Elcometer 155 Uncured Powder Film Comb

  • Industrial Finishing
155-intro-image1
155-intro-image

Available in four scale ranges, the Elcometer 155 Uncured Powder Film Comb is designed to measure uncured powder coating film thickness.

  • Summary
    • Summary

    • This enables the application system to be set up and fine tuned prior to the curing process. In turn, this will reduce the amount of scrap and over-spray.

      Place the comb into the powder and slide the comb along the surface. The measurement points (or teeth) are pointed and allow the powder to flow around them.

      The thickness of the powder lies between the highest value where a drag mark is visible and the lowest value where a drag mark has not been produced.

      Note: The thickness of a coating prior to cure is not the same value after curing but there is a correlation. The powder comb is suitable as a guide only.

  • Technical Information
    • Technical Specification
      Elcometer 155 Uncured Powder Film Comb
      Part Number Description Accuracy Certificate
      B15513573-5 Elcometer 155 Metric Powder Film Comb 50 - 225μm
      Optional Calibration Certificate available
      B15513573-6 Elcometer 155 Metric Powder Film Comb 225 - 1,250μm
      Optional Calibration Certificate available
      B15513573-1 Elcometer 155 Imperial Powder Film Comb 2 - 9mils
      Optional Calibration Certificate available
      B15513573-2 Elcometer 155 Imperial Powder Film Comb 9 - 50mils
      Optional Calibration Certificate available
      B15513573-10 Elcometer 155 Uncured Powder Film Metric Comb Set (2 combs) 50 - 225μm and 225 - 1250μm
      Optional Calibration Certificate available
      B15513573-9 Elcometer 155 Uncured Powder Film Imperial Comb Set (2 combs) 2 - 9mils and 9 - 50mils
      Optional Calibration Certificate available
      Accuracy ±5μm (±0.2mil)
      Dimensions 38mm x 46mm (1.5 x 1.8”)
      Weight 18g (0.6oz)
      Packing List Elcometer 155 Powder Comb and powder comb wallet for two combs
      Part Number Accuracy Certificate
      B15513573-5 50 - 225μm
      Optional Calibration Certificate available
      Description Elcometer 155 Metric Powder Film Comb
      B15513573-6 225 - 1,250μm
      Optional Calibration Certificate available
      Description Elcometer 155 Metric Powder Film Comb
      B15513573-1 2 - 9mils
      Optional Calibration Certificate available
      Description Elcometer 155 Imperial Powder Film Comb
      B15513573-2 9 - 50mils
      Optional Calibration Certificate available
      Description Elcometer 155 Imperial Powder Film Comb
      B15513573-10 50 - 225μm and 225 - 1250μm
      Optional Calibration Certificate available
      Description Elcometer 155 Uncured Powder Film Metric Comb Set (2 combs)
      B15513573-9 2 - 9mils and 9 - 50mils
      Optional Calibration Certificate available
      Description Elcometer 155 Uncured Powder Film Imperial Comb Set (2 combs)
      Accuracy ±5μm (±0.2mil)
      Dimensions 38mm x 46mm (1.5 x 1.8”)
      Weight 18g (0.6oz)
      Packing List Elcometer 155 Powder Comb and powder comb wallet for two combs
      * The Elcometer 155 is not available for sale in the USA
      Optional Calibration Certificate available.
  • Standards
    • Standards
      Elcometer 155 Uncured Powder Film Comb

      ASTM D7378-A

  • Downloads
    • Downloads
      • Elcometer 155 Uncured Powder Film Comb Datasheet

  • Part Numbers
    • Part Numbers
      Elcometer 155 Uncured Powder Film Comb
      • Elcometer 155 Metric Powder Film Comb

        The Elcometer 155 is designed to measure the uncured powder coating film thickness.

        • Range: 50 - 225μm
        • Part Number : B15513573-5
        • Certification : No Certificate
      • Elcometer 155 Metric Powder Film Comb

        The Elcometer 155 is designed to measure the uncured powder coating film thickness.

        • Range: 225 - 1,250μm
        • Part Number : B15513573-6
        • Certification : No Certificate
      • Elcometer 155 Imperial Powder Film Comb

        The Elcometer 155 is designed to measure the uncured powder coating film thickness.

        • Range: 2 - 9mils
        • Part Number : B15513573-1
        • Certification : No Certificate
      • Elcometer 155 Imperial Powder Film Comb

        The Elcometer 155 is designed to measure the uncured powder coating film thickness.

        • Range: 9 - 50mils
        • Part Number : B15513573-2
        • Certification : No Certificate
      • Elcometer 155 Uncured Powder Film Metric Comb Set (2 combs)

        The Elcometer 155 is designed to measure the uncured powder coating film thickness.

        • Range: 50 - 225μm and 225 - 1250μm
        • Part Number : B15513573-10
        • Certification : No Certificate
      • Elcometer 155 Uncured Powder Film Imperial Comb Set (2 combs)

        The Elcometer 155 is designed to measure the uncured powder coating film thickness.

