Dual Element Transducers

Dual-Element-MTG_1
Dual-Element_1

The Elcometer range of Dual Element Transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.

  • Summary
    • Summary

    • Dual element material thickness transducers are ideal for inspecting metal substrates but can also measure thicknesses of other materials, such as plastic, composites or fibreglass.


  • Key Features
    • Key Features

      Dual Element Transducers

      Dual-Element-Diagram

      A dual element transducer consists of two crystal elements housed in the same casing, separated by an acoustic barrier. One crystal transmits sound energy whilst the other crystal receives any reflected sound energy.

      Frequency and Diameter Disks

      Transducers can be selected by frequency and the size of crystal. Frequency of a transducer is determined by the type of material and expected thickness range. The choice of the crystal size is determined by the access, shape and surface finish of the object to be measured. Each ultrasonic transducer can be easily identified by the disk on the top.

      transducer-frequency

      Dual Element Transducer Characteristics Explained

      Dual Element Transducers denoted as HD/CT (Highly Damped Transducer/ Damped Coating Thickness Transducer) are necessary when using the Echo-Echo ThruPaint™ (E-E) measurement mode. Additionally CT (Damped Coating Thickness Transducer) enables simultaneous coating thickness and material thickness measurement on selected gauge models.

      Special transducers are available for taking thickness measurements on high temperature surfaces.

      Super-Standard

      Super Standard
      High power transducer for increased range and penetration through sound absorbing materials.

      High-damped

      High Damped
      Limiting the duration or decreasing the amplitude of vibrations. For use with EE (ThruPaint™) only.

      composite

      Composite
      High gain transducer for increased power and penetration.

      high-resolution

      High Resolution
      Features increased near surface resolution, ideal for use on thin substrates.

      coating-thickness

      Coating Thickness
      Utilising ThruPaint™ technology these transducers are capable of simultaneous measurement of coating and material thickness.

  • Technical Information
    • Technical Information
      Dual Element Transducers
      Material Thickness Transducers
       
      Part Number Probe Diameter Probe Configuration
      Connector Type Suitable for measuring Suitable for

      Damping1

      ThruPaint™

      Potted right angle

      Microdot

      Cast Iron

      Plastics

      Thin Plastics

      Fibreglass

      Thin Fibreglass

      Steel

      Glass

      Aluminium

      Titanium

      MTG4

      MTG6

      MTG8

      1.00 MHz Dual Element Thickness Transducer
      TXC1M00EP-2 1/2" Right Angle
      S
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      2.25MHz Dual Element Thickness Transducer
      TXC2M25CP-2 1/4" Right Angle
      S
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      TXC2M25EP-2 1/2" Right Angle
      S
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      3.50MHz Dual Element Thickness Transducer
      TXC3M50EP-1 1/2" Right Angle
      S
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      5.00MHz Dual Element Thickness Transducer
      TXC5M00BP-4 3/16" Right Angle
      S
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      TXC5M00CP-4 1/4" Right Angle
      S
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      TXC5M00CP-10 2 1/4" Right Angle
      H
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      TXC5M00CP-8 1/4" Hi Temp
      H
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      TXC5M00EP-3 1/2" Right Angle
      S
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      7.50MHz Dual Element Thickness Transducer
      TXC7M50BP-3 3/16" Right Angle
      S
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      TXC7M50CP-4 1/4" Right Angle
      S
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      TXC7M50CP-6 2 1/4" Right Angle
      H
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      10.0MHz Dual Element Thickness Transducer
      TXC10M0BP-1 3/16" Right Angle
      S
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      TXC10M0CP-4 1/4" Right Angle
      S
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      Corrosion Thickness Transducers
       
      Part Number Probe Diameter Probe Characteristic
      Connector Type Suitable for measuring Suitable for

