Elcometer 2410 Viscosity Cup Standard Calibration Oils

  • Protective Coatings
  • Industrial Finishing
  • Laboratory & Physical Test
Elcometer-Viscosity-Cup-Calibration-Oils_1

The Elcometer 2410 Viscosity Cup Standard Calibration Oils are used to check the viscosity cup's calibration and certify it for ISO purposes.

  • Summary
    • Summary

    • Standard oils have a specific drain time, dependent upon the viscosity cup type (Ford, Shell, Zahn etc.) and the orifice or cup number used.

      To check the viscosity cup, use the standard viscosity oils in place of the liquid and measure the drain time.

      Specific calibration oils can only be used with specific flow and dip cups. Please use the table below to determine which calibration oil is required with each cup, or contact Elcometer. Viscosity oils are supplied in ½ litre (1 pint) bottles.

  • Technical Information
    • Technical Specification
      Elcometer 2410 Viscosity Cup Standard Calibration Oils
       
      Part Number
      Suitable for Dip Cups Suitable for Flow Cups

      Zahn

      DIN Frikmar

      AASTM/FORD Frikmar

      ISO Frikmar

      Shell

      DIN

      ASTM/FORD

      ISO

       
      Kinematic Viscosity at 25°C (77°F)* Certificate
      K0002410M021
      1 3 2 2 3
      34cSt
      Calibration Certificate supplied as standard
      K0002410M022
      2 4 4 4 4 3 4
      120cSt
      Calibration Certificate supplied as standard
      K0002410M023
      3 4 4 6 5 4 4 6
      230cSt
      Calibration Certificate supplied as standard
      K0002410M024
      4 4 6 6 4 4 6
      420cSt
      Calibration Certificate supplied as standard
      K0002410M025
      5 4
      710cSt
      Calibration Certificate supplied as standard
      K0002410M026
      6 4
      1,200cSt
      Calibration Certificate supplied as standard
      Part Number Certificate
      K0002410M021
      Calibration Certificate supplied as standard
      Kinematic Viscosity at 25°C (77°F)* 34cSt
      Suitable for Dip Cups Zahn 1
      DIN Frikmar
      ASTM/FORD Frikmar
      ISO Frikmar 3
      Shell 2
      Suitable for Flow Cups DIN
      ASTM/FORD 2
      ISO 3
      Part Number Certificate
      K0002410M022
      Calibration Certificate supplied as standard
      Kinematic Viscosity at 25°C (77°F)* 120cSt
      Suitable for Dip Cups Zahn 2
      DIN Frikmar 4
      ASTM/FORD Frikmar
      ISO Frikmar 4
      Shell 4
      Suitable for Flow Cups DIN 4
      ASTM/FORD 3
      ISO 4
      Part Number Certificate
      K0002410M023
      Calibration Certificate supplied as standard
      Kinematic Viscosity at 25°C (77°F)* 230cSt
      Suitable for Dip Cups Zahn 3
      DIN Frikmar 4
      ASTM/FORD Frikmar 4
      ISO Frikmar 6
      Shell 5
      Suitable for Flow Cups DIN 4
      ASTM/FORD 4
      ISO 6
      Part Number Certificate
      K0002410M024
      Calibration Certificate supplied as standard
      Kinematic Viscosity at 25°C (77°F)* 420cSt
      Suitable for Dip Cups Zahn 4
      DIN Frikmar 4
      ASTM/FORD Frikmar
      ISO Frikmar 6
      Shell 6
      Suitable for Flow Cups DIN 4
      ASTM/FORD 4
      ISO 6
      Part Number Certificate
      K0002410M025
      Calibration Certificate supplied as standard
      Kinematic Viscosity at 25°C (77°F)* 710cSt
      Suitable for Dip Cups Zahn 5
      DIN Frikmar
      ASTM/FORD Frikmar
      ISO Frikmar
      Shell
      Suitable for Flow Cups DIN
      ASTM/FORD 4
      ISO
      Part Number Certificate
      K0002410M026
      Calibration Certificate supplied as standard
      Kinematic Viscosity at 25°C (77°F)* 1,200cSt
      Suitable for Dip Cups Zahn 6
      DIN Frikmar
      ASTM/FORD Frikmar
      ISO Frikmar
      Shell
      Suitable for Flow Cups DIN
      ASTM/FORD 4
      ISO
      *Nominal value
      Calibration Certificate supplied as standard.
  • Downloads
    • Downloads
      • Elcometer Viscosity Cup Standard Calibration Oils Datasheet

