Convex Surface Profile Probes
- Protective Coatings
Elcometer Convex Surface Profile Probes are designed for use with Elcometer 224 Digital Surface Profile Gauge.
- Summary
-
Summary
-
Supplied with either standard cables or armoured metal reinforced heavy duty cables, Elcometer convex surface profile probes are supplied with a glass zero tile, calibration test foils (nominal values 125μm (5.0mils) & 508μm (20mils)) and an Elcometer test certificate.
-
- Technical Information
-
Technical SpecificationConvex Surface Profile Probes
Range : 0-500μm (0-20mils) Resolution : 1μm (0.1mil); Accuracy3 : ±5% or ±5μm (±0.2mil) Probe Design Part Number Minimum Headroom Minimum Pipe Diameter Certificate Convex Surface: Standard* T224C500UX 135mm (5.31”) 75mm (3.0”) 
Convex Surface: Armoured* T224C500UXARM 175mm (6.89”) 75mm (3.0”) Part Number T224C500UX Probe Design Convex Surface: Standard* Certificate Minimum Headroom 135mm (5.31”) Minimum Pipe Diameter 75mm (3.0”) Part Number T224C500UXARM Probe Design Convex Surface: Armoured* Certificate Minimum Headroom 175mm (6.89”) Minimum Pipe Diameter 75mm (3.0”) Range 0-500μm (0-20mils) Resolution 1μm (0.1mil); Accuracy3 ±5% or ±5μm (±0.2mil) ● Test Certificate supplied as standard
* Applicable Patents: GB2505193, US9261345
Elcometer 224 probes are covered by a 1 year warranty
-
- Downloads
-
Downloads
-
Elcometer 224 Digital Surface Profile Gauge Multi-Lingual Instruction Manual
-
Elcometer 224 Convex Surface Profile Probe Multi-Lingual Instruction Manual
-
Elcometer 224 Digital Surface Profile Gauge Datasheet
-
Elcometer 224 Model B Digital Surface Profile Gauge Declaration of Conformity
-
Elcometer 224 Model T Digital Surface Profile Gauge Declaration of Conformity
- Part Numbers
-
Part NumbersConvex Surface Profile Probes
-
Convex Surface Profile Probe: Standard Cable- Part Number : T224C500UX
-
Convex Surface Profile Probe: Armoured Cable- Part Number : T224C500UXARM
-
Convex Surface Profile Probes
- Protective Coatings
Elcometer Convex Surface Profile Probes are designed for use with Elcometer 224 Digital Surface Profile Gauge.
Summary
Convex Surface Profile Probes
Supplied with either standard cables or armoured metal reinforced heavy duty cables, Elcometer convex surface profile probes are supplied with a glass zero tile, calibration test foils (nominal values 125μm (5.0mils) & 508μm (20mils)) and an Elcometer test certificate.
Downloads-
Elcometer 224 Digital Surface Profile Gauge Multi-Lingual Instruction Manual
-
Elcometer 224 Convex Surface Profile Probe Multi-Lingual Instruction Manual
-
Elcometer 224 Digital Surface Profile Gauge Datasheet
-
Elcometer 224 Model B Digital Surface Profile Gauge Declaration of Conformity
-
Elcometer 224 Model T Digital Surface Profile Gauge Declaration of Conformity
Technical SpecificationConvex Surface Profile ProbesRange : 0-500μm (0-20mils) Resolution : 1μm (0.1mil); Accuracy3 : ±5% or ±5μm (±0.2mil) Probe Design Part Number Minimum Headroom Minimum Pipe Diameter Certificate Convex Surface: Standard* T224C500UX 135mm (5.31”) 75mm (3.0”) Convex Surface: Armoured* T224C500UXARM 175mm (6.89”) 75mm (3.0”) Part Number T224C500UX Probe Design Convex Surface: Standard* Certificate Minimum Headroom 135mm (5.31”) Minimum Pipe Diameter 75mm (3.0”) Part Number T224C500UXARM Probe Design Convex Surface: Armoured* Certificate Minimum Headroom 175mm (6.89”) Minimum Pipe Diameter 75mm (3.0”) Range 0-500μm (0-20mils) Resolution 1μm (0.1mil); Accuracy3 ±5% or ±5μm (±0.2mil) ● Test Certificate supplied as standard
* Applicable Patents: GB2505193, US9261345
Elcometer 224 probes are covered by a 1 year warrantyPart NumbersConvex Surface Profile Probes-
Convex Surface Profile Probe: Standard Cable
- Part Number : T224C500UX
-
Convex Surface Profile Probe: Armoured Cable
- Part Number : T224C500UXARM
-
-