Flat Surface Profile Probes
- Protective Coatings
The Elcometer Flat Surface Profile Probes are designed for use with the Elcometer 224 Digital Surface Profile Gauge.
- Summary
-
Summary
-
Supplied with either standard cables or armoured metal reinforced heavy duty cables, Elcometer surface profile probes are supplied with a glass zero tile, calibration test foils (nominal values 125μm (5.0mils) & 508μm (20mils)) and an Elcometer test certificate.
-
- Technical Information
-
Technical SpecificationFlat Surface Profile Probes
Range : 0-500μm (0-20mils) Resolution : 1μm (0.1mil); Accuracy3 : ±5% or ±5μm (±0.2mil) Probe Design Part Number Minimum Headroom Minimum Sample Diameter Certificate Flat Surface: Standard T224C500US 125mm (4.92”) 25mm (1.0”) 
Flat Surface: Armoured T224C500UARM 165mm (6.50”) 25mm (1.0”) Part Number T224C500US Probe Design Flat Surface: Standard Certificate Minimum Headroom 125mm (4.92”) Minimum Sample Diameter 25mm (1.0”) Part Number T224C500UARM Probe Design Flat Surface: Armoured Certificate Minimum Headroom 165mm (6.50”) Minimum Sample Diameter 25mm (1.0”) Range 0-500μm (0-20mils) Resolution 1μm (0.1mil); Accuracy3 ±5% or ±5μm (±0.2mil) ● Test Certificate supplied as standard.
Elcometer 224 probes are covered by a 1 year warranty
-
- Downloads
-
Downloads
-
Elcometer 224 Digital Surface Profile Gauge Multi-Lingual Instruction Manual
-
Elcometer 224 Convex Surface Profile Probe Multi-Lingual Instruction Manual
-
Elcometer 224 Digital Surface Profile Gauge Datasheet
-
Elcometer 224 Model B Digital Surface Profile Gauge Declaration of Conformity
-
Elcometer 224 Model T Digital Surface Profile Gauge Declaration of Conformity
- Part Numbers
-
Part NumbersFlat Surface Profile Probes
-
Flat Surface Profile Probes: Standard Cable- Part Number : T224C500US
-
Flat Surface Profile Probes: Armoured Cable- Part Number : T224C500UARM
-
Flat Surface Profile Probes
- Protective Coatings
The Elcometer Flat Surface Profile Probes are designed for use with the Elcometer 224 Digital Surface Profile Gauge.
Summary
Flat Surface Profile Probes
Supplied with either standard cables or armoured metal reinforced heavy duty cables, Elcometer surface profile probes are supplied with a glass zero tile, calibration test foils (nominal values 125μm (5.0mils) & 508μm (20mils)) and an Elcometer test certificate.
Downloads-
Elcometer 224 Digital Surface Profile Gauge Multi-Lingual Instruction Manual
-
Elcometer 224 Convex Surface Profile Probe Multi-Lingual Instruction Manual
-
Elcometer 224 Digital Surface Profile Gauge Datasheet
-
Elcometer 224 Model B Digital Surface Profile Gauge Declaration of Conformity
-
Elcometer 224 Model T Digital Surface Profile Gauge Declaration of Conformity
Technical SpecificationFlat Surface Profile ProbesRange : 0-500μm (0-20mils) Resolution : 1μm (0.1mil); Accuracy3 : ±5% or ±5μm (±0.2mil) Probe Design Part Number Minimum Headroom Minimum Sample Diameter Certificate Flat Surface: Standard T224C500US 125mm (4.92”) 25mm (1.0”) Flat Surface: Armoured T224C500UARM 165mm (6.50”) 25mm (1.0”) Part Number T224C500US Probe Design Flat Surface: Standard Certificate Minimum Headroom 125mm (4.92”) Minimum Sample Diameter 25mm (1.0”) Part Number T224C500UARM Probe Design Flat Surface: Armoured Certificate Minimum Headroom 165mm (6.50”) Minimum Sample Diameter 25mm (1.0”) Range 0-500μm (0-20mils) Resolution 1μm (0.1mil); Accuracy3 ±5% or ±5μm (±0.2mil) ● Test Certificate supplied as standard.
Elcometer 224 probes are covered by a 1 year warrantyPart NumbersFlat Surface Profile Probes-
Flat Surface Profile Probes: Standard Cable
- Part Number : T224C500US
-
Flat Surface Profile Probes: Armoured Cable
- Part Number : T224C500UARM
-
-