      • Elcometer 2410 Standard Calibration Oils (Sales Part Number: K0002410M021) Material Safety Data Sheet

      • Elcometer 2410 Standard Calibration Oils (Sales Part Numbers: K0002410M022 & M023) Material Safety Data Sheet

      • Elcometer 2410 Standard Calibration Oils (Sales Part Numbers: K0002410M024, M025 & M026) Material Safety Data Sheet

  • Part Numbers
    • Part Numbers
      Elcometer 2410 Viscosity Cup Standard Calibration Oils
      • Elcometer 2410 Viscosity Cup Standard Calibration Oil

        The Elcometer 2410 Viscosity Cup Standard Calibration Oils are used to check the viscosity cup's calibration and certify it for ISO purposes. This calibration oil has a Kinematic Viscosity of 34cSt.

        • Suitable for Dip Cups: Zahn 1, ISO Frikmar 3, Shell 2
        • Suitable for Flow Cups: ASTM/FORD 2, ISO 3
        • Part Number : K0002410M021
        • Certification : Calibration Certificate
      • Elcometer 2410 Viscosity Cup Standard Calibration Oil

        The Elcometer 2410 Viscosity Cup Standard Calibration Oils are used to check the viscosity cup's calibration and certify it for ISO purposes. This calibration oil has a Kinematic Viscosity of 120cSt.

        • Suitable for Dip Cups: Zahn 2, DIN Frikmar 4, ISO Frikmar 4, Shell 4
        • Suitable for Flow Cups: DIN 4, ASTM/FORD 3, ISO 4
        • Part Number : K0002410M022
        • Certification : Calibration Certificate
      • Elcometer 2410 Viscosity Cup Standard Calibration Oil

        The Elcometer 2410 Viscosity Cup Standard Calibration Oils are used to check the viscosity cup's calibration and certify it for ISO purposes. This calibration oil has a Kinematic Viscosity of 230cSt.

        • Suitable for Dip Cups: Zahn 3, DIN Frikmar 4, ASTM/FORD Frikmar 4, ISO Frikmar 6, Shell 5
        • Suitable for Flow Cups: DIN 4, ASTM/FORD 4, ISO 6
        • Part Number : K0002410M023
        • Certification : Calibration Certificate
      • Elcometer 2410 Viscosity Cup Standard Calibration Oil

        The Elcometer 2410 Viscosity Cup Standard Calibration Oils are used to check the viscosity cup's calibration and certify it for ISO purposes. This calibration oil has a Kinematic Viscosity of 420cSt.

        • Suitable for Dip Cups: Zahn 4, DIN Frikmar 4, ISO Frikmar 6, Shell 6
        • Suitable for Flow Cups: DIN 4, ISO 6
        • Part Number : K0002410M024
        • Certification : Calibration Certificate
      • Elcometer 2410 Viscosity Cup Standard Calibration Oil

        The Elcometer 2410 Viscosity Cup Standard Calibration Oils are used to check the viscosity cup's calibration and certify it for ISO purposes. This calibration oil has an Kinematic Viscosity of 710cSt.

        • Suitable for Dip Cups: Zahn 5
        • Part Number : K0002410M025
        • Certification : Calibration Certificate
      • Elcometer 2410 Viscosity Cup Standard Calibration Oil

        The Elcometer 2410 Viscosity Cup Standard Calibration Oils are used to check the viscosity cup's calibration and certify it for ISO purposes. This calibration oil has a Kinematic Viscosity of 1,200cSt.