      Damping1

      ThruPaint™

      Potted

      Microdot

      Lemo

      Top

      Side

      End

      Cast Iron

      Plastics

      Thin Plastics

      Fibreglass

      Thin Fibreglass

      Steel

      Glass

      Aluminium

      Titanium

      CG70

      CG100

      FD700

      1.00 MHz Dual Element Thickness Transducer
      TX1M00EP-2 1/2" Standard
      S
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      TX1M00EP-3 1/2" Composite
      S
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      2.25 MHz Dual Element Thickness Transducer
      TX2M25CP-2 1/4" Standard
      S
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      TX2M25CM-2 1/4" Standard
      S
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      TX2M25EP-2 1/2" Standard
      S
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      5.00 MHz Dual Element Thickness Transducer
      TX5M00BP-4 3/16" Coating Thickness
      CT
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      TX5M00CP-4 1/4" Standard
      S
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      TX5M00CP-10 1/4" Standard
      H
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      TX5M00CP-6 1/4" Coating Thickness
      CT
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      TX5M00CM-3 1/4" Coating Thickness
      CT
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      TX5M00CM-4 1/4" Hi Temp3
      H
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      TX5M00EP-3 1/2" Standard
      S
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      TF5M00F 10mm Short Focus
      S
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      7.50 MHz Dual Element Thickness Transducer
      TX7M50BP-3 3/16" Coating Thickness
      CT
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      TX7M50CP-5 1/4" Coating Thickness
      CT
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      10.00 MHz Dual Element Thickness Transducer
      TX10M0CP-4 1/4" Standard
      S
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      1.00 MHz Dual Element Thickness Transducer
      Part Number TXC1M00EP-2
      Probe Diameter 1/2"
      Probe Configuration Right Angle
      Damping1 S
      ThruPaint™  
      Connector Type
      Potted right angle
      Microdot  
      Suitable for measuring
      Cast Iron
      Plastics
      Thin Plastics  
      Fibreglass
      Thin Fibreglass  
      Steel  
      Glass  
      Aluminium  
      Titanium  
      Suitable for
      MTG4
      MTG6
      MTG8
      2.25MHz Dual Element Thickness Transducer
      Part Number TXC2M25CP-2
      Probe Diameter 1/4"
      Probe Configuration Right Angle
      Damping1 S
      ThruPaint™  
      Connector Type
      Potted right angle
      Microdot  
      Suitable for measuring
      Cast Iron
      Plastics
      Thin Plastics  
      Fibreglass  
      Thin Fibreglass
      Steel  
      Glass  
      Aluminium  
      Titanium  
      Suitable for
      MTG4
      MTG6
      MTG8
      Part Number TXC2M25EP-2
      Probe Diameter 1/2"
      Probe Configuration Right Angle
      Damping1 S
      ThruPaint™  
      Connector Type
      Potted right angle
      Microdot  
      Suitable for measuring
      Cast Iron
      Plastics
      Thin Plastics  
      Fibreglass  
      Thin Fibreglass
      Steel  
      Glass  
      Aluminium  
      Titanium  
      Suitable for
      MTG4
      MTG6
      MTG8
      3.50MHz Dual Element Thickness Transducer
      Part Number TXC3M50EP-1
      Probe Diameter 1/2"
      Probe Configuration Right Angle
      Damping1 S
      ThruPaint™  
      Connector Type
      Potted right angle
      Microdot  
      Suitable for measuring
      Cast Iron
      Plastics
      Thin Plastics  
      Fibreglass  
      Thin Fibreglass
      Steel  
      Glass  
      Aluminium  
      Titanium  
      Suitable for
      MTG4
      MTG6
      MTG8
      5.00MHz Dual Element Thickness Transducer
      Part Number TXC5M00BP-4
      Probe Diameter 3/16"
      Probe Configuration Right Angle
      Damping1 S
      ThruPaint™  
      Connector Type
      Potted right angle
      Microdot  
      Suitable for measuring
      Cast Iron  
      Plastics  
      Thin Plastics
      Fibreglass  
      Thin Fibreglass  
      Steel
      Glass
      Aluminium  
      Titanium  
      Suitable for
      MTG4
      MTG6
      MTG8
      Part Number TXC5M00CP-4
      Probe Diameter 1/4"
      Probe Configuration Right Angle
      Damping1 S
      ThruPaint™  
      Connector Type
      Potted right angle
      Microdot  
      Suitable for measuring
      Cast Iron  
      Plastics  
      Thin Plastics
      Fibreglass  
      Thin Fibreglass  
      Steel
      Glass
      Aluminium  
      Titanium  
      Suitable for
      MTG4
      MTG6
      MTG8
      Part Number TXC5M00CP-10 2
      Probe Diameter 1/4"
      Probe Configuration Right Angle
      Damping1 H
      ThruPaint™
      Connector Type
      Potted right angle
      Microdot  
      Suitable for measuring
      Cast Iron  
      Plastics  
      Thin Plastics
      Fibreglass  
      Thin Fibreglass  
      Steel
      Glass
      Aluminium  
      Titanium  
      Suitable for
      MTG4
      MTG6
      MTG8
      Part Number TXC5M00CP-8
      Probe Diameter 1/4"
      Probe Configuration Hi Temp
      Damping1 H
      ThruPaint™  
      Connector Type
      Potted right angle
      Microdot  
      Suitable for measuring
      Cast Iron  
