dual FNF probes.

Downloads

Elcometer 456 Coating Thickness Gauge Full Instruction Manual
Elcometer 456 Ultra/Scan Probe Instruction Manual
Elcometer 456 Waterproof Probe Instruction Manual
Elcometer 456 Coating Thickness Gauge Datasheet

Key Features

Elcometer 456 Coating Thickness Gauge Probe Range

Straight Probes

Standard Straight Probe

Standard Straight Probe
Standard probes measure coatings on both flat and curved surfaces.

Anodising Probe
Chemical resistant & washable - ideal for the anodising environment.

Mini Probe
Mini probes are ideal for harder to reach areas and edges.

Waterproof Probe
Sealed for use underwater at depth, even in diving gloves.

Soft Coatings Probe Soft Coating Probe
Large surface area probes are for soft materials (HVCA approved).

Thick Coatings Probe
Ideal for measuring coatings up to 31mm thick.

Scan Probes

Standard Scan Probe
Rapidly scan large surface areas without damaging the probe or the coating.

Ball Bearing Scan Probe*
Clip on adaptors for large coated structures, abrasive coatings and pre-construction primers.

Angled Probes

Right Angle Probe
Take readings in areas with restricted clearance.

Mini Right Angle Probe
For measuring coatings on edges, narrow pipes or small surface areas.

Telescopic Probe
Extending probes for hard to reach areas.

45° Angle Probe
Measure difficult to access or complex areas.

Plug In Integral Probes (PINIP™)

PINIP Probe PINIP™ Integral Probe
Transforms a separate gauge into an integral gauge, ideal for single-handed use.

High Temperture PINIP Probe Hi-Temperature PINIP™
Measure coatings on ferrous substrates up to 250°C (480°F).

Armoured Cable Probes

F / FNF Armoured Probe
Reinforced heavy duty cables reduce the risk of cable damage.

*UK Patent Number: 2571577

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Technical Specification

Elcometer 456 Coating Thickness Gauge Probe Range

Scale 0.5: Range : 0-500μm (0-20mils)
Accuracy^a	(±1-3% or ±0.1mil)
Range	0-500μm (0-20mils)
Resolution	0.1μm: 0-100μm (0.01mil: 0-5mils) 1μm: 100-500μm (0.1mil: 5-20mils)
Certificate
Description	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Minimum Convex Surface Diameter	Minimum Concave Surface Radius
Ferrous (F)
Straight Mini Probe Probe Length: 45mm (1.77”)^c	T456CFM3---A	6mm (0.24”)	3mm (0.12”)	1.9mm (0.07")	6.5mm (0.26")
Right Angle Mini Probe Probe Length: 45mm (1.77”)^c	T456CFM3R90A	16mm (0.63”)	3mm (0.12”)	1.9mm (0.07")	6.5mm (0.26")
45° Angle Mini Probe Probe Length: 45mm (1.77”)^c	T456CFM3R45A	16mm (0.63”)	3mm (0.12”)	1.9mm (0.07")	6.5mm (0.26")
Straight Mini Probe Probe Length: 150mm (5.90”)^c	T456CFM3---C	6mm (0.24”)	3mm (0.12”)	1.9mm (0.07")	6.5mm (0.26")
Right Angle Mini Probe Probe Length: 150mm (5.90”)^c	T456CFM3R90C	16mm (0.63”)	3mm (0.12”)	1.9mm (0.07")	6.5mm (0.26")
45° Angle Mini Probe Probe Length: 300mm (11.80”)^c	T456CFM3R45D	18mm (0.71”)	3mm (0.12”)	1.9mm (0.07")	6.5mm (0.26")
Right Angle Mini Probe Probe Length: 300mm (11.80”)^c	T456CFM3R90D	16mm (0.63”)	3mm (0.12”)	1.9mm (0.07")	6.5mm (0.26")

Non-Ferrous (N)
Straight Mini Probe Probe Length: 45mm (1.77”)^c	T456CNM3---A	6mm (0.24”)	4mm (0.16”)	6mm (0.24")	8.5mm (0.33")
Right Angle Mini Probe Probe Length: 45mm (1.77”)^c	T456CNM3R90A	16mm (0.63”)	4mm (0.16”)	6mm (0.24")	8.5mm (0.33")
Straight Mini Probe Probe Length: 150mm (5.90”)^c	T456CNM3---C	6mm (0.24”)	4mm (0.16”)	6mm (0.24")	8.5mm (0.33")
Right Angle Mini Probe Probe Length: 150mm (5.90”)^c	T456CNM3R90C	16mm (0.63”)	4mm (0.16”)	6mm (0.24")	8.5mm (0.33")
Right Angle Mini Probe Probe Length: 400mm (15.70”)^c	T456CNM3R90E	16mm (0.63”)	4mm (0.16”)	6mm (0.24")	8.5mm (0.33")

Non-Ferrous - Graphite (N)
Right Angle Mini Probe Probe Length: 45mm (1.77”)^c	T456CNMG3R90A	16mm (0.63”)	4mm (0.16”)	6mm (0.24")	8.5mm (0.33")
Right Angle Mini Probe Probe Length: 150mm (5.90”)^c	T456CNMG3R90C	16mm (0.63”)	4mm (0.16”)	6mm (0.24")	8.5mm (0.33")
Right Angle Mini Probe Probe Length: 400mm (15.70”)^c	T456CNMG3R90E	16mm (0.63”)	4mm (0.16”)	6mm (0.24")	8.5mm (0.33")

Scale 1: Range : 0-1500μm (0-60mils)
Accuracy^ae	±1-3% or ±2.5μm (±1-3% or ±0.1mil)
Range^d	0-1500μm (0-60mils)
Resolution	0.1μm: 0-100μm (0.01mil: 0-5mils) 1μm: 100-1500μm (0.1mil: 5-60mils)
Certificate
Description	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Minimum Convex Surface Diameter	Minimum Concave Surface Radius
Ferrous (F)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CF1S	85mm (3.35”)	4mm (0.16”)	4mm (0.16")	25mm (0.98")
Straight Probe - sealed Probe Length: 45mm (1.77”)^c	T456CF1E	85mm (3.35”)	4mm (0.16”)	4mm (0.16")	25mm (0.98")
Scan Probe Probe Length: 45mm (1.77”)^c	T456CF1U	86mm (3.38”)	15mm (0.59”)	Flat Surface	Flat Surface
Scan Probe - armoured Probe Length: 45mm (1.77”)^c	T456CF1UARM	140mm (5.51”)	15mm (0.59”)	Flat Surface	Flat Surface
90° Probe Probe Length: 45mm (1.77”)^c	T456CF1R	28mm (1.10”)	4mm (0.16”)	4mm (0.16")	25mm (0.98")
90° Mini Probe Probe Length: 45mm (1.77”)^c	T456CFM5R90A	16mm (0.63”)	4mm (0.16”)	3mm (0.12")	6.5mm (0.26")
90° Mini Probe - sealed Probe Length: 45mm (1.77”)^c	T456CFME5R90A	16mm (0.63”)	4mm (0.16”)	3mm (0.12")	6.5mm (0.26")
90° Mini Probe - sealed, 2m cable Probe Length: 45mm (1.77”)^c	T456CFME5R90A-2	16mm (0.63”)	4mm (0.16”)	3mm (0.12")	6.5mm (0.26")
PINIP™ Integral Probe	T456CF1P	170mm (6.69”)	4mm (0.16”)	4mm (0.16")	60mm (2.36")