        • Suitable for Dip Cups: Zahn 6
        • Part Number : K0002410M026
        • Certification : Calibration Certificate

Elcometer 2410 Viscosity Cup Standard Calibration Oils

  • Protective Coatings
  • Industrial Finishing
  • Laboratory & Physical Test
Elcometer-Viscosity-Cup-Calibration-Oils_1

The Elcometer 2410 Viscosity Cup Standard Calibration Oils are used to check the viscosity cup's calibration and certify it for ISO purposes.

Summary

Elcometer 2410 Viscosity Cup Standard Calibration Oils

Standard oils have a specific drain time, dependent upon the viscosity cup type (Ford, Shell, Zahn etc.) and the orifice or cup number used.

To check the viscosity cup, use the standard viscosity oils in place of the liquid and measure the drain time.

Specific calibration oils can only be used with specific flow and dip cups. Please use the table below to determine which calibration oil is required with each cup, or contact Elcometer. Viscosity oils are supplied in ½ litre (1 pint) bottles.

Downloads
  • Elcometer Viscosity Cup Standard Calibration Oils Datasheet

  • Elcometer 2410 Standard Calibration Oils (Sales Part Number: K0002410M021) Material Safety Data Sheet

  • Elcometer 2410 Standard Calibration Oils (Sales Part Numbers: K0002410M022 & M023) Material Safety Data Sheet

  • Elcometer 2410 Standard Calibration Oils (Sales Part Numbers: K0002410M024, M025 & M026) Material Safety Data Sheet

Technical Specification
Elcometer 2410 Viscosity Cup Standard Calibration Oils
 
Part Number
Suitable for Dip Cups Suitable for Flow Cups

Zahn

DIN Frikmar

AASTM/FORD Frikmar

ISO Frikmar

Shell

DIN

ASTM/FORD

ISO

 
Kinematic Viscosity at 25°C (77°F)* Certificate
K0002410M021
1 3 2 2 3
34cSt
Calibration Certificate supplied as standard
K0002410M022
2 4 4 4 4 3 4
120cSt
Calibration Certificate supplied as standard
K0002410M023
3 4 4 6 5 4 4 6
230cSt
Calibration Certificate supplied as standard
K0002410M024
4 4 6 6 4 4 6
420cSt
Calibration Certificate supplied as standard
K0002410M025
5 4
710cSt
Calibration Certificate supplied as standard
K0002410M026
6 4
1,200cSt
Calibration Certificate supplied as standard
Part Number Certificate
K0002410M021
Calibration Certificate supplied as standard
Kinematic Viscosity at 25°C (77°F)* 34cSt
Suitable for Dip Cups Zahn 1
DIN Frikmar
ASTM/FORD Frikmar
ISO Frikmar 3
Shell 2
Suitable for Flow Cups DIN
ASTM/FORD 2
ISO 3
Part Number Certificate
K0002410M022
Calibration Certificate supplied as standard
Kinematic Viscosity at 25°C (77°F)* 120cSt
Suitable for Dip Cups Zahn 2
DIN Frikmar 4
ASTM/FORD Frikmar
ISO Frikmar 4
Shell 4
Suitable for Flow Cups DIN 4
ASTM/FORD 3
ISO 4
Part Number Certificate
K0002410M023
Calibration Certificate supplied as standard
Kinematic Viscosity at 25°C (77°F)* 230cSt
Suitable for Dip Cups Zahn 3
DIN Frikmar 4
ASTM/FORD Frikmar 4
ISO Frikmar 6
Shell 5
Suitable for Flow Cups DIN 4
ASTM/FORD 4
ISO 6
Part Number Certificate
K0002410M024
Calibration Certificate supplied as standard
Kinematic Viscosity at 25°C (77°F)* 420cSt
Suitable for Dip Cups Zahn 4
DIN Frikmar 4
ASTM/FORD Frikmar
ISO Frikmar 6
Shell 6
Suitable for Flow Cups DIN 4
ASTM/FORD 4
ISO 6
Part Number Certificate
K0002410M025
Calibration Certificate supplied as standard
Kinematic Viscosity at 25°C (77°F)* 710cSt
Suitable for Dip Cups Zahn 5
DIN Frikmar
ASTM/FORD Frikmar
ISO Frikmar
Shell
Suitable for Flow Cups DIN
ASTM/FORD 4
ISO
Part Number Certificate
K0002410M026
Calibration Certificate supplied as standard
Kinematic Viscosity at 25°C (77°F)* 1,200cSt
Suitable for Dip Cups Zahn 6
DIN Frikmar
ASTM/FORD Frikmar
ISO Frikmar
Shell
Suitable for Flow Cups DIN
ASTM/FORD 4
ISO
*Nominal value
Calibration Certificate supplied as standard.
Part Numbers
Elcometer 2410 Viscosity Cup Standard Calibration Oils
  • Elcometer 2410 Viscosity Cup Standard Calibration Oil