      Plastics  
      Thin Plastics
      Fibreglass  
      Thin Fibreglass  
      Steel
      Glass
      Aluminium  
      Titanium  
      Suitable for
      MTG4
      MTG6
      MTG8
      Part Number TXC5M00EP-3
      Probe Diameter 1/2"
      Probe Configuration Right Angle
      Damping1 S
      ThruPaint™  
      Connector Type
      Potted right angle
      Microdot  
      Suitable for measuring
      Cast Iron  
      Plastics  
      Thin Plastics
      Fibreglass  
      Thin Fibreglass  
      Steel
      Glass
      Aluminium  
      Titanium  
      Suitable for
      MTG4
      MTG6
      MTG8
      7.50MHz Dual Element Thickness Transducer
      Part Number TXC7M50BP-3
      Probe Diameter 3/16"
      Probe Configuration Right Angle
      Damping1 S
      ThruPaint™  
      Connector Type
      Potted right angle
      Microdot  
      Suitable for measuring
      Cast Iron  
      Plastics  
      Thin Plastics
      Fibreglass  
      Thin Fibreglass  
      Steel
      Glass
      Aluminium
      Titanium  
      Suitable for
      MTG4
      MTG6
      MTG8
      Part Number TXC7M50CP-4
      Probe Diameter 1/4"
      Probe Configuration Right Angle
      Damping1 S
      ThruPaint™  
      Connector Type
      Potted right angle
      Microdot  
      Suitable for measuring
      Cast Iron  
      Plastics  
      Thin Plastics
      Fibreglass  
      Thin Fibreglass  
      Steel
      Glass
      Aluminium
      Titanium  
      Suitable for
      MTG4
      MTG6
      MTG8
      Part Number TXC7M50CP-6 2
      Probe Diameter 1/4"
      Probe Configuration Right Angle
      Damping1 H
      ThruPaint™
      Connector Type
      Potted right angle
      Microdot  
      Suitable for measuring
      Cast Iron  
      Plastics  
      Thin Plastics
      Fibreglass  
      Thin Fibreglass  
      Steel
      Glass
      Aluminium
      Titanium  
      Suitable for
      MTG4
      MTG6
      MTG8
      10.0MHz Dual Element Thickness Transducer
      Part Number TXC10M0BP-1
      Probe Diameter 3/16"
      Probe Configuration Right Angle
      Damping1 S
      ThruPaint™  
      Connector Type
      Potted right angle
      Microdot  
      Suitable for measuring
      Cast Iron  
      Plastics  
      Thin Plastics  
      Fibreglass  
      Thin Fibreglass  
      Steel
      Glass  
      Aluminium
      Titanium
      Suitable for
      MTG4
      MTG6
      MTG8
      Part Number TXC10M0CP-4
      Probe Diameter 1/4"
      Probe Configuration Right Angle
      Damping1 S
      ThruPaint™  
      Connector Type
      Potted right angle
      Microdot  
      Suitable for measuring
      Cast Iron  
      Plastics  
      Thin Plastics  
      Fibreglass  
      Thin Fibreglass  
      Steel
      Glass  
      Aluminium
      Titanium
      Suitable for
      MTG4
      MTG6
      MTG8
      1.00 MHz Dual Element Thickness Transducer
      Part Number TX1M00EP-2
      Probe Diameter 1/2"
      Probe Characteristic Standard
      Damping1 S
      ThruPaint™  
      Connector Type
      Potted
      Microdot  
      Lemo  
      Top  
      Side
      End  
      Suitable for measuring
      Cast Iron
      Plastics
      Thin Plastics
      Fibreglass
      Thin Fibreglass  
      Steel  
      Glass  
      Aluminium  
      Titanium  
      Suitable for
      CG70
      CG100
      FD700
      Part Number TX1M00EP-3
      Probe Diameter 1/2"
      Probe Characteristic Composite
      Damping1 S
      ThruPaint™  
      Connector Type
      Potted
      Microdot  
      Lemo  
      Top  
      Side
      End  
      Suitable for measuring
      Cast Iron
      Plastics
      Thin Plastics
      Fibreglass
      Thin Fibreglass  
      Steel  
      Glass  
      Aluminium  
      Titanium  
      Suitable for
      CG70
      CG100
      FD700
      2.25 MHz Dual Element Thickness Transducer
      Part Number TX2M25CP-2
      Probe Diameter 1/4"
      Probe Characteristic Standard
      Damping1 S
      ThruPaint™  
      Connector Type
      Potted
      Microdot  
      Lemo  
      Top  
      Side
      End  
      Suitable for measuring
      Cast Iron
      Plastics
      Thin Plastics  
      Fibreglass  
      Thin Fibreglass
      Steel  
      Glass  
      Aluminium  
      Titanium  
      Suitable for
      CG70
      CG100
      FD700
      Part Number TX2M25CM-2
      Probe Diameter 1/4"
      Probe Characteristic Standard
      Damping1 S
      ThruPaint™  
      Connector Type
      Potted  
      Microdot
      Lemo  
      Top  
      Side
      End  
      Suitable for measuring
      Cast Iron
      Plastics
      Thin Plastics  
      Fibreglass  
      Thin Fibreglass
      Steel  
      Glass  
      Aluminium  
      Titanium  
      Suitable for
      CG70
      CG100
      FD700
      Part Number TX2M25EP-2
      Probe Diameter 1/2"
      Probe Characteristic Standard
      Damping1 S
      ThruPaint™  
      Connector Type
      Potted
      Microdot  
      Lemo  
      Top  
      Side
      End  
      Suitable for measuring
      Cast Iron
      Plastics
      Thin Plastics  
      Fibreglass  
      Thin Fibreglass
      Steel  
      Glass  
      Aluminium  
      Titanium  
      Suitable for
      CG70
      CG100
      FD700
      5.00 MHz Dual Element Thickness Transducer
      Part Number TX5M00BP-4
      Probe Diameter 3/16"
      Probe Characteristic Coating Thickness
      Damping1 CT
      ThruPaint™
      Connector Type
      Potted
      Microdot  
