Elcometer 331B Covermeter
- Protective Coatings
The easy to use Elcometer 331B Covermeter quickly and accurately locates/orientates reinforcement bars in concrete and measures the depth of cover over the rebar.
- Summary
-
Summary
-
User Friendly
- Locate and determine the orientation of rebar quickly, easily & accurately
- Single handed operation: All functions can be accessed & controlled through 4 simple keys/buttons
- International bar sizes: User selectable bar sizes: Metric, Imperial, ASTM/Canadian and Japanese
- Range of fully interchangeable search heads
A range of fully interchangeable search heads and borehole probes are available to suit the requirements without the need to return your gauge to Elcometer.
There are four types of search heads available for use with the Elcometer 331B; Standard, Narrow Pitch, Deep Cover and Borehole.
The Standard Search Head is designed to meet most of the measurement requirements whereas the Narrow Pitch Search Head accurately measures the cover thickness when the gaps (pitch) between each of the rebars are close together.
The Deep Cover Search Head is ideal for accurately measuring rebars that are deep within the structure. The Borehole Probe is ideal for locating tendon ducts and multiple layers of rebar lying deep within the concrete.
Changing from one type of search head to another is quick and easy; simply switch off the Covermeter, swap search heads, switch on again and zero the Covermeter.
-
- Key Features
-
Key Features
Elcometer 331B Covermeter
How does a Covermeter work?
To identify the location and orientation of the rebar under the surface of the concrete, a search head is connected to the Covermeter and is used to scan across the designated search area of the concrete.
When the search head approaches a reinforcement bar, the LED on the search head will start to glow. The Covermeter will start to emit a sound that will increase in pitch and the signal strength indicator bar on the display will increase in length.
When the bar is positioned below the centre of the search head then the pitch of the sound will be at its highest and the depth of coverage will be shown on the Covermeter display. The signal strength indicator bar is at its maximum.
If the reinforcement bar is too deep to measure, the depth of coverage will be displayed as infinite.
The Elcometer 331B Covermeter is an entry level gauge without memory that is only used to quickly locate and measure the depth of cover over the rebar.
Interchangeable Search Heads & Borehole Probes
A range of fully interchangeable search heads and borehole probes are available to suit the requirements without the need to return your gauge to Elcometer.
There are four types of search heads available for use with the Elcometer 331B; Standard, Narrow Pitch, Deep Cover and Borehole.
The Standard Search Head is designed to meet most of the measurement requirements whereas the Narrow Pitch Search Head accurately measures the cover thickness when the gaps (pitch) between each of the rebars are close together.
The Deep Cover Search Head is ideal for accurately measuring rebars that are deep within the structure. The Borehole Probe is ideal for locating tendon ducts and multiple layers of rebar lying deep within the concrete.
Changing from one type of search head to another is quick and easy; simply switch off the Covermeter, swap search heads, switch on again and zero the Covermeter.
-
- Product Features
-
Product FeaturesElcometer 331B Covermeter
Description Elcometer 331B Covermeter Model B Part Number W331B---4 Covermeter/rebar location Rebar orientation Depth of cover Large cover (thickness) reading mm or inches Large graphics display with backlight Multiple language menu structure Signal strength bar Interchangeable heads with LED & keypad User selectable bar range sizes & numbers Rugged waterproof case (IP65) Adjustable beep volume & earphone socket Measurement sound modes Locate (tone increases as head approaches rebar) - Technical Information
-
Technical SpecificationElcometer 331B Covermeter
Operating temperature 0 to 50°C (32 to 120°F) Power supply 7.4V battery pack provides up to 32 hours of continuous use (20 hours if backlight is on). Rechargeable in 4 hours, using an external charger, either inside or outside the gauge. Dimensions 230 x 130 x 125mm (9 x 5.1 x 4.9") Weight 1.6kg (3.5lb) Packing List Elcometer 331B Covermeter, standard search head & search head connecting cable, rechargeable battery pack & charger (UK, US & EU), earphone, shoulder strap, plastic carry case & operating instructions.
- Standards
-
StandardsElcometer 331B Covermeter
ACI 318, ASTM C876-91, BS1881:201, BS1881:204, BS8110, CP 110, DGZfP:B2, DGZfP:B3, DIN 1045, EC2, SIA 262, SS-EN 206, UNI 10174, Concrete Society Technical Report 60
Standards in grey have been superseded but are still recognised in some industries.
- Downloads
-
- Part Numbers
-
Part NumbersElcometer 331B CovermeterNo data found!!