        • Range: 2 - 9mils and 9 - 50mils
        • Part Number : B15513573-9
        • Certification : No Certificate

Elcometer 155 Uncured Powder Film Comb

  • Industrial Finishing
155-intro-image1
155-intro-image

Available in four scale ranges, the Elcometer 155 Uncured Powder Film Comb is designed to measure uncured powder coating film thickness.

Summary

Elcometer 155 Uncured Powder Film Comb

This enables the application system to be set up and fine tuned prior to the curing process. In turn, this will reduce the amount of scrap and over-spray.

Place the comb into the powder and slide the comb along the surface. The measurement points (or teeth) are pointed and allow the powder to flow around them.

The thickness of the powder lies between the highest value where a drag mark is visible and the lowest value where a drag mark has not been produced.

Note: The thickness of a coating prior to cure is not the same value after curing but there is a correlation. The powder comb is suitable as a guide only.

Downloads
  • Elcometer 155 Uncured Powder Film Comb Datasheet

Technical Specification
Elcometer 155 Uncured Powder Film Comb
Part Number Description Accuracy Certificate
B15513573-5 Elcometer 155 Metric Powder Film Comb 50 - 225μm
Optional Calibration Certificate available
B15513573-6 Elcometer 155 Metric Powder Film Comb 225 - 1,250μm
Optional Calibration Certificate available
B15513573-1 Elcometer 155 Imperial Powder Film Comb 2 - 9mils
Optional Calibration Certificate available
B15513573-2 Elcometer 155 Imperial Powder Film Comb 9 - 50mils
Optional Calibration Certificate available
B15513573-10 Elcometer 155 Uncured Powder Film Metric Comb Set (2 combs) 50 - 225μm and 225 - 1250μm
Optional Calibration Certificate available
B15513573-9 Elcometer 155 Uncured Powder Film Imperial Comb Set (2 combs) 2 - 9mils and 9 - 50mils
Optional Calibration Certificate available
Accuracy ±5μm (±0.2mil)
Dimensions 38mm x 46mm (1.5 x 1.8”)
Weight 18g (0.6oz)
Packing List Elcometer 155 Powder Comb and powder comb wallet for two combs
Part Number Accuracy Certificate
B15513573-5 50 - 225μm
Optional Calibration Certificate available
Description Elcometer 155 Metric Powder Film Comb
B15513573-6 225 - 1,250μm
Optional Calibration Certificate available
Description Elcometer 155 Metric Powder Film Comb
B15513573-1 2 - 9mils
Optional Calibration Certificate available
Description Elcometer 155 Imperial Powder Film Comb
B15513573-2 9 - 50mils
Optional Calibration Certificate available
Description Elcometer 155 Imperial Powder Film Comb
B15513573-10 50 - 225μm and 225 - 1250μm
Optional Calibration Certificate available
Description Elcometer 155 Uncured Powder Film Metric Comb Set (2 combs)
B15513573-9 2 - 9mils and 9 - 50mils
Optional Calibration Certificate available
Description Elcometer 155 Uncured Powder Film Imperial Comb Set (2 combs)
Accuracy ±5μm (±0.2mil)
Dimensions 38mm x 46mm (1.5 x 1.8”)
Weight 18g (0.6oz)
Packing List Elcometer 155 Powder Comb and powder comb wallet for two combs
* The Elcometer 155 is not available for sale in the USA
Optional Calibration Certificate available.
Standards
Elcometer 155 Uncured Powder Film Comb

ASTM D7378-A

Part Numbers
Elcometer 155 Uncured Powder Film Comb
  • Elcometer 155 Metric Powder Film Comb

    The Elcometer 155 is designed to measure the uncured powder coating film thickness.

    • Range: 50 - 225μm
    • Part Number : B15513573-5
    • Certification : No Certificate
  • Elcometer 155 Metric Powder Film Comb

    The Elcometer 155 is designed to measure the uncured powder coating film thickness.

    • Range: 225 - 1,250μm
    • Part Number : B15513573-6
    • Certification : No Certificate
  • Elcometer 155 Imperial Powder Film Comb

    The Elcometer 155 is designed to measure the uncured powder coating film thickness.

    • Range: 2 - 9mils
    • Part Number : B15513573-1
    • Certification : No Certificate
  • Elcometer 155 Imperial Powder Film Comb

    The Elcometer 155 is designed to measure the uncured powder coating film thickness.

    • Range: 9 - 50mils
    • Part Number : B15513573-2
    • Certification : No Certificate
  • Elcometer 155 Uncured Powder Film Metric Comb Set (2 combs)

    The Elcometer 155 is designed to measure the uncured powder coating film thickness.

    • Range: 50 - 225μm and 225 - 1250μm
    • Part Number : B15513573-10
    • Certification : No Certificate
  • Elcometer 155 Uncured Powder Film Imperial Comb Set (2 combs)

    The Elcometer 155 is designed to measure the uncured powder coating film thickness.

    • Range: 2 - 9mils and 9 - 50mils
    • Part Number : B15513573-9
    • Certification : No Certificate