      Lemo  
      Top  
      Side
      End  
      Suitable for measuring
      Cast Iron  
      Plastics  
      Thin Plastics
      Fibreglass  
      Thin Fibreglass  
      Steel
      Glass
      Aluminium  
      Titanium  
      Suitable for
      CG70
      CG100
      FD700
      Part Number TX5M00CP-4
      Probe Diameter 1/4"
      Probe Characteristic Standard
      Damping1 S
      ThruPaint™  
      Connector Type
      Potted
      Microdot  
      Lemo  
      Top  
      Side
      End  
      Suitable for measuring
      Cast Iron  
      Plastics  
      Thin Plastics
      Fibreglass  
      Thin Fibreglass  
      Steel
      Glass
      Aluminium  
      Titanium  
      Suitable for
      CG70
      CG100
      FD700
      Part Number TX5M00CP-10
      Probe Diameter 1/4"
      Probe Characteristic Standard
      Damping1 H
      ThruPaint™
      Connector Type
      Potted
      Microdot  
      Lemo  
      Top  
      Side
      End  
      Suitable for measuring
      Cast Iron  
      Plastics  
      Thin Plastics
      Fibreglass  
      Thin Fibreglass  
      Steel
      Glass
      Aluminium  
      Titanium  
      Suitable for
      CG70
      CG100
      FD700
      Part Number TX5M00CP-6
      Probe Diameter 1/4"
      Probe Characteristic Coating Thickness
      Damping1 CT
      ThruPaint™
      Connector Type
      Potted
      Microdot  
      Lemo  
      Top  
      Side
      End  
      Suitable for measuring
      Cast Iron  
      Plastics  
      Thin Plastics
      Fibreglass  
      Thin Fibreglass  
      Steel
      Glass
      Aluminium  
      Titanium  
      Suitable for
      CG70
      CG100
      FD700
      Part Number TX5M00CM-3
      Probe Diameter 1/4"
      Probe Characteristic Coating Thickness
      Damping1 CT
      ThruPaint™
      Connector Type
      Potted  
      Microdot
      Lemo  
      Top  
      Side
      End  
      Suitable for measuring
      Cast Iron  
      Plastics  
      Thin Plastics
      Fibreglass  
      Thin Fibreglass  
      Steel
      Glass
      Aluminium  
      Titanium  
      Suitable for
      CG70
      CG100
      FD700
      Part Number TX5M00CM-4
      Probe Diameter 1/4"
      Probe Characteristic Hi Temp3
      Damping1 H
      ThruPaint™
      Connector Type
      Potted  
      Microdot
      Lemo  
      Top
      Side  
      End  
      Suitable for measuring
      Cast Iron  
      Plastics  
      Thin Plastics
      Fibreglass  
      Thin Fibreglass  
      Steel
      Glass
      Aluminium  
      Titanium  
      Suitable for
      CG70
      CG100
      FD700
      Part Number TX5M00EP-3
      Probe Diameter 1/2"
      Probe Characteristic Standard
      Damping1 S
      ThruPaint™  
      Connector Type
      Potted
      Microdot  
      Lemo  
      Top  
      Side
      End  
      Suitable for measuring
      Cast Iron  
      Plastics  
      Thin Plastics
      Fibreglass  
      Thin Fibreglass  
      Steel
      Glass
      Aluminium  
      Titanium  
      Suitable for
      CG70
      CG100
      FD700
      Part Number TF5M00F
      Probe Diameter 10mm
      Probe Characteristic Short Focus
      Damping1 S
      ThruPaint™  
      Connector Type
      Potted  
      Microdot  
      Lemo
      Top  
      Side  
      End  
      Suitable for measuring
      Cast Iron
      Plastics  
      Thin Plastics  
      Fibreglass  
      Thin Fibreglass  
      Steel  
      Glass  
      Aluminium  
      Titanium  
      Suitable for
      CG70  
      CG100  
      FD700  
      7.50 MHz Dual Element Thickness Transducer
      Part Number TX7M50BP-3
      Probe Diameter 3/16"
      Probe Characteristic Coating Thickness
      Damping1 CT
      ThruPaint™
      Connector Type
      Potted
      Microdot  
      Lemo  
      Top  
      Side
      End  
      Suitable for measuring
      Cast Iron  
      Plastics  
      Thin Plastics
      Fibreglass  
      Thin Fibreglass  
      Steel
      Glass
      Aluminium
      Titanium  
      Suitable for
      CG70
      CG100
      FD700
      Part Number TX7M50CP-5
      Probe Diameter 1/4"
      Probe Characteristic Coating Thickness
      Damping1 CT
      ThruPaint™
      Connector Type
      Potted
      Microdot  
      Lemo  
      Top  
      Side
      End  
      Suitable for measuring
      Cast Iron  
      Plastics  
      Thin Plastics
      Fibreglass  
      Thin Fibreglass  
      Steel
      Glass
      Aluminium
      Titanium  
      Suitable for
      CG70
      CG100
      FD700
      10.00 MHz Dual Element Thickness Transducer
      Part Number TX10M0CP-4
      Probe Diameter 1/4"
      Probe Characteristic Standard
      Damping1 S
      ThruPaint™  
      Connector Type
      Potted
      Microdot  
      Lemo  
      Top  
      Side
      End  
      Suitable for measuring
      Cast Iron  
      Plastics  
      Thin Plastics  
      Fibreglass  
      Thin Fibreglass  
      Steel  
      Glass
      Aluminium
      Titanium
      Suitable for
      CG70
      CG100
      FD700
      1 Damping:S - Standard undamped Transducer, CT - Damped Coating Thickness Transducer, H - Highly Damped Transducer
      2To be used for coatings with a thickness of up to 1mm
      3 High temperature probes suitable for measuring 482°C (900°F)
      Please refer to the Data Sheet for a full technical specification of Elcometer Dual Element Transducers
  • Downloads
    • Downloads
      • Elcometer MTG Dual Element Transducer - Datasheet