Non-Ferrous (N)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CN1S	85mm (3.35”)	4mm (0.16”)	10mm (0.39")	10mm (0.39")
90° Probe Probe Length: 45mm (1.77”)^c	T456CN1R	28mm (1.10”)	4mm (0.16”)	10mm (0.39")	14mm (0.55")
Mini 90° Probe Probe Length: 45mm (1.77”)^c	T456CNM5R90A	16mm (0.63”)	4mm (0.16”)	10mm (0.39")	8.5mm (0.33")
Mini 90°Probe Probe Length: 150mm (5.90”)^c	T456CNM5R90C	16mm (0.63”)	4mm (0.16”)	10mm (0.39")	8.5mm (0.33")
Mini 90° Probe Probe Length: 400mm (15.7”)^c	T456CNM5R90E	16mm (0.63”)	4mm (0.16”)	10mm (0.39")	8.5mm (0.33")
Anodiser Probe Probe Length: 45mm (1.77”)^c	T456CN1AS	100mm (3.94”)	4mm (0.16”)	10mm (0.39")	14mm (0.55")
PINIP™ Integral Probe	T456CN1P	180mm (7.09”)	4mm (0.16”)	10mm (0.39")	50mm (1.97")

Ferrous & Non-Ferrous (FNF)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CFNF1S	88mm (3.46”)	F: 4mm (0.16”), N: 6mm (0.24”)	F: 4mm (0.16") N: 26mm (1.02")	12.5mm (0.49")
Straight Probe - armoured cable Probe Length: 45mm (1.77”)^c	T456CFNF1ARM	185mm (7.28")	F: 4mm (0.16”), N: 6mm (0.24”)	F: 4mm (0.16") N: 26mm (1.02")	12.5mm (0.49")
Scan Probe Probe Length: 45mm (1.77”)^c	T456CFNF1U	89mm (3.50”)	15mm (0.59”)	Flat Surface	Flat Surface
Right Angle Probe Probe Length: 45mm (1.77”)^c	T456CFNF1R	38mm (1.50”)	F: 4mm (0.16”), N: 6mm (0.24”)	F: 4mm (0.16") N: 26mm (1.02")	12.5mm (0.49")
PINIP™ Integral Probe	T456CFNF1P	180mm (7.09”)	F: 4mm (0.16”), N: 6mm (0.24”)	F: 4mm (0.16") N: 26mm (1.02")	65mm (2.56")

Scale 2: Range : 0-5mm (0-200mils)
Accuracy^ae	±1-3% or ±20μm (±1-3% or ±1.0mil)
Range^d	0-5mm (0-200mils)
Resolution	1μm: 0-1mm (0.1mil: 0-50mils) 10μm: 1-5mm (1.0mil: 50-200mils)
Certificate
Description	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Minimum Convex Surface Diameter	Minimum Concave Surface Radius
Ferrous (F)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CF2S	89mm (3.50”)	8mm (0.32”)	4mm (0.16")	25mm (0.98")
Scan Probe Probe Length: 45mm (1.77”)^c	T456CF2U	90mm (3.54”)	15mm (0.59”)	Flat Surface	Flat Surface
90° Probe Probe Length: 45mm (1.77”)^c	T456CF2R	32mm (1.26”)	8mm (0.32”)	4mm (0.16")	25mm (0.98")
Straight Probe - armoured cable Probe Length: 45mm (1.77”)^c	T456CF2ARM	138mm (5.43”)	8mm (0.32”)	4mm (0.16")	25mm (0.98")
Telescopic Probe Probe Length: 56-122cm (22-48”)^c	T456CF2T	36mm (1.42”)	8mm (0.32”)	4mm (0.16")	25mm (0.98")
Soft Coating Probe Probe Length: 45mm (1.77”)^c	T456CF2B	89mm (3.50”)	8mm (0.32”)	Flat Surface	Flat Surface
Waterproof Probe - 1m (3’) cable Probe Length: 45mm (1.77”)^c	T456CF2SW	138mm (5.43”)	8mm (0.32”)	4mm (0.16")	40mm (1.98")
Waterproof Probe - 5m (15’) cable Probe Length: 45mm (1.77”)^c	T456CF2SW-5	138mm (5.43”)	8mm (0.32”)	4mm (0.16")	40mm (1.98")
Waterproof Probe - 15m (45’) cable Probe Length: 45mm (1.77”)^c	T456CF2SW-15	138mm (5.43”)	8mm (0.32”)	4mm (0.16")	40mm (1.98")
Waterproof Probe - 30m (98’) cable Probe Length: 45mm (1.77”)^c	T456CF2SW-30	138mm (5.43”)	8mm (0.32”)	4mm (0.16")	40mm (1.98")
Waterproof Probe - 50m (164’) cable Probe Length: 45mm (1.77”)^c	T456CF2SW-50	138mm (5.43”)	8mm (0.32”)	4mm (0.16")	40mm (1.98")
Waterproof Probe - 75m (250’) cable Probe Length: 45mm (1.77”)^c	T456CF2SW-75	138mm (5.43”)	8mm (0.32”)	4mm (0.16")	40mm (1.98")
PINIP™ Integral Probe	T456CF2P	174mm (6.85”)	8mm (0.32”)	4mm (0.16")	60mm (2.36")
Hi-Temperature PINIP™	T456CF2PHT	174mm (6.85”)	8mm (0.32”)	4mm (0.16")	60mm (2.36")

Non-Ferrous (N)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CN2S	88mm (3.46”)	14mm (0.55”)	100mm (3.97")	150mm (5.90")
PINIP™ Integral Probe	T456CN2P	185mm (7.28")	14mm (0.55”)	100mm (3.97")	150mm (5.90")