    The Elcometer 2410 Viscosity Cup Standard Calibration Oils are used to check the viscosity cup's calibration and certify it for ISO purposes. This calibration oil has a Kinematic Viscosity of 34cSt.

    • Suitable for Dip Cups: Zahn 1, ISO Frikmar 3, Shell 2
    • Suitable for Flow Cups: ASTM/FORD 2, ISO 3
    • Part Number : K0002410M021
    • Certification : Calibration Certificate
  • Elcometer 2410 Viscosity Cup Standard Calibration Oil

    The Elcometer 2410 Viscosity Cup Standard Calibration Oils are used to check the viscosity cup's calibration and certify it for ISO purposes. This calibration oil has a Kinematic Viscosity of 120cSt.

    • Suitable for Dip Cups: Zahn 2, DIN Frikmar 4, ISO Frikmar 4, Shell 4
    • Suitable for Flow Cups: DIN 4, ASTM/FORD 3, ISO 4
    • Part Number : K0002410M022
    • Certification : Calibration Certificate
  • Elcometer 2410 Viscosity Cup Standard Calibration Oil

    The Elcometer 2410 Viscosity Cup Standard Calibration Oils are used to check the viscosity cup's calibration and certify it for ISO purposes. This calibration oil has a Kinematic Viscosity of 230cSt.

    • Suitable for Dip Cups: Zahn 3, DIN Frikmar 4, ASTM/FORD Frikmar 4, ISO Frikmar 6, Shell 5
    • Suitable for Flow Cups: DIN 4, ASTM/FORD 4, ISO 6
    • Part Number : K0002410M023
    • Certification : Calibration Certificate
  • Elcometer 2410 Viscosity Cup Standard Calibration Oil

    The Elcometer 2410 Viscosity Cup Standard Calibration Oils are used to check the viscosity cup's calibration and certify it for ISO purposes. This calibration oil has a Kinematic Viscosity of 420cSt.

    • Suitable for Dip Cups: Zahn 4, DIN Frikmar 4, ISO Frikmar 6, Shell 6
    • Suitable for Flow Cups: DIN 4, ISO 6
    • Part Number : K0002410M024
    • Certification : Calibration Certificate
  • Elcometer 2410 Viscosity Cup Standard Calibration Oil

    The Elcometer 2410 Viscosity Cup Standard Calibration Oils are used to check the viscosity cup's calibration and certify it for ISO purposes. This calibration oil has an Kinematic Viscosity of 710cSt.

    • Suitable for Dip Cups: Zahn 5
    • Part Number : K0002410M025
    • Certification : Calibration Certificate
  • Elcometer 2410 Viscosity Cup Standard Calibration Oil

    The Elcometer 2410 Viscosity Cup Standard Calibration Oils are used to check the viscosity cup's calibration and certify it for ISO purposes. This calibration oil has a Kinematic Viscosity of 1,200cSt.

    • Suitable for Dip Cups: Zahn 6
    • Part Number : K0002410M026
    • Certification : Calibration Certificate