      • Elcometer CG70 and CG100 Dual Element Transducer - Datasheet

      • Elcometer Ultrasonic Transducer Options - Datasheet

      • Typical Range Of Elcometer MTG/PTG Transducers On Various Materials

      • Dual Element Transducer - Application Guide Part 1

      • Dual Element Transducer - Application Guide Part 2

  • Part Numbers
    • Part Numbers
      Dual Element Transducers
      • 1.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Standard
        • Part Number : TX1M00EP-1
        • Certification : No Certificate
      • 1.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Standard
        • Part Number : TX1M00EP-2
        • Certification : No Certificate
      • 1.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Standard
        • Part Number : TX1M00EM-1
        • Certification : No Certificate
      • 1.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Standard
        • Part Number : TX1M00EM-2
        • Certification : No Certificate
      • 1.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Composite
        • Part Number : TX1M00EP-3
        • Certification : No Certificate
      • 1.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Composite
        • Part Number : TX1M00EL
        • Certification : No Certificate
      • 2.25 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Standard
        • Part Number : TX2M25CP-1
        • Certification : No Certificate
      • 2.25 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Standard
        • Part Number : TX2M25CP-2
        • Certification : No Certificate
      • 2.25 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Standard
        • Part Number : TX2M25CM-1
        • Certification : No Certificate
      • 2.25 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Standard
        • Part Number : TX2M25CM-2
        • Certification : No Certificate
      • 2.25 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Hi Temp
        • Part Number : TX2M25CP-3
        • Certification : No Certificate
      • 2.25 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Hi Temp
        • Part Number : TX2M25CM-3
        • Certification : No Certificate
      • 2.25 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Standard
        • Part Number : TX2M25EP-1
        • Certification : No Certificate
      • 2.25 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Standard
        • Part Number : TX2M25EP-2
        • Certification : No Certificate
      • 2.25 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Standard
        • Part Number : TX2M25EM-1
        • Certification : No Certificate
      • 2.25 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Standard
        • Part Number : TX2M25EM-2
        • Certification : No Certificate
      • 2.25 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Hi Temp
        • Part Number : TX2M25EP-3
        • Certification : No Certificate
      • 2.25 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Hi Temp
        • Part Number : TX2M25EM-3
        • Certification : No Certificate
      • 2.25 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Composite
        • Part Number : TX2M25EP-4
        • Certification : No Certificate
      • 2.25 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Armoured
        • Part Number : TX2M25EL-1
        • Certification : No Certificate
      • 3.50 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Standard
        • Part Number : TX3M50EP-4
        • Certification : No Certificate
      • 3.50 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Coating Thickness
        • Part Number : TX3M50EP-1
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 3/16"
        • Probe Configuration: Standard
        • Part Number : TX5M00BP-2
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 3/16"
        • Probe Configuration: Standard
        • Part Number : TX5M00BP-3
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 3/16"
        • Probe Configuration: Standard
        • Part Number : TX5M00BP-5
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 3/16"
        • Probe Configuration: Standard
        • Part Number : TX5M00BM
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 3/16"
        • Probe Configuration: Low Profile
        • Part Number : TX5M00BP-1
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 3/16"
        • Probe Configuration: Coating Thickness
        • Part Number : TX5M00BP-4
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Standard
        • Part Number : TX5M00CP-3
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Standard
        • Part Number : TX5M00CP-9
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Standard
        • Part Number : TX5M00CP-4
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Standard
        • Part Number : TX5M00CP-10
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Standard
        • Part Number : TX5M00CM-1
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Standard
        • Part Number : TX5M00CM-2
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Standard
        • Part Number : TX5M00CM-9
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Low Profile 1" Wand
        • Part Number : TX5M00CP-1
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Low Profile 9" Wand
        • Part Number : TX5M00CP-2
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Coating Thickness
        • Part Number : TX5M00CP-6
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Coating Thickness
        • Part Number : TX5M00CM-3
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Hi Temp
        • Part Number : TX5M00CP-7
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Hi Temp
        • Part Number : TX5M00CP-8
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Hi Temp
        • Part Number : TX5M00CM-4
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Hi Temp
        • Part Number : TX5M00CM-5
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Standard
        • Part Number : TX5M00EP-2
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Standard
        • Part Number : TX5M00EP-3
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Standard
        • Part Number : TX5M00EP-10
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Standard
        • Part Number : TX5M00EM-1
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Standard
        • Part Number : TX5M00EM-2
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Coating Thickness
        • Part Number : TX5M00EP-4
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Hi Temp
        • Part Number : TX5M00EP-5
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Hi Temp
        • Part Number : TX5M00EM-3
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Hi Temp
        • Part Number : TX5M00EM-4
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Hi Temp
        • Part Number : TX5M00EP-6
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Cylinder Probe - Aluminium
        • Part Number : TX5M00EL-1
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Cylinder Probe - Aluminium
        • Part Number : TX5M00EP-1
        • Certification : No Certificate
      • 7.50 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 3/16"
        • Probe Configuration: Standard
        • Frequency: 7.50MHz
        • Part Number : TX7M50BP-1
        • Certification : No Certificate
      • 7.50 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 3/16"
        • Probe Configuration: Standard
        • Frequency: 7.50MHz
        • Part Number : TX7M50BP-2
        • Certification : No Certificate
      • 7.50 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 3/16"
        • Probe Configuration: Coating Thickness
        • Frequency: 7.50MHz
        • Part Number : TX7M50BP-3
        • Certification : No Certificate
      • 7.50 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Exxon Spec
        • Frequency: 7.50MHz
        • Part Number : TX7M50CP-1
        • Certification : No Certificate
      • 7.50 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Exxon Spec
        • Frequency: 7.50MHz
        • Part Number : TX7M50CP-2
        • Certification : No Certificate
      • 7.50 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Exxon Spec
        • Frequency: 7.50MHz
        • Part Number : TX7M50CM-1
        • Certification : No Certificate
      • 7.50 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Exxon Spec
        • Frequency: 7.50MHz
        • Part Number : TX7M50CM-2
        • Certification : No Certificate
      • 7.50 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: High Resolution
        • Frequency: 7.50MHz
        • Part Number : TX7M50CP-3
        • Certification : No Certificate
      • 7.50 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: High Resolution
        • Frequency: 7.50MHz
        • Part Number : TX7M50CP-4
        • Certification : No Certificate
      • 7.50 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Standard
        • Frequency: 7.50MHz
        • Part Number : TX7M50CP-6
        • Certification : No Certificate
      • 7.50 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Coating Thickness
        • Frequency: 7.50MHz
        • Part Number : TX7M50CP-5
        • Certification : No Certificate
      • 7.50 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: High Resolution
        • Frequency: 7.50MHz
        • Part Number : TX7M50CM-3
        • Certification : No Certificate
      • 7.50 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: High Resolution
        • Frequency: 7.50MHz
        • Part Number : TX7M50CM-4
        • Certification : No Certificate
      • 10.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 3/16"
        • Probe Configuration: Standard
        • Frequency: 10.00MHz
        • Part Number : TX10M0BP-1
        • Certification : No Certificate
      • 10.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 3/16"
        • Probe Configuration: Standard
        • Frequency: 10.00MHz
        • Part Number : TX10M0BP-2
        • Certification : No Certificate
      • 10.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Standard
        • Frequency: 10.00MHz
        • Part Number : TX10M0CP-3
        • Certification : No Certificate
      • 10.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Standard
        • Frequency: 10.00MHz
        • Part Number : TX10M0CP-4
        • Certification : No Certificate
      • 10.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Standard
        • Frequency: 10.00MHz
        • Part Number : TX10M0CM-1
        • Certification : No Certificate
      • 10.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Standard
        • Frequency: 10.00MHz
        • Part Number : TX10M0CM-2
        • Certification : No Certificate
      • 10.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Low Profile 1" Wand
        • Frequency: 10.00MHz
        • Part Number : TX10M0CP-1
        • Certification : No Certificate
      • 10.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Low Profile 9" Wand
        • Frequency: 10.00MHz
        • Part Number : TX10M0CP-2
        • Certification : No Certificate
      • 10.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Standard
        • Frequency: 10.00MHz
        • Part Number : TX10M0EP-2
        • Certification : No Certificate
      • 10.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Standard
        • Frequency: 10.00MHz
        • Part Number : TX10M0EP-3
        • Certification : No Certificate
      • 10.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Standard
        • Frequency: 10.00MHz
        • Part Number : TX10M0EM-1
        • Certification : No Certificate
      • 10.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Standard
        • Frequency: 10.00MHz
        • Part Number : TX10M0EM-2
        • Certification : No Certificate
      • 10.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Cylinder Probe - Aluminium
        • Frequency: 10.00MHz
        • Part Number : TX10M0EP-1
        • Certification : No Certificate
      • 5.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 10mm
        • Probe Configuration: Short Focus
        • Part Number : TF5M00F
        • Certification : No Certificate
      • 1.00 MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Right Angle
        • Part Number : TXC1M00EP-2
        • Certification : No Certificate
      • 10.0MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Right Angle
        • Part Number : TXC10M0BP-1
        • Certification : No Certificate
      • Dual Element Transducers
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Right Angle
        • Part Number : TXC10M0CP-4
        • Certification : No Certificate
      • 2.25MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Right Angle
        • Part Number : TXC2M25CP-2
        • Certification : No Certificate
      • Dual Element Transducers
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Right Angle
        • Part Number : TXC2M25EP-2
        • Certification : No Certificate
      • 3.50MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Right Angle
        • Part Number : TXC3M50EP-1
        • Certification : No Certificate
      • 5.00MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 3/16"
        • Probe Configuration: Right Angle
        • Part Number : TXC5M00BP-4
        • Certification : No Certificate
      • Dual Element Transducers
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Right Angle
        • Part Number : TXC5M00CP-4
        • Certification : No Certificate
      • Dual Element Transducers
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Hi Temp
        • Part Number : TXC5M00CP-8
        • Uncertified No Certification
      • Dual Element Transducers
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/2"
        • Probe Configuration: Right Angle
        • Part Number : TXC5M00EP-3
        • Certification : No Certificate
      • 7.50MHz Dual Element Thickness Transducer
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 3/16"
        • Probe Configuration: Right Angle
        • Part Number : TXC7M50BP-3
        • Certification : No Certificate
      • Dual Element Transducers
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Right Angle
        • Part Number : TXC7M50CP-4
        • Certification : No Certificate
      • Dual Element Transducers
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Right Angle
        • Part Number : TXC7M50CP-6
        • Uncertified No Certification
      • Dual Element Transducers
        The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.
        • Probe Diameter: 1/4"
        • Probe Configuration: Right Angle
        • Part Number : TXC5M00CP-10
        • Certification : No Certificate

Dual Element Transducers

Dual-Element-MTG_1
Dual-Element_1

The Elcometer range of Dual Element Transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.