Scale 3: Range : 0-13mm (0-500mils)
Accuracy^a	±1-3% or ±50μm (±1-3% or ±2.0mils)
Range^d	0-13mm (0-500mils)
Resolution	1μm: 0-2mm (0.1mil: 0-100mils) 10μm: 2-13mm (1.0mil: 100-500mils)
Certificate
Description	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Minimum Convex Surface Diameter	Minimum Concave Surface Radius
Ferrous (F)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CF3S	102mm (4.02”)	14mm (0.55”)	15mm (0.59")	40mm (1.98")
PINIP™ Integral Probe	T456CF3P	184mm (7.24”)	14mm (0.55”)	15mm (0.59")	45mm (1.77")

Non-Ferrous (N)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CN3S	170mm (6.69”)	35mm (1.38”)	Flat Surface	Flat Surface

Scale FM7: Range: 0.60-3.8mm (25-150mils)
Accuracy^a	±7.5% or ±114μm (±7.5% or ±4.5mils)
Range^d	0.60-3.8mm (25-150mils)
Resolution	1μm: 0-1mm (0.1mil: 0-139.3mils) 10μm: 1-3.8mm (1.0mil: 39.4-150mils)
Certificate
Description	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Minimum Convex Surface Diameter	Minimum Concave Surface Radius
Ferrous (F)
45° Angle Mini Probe Probe Length: 45mm (1.77”)^c	T456CFM7R45A	20mm (0.79”)	6.5 mm (0.26’’)	-	-

Scale 6: Range : F: 0-25mm (F: 0-980mils) N: 0-30mm (N: 0-1200mils)
Accuracy^a	±1-3% or ±100μm (±1-3% or ±4.0mils)
Range^d	F: 0-25mm (F: 0-980mils) N: 0-30mm (N: 0-1200mils)
Resolution	10μm: 0-2mm (1mil: 0-100mils) 100μm: 2-30mm (10mils: 100-1200mils)
Certificate
Description	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Minimum Convex Surface Diameter	Minimum Concave Surface Radius
Ferrous (F)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CF6S	150mm (5.90”)	51 x 51mm2 (2.17 x 2.17 inch2)	35mm (1.40")	170mm (6.70")
Straight Probe - armoured cable Probe Length: 45mm (1.77”)^c	T456CF6ARM	190mm (7.48”)	51 x 51mm2 (2.17 x 2.17 inch2)	35mm (1.40")	170mm (6.70")

Non-Ferrous (N)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CN6S	160mm (6.30”)	58mm (2.29”)	Flat Surface	Flat Surface
Straight Probe - armoured cable Probe Length: 45mm (1.77”)^c	T456CN6ARM	200mm (7.87")	58mm (2.29”)	Flat Surface	Flat Surface

Scale 7: Range : 0-31mm (0-1220mils)
Accuracy^a	±1-3% or ±100μm (±1-3% or ±4.0mils)
Range^d	0-31mm (0-1220mils)
Resolution	10μm: 0-2mm (1.0mil: 0-100mils) 100μm: 2-31mm (10mils: 100-1220mils)
Certificate
Description	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Minimum Convex Surface Diameter	Minimum Concave Surface Radius
Ferrous (F)
Straight Probe armoured cable Probe Length: 45mm (1.77”)^c	T456CF7ARM	200mm (7.87")	55 x 55mm² (2.17 x 2.17 inch²)	40mm (1.58")	170mm (6.70")

Scale 0.5: Range : 0-500μm (0-20mils)
Accuracy^a	(±1-3% or ±0.1mil)
Range	0-500μm (0-20mils)
Resolution	0.1μm: 0-100μm (0.01mil: 0-5mils) 1μm: 100-500μm (0.1mil: 5-20mils)
Certificate
Ferrous (F)
Part Number	T456CFM3---A
Description	Straight Mini Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	6mm (0.24”)
Minimum Sample Diameter^b	3mm (0.12”)
Minimum Convex Surface Diameter	1.9mm (0.07")
Minimum Concave Surface Radius	6.5mm (0.26")
Part Number	T456CFM3R90A
Description	Right Angle Mini Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	3mm (0.12”)
Minimum Convex Surface Diameter	1.9mm (0.07")
Minimum Concave Surface Radius	6.5mm (0.26")
Part Number	T456CFM3R45A
Description	45° Angle Mini Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	3mm (0.12”)
Minimum Convex Surface Diameter	1.9mm (0.07")
Minimum Concave Surface Radius	6.5mm (0.26")
Part Number	T456CFM3---C
Description	Straight Mini Probe Probe Length: 150mm (5.90”)^c
Minimum Headroom	6mm (0.24”)
Minimum Sample Diameter^b	3mm (0.12”)
Minimum Convex Surface Diameter	1.9mm (0.07")
Minimum Concave Surface Radius	6.5mm (0.26")
Part Number	T456CFM3R90C
Description	Right Angle Mini Probe Probe Length: 150mm (5.90”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	3mm (0.12”)
Minimum Convex Surface Diameter	1.9mm (0.07")
Minimum Concave Surface Radius	6.5mm (0.26")
Part Number	T456CFM3R45D
Description	45° Angle Mini Probe Probe Length: 300mm (11.80”)^c
Minimum Headroom	18mm (0.71”)
Minimum Sample Diameter^b	3mm (0.12”)
Minimum Convex Surface Diameter	1.9mm (0.07")
Minimum Concave Surface Radius	6.5mm (0.26")
Part Number	T456CFM3R90D
Description	Right Angle Mini Probe Probe Length: 300mm (11.80”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	3mm (0.12”)
Minimum Convex Surface Diameter	1.9mm (0.07")
Minimum Concave Surface Radius	6.5mm (0.26")

Non-Ferrous (N)
Part Number	T456CNM3---A
Description	Straight Mini Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	6mm (0.24”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	6mm (0.24")
Minimum Concave Surface Radius	8.5mm (0.33")
Part Number	T456CNM3R90A
Description	Right Angle Mini Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	6mm (0.24")
Minimum Concave Surface Radius	8.5mm (0.33")
Part Number	T456CNM3---C
Description	Straight Mini Probe Probe Length: 150mm (5.90”)^c
Minimum Headroom	6mm (0.24”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	6mm (0.24")
Minimum Concave Surface Radius	8.5mm (0.33")
Part Number	T456CNM3R90C
Description	Right Angle Mini Probe Probe Length: 150mm (5.90”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	6mm (0.24")
Minimum Concave Surface Radius	8.5mm (0.33")
Part Number	T456CNM3R90E
Description	Right Angle Mini Probe Probe Length: 400mm (15.70”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	6mm (0.24")
Minimum Concave Surface Radius	8.5mm (0.33")

