Elcometer 1620 Cupping Tester
- Industrial Finishing
This robust and user-friendly Elcometer 1620 Cupping Tester is used for assessing the cupping ability of coatings applied to metal sheets up to 1.2mm (0.05”) thick.
- Summary
-
Summary
-
The Elcometer 1620 Cupping Tester has a 27mm (1.06”) diameter hardened steel die in a clamping device and a 20mm (0.79”) diameter punch. A hand-rotated crank and reduction drive moves the punch progressively into the sample.
The Elcometer 1620 Cupping Tester has a digital gauge with an illuminated magnifier to accurately view the resultant damage and provides accurate readings of the cupping depth on an integrated gauge. Direct viewing of the fissures, cracks and tears in the coating of up to 10μm (0.4mil) can be viewed through the supplied x10 illuminated magnifying glass.
-
- Technical Information
-
Technical SpecificationElcometer 1620 Cupping Tester
Part Number Description Gauge Type Certificate K0001620M004 Elcometer 1620 Cupping Tester Digital (mm, mils) 
Dimensions 300 x 240 x 500mm (12 x 10 x 20”) Weight 24kg (53lb) Packing List Elcometer 1620 Cupping Tester, gauge, gauge holder, zero setting sheet, illuminated 10x magnifying glass with magnet and operating instructions. Part Number Description Certificate K0001620M004 Elcometer 1620 Cupping Tester Gauge Type Digital (mm, mils) Dimensions 300 x 240 x 500mm (12 x 10 x 20”) Weight 24kg (53lb) Packing List Elcometer 1620 Cupping Tester, gauge, gauge holder, zero setting sheet, illuminated 10x magnifying glass with magnet and operating instructions. ○ Optional calibration Certificate available.
-
- Standards
-
StandardsElcometer 1620 Cupping Tester
BS 3900 E4, DIN 53156, DIN 53232, ECCA T6, EN 13523-6, ISO 1520, JIS K 5600-5-2, NBN T22-104, NF T30-019
Standards in grey have been superseded but are still recognised in some industries.
-
- Downloads
-
Downloads
-
Elcometer 1620 Cupping Tester Instruction Manual
-
Elcometer 1620 Cupping Tester Datasheet
- Part Numbers
-
Part NumbersElcometer 1620 Cupping Tester
-
Elcometer 1620 Cupping TesterThis robust and user-friendly Elcometer 1620 Cupping Tester is used for assessing the cupping ability of coatings applied to metal sheets up to 1.2mm (0.05”) thick.
- Part Number : K0001620M004
- Certification : No Certificate
- Part Number : K0001620M004C
- Certification : Calibration Certificate
-
-
-
Elcometer 1620 Cupping Tester
- Industrial Finishing
This robust and user-friendly Elcometer 1620 Cupping Tester is used for assessing the cupping ability of coatings applied to metal sheets up to 1.2mm (0.05”) thick.
Summary
Elcometer 1620 Cupping Tester
The Elcometer 1620 Cupping Tester has a 27mm (1.06”) diameter hardened steel die in a clamping device and a 20mm (0.79”) diameter punch. A hand-rotated crank and reduction drive moves the punch progressively into the sample.
The Elcometer 1620 Cupping Tester has a digital gauge with an illuminated magnifier to accurately view the resultant damage and provides accurate readings of the cupping depth on an integrated gauge. Direct viewing of the fissures, cracks and tears in the coating of up to 10μm (0.4mil) can be viewed through the supplied x10 illuminated magnifying glass.
| Part Number | Description | Gauge Type | Certificate |
| K0001620M004 | Elcometer 1620 Cupping Tester | Digital (mm, mils) | |
| Dimensions | 300 x 240 x 500mm (12 x 10 x 20”) | ||
| Weight | 24kg (53lb) | ||
| Packing List | Elcometer 1620 Cupping Tester, gauge, gauge holder, zero setting sheet, illuminated 10x magnifying glass with magnet and operating instructions. | ||
| Part Number | Description | Certificate |
| K0001620M004 | Elcometer 1620 Cupping Tester | |
| Gauge Type | Digital (mm, mils) | |
| Dimensions | 300 x 240 x 500mm (12 x 10 x 20”) | |
| Weight | 24kg (53lb) | |
| Packing List | Elcometer 1620 Cupping Tester, gauge, gauge holder, zero setting sheet, illuminated 10x magnifying glass with magnet and operating instructions. | |
BS 3900 E4, DIN 53156, DIN 53232, ECCA T6, EN 13523-6, ISO 1520, JIS K 5600-5-2, NBN T22-104, NF T30-019
Standards in grey have been superseded but are still recognised in some industries.
-
Elcometer 1620 Cupping Tester
This robust and user-friendly Elcometer 1620 Cupping Tester is used for assessing the cupping ability of coatings applied to metal sheets up to 1.2mm (0.05”) thick.
- Part Number : K0001620M004
- Certification : No Certificate
- Part Number : K0001620M004C
- Certification : Calibration Certificate