Summary

Dual Element Transducers

Dual element material thickness transducers are ideal for inspecting metal substrates but can also measure thicknesses of other materials, such as plastic, composites or fibreglass.


Downloads
  • Elcometer MTG Dual Element Transducer - Datasheet

  • Elcometer CG70 and CG100 Dual Element Transducer - Datasheet

  • Elcometer Ultrasonic Transducer Options - Datasheet

  • Typical Range Of Elcometer MTG/PTG Transducers On Various Materials

  • Dual Element Transducer - Application Guide Part 1

  • Dual Element Transducer - Application Guide Part 2

Key Features

Dual Element Transducers

Dual-Element-Diagram

A dual element transducer consists of two crystal elements housed in the same casing, separated by an acoustic barrier. One crystal transmits sound energy whilst the other crystal receives any reflected sound energy.

Frequency and Diameter Disks

Transducers can be selected by frequency and the size of crystal. Frequency of a transducer is determined by the type of material and expected thickness range. The choice of the crystal size is determined by the access, shape and surface finish of the object to be measured. Each ultrasonic transducer can be easily identified by the disk on the top.

transducer-frequency

Dual Element Transducer Characteristics Explained

Dual Element Transducers denoted as HD/CT (Highly Damped Transducer/ Damped Coating Thickness Transducer) are necessary when using the Echo-Echo ThruPaint™ (E-E) measurement mode. Additionally CT (Damped Coating Thickness Transducer) enables simultaneous coating thickness and material thickness measurement on selected gauge models.

Special transducers are available for taking thickness measurements on high temperature surfaces.

Super-Standard

Super Standard
High power transducer for increased range and penetration through sound absorbing materials.

High-damped

High Damped
Limiting the duration or decreasing the amplitude of vibrations. For use with EE (ThruPaint™) only.

composite

Composite
High gain transducer for increased power and penetration.

high-resolution

High Resolution
Features increased near surface resolution, ideal for use on thin substrates.

coating-thickness

Coating Thickness
Utilising ThruPaint™ technology these transducers are capable of simultaneous measurement of coating and material thickness.

Technical Information
Dual Element Transducers
Material Thickness Transducers
 
Part Number Probe Diameter Probe Configuration
Connector Type Suitable for measuring Suitable for

Damping1

ThruPaint™

Potted right angle

Microdot

Cast Iron

Plastics

Thin Plastics

Fibreglass

Thin Fibreglass

Steel

Glass

Aluminium

Titanium

MTG4

MTG6

MTG8

1.00 MHz Dual Element Thickness Transducer
TXC1M00EP-2 1/2" Right Angle
S
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2.25MHz Dual Element Thickness Transducer
TXC2M25CP-2 1/4" Right Angle
S
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TXC2M25EP-2 1/2" Right Angle
S
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
3.50MHz Dual Element Thickness Transducer
TXC3M50EP-1 1/2" Right Angle
S
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
5.00MHz Dual Element Thickness Transducer
TXC5M00BP-4 3/16" Right Angle
S
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TXC5M00CP-4 1/4" Right Angle
S
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TXC5M00CP-10 2 1/4" Right Angle
H
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TXC5M00CP-8 1/4" Hi Temp
H
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TXC5M00EP-3 1/2" Right Angle
S
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
7.50MHz Dual Element Thickness Transducer
TXC7M50BP-3 3/16" Right Angle
S
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TXC7M50CP-4 1/4" Right Angle
S
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TXC7M50CP-6 2 1/4" Right Angle
H
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
10.0MHz Dual Element Thickness Transducer
TXC10M0BP-1 3/16" Right Angle
S
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TXC10M0CP-4 1/4" Right Angle
S
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Corrosion Thickness Transducers
 
Part Number Probe Diameter Probe Characteristic
Connector Type Suitable for measuring Suitable for