Non-Ferrous - Graphite (N)
Part Number	T456CNMG3R90A
Description	Right Angle Mini Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	6mm (0.24")
Minimum Concave Surface Radius	8.5mm (0.33")
Part Number	T456CNMG3R90C
Description	Right Angle Mini Probe Probe Length: 150mm (5.90”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	6mm (0.24")
Minimum Concave Surface Radius	8.5mm (0.33")
Part Number	T456CNMG3R90E
Description	Right Angle Mini Probe Probe Length: 400mm (15.70”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	6mm (0.24")
Minimum Concave Surface Radius	8.5mm (0.33")

Scale 1: Range : 0-1500μm (0-60mils)
Accuracy^ae	±1-3% or ±2.5μm (±1-3% or ±0.1mil)
Range^d	0-1500μm (0-60mils)
Resolution	0.1μm: 0-100μm (0.01mil: 0-5mils) 1μm: 100-1500μm (0.1mil: 5-60mils)
Certificate
Ferrous (F)
Part Number	T456CF1S
Description	Straight Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	85mm (3.35”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	25mm (0.98")
Part Number	T456CF1E
Description	Straight Probe - sealed Probe Length: 45mm (1.77”)^c
Minimum Headroom	85mm (3.35”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	25mm (0.98")
Part Number	T456CF1U
Description	Scan Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	86mm (3.38”)
Minimum Sample Diameter^b	15mm (0.59”)
Minimum Convex Surface Diameter	Flat Surface
Minimum Concave Surface Radius	Flat Surface
Part Number	T456CF1UARM
Description	Scan Probe - armoured Probe Length: 45mm (1.77”)^c
Minimum Headroom	140mm (5.51”)
Minimum Sample Diameter^b	15mm (0.59”)
Minimum Convex Surface Diameter	Flat Surface
Minimum Concave Surface Radius	Flat Surface
Part Number	T456CF1R
Description	90° Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	28mm (1.10”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	25mm (0.98")
Part Number	T456CFM5R90A
Description	90° Mini Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	3mm (0.12")
Minimum Concave Surface Radius	6.5mm (0.26")
Part Number	T456CFME5R90A
Description	90° Mini Probe - sealed Probe Length: 45mm (1.77”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	3mm (0.12")
Minimum Concave Surface Radius	6.5mm (0.26")
Part Number	T456CFME5R90A-2
Description	90° Mini Probe - sealed, 2m cable Probe Length: 45mm (1.77”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	3mm (0.12")
Minimum Concave Surface Radius	6.5mm (0.26")
Part Number	T456CF1P
Description	PINIP™ Integral Probe
Minimum Headroom	170mm (6.69”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	60mm (2.36")

Non-Ferrous (N)
Part Number	T456CN1S
Description	Straight Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	85mm (3.35”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	10mm (0.39")
Minimum Concave Surface Radius	10mm (0.39")
Part Number	T456CN1R
Description	90° Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	28mm (1.10”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	10mm (0.39")
Minimum Concave Surface Radius	14mm (0.55")
Part Number	T456CNM5R90A
Description	Mini 90° Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	10mm (0.39")
Minimum Concave Surface Radius	8.5mm (0.33")
Part Number	T456CNM5R90C
Description	Mini 90°Probe Probe Length: 150mm (5.90”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	10mm (0.39")
Minimum Concave Surface Radius	8.5mm (0.33")
Part Number	T456CNM5R90E
Description	Mini 90° Probe Probe Length: 400mm (15.7”)^c
Minimum Headroom	16mm (0.63”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	10mm (0.39")
Minimum Concave Surface Radius	8.5mm (0.33")
Part Number	T456CN1AS
Description	Anodiser Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	100mm (3.94”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	10mm (0.39")
Minimum Concave Surface Radius	14mm (0.55")
Part Number	T456CN1P
Description	PINIP™ Integral Probe
Minimum Headroom	180mm (7.09”)
Minimum Sample Diameter^b	4mm (0.16”)
Minimum Convex Surface Diameter	10mm (0.39")
Minimum Concave Surface Radius	50mm (1.97")

Ferrous & Non-Ferrous (FNF)
Part Number	T456CFNF1S
Description	Straight Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	88mm (3.46”)
Minimum Sample Diameter^b	F: 4mm (0.16”), N: 6mm (0.24”)
Minimum Convex Surface Diameter	F: 4mm (0.16") N: 26mm (1.02")
Minimum Concave Surface Radius	12.5mm (0.49")
Part Number	T456CFNF1ARM
Description	Straight Probe - armoured cable Probe Length: 45mm (1.77”)^c
Minimum Headroom	185mm (7.28")
Minimum Sample Diameter^b	F: 4mm (0.16”), N: 6mm (0.24”)
Minimum Convex Surface Diameter	F: 4mm (0.16") N: 26mm (1.02")
Minimum Concave Surface Radius	12.5mm (0.49")
Part Number	T456CFNF1U
Description	Scan Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	89mm (3.50”)
Minimum Sample Diameter^b	15mm (0.59”)
Minimum Convex Surface Diameter	Flat Surface
Minimum Concave Surface Radius	Flat Surface
Part Number	T456CFNF1R
Description	Right Angle Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	38mm (1.50”)
Minimum Sample Diameter^b	F: 4mm (0.16”), N: 6mm (0.24”)
Minimum Convex Surface Diameter	F: 4mm (0.16") N: 26mm (1.02")
Minimum Concave Surface Radius	12.5mm (0.49")
Part Number	T456CFNF1P
Description	PINIP™ Integral Probe
Minimum Headroom	180mm (7.09”)
Minimum Sample Diameter^b	F: 4mm (0.16”), N: 6mm (0.24”)
Minimum Convex Surface Diameter	F: 4mm (0.16") N: 26mm (1.02")
Minimum Concave Surface Radius	65mm (2.56")

