Elcometer 1800 Density Cup
- Industrial Finishing
- Laboratory & Physical Test
The Elcometer 1800 Density Cup is a stainless steel precision cup for determining the specific gravity or density of paints and similar products.
- Summary
-
Summary
-
The density cup consists of a cylindrical container and lid with a hole for the exhaust of excess liquid.
-
- Key Features
-
Key Features
Elcometer 1800 Density Cup
How to use a Density Cup
1. Weigh the cup and lid when empty
2. Fill the cup with liquid to the very top
3. Place lid on the Cup, removing excess liquid*
4. Weigh the Density Cup when full
5. Divide the weight of the liquid by the cup volume/capacity to determine the Specific Gravity
The formulae for calculating Density and Specific Gravity are:
Density = Liquid Weight / Cup VolumeSpecific Gravity = Density of the Material / Density of Water at the Same Temperature
Note:
50cc = 50cm³ = Volume
100cc = 100cm³ = Volume*Each Cup has an escape hole in the lid to allow excess liquid to escape. Any excess liquid should be removed before weighing.
-
- Technical Information
-
Technical SpecificationElcometer 1800 Density Cup
Part Number Description Volume/Capacity Certificate K0001800M001 Elcometer 1800/1 Density Cup Stainless Steel 50cc 
K0001800M002 Elcometer 1800/2 Density Cup Stainless Steel with calibration certificate 50cc 
K0001800M005 Elcometer 1800/5 Density Cup stainless steel 100cc
K0001800M006 Elcometer 1800/6 Density Cup stainless steel with calibration certificate 100cc
Part Number Certificate K0001800M001
Description Elcometer 1800/1 Density Cup Stainless Steel Volume/Capacity 50cc Part Number Certificate K0001800M002
Description Elcometer 1800/2 Density Cup Stainless Steel with calibration certificate Volume/Capacity 50cc Part Number Certificate K0001800M005
Description Elcometer 1800/5 Density Cup stainless steel Volume/Capacity 100cc Part Number Certificate K0001800M006
Description Elcometer 1800/6 Density Cup stainless steel with calibration certificate Volume/Capacity 100cc ● Certificate supplied as standard.- Standards
-
StandardsElcometer 1800 Density Cup
ASTM D 891-B, ASTM D1475, DIN 53217-2, FTMS 141 4183, ISO 2811-1, JIS K 5600-2-4, NBN T22-110, NFT 30-020
Standards in grey have been superseded but are still recognised in some industries.
- Downloads
-
Downloads
-
Elcometer 1800 Density Cup Stainless Steel Instruction Manual
-
Elcometer 1800 Density Cup Stainless Steel Datasheet
- Part Numbers
-
Part NumbersElcometer 1800 Density Cup
-
Elcometer 1800/1 Density Cup Stainless SteelThe Elcometer 1800/1 Density Cup Stainless Steel has a volume/capacity of 50cc.
- Volume/Capacity: 50cc
- Part Number : K0001800M001
- Certification : No Certificate
-
Elcometer 1800/2 Density Cup Stainless Steel with calibration certificateThe Elcometer 1800/2 Density Cup Stainless Steel has a volume/capacity of 50cc and is supplied with a calibration certificate.
- Volume/Capacity: 50cc
- Part Number : K0001800M002
- Certification : Calibration Certificate
-
Elcometer 1800/5 Density Cup stainless steelThe Elcometer 1800/5 Density Cup Stainless Steel has a volume/capacity of 100cc.
- Volume/Capacity: 100cc
- Part Number : K0001800M005
- Certification : No Certificate
-
Elcometer 1800/6 Density Cup stainless steel with calibration certificateThe Elcometer 1800/6 Density Cup Stainless Steel has a volume/capacity of 100cc and is supplied with a calibration certificate.
- Volume/Capacity: 100cc
- Part Number : K0001800M006
- Certification : Calibration Certificate
Elcometer 1800 Density Cup
- Industrial Finishing
- Laboratory & Physical Test
The Elcometer 1800 Density Cup is a stainless steel precision cup for determining the specific gravity or density of paints and similar products.
Summary
Elcometer 1800 Density Cup
The density cup consists of a cylindrical container and lid with a hole for the exhaust of excess liquid.
Downloads-
Elcometer 1800 Density Cup Stainless Steel Instruction Manual
-
Elcometer 1800 Density Cup Stainless Steel Datasheet
Key Features
Elcometer 1800 Density Cup
How to use a Density Cup
1. Weigh the cup and lid when empty2. Fill the cup with liquid to the very top3. Place lid on the Cup, removing excess liquid*
4. Weigh the Density Cup when full
5. Divide the weight of the liquid by the cup volume/capacity to determine the Specific Gravity
The formulae for calculating Density and Specific Gravity are:
Density = Liquid Weight / Cup VolumeSpecific Gravity = Density of the Material / Density of Water at the Same Temperature
Note:
50cc = 50cm³ = Volume
100cc = 100cm³ = Volume*Each Cup has an escape hole in the lid to allow excess liquid to escape. Any excess liquid should be removed before weighing.
Technical SpecificationElcometer 1800 Density CupPart Number Description Volume/Capacity Certificate K0001800M001 Elcometer 1800/1 Density Cup Stainless Steel 50cc
K0001800M002 Elcometer 1800/2 Density Cup Stainless Steel with calibration certificate 50cc
K0001800M005 Elcometer 1800/5 Density Cup stainless steel 100cc
K0001800M006 Elcometer 1800/6 Density Cup stainless steel with calibration certificate 100cc
Part Number Certificate K0001800M001
Description Elcometer 1800/1 Density Cup Stainless Steel Volume/Capacity 50cc Part Number Certificate K0001800M002
Description Elcometer 1800/2 Density Cup Stainless Steel with calibration certificate Volume/Capacity 50cc Part Number Certificate K0001800M005
Description Elcometer 1800/5 Density Cup stainless steel Volume/Capacity 100cc Part Number Certificate K0001800M006
Description Elcometer 1800/6 Density Cup stainless steel with calibration certificate Volume/Capacity 100cc ● Certificate supplied as standard.StandardsElcometer 1800 Density CupASTM D 891-B, ASTM D1475, DIN 53217-2, FTMS 141 4183, ISO 2811-1, JIS K 5600-2-4, NBN T22-110, NFT 30-020
Standards in grey have been superseded but are still recognised in some industries.
Part NumbersElcometer 1800 Density Cup-
Elcometer 1800/1 Density Cup Stainless Steel
The Elcometer 1800/1 Density Cup Stainless Steel has a volume/capacity of 50cc.
- Volume/Capacity: 50cc
- Part Number : K0001800M001
- Certification : No Certificate
-
Elcometer 1800/2 Density Cup Stainless Steel with calibration certificate
The Elcometer 1800/2 Density Cup Stainless Steel has a volume/capacity of 50cc and is supplied with a calibration certificate.
- Volume/Capacity: 50cc
- Part Number : K0001800M002
- Certification : Calibration Certificate
-
Elcometer 1800/5 Density Cup stainless steel
The Elcometer 1800/5 Density Cup Stainless Steel has a volume/capacity of 100cc.
- Volume/Capacity: 100cc
- Part Number : K0001800M005
- Certification : No Certificate
-
Elcometer 1800/6 Density Cup stainless steel with calibration certificate
The Elcometer 1800/6 Density Cup Stainless Steel has a volume/capacity of 100cc and is supplied with a calibration certificate.
- Volume/Capacity: 100cc
- Part Number : K0001800M006
- Certification : Calibration Certificate
-
- Standards
-