Elcometer 1537 ISO Scratching Tool
- Industrial Finishing
The Elcometer 1537 ISO Scratching Tool is a simple but effective instrument that is used to scratch the surface of samples in preparation for adhesion, salt spray and corrosion tests.
- Summary
-
Summary
-
The tool is held horizontally and pulled across the sample to produce the scratch.
The Elcometer 1537 has a tungsten carbide blade which is set to give a 90° cutting angle with a 75° cutting edge.
Certificate of Conformity available upon request.
-
- Technical Information
-
Technical SpecificationElcometer 1537 ISO Scratching Tool
Part Number Description Certificate K0001537M001 Elcometer 1537 ISO Scratching Tool 
Dimensions 200 x 45 x 20mm (7.8 x 1.7 x 0.8”) Weight 100g (3.5oz) Packing List Elcometer 1537 ISO Scratching Tool, operating instructions ○ Optional Certificate of Conformity Available
-
- Standards
-
StandardsElcometer 1537 ISO Scratching Tool
BS 7479, EN 22063, ISO 2063, ISO 7253, ISO 9227, NF A91-124
Standards in grey have been superseded but are still recognised in some industries.
-
- Downloads
-
Downloads
-
Elcometer 1537 ISO Scratching Tool Instruction Manual
-
Elcometer 1537 ISO Scratching Tool Datasheet
- Part Numbers
-
Part NumbersElcometer 1537 ISO Scratching Tool
-
Elcometer 1537 ISO Scratching ToolThe Elcometer 1537 has a tungsten carbide blade which is set to give a 90° cutting angle with a 75° cutting edge.
- Part Number : K0001537M001
- Certification : No Certificate
- Part Number : K0001537M001C
- Certification : Certificate of Conformity
-
-
-
Elcometer 1537 ISO Scratching Tool
- Industrial Finishing
The Elcometer 1537 ISO Scratching Tool is a simple but effective instrument that is used to scratch the surface of samples in preparation for adhesion, salt spray and corrosion tests.
Summary
Elcometer 1537 ISO Scratching Tool
The tool is held horizontally and pulled across the sample to produce the scratch.
The Elcometer 1537 has a tungsten carbide blade which is set to give a 90° cutting angle with a 75° cutting edge.
Certificate of Conformity available upon request.
-
Elcometer 1537 ISO Scratching Tool Instruction Manual
-
Elcometer 1537 ISO Scratching Tool Datasheet
| Part Number | Description | Certificate |
| K0001537M001 | Elcometer 1537 ISO Scratching Tool | |
| Dimensions | 200 x 45 x 20mm (7.8 x 1.7 x 0.8”) | |
| Weight | 100g (3.5oz) | |
| Packing List | Elcometer 1537 ISO Scratching Tool, operating instructions | |
BS 7479, EN 22063, ISO 2063, ISO 7253, ISO 9227, NF A91-124
Standards in grey have been superseded but are still recognised in some industries.
-
Elcometer 1537 ISO Scratching Tool
The Elcometer 1537 has a tungsten carbide blade which is set to give a 90° cutting angle with a 75° cutting edge.
- Part Number : K0001537M001
- Certification : No Certificate
- Part Number : K0001537M001C
- Certification : Certificate of Conformity