Scale 2: Range : 0-5mm (0-200mils)
Accuracy^ae	±1-3% or ±20μm (±1-3% or ±1.0mil)
Range^d	0-5mm (0-200mils)
Resolution	1μm: 0-1mm (0.1mil: 0-50mils) 10μm: 1-5mm (1.0mil: 50-200mils)
Certificate
Ferrous (F)
Part Number	T456CF2S
Description	Straight Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	89mm (3.50”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	25mm (0.98")
Part Number	T456CF2U
Description	Scan Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	90mm (3.54”)
Minimum Sample Diameter^b	15mm (0.59”)
Minimum Convex Surface Diameter	Flat Surface
Minimum Concave Surface Radius	Flat Surface
Part Number	T456CF2R
Description	90° Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	32mm (1.26”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	25mm (0.98")
Part Number	T456CF2ARM
Description	Straight Probe - armoured cable Probe Length: 45mm (1.77”)^c
Minimum Headroom	138mm (5.43”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	25mm (0.98")
Part Number	T456CF2T
Description	Telescopic Probe Probe Length: 56-122cm (22-48”)^c
Minimum Headroom	36mm (1.42”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	25mm (0.98")
Part Number	T456CF2B
Description	Soft Coating Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	89mm (3.50”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	Flat Surface
Minimum Concave Surface Radius	Flat Surface
Part Number	T456CF2SW
Description	Waterproof Probe - 1m (3’) cable Probe Length: 45mm (1.77”)^c
Minimum Headroom	138mm (5.43”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	40mm (1.98")
Part Number	T456CF2SW-5
Description	Waterproof Probe - 5m (15’) cable Probe Length: 45mm (1.77”)^c
Minimum Headroom	138mm (5.43”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	40mm (1.98")
Part Number	T456CF2SW-15
Description	Waterproof Probe - 15m (45’) cable Probe Length: 45mm (1.77”)^c
Minimum Headroom	138mm (5.43”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	40mm (1.98")
Part Number	T456CF2SW-30
Description	Waterproof Probe - 30m (98’) cable Probe Length: 45mm (1.77”)^c
Minimum Headroom	138mm (5.43”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	40mm (1.98")
Part Number	T456CF2SW-50
Description	Waterproof Probe - 50m (164’) cable Probe Length: 45mm (1.77”)^c
Minimum Headroom	138mm (5.43”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	40mm (1.98")
Part Number	T456CF2SW-75
Description	Waterproof Probe - 75m (250’) cable Probe Length: 45mm (1.77”)^c
Minimum Headroom	138mm (5.43”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	40mm (1.98")
Part Number	T456CF2P
Description	PINIP™ Integral Probe
Minimum Headroom	174mm (6.85”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	60mm (2.36")
Part Number	T456CF2PHT
Description	Hi-Temperature PINIP™
Minimum Headroom	174mm (6.85”)
Minimum Sample Diameter^b	8mm (0.32”)
Minimum Convex Surface Diameter	4mm (0.16")
Minimum Concave Surface Radius	60mm (2.36")

Non-Ferrous (N)
Part Number	T456CN2S
Description	Straight Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	88mm (3.46”)
Minimum Sample Diameter^b	14mm (0.55”)
Minimum Convex Surface Diameter	100mm (3.97")
Minimum Concave Surface Radius	150mm (5.90")
Part Number	T456CN2P
Description	PINIP™ Integral Probe
Minimum Headroom	185mm (7.28")
Minimum Sample Diameter^b	14mm (0.55”)
Minimum Convex Surface Diameter	100mm (3.97")
Minimum Concave Surface Radius	150mm (5.90")

Scale 3: Range : 0-13mm (0-500mils)
Accuracy^a	±1-3% or ±50μm (±1-3% or ±2.0mils)
Range^d	0-13mm (0-500mils)
Resolution	1μm: 0-2mm (0.1mil: 0-100mils) 10μm: 2-13mm (1.0mil: 100-500mils)
Certificate
Ferrous (F)
Part Number	T456CF3S
Description	Straight Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	102mm (4.02”)
Minimum Sample Diameter^b	14mm (0.55”)
Minimum Convex Surface Diameter	15mm (0.59")
Minimum Concave Surface Radius	40mm (1.98")
Part Number	T456CF3P
Description	PINIP™ Integral Probe
Minimum Headroom	184mm (7.24”)
Minimum Sample Diameter^b	14mm (0.55”)
Minimum Convex Surface Diameter	15mm (0.59")
Minimum Concave Surface Radius	45mm (1.77")

Non-Ferrous (N)
Part Number	T456CN3S
Description	Straight Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	170mm (6.69”)
Minimum Sample Diameter^b	35mm (1.38”)
Minimum Convex Surface Diameter	Flat Surface
Minimum Concave Surface Radius	Flat Surface

Scale FM7: Range : 0.60-3.8mm (25-150mils)
Accuracy^a	±7.5% or ±114μm (±7.5% or ±4.5mils)
Range^d	0.60-3.8mm (25-150mils)
Resolution	1μm: 0-1mm (0.1mil: 0-139.3mils) 10μm: 1-3.8mm (1.0mil: 39.4-150mils)
Certificate
Ferrous (F)
Part Number	T456CFM7R45A
Description	45° Angle Mini Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	20mm (0.79”)
Minimum Sample Diameter^b	6.5 mm (0.26’’)
Minimum Convex Surface Diameter	-
Minimum Concave Surface Radius	-

Scale 6: Range : F: 0-25mm (F: 0-980mils) N: 0-30mm (N: 0-1200mils)
Accuracy^a	±1-3% or ±100μm (±1-3% or ±4.0mils)
Range^d	F: 0-25mm (F: 0-980mils) N: 0-30mm (N: 0-1200mils)
Resolution	10μm: 0-2mm (1mil: 0-100mils) 100μm: 2-30mm (10mils: 100-1200mils)
Certificate
Ferrous (F)
Part Number	T456CF6S
Description	Straight Probe Probe Length: 45mm (1.77”)^c
Minimum Headroom	150mm (5.90”)
Minimum Sample Diameter^b	51 x 51mm2 (2.17 x 2.17 inch2)
Minimum Convex Surface Diameter	35mm (1.40")
Minimum Concave Surface Radius	170mm (6.70")
Part Number	T456CF6ARM
Description	Straight Probe - armoured cable Probe Length: 45mm (1.77”)^c
Minimum Headroom	190mm (7.48”)
Minimum Sample Diameter^b	51 x 51mm2 (2.17 x 2.17 inch2)
Minimum Convex Surface Diameter	35mm (1.40")
Minimum Concave Surface Radius	170mm (6.70")

Non-Ferrous (N)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CN6S
Minimum Headroom	160mm (6.30”)
Minimum Sample Diameter^b	58mm (2.29”)
Minimum Convex Surface Diameter	Flat Surface
Minimum Concave Surface Radius	Flat Surface
Straight Probe - armoured cable Probe Length: 45mm (1.77”)^c	T456CN6ARM
Minimum Headroom	200mm (7.87")
Minimum Sample Diameter^b	58mm (2.29”)
Minimum Convex Surface Diameter	Flat Surface
Minimum Concave Surface Radius	Flat Surface