Damping1

ThruPaint™

Potted

Microdot

Lemo

Top

Side

End

Cast Iron

Plastics

Thin Plastics

Fibreglass

Thin Fibreglass

Steel

Glass

Aluminium

Titanium

CG70

CG100

FD700

1.00 MHz Dual Element Thickness Transducer
TX1M00EP-2 1/2" Standard
S
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TX1M00EP-3 1/2" Composite
S
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2.25 MHz Dual Element Thickness Transducer
TX2M25CP-2 1/4" Standard
S
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TX2M25CM-2 1/4" Standard
S
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TX2M25EP-2 1/2" Standard
S
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
5.00 MHz Dual Element Thickness Transducer
TX5M00BP-4 3/16" Coating Thickness
CT
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TX5M00CP-4 1/4" Standard
S
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TX5M00CP-10 1/4" Standard
H
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TX5M00CP-6 1/4" Coating Thickness
CT
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TX5M00CM-3 1/4" Coating Thickness
CT
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TX5M00CM-4 1/4" Hi Temp3
H
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TX5M00EP-3 1/2" Standard
S
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TF5M00F 10mm Short Focus
S
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
7.50 MHz Dual Element Thickness Transducer
TX7M50BP-3 3/16" Coating Thickness
CT
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TX7M50CP-5 1/4" Coating Thickness
CT
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
10.00 MHz Dual Element Thickness Transducer
TX10M0CP-4 1/4" Standard
S
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1.00 MHz Dual Element Thickness Transducer
Part Number TXC1M00EP-2
Probe Diameter 1/2"
Probe Configuration Right Angle
Damping1 S
ThruPaint™  
Connector Type
Potted right angle
Microdot  
Suitable for measuring
Cast Iron
Plastics
Thin Plastics  
Fibreglass
Thin Fibreglass  
Steel  
Glass  
Aluminium  
Titanium  
Suitable for
MTG4
MTG6
MTG8
2.25MHz Dual Element Thickness Transducer
Part Number TXC2M25CP-2
Probe Diameter 1/4"
Probe Configuration Right Angle
Damping1 S
ThruPaint™  
Connector Type
Potted right angle
Microdot  
Suitable for measuring
Cast Iron
Plastics
Thin Plastics  
Fibreglass  
Thin Fibreglass
Steel  
Glass  
Aluminium  
Titanium  
Suitable for
MTG4
MTG6
MTG8
Part Number TXC2M25EP-2
Probe Diameter 1/2"
Probe Configuration Right Angle
Damping1 S
ThruPaint™  
Connector Type
Potted right angle
Microdot  
Suitable for measuring
Cast Iron
Plastics
Thin Plastics  
Fibreglass  
Thin Fibreglass
Steel  
Glass  
Aluminium  
Titanium  
Suitable for
MTG4
MTG6
MTG8
3.50MHz Dual Element Thickness Transducer
Part Number TXC3M50EP-1
Probe Diameter 1/2"
Probe Configuration Right Angle
Damping1 S
ThruPaint™  
Connector Type
Potted right angle
Microdot  
Suitable for measuring
Cast Iron
Plastics
Thin Plastics  
Fibreglass  
Thin Fibreglass
Steel  
Glass  
Aluminium  
Titanium  
Suitable for
MTG4
MTG6
MTG8
5.00MHz Dual Element Thickness Transducer
Part Number TXC5M00BP-4
Probe Diameter 3/16"
Probe Configuration Right Angle
Damping1 S
ThruPaint™  
Connector Type
Potted right angle
Microdot  
Suitable for measuring
Cast Iron  
Plastics  
Thin Plastics
Fibreglass  
Thin Fibreglass  
Steel
Glass
Aluminium  
Titanium  
Suitable for
MTG4
MTG6
MTG8
Part Number TXC5M00CP-4
Probe Diameter 1/4"
Probe Configuration Right Angle
Damping1 S
ThruPaint™  
Connector Type
Potted right angle
Microdot  
Suitable for measuring
Cast Iron  
Plastics  
Thin Plastics
Fibreglass  
Thin Fibreglass  
Steel
Glass
Aluminium  
Titanium  
Suitable for
MTG4
MTG6
MTG8
Part Number TXC5M00CP-10 2
Probe Diameter 1/4"
Probe Configuration Right Angle
Damping1 H
ThruPaint™
Connector Type
Potted right angle
Microdot  
Suitable for measuring
Cast Iron  
Plastics  
Thin Plastics
Fibreglass  
Thin Fibreglass  
Steel
Glass
Aluminium  
Titanium  
Suitable for
MTG4
MTG6
MTG8
Part Number TXC5M00CP-8
Probe Diameter 1/4"
Probe Configuration Hi Temp
Damping1 H
ThruPaint™  
Connector Type
Potted right angle
Microdot  
Suitable for measuring
Cast Iron  
Plastics  
Thin Plastics
Fibreglass  
Thin Fibreglass  
Steel
Glass
Aluminium  
Titanium  
Suitable for
MTG4
MTG6
MTG8
Part Number TXC5M00EP-3
Probe Diameter 1/2"
Probe Configuration Right Angle
Damping1 S
ThruPaint™  
Connector Type
Potted right angle
Microdot  
Suitable for measuring
Cast Iron  
Plastics  
Thin Plastics
Fibreglass  
Thin Fibreglass  
Steel
Glass
Aluminium  
Titanium  
Suitable for
MTG4
MTG6
MTG8
7.50MHz Dual Element Thickness Transducer
Part Number TXC7M50BP-3
Probe Diameter 3/16"
Probe Configuration Right Angle
Damping1 S
ThruPaint™  
Connector Type
Potted right angle
Microdot  
Suitable for measuring
Cast Iron  
Plastics  
Thin Plastics
Fibreglass  
Thin Fibreglass  
Steel
Glass
Aluminium
Titanium  
Suitable for
MTG4
MTG6
MTG8
Part Number TXC7M50CP-4
Probe Diameter 1/4"
Probe Configuration Right Angle
Damping1 S
ThruPaint™  
Connector Type
Potted right angle
Microdot  
Suitable for measuring
Cast Iron  
Plastics  
Thin Plastics
Fibreglass  
Thin Fibreglass  
Steel
Glass
Aluminium
Titanium  
Suitable for
MTG4
MTG6
MTG8
Part Number TXC7M50CP-6 2
Probe Diameter 1/4"
Probe Configuration Right Angle
Damping1 H
ThruPaint™
Connector Type
Potted right angle
Microdot  
Suitable for measuring
Cast Iron  
Plastics  
Thin Plastics
Fibreglass  
Thin Fibreglass  
Steel
Glass
Aluminium
Titanium  
Suitable for
MTG4
MTG6
MTG8
10.0MHz Dual Element Thickness Transducer
Part Number TXC10M0BP-1
Probe Diameter 3/16"
Probe Configuration Right Angle
Damping1 S
ThruPaint™  
Connector Type
Potted right angle