-
Elcometer 331B Covermeter
- Part Number : W331B---4
-
- Home
- Concrete Inspection
- Concrete Inspection
- Elcometer 331B Covermeter
Elcometer 331B Covermeter
- Protective Coatings
The easy to use Elcometer 331B Covermeter quickly and accurately locates/orientates reinforcement bars in concrete and measures the depth of cover over the rebar.
User Friendly
- Locate and determine the orientation of rebar quickly, easily & accurately
- Single handed operation: All functions can be accessed & controlled through 4 simple keys/buttons
- International bar sizes: User selectable bar sizes: Metric, Imperial, ASTM/Canadian and Japanese
- Range of fully interchangeable search heads
Summary
Elcometer 331B Covermeter
A range of fully interchangeable search heads and borehole probes are available to suit the requirements without the need to return your gauge to Elcometer.
There are four types of search heads available for use with the Elcometer 331B; Standard, Narrow Pitch, Deep Cover and Borehole.
The Standard Search Head is designed to meet most of the measurement requirements whereas the Narrow Pitch Search Head accurately measures the cover thickness when the gaps (pitch) between each of the rebars are close together.
The Deep Cover Search Head is ideal for accurately measuring rebars that are deep within the structure. The Borehole Probe is ideal for locating tendon ducts and multiple layers of rebar lying deep within the concrete.
Changing from one type of search head to another is quick and easy; simply switch off the Covermeter, swap search heads, switch on again and zero the Covermeter.
Key Features
Elcometer 331B Covermeter
How does a Covermeter work?
To identify the location and orientation of the rebar under the surface of the concrete, a search head is connected to the Covermeter and is used to scan across the designated search area of the concrete.
When the search head approaches a reinforcement bar, the LED on the search head will start to glow. The Covermeter will start to emit a sound that will increase in pitch and the signal strength indicator bar on the display will increase in length.
When the bar is positioned below the centre of the search head then the pitch of the sound will be at its highest and the depth of coverage will be shown on the Covermeter display. The signal strength indicator bar is at its maximum.
If the reinforcement bar is too deep to measure, the depth of coverage will be displayed as infinite.
The Elcometer 331B Covermeter is an entry level gauge without memory that is only used to quickly locate and measure the depth of cover over the rebar.
Interchangeable Search Heads & Borehole Probes
A range of fully interchangeable search heads and borehole probes are available to suit the requirements without the need to return your gauge to Elcometer.
There are four types of search heads available for use with the Elcometer 331B; Standard, Narrow Pitch, Deep Cover and Borehole.
The Standard Search Head is designed to meet most of the measurement requirements whereas the Narrow Pitch Search Head accurately measures the cover thickness when the gaps (pitch) between each of the rebars are close together.
The Deep Cover Search Head is ideal for accurately measuring rebars that are deep within the structure. The Borehole Probe is ideal for locating tendon ducts and multiple layers of rebar lying deep within the concrete.
Changing from one type of search head to another is quick and easy; simply switch off the Covermeter, swap search heads, switch on again and zero the Covermeter.
Product FeaturesElcometer 331B CovermeterDescription Elcometer 331B Covermeter Model B Part Number W331B---4 Covermeter/rebar location Rebar orientation Depth of cover Large cover (thickness) reading mm or inches Large graphics display with backlight Multiple language menu structure Signal strength bar Interchangeable heads with LED & keypad User selectable bar range sizes & numbers Rugged waterproof case (IP65) Adjustable beep volume & earphone socket Measurement sound modes Locate (tone increases as head approaches rebar) Technical SpecificationElcometer 331B CovermeterOperating temperature 0 to 50°C (32 to 120°F) Power supply 7.4V battery pack provides up to 32 hours of continuous use (20 hours if backlight is on). Rechargeable in 4 hours, using an external charger, either inside or outside the gauge. Dimensions 230 x 130 x 125mm (9 x 5.1 x 4.9") Weight 1.6kg (3.5lb) Packing List Elcometer 331B Covermeter, standard search head & search head connecting cable, rechargeable battery pack & charger (UK, US & EU), earphone, shoulder strap, plastic carry case & operating instructions. StandardsElcometer 331B CovermeterACI 318, ASTM C876-91, BS1881:201, BS1881:204, BS8110, CP 110, DGZfP:B2, DGZfP:B3, DIN 1045, EC2, SIA 262, SS-EN 206, UNI 10174, Concrete Society Technical Report 60
Standards in grey have been superseded but are still recognised in some industries.
Part NumbersElcometer 331B CovermeterNo data found!!-
Elcometer 331B Covermeter
- Part Number : W331B---4
- Part Numbers
- Technical Information
-