Scale 7: Range : 0-31mm (0-1220mils)
Accuracy^a	±1-3% or ±100μm (±1-3% or ±4.0mils)
Range^d	0-31mm (0-1220mils)
Resolution	10μm: 0-2mm (1.0mil: 0-100mils) 100μm: 2-31mm (10mils: 100-1220mils)
Certificate
Ferrous (F)
Part Number	T456CF7ARM
Description	Straight Probe armoured cable Probe Length: 45mm (1.77”)^c
Minimum Headroom	200mm (7.87")
Minimum Sample Diameter^b	55 x 55mm² (2.17 x 2.17 inch²)
Minimum Convex Surface Diameter	40mm (1.58")
Minimum Concave Surface Radius	170mm (6.70")

Part Numbers

Elcometer 456 Coating Thickness Gauge Probe Range

Substrate Probe
Range
Accuracy
Probe Length
Minimum Headroom
Minimum Sample Diameter

Elcometer 456 Coating Thickness Gauge 45° Angle Mini Probe - Scale 0.5
- Substrate Probe: Ferrous (F) Probes
- Range: 0-500μm, 0-20mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 300mm (11.80”)
- Minimum Headroom: 18mm (0.71”)
- Minimum Sample Diameter: 3mm (0.12”)
- Part Number : T456CFM3R45D
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe - Scale 0.5
- Substrate Probe: Ferrous (F) Probes
- Range: 0-500μm, 0-20mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 300mm (11.80”)
- Minimum Headroom: 16mm (0.63”)
- Minimum Sample Diameter: 3mm (0.12”)
- Part Number : T456CFM3R90D
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe - Scale 0.5
- Substrate Probe: Ferrous (F) Probes
- Range: 0-500μm, 0-20mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 150mm (5.90”)
- Minimum Headroom: 16mm (0.63”)
- Minimum Sample Diameter: 3mm (0.12”)
- Part Number : T456CFM3R90C
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Mini Probe - Scale 0.5
- Substrate Probe: Ferrous (F) Probes
- Range: 0-500μm, 0-20mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 150mm (5.90”)
- Minimum Headroom: 6mm (0.24”)
- Minimum Sample Diameter: 3mm (0.12”)
- Part Number : T456CFM3---C
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge 45° Angle Mini Probe - Scale 0.5
- Substrate Probe: Ferrous (F) Probes
- Range: 0-500μm, 0-20mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 16mm (0.63”)
- Minimum Sample Diameter: 3mm (0.12”)
- Part Number : T456CFM3R45A
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe - Scale 0.5
- Substrate Probe: Ferrous (F) Probes
- Range: 0-500μm, 0-20mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 16mm (0.63”)
- Minimum Sample Diameter: 3mm (0.12”)
- Part Number : T456CFM3R90A
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Mini Probe - Scale 0.5
- Substrate Probe: Ferrous (F) Probes
- Range: 0-500μm, 0-20mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 6mm (0.24”)
- Minimum Sample Diameter: 3mm (0.12”)
- Part Number : T456CFM3---A
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe - Scale 0.5
- Substrate Probe: Non-Ferrous (N) Probes
- Range: 0-500μm, 0-20mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 400mm (15.70”)
- Minimum Headroom: 16mm (0.63”)
- Minimum Sample Diameter: 4mm (0.16”)
- Part Number : T456CNM3R90E
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe - Scale 0.5
- Substrate Probe: Non-Ferrous (N) Probes
- Range: 0-500μm, 0-20mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 150mm (5.90”)
- Minimum Headroom: 16mm (0.63”)
- Minimum Sample Diameter: 4mm (0.16”)
- Part Number : T456CNM3R90C
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Mini Probe - Scale 0.5
- Substrate Probe: Non-Ferrous (N) Probes
- Range: 0-500μm, 0-20mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 150mm (5.90”)
- Minimum Headroom: 6mm (0.24”)
- Minimum Sample Diameter: 4mm (0.16”)
- Part Number : T456CNM3---C
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe - Scale 0.5
- Substrate Probe: Non-Ferrous (N) Probes
- Range: 0-500μm, 0-20mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 16mm (0.63”)
- Minimum Sample Diameter: 4mm (0.16”)
- Part Number : T456CNM3R90A
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Mini Probe - Scale 0.5
- Substrate Probe: Non-Ferrous (N) Probes
- Range: 0-500μm, 0-20mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 6mm (0.24”)
- Minimum Sample Diameter: 4mm (0.16”)
- Part Number : T456CNM3---A
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe - Scale 0.5
- Substrate Probe: Non-Ferrous - Graphite (N)
- Range: 0-500μm, 0-20mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 400mm (15.70”)
- Minimum Headroom: 16mm (0.63”)
- Minimum Sample Diameter: 4mm (0.16”)
- Part Number : T456CNMG3R90E
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe - Scale 0.5
- Substrate Probe: Non-Ferrous - Graphite (N)
- Range: 0-500μm, 0-20mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 150mm (5.90”)
- Minimum Headroom: 16mm (0.63”)
- Minimum Sample Diameter: 4mm (0.16”)
- Part Number : T456CNMG3R90C
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe - Scale 0.5
- Substrate Probe: Non-Ferrous - Graphite (N)
- Range: 0-500μm, 0-20mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 16mm (0.63”)
- Minimum Sample Diameter: 4mm (0.16”)
- Part Number : T456CNMG3R90A
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge 45° Angle Mini Probe - Scale FM7
- Substrate Probe: Ferrous (F) Probes
- Range: 0.60-3.8mm, 25-150mils
- Accuracy: ±7.5% or ±114μm, ±7,5% or ±4,5mils
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 20mm (0.79”)
- Minimum Sample Diameter: 6.5 mm (0.26’’)
- Part Number : T456CFM7R45A
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe - Scale 1
- Substrate Probe: Ferrous (F) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 85mm (3.35”)
- Minimum Sample Diameter: 4mm (0.16”)
- Part Number : T456CF1S
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Scan Probe - Scale 1
- Substrate Probe: Ferrous (F) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 86mm (3.38”)
- Minimum Sample Diameter: 15mm (0.59”)
- Part Number : T456CF1U
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Scan Probe Armoured - Scale 1
- Substrate Probe: Ferrous (F) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 140mm (5.51”)
- Minimum Sample Diameter: 15mm (0.59”)
- Part Number : T456CF1UARM
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge 90° Probe - Scale 1
- Substrate Probe: Ferrous (F) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 28mm (1.10”)
- Minimum Sample Diameter: 4mm (0.16”)
- Part Number : T456CF1R
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge 90° Mini Probe - Scale 1
- Substrate Probe: Ferrous (F) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 16mm (0.63”)
- Minimum Sample Diameter: 4mm (0.16”)
- Part Number : T456CFM5R90A
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge 90° Mini Probe sealed - Scale 1
- Substrate Probe: Ferrous (F) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 16mm (0.63”)
- Minimum Sample Diameter: 4mm (0.16”)
- Part Number : T456CFME5R90A
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge 90° Mini Probe sealed, 2m cable - Scale 1
- Substrate Probe: Ferrous (F) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 16mm (0.63”)
- Minimum Sample Diameter: 4mm (0.16”)
- Part Number : T456CFME5R90A-2
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge PINIP™ Integral Probe - Scale 1
- Substrate Probe: Ferrous (F) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Minimum Headroom: 170mm (6.69”)
- Minimum Sample Diameter: 4mm (0.16”)
- Part Number : T456CF1P
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe - Scale 1
- Substrate Probe: Non-Ferrous (N) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 85mm (3.35”)
- Minimum Sample Diameter: 4mm (0.16”)
- Part Number : T456CN1S
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe sealed - Scale 1
- Substrate Probe: Ferrous (F) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 85mm (3.35”)
- Minimum Sample Diameter: 4mm (0.16”)
- Part Number : T456CF1E
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge 90° Probe - Scale 1
- Substrate Probe: Non-Ferrous (N) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 28mm (1.10”)
- Minimum Sample Diameter: 4mm (0.16”)
- Part Number : T456CN1R
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Mini 90° Probe - Scale 1
- Substrate Probe: Non-Ferrous (N) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 16mm (0.63”)
- Minimum Sample Diameter: 4mm (0.16”)
- Part Number : T456CNM5R90A
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Mini 90° Probe - Scale 1
- Substrate Probe: Non-Ferrous (N) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 150mm (5.90”)
- Minimum Headroom: 16mm (0.63”)
- Minimum Sample Diameter: 4mm (0.16”)
- Part Number : T456CNM5R90C
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Mini 90° Probe - Scale 1
- Substrate Probe: Non-Ferrous (N) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 400mm (15.70”)
- Minimum Headroom: 16mm (0.63”)