Microdot  
Suitable for measuring
Cast Iron  
Plastics  
Thin Plastics  
Fibreglass  
Thin Fibreglass  
Steel
Glass  
Aluminium
Titanium
Suitable for
MTG4
MTG6
MTG8
Part Number TXC10M0CP-4
Probe Diameter 1/4"
Probe Configuration Right Angle
Damping1 S
ThruPaint™  
Connector Type
Potted right angle
Microdot  
Suitable for measuring
Cast Iron  
Plastics  
Thin Plastics  
Fibreglass  
Thin Fibreglass  
Steel
Glass  
Aluminium
Titanium
Suitable for
MTG4
MTG6
MTG8
1.00 MHz Dual Element Thickness Transducer
Part Number TX1M00EP-2
Probe Diameter 1/2"
Probe Characteristic Standard
Damping1 S
ThruPaint™  
Connector Type
Potted
Microdot  
Lemo  
Top  
Side
End  
Suitable for measuring
Cast Iron
Plastics
Thin Plastics
Fibreglass
Thin Fibreglass  
Steel  
Glass  
Aluminium  
Titanium  
Suitable for
CG70
CG100
FD700
Part Number TX1M00EP-3
Probe Diameter 1/2"
Probe Characteristic Composite
Damping1 S
ThruPaint™  
Connector Type
Potted
Microdot  
Lemo  
Top  
Side
End  
Suitable for measuring
Cast Iron
Plastics
Thin Plastics
Fibreglass
Thin Fibreglass  
Steel  
Glass  
Aluminium  
Titanium  
Suitable for
CG70
CG100
FD700
2.25 MHz Dual Element Thickness Transducer
Part Number TX2M25CP-2
Probe Diameter 1/4"
Probe Characteristic Standard
Damping1 S
ThruPaint™  
Connector Type
Potted
Microdot  
Lemo  
Top  
Side
End  
Suitable for measuring
Cast Iron
Plastics
Thin Plastics  
Fibreglass  
Thin Fibreglass
Steel  
Glass  
Aluminium  
Titanium  
Suitable for
CG70
CG100
FD700
Part Number TX2M25CM-2
Probe Diameter 1/4"
Probe Characteristic Standard
Damping1 S
ThruPaint™  
Connector Type
Potted  
Microdot
Lemo  
Top  
Side
End  
Suitable for measuring
Cast Iron
Plastics
Thin Plastics  
Fibreglass  
Thin Fibreglass
Steel  
Glass  
Aluminium  
Titanium  
Suitable for
CG70
CG100
FD700
Part Number TX2M25EP-2
Probe Diameter 1/2"
Probe Characteristic Standard
Damping1 S
ThruPaint™  
Connector Type
Potted
Microdot  
Lemo  
Top  
Side
End  
Suitable for measuring
Cast Iron
Plastics
Thin Plastics  
Fibreglass  
Thin Fibreglass
Steel  
Glass  
Aluminium  
Titanium  
Suitable for
CG70
CG100
FD700
5.00 MHz Dual Element Thickness Transducer
Part Number TX5M00BP-4
Probe Diameter 3/16"
Probe Characteristic Coating Thickness
Damping1 CT
ThruPaint™
Connector Type
Potted
Microdot  
Lemo  
Top  
Side
End  
Suitable for measuring
Cast Iron  
Plastics  
Thin Plastics
Fibreglass  
Thin Fibreglass  
Steel
Glass
Aluminium  
Titanium  
Suitable for
CG70
CG100
FD700
Part Number TX5M00CP-4
Probe Diameter 1/4"
Probe Characteristic Standard
Damping1 S
ThruPaint™  
Connector Type
Potted
Microdot  
Lemo  
Top  
Side
End  
Suitable for measuring
Cast Iron  
Plastics  
Thin Plastics
Fibreglass  
Thin Fibreglass  
Steel
Glass
Aluminium  
Titanium  
Suitable for
CG70
CG100
FD700
Part Number TX5M00CP-10
Probe Diameter 1/4"
Probe Characteristic Standard
Damping1 H
ThruPaint™
Connector Type
Potted
Microdot  
Lemo  
Top  
Side
End  
Suitable for measuring
Cast Iron  
Plastics  
Thin Plastics
Fibreglass  
Thin Fibreglass  
Steel
Glass
Aluminium  
Titanium  
Suitable for
CG70
CG100
FD700
Part Number TX5M00CP-6
Probe Diameter 1/4"
Probe Characteristic Coating Thickness
Damping1 CT
ThruPaint™
Connector Type
Potted
Microdot  
Lemo  
Top  
Side
End  
Suitable for measuring
Cast Iron  
Plastics  
Thin Plastics
Fibreglass  
Thin Fibreglass  
Steel
Glass
Aluminium  
Titanium  
Suitable for
CG70
CG100
FD700
Part Number TX5M00CM-3
Probe Diameter 1/4"
Probe Characteristic Coating Thickness
Damping1 CT
ThruPaint™
Connector Type
Potted  
Microdot
Lemo  
Top  
Side
End  
Suitable for measuring
Cast Iron  
Plastics  
Thin Plastics
Fibreglass  
Thin Fibreglass  
Steel
Glass
Aluminium  
Titanium  
Suitable for
CG70
CG100
FD700
Part Number TX5M00CM-4
Probe Diameter 1/4"
Probe Characteristic Hi Temp3
Damping1 H
ThruPaint™
Connector Type
Potted  
Microdot
Lemo  
Top
Side  
End  
Suitable for measuring
Cast Iron  
Plastics  
Thin Plastics
Fibreglass  
Thin Fibreglass  
Steel
Glass
Aluminium  
Titanium  
Suitable for
CG70
CG100
FD700
Part Number TX5M00EP-3
Probe Diameter 1/2"
Probe Characteristic Standard
Damping1 S
ThruPaint™  
Connector Type
Potted
Microdot  
Lemo  
Top  
Side
End  
Suitable for measuring
Cast Iron  
Plastics  
Thin Plastics
Fibreglass  
Thin Fibreglass  
Steel
Glass
Aluminium  
Titanium  
Suitable for
CG70
CG100
FD700
Part Number TF5M00F
Probe Diameter 10mm
Probe Characteristic Short Focus
Damping1 S
ThruPaint™  
Connector Type
Potted  
Microdot  
Lemo
Top  
Side  
End  
Suitable for measuring
Cast Iron
Plastics  
Thin Plastics  
Fibreglass  
Thin Fibreglass  
Steel  
Glass  
Aluminium  
Titanium  
Suitable for
CG70  
CG100  
FD700  
7.50 MHz Dual Element Thickness Transducer
Part Number TX7M50BP-3
Probe Diameter 3/16"
Probe Characteristic Coating Thickness
Damping1 CT
ThruPaint™
Connector Type
Potted
Microdot  
Lemo  
Top  
Side
End  
Suitable for measuring
Cast Iron  
Plastics  
Thin Plastics
Fibreglass  
Thin Fibreglass  
Steel
Glass
Aluminium
Titanium  
Suitable for
CG70
CG100
FD700
Part Number TX7M50CP-5
Probe Diameter 1/4"
Probe Characteristic Coating Thickness
Damping1 CT
ThruPaint™
Connector Type
Potted
Microdot  
Lemo  
Top  
Side
End  
Suitable for measuring
Cast Iron  
Plastics  
Thin Plastics
Fibreglass  
Thin Fibreglass  
Steel
Glass
Aluminium
Titanium  
Suitable for
CG70
CG100
FD700
10.00 MHz Dual Element Thickness Transducer
Part Number TX10M0CP-4
Probe Diameter 1/4"
Probe Characteristic Standard
Damping1 S
ThruPaint™  
Connector Type
Potted
Microdot  
Lemo  
Top  
Side
End  
Suitable for measuring
Cast Iron  
Plastics  
Thin Plastics  
Fibreglass  
Thin Fibreglass  
Steel  
Glass
Aluminium
Titanium
Suitable for
CG70
CG100
FD700
1 D