- Minimum Sample Diameter: 4mm (0.16”)
- Part Number : T456CNM5R90E
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge PINIP™ Integral Probe - Scale 1
- Substrate Probe: Non-Ferrous (N) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Minimum Headroom: 180mm (7.09”)
- Minimum Sample Diameter: 4mm (0.16”)
- Part Number : T456CN1P
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Anodiser Probe - Scale 1
- Substrate Probe: Non-Ferrous (N) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 100mm (3.94”)
- Minimum Sample Diameter: 4mm (0.16”)
- Part Number : T456CN1AS
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe - Scale 1
- Substrate Probe: Ferrous & Non-Ferrous (FNF) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 88mm (3.46”)
- Minimum Sample Diameter: F: 4mm (0.16”), N: 6mm (0.24”)
- Part Number : T456CFNF1S
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Scan Probe - Scale 1
- Substrate Probe: Ferrous & Non-Ferrous (FNF) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 89mm (3.50”)
- Minimum Sample Diameter: 15mm (0.59”)
- Part Number : T456CFNF1U
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Probe - Scale 1
- Substrate Probe: Ferrous & Non-Ferrous (FNF) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 38mm (1.50”)
- Minimum Sample Diameter: F: 4mm (0.16”), N: 6mm (0.24”)
- Part Number : T456CFNF1R
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge PINIP™ Integral Probe - Scale 1
- Substrate Probe: Ferrous & Non-Ferrous (FNF) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Minimum Headroom: 180mm (7.09”)
- Minimum Sample Diameter: F: 4mm (0.16”), N: 6mm (0.24”)
- Part Number : T456CFNF1P
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe Armoured Cable - Scale 1
- Substrate Probe: Ferrous & Non-Ferrous (FNF) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 185mm (7.28")
- Minimum Sample Diameter: F: 4mm (0.16”), N: 6mm (0.24”)
- Part Number : T456CFNF1ARM
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe - Scale 2
- Substrate Probe: Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 89mm (3.50”)
- Minimum Sample Diameter: 8mm (0.32”)
- Part Number : T456CF2S
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe Armoured Cable - Scale 2
- Substrate Probe: Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 138mm (5.43”)
- Minimum Sample Diameter: 8mm (0.32”)
- Part Number : T456CF2ARM
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Scan Probe - Scale 2
- Substrate Probe: Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 90mm (3.54”)
- Minimum Sample Diameter: 15mm (0.59”)
- Part Number : T456CF2U
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge 90° Probe - Scale 2
- Substrate Probe: Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 32mm (1.26”)
- Minimum Sample Diameter: 8mm (0.32”)
- Part Number : T456CF2R
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Telescopic Probe - Scale 2
- Substrate Probe: Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length: 56-122cm (22-48”)
- Minimum Headroom: 36mm (1.42”)
- Minimum Sample Diameter: 8mm (0.32”)
- Part Number : T456CF2T
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Soft Coating Probe - Scale 2
- Substrate Probe: Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 89mm (3.50”)
- Minimum Sample Diameter: 8mm (0.32”)
- Part Number : T456CF2B
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Waterproof Probe 1m (3’) cable - Scale 2
- Substrate Probe: Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 138mm (5.43”)
- Minimum Sample Diameter: 8mm (0.32”)
- Part Number : T456CF2SW
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Waterproof Probe 5m (15") cable - Scale 2
- Substrate Probe: Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 138mm (5.43”)
- Minimum Sample Diameter: 8mm (0.32”)
- Part Number : T456CF2SW-5
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Waterproof Probe 15m (45") cable - Scale 2
- Substrate Probe: Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 138mm (5.43”)
- Minimum Sample Diameter: 8mm (0.32”)
- Part Number : T456CF2SW-15
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Waterproof Probe 30m (98") cable - Scale 2
- Substrate Probe: Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 138mm (5.43”)
- Minimum Sample Diameter: 8mm (0.32”)
- Part Number : T456CF2SW-30
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Waterproof Probe 50m (164") cable - Scale 2
- Substrate Probe: Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 138mm (5.43”)
- Minimum Sample Diameter: 8mm (0.32”)
- Part Number : T456CF2SW-50
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Waterproof Probe 75m (250") cable - Scale 2
- Substrate Probe: Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 138mm (5.43”)
- Minimum Sample Diameter: 8mm (0.32”)
- Part Number : T456CF2SW-75
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge PINIP™ Integral Probe - Scale 2
- Substrate Probe: Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
- Minimum Headroom: 174mm (6.85”)
- Minimum Sample Diameter: 8mm (0.32”)
- Part Number : T456CF2P
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Hi-Temperature PINIP™ - Scale 2
- Substrate Probe: Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
- Minimum Headroom: 174mm (6.85”)
- Minimum Sample Diameter: 8mm (0.32”)
- Part Number : T456CF2PHT
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe - Scale 2
- Substrate Probe: Non-Ferrous (N) Probes
- Range: 0-5mm, 0-200mils
- Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 88mm (3.46”)
- Minimum Sample Diameter: 14mm (0.55”)
- Part Number : T456CN2S
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge PINIP™ Integral Probe - Scale 2
- Substrate Probe: Non-Ferrous (N) Probes
- Range: 0-5mm, 0-200mils
- Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
- Minimum Headroom: 185mm (7.28")
- Minimum Sample Diameter: 14mm (0.55”)
- Part Number : T456CN2P
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe - Scale 3
- Substrate Probe: Ferrous (F) Probes
- Range: 0-13mm, 0-500mils
- Accuracy: ±1-3% or ±50μm, ±1-3% or ±2.0mils
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 102mm (4.02”)
- Minimum Sample Diameter: 14mm (0.55”)
- Part Number : T456CF3S
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge PINIP™ Integral Probe - Scale 3
- Substrate Probe: Ferrous (F) Probes
- Range: 0-13mm, 0-500mils
- Accuracy: ±1-3% or ±50μm, ±1-3% or ±2.0mils
- Minimum Headroom: 184mm (7.24”)
- Minimum Sample Diameter: 14mm (0.55”)
- Part Number : T456CF3P
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe - Scale 3
- Substrate Probe: Non-Ferrous (N) Probes
- Range: 0-13mm, 0-500mils
- Accuracy: ±1-3% or ±50μm, ±1-3% or ±2.0mils
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 170mm (6.69”)
- Minimum Sample Diameter: 35mm (1.38”)
- Part Number : T456CN3S
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe - Scale 6
- Substrate Probe: Ferrous (F) Probes
- Range: 0-13mm, 0-500mils, F: 0-25mm, N: 0-30mm, F: 0-980mils, N: 0-1,200mils
- Accuracy: ±1-3% or ±100μm, ±1-3% or ±4.0mils
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 150mm (5.90”)
- Minimum Sample Diameter: 51 x 51mm2 (2.17 x 2.17 inch2)
- Part Number : T456CF6S
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe armoured cable - Scale 6
- Substrate Probe: Ferrous (F) Probes
- Range: 0-13mm, 0-500mils, F: 0-25mm, N: 0-30mm, F: 0-980mils, N: 0-1,200mils
- Accuracy: ±1-3% or ±100μm, ±1-3% or ±4.0mils
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 190mm (7.48”)
- Minimum Sample Diameter: 51 x 51mm2 (2.17 x 2.17 inch2)
- Part Number : T456CF6ARM
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe - Scale 6
- Substrate Probe: Non-Ferrous (N) Probes
- Range: 0-13mm, 0-500mils, F: 0-25mm, N: 0-30mm, F: 0-980mils, N: 0-1,200mils
- Accuracy: ±1-3% or ±100μm, ±1-3% or ±4.0mils
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 160mm (6.30”)
- Minimum Sample Diameter: 58mm (2.29”)
- Part Number : T456CN6S
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe armoured cable - Scale 6
- Substrate Probe: Non-Ferrous (N) Probes
- Range: 0-13mm, 0-500mils, F: 0-25mm, N: 0-30mm, F: 0-980mils, N: 0-1,200mils
- Accuracy: ±1-3% or ±100μm, ±1-3% or ±4.0mils
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 200mm (7.87")
- Minimum Sample Diameter: 58mm (2.29”)
- Part Number : T456CN6ARM
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe armoured cable - Scale 7
- Substrate Probe: Ferrous (F) Probes
- Range: 0-31mm, 0-1220mils
- Accuracy: ±1-3% or ±100μm, ±1-3% or ±4.0mils
- Probe Length: 45mm (1.77”)
- Minimum Headroom: 200mm (7.87")
- Minimum Sample Diameter: 55 x 55mm2 (2.17 x 2.17 inch2)
- Part Number : T456CF7ARM
- Certification : Test Certificate

Accessories

Elcometer 456 Coating Thickness Gauge Probe Range

Jumbo Hand Grip F and N Probes
Part Number: T9997766-
Jumbo Hand Grip Dual FNF Probes
Part Number: T99913225
V-Probe Adaptor F and N Probes
Part Number: T9997381-
V-Probe Adaptor Dual FNF Probes
Part Number: T99913133
Replacement Ultra/Scan Probe End Caps (3 per pack) F & Dual FNF Probes
Part Number: T456C23956
Elcometer 456 Roller Scan Probe Cap
Part Number: T456C29050

Coatings Inspection

Physical Test Equipment

NEW ElcoPatch™
Holiday Repair Kit

Coatings Inspection

Physical Test Equipment

NEW ElcoPatch™
Holiday Repair Kit

Elcometer 456 Coating Thickness Gauge Probe Range

All Elcometer 456 Coating Thickness Gauge probes are fully interchangeable and are available in a number of designs and scale ranges to meet your specific application.

Summary

Ferrous Probes (F)

Non-Ferrous Probes (N)

Dual Probes (FNF)

High Temperature

*The stated temperature is the substrate temperature, and the duty cycle of the probe must be reduced to ensure a minimal temperature build-up within the probe.

Key Features

Elcometer 456 Coating Thickness Gauge Probe Range

Straight Probes

Scan Probes

Angled Probes

Plug In Integral Probes (PINIP™)

Armoured Cable Probes

Elcometer 456 Coating Thickness Gauge Probe Range

All Elcometer 456 Coating Thickness Gauge probes are fully interchangeable and are available in a number of designs and scale ranges to meet your specific application.

Ferrous Probes (F)

Non-Ferrous Probes (N)

Dual Probes (FNF)

High Temperature

*The stated temperature is the substrate temperature, and the duty cycle of the probe must be reduced to ensure a minimal temperature build-up within the probe.

Summary

Elcometer 456 Coating Thickness Gauge Probe Range

Key Features

Elcometer 456 Coating Thickness Gauge Probe Range

Straight Probes

Scan Probes

Angled Probes

Plug In Integral Probes (PINIP™)

Armoured Cable Probes