Elcometer 122 Testex® Replica Tape

  • Protective Coatings
122-intro-image

The Elcometer 122 Testex® Replica Tape is designed to provide a permanent mould of the surface profile, which can then be measured using a thickness gauge.

  • Summary
    • Summary

    • Elcometer 122 Testex® Tape consists of foam with a non-compressible backing. The foam side is rubbed into the surface providing a permanent mould of the peak-to-valley profile. The profile of the surface can then be measured using the Elcometer 124 Thickness Gauge.

      Elcometer 122 Testex® Replica Tape is available in four profile ranges. It is important that the tape grade chosen is reflective of the profile being measured.

      • For profiles between 12 & 25µm (0.5 & 1.0mils): Coarse Minus Tape
        For profiles between 20 & 64µm (0.8 & 2.5mils): Coarse Tape
        For profiles between 38 & 115µm (1.5 & 4.5mils): X-Coarse Tape
        For profiles between 116 & 127µm (4.6 & 5.0mils): X-Coarse Plus Tape

      There are 50 tests in each Replica Tape roll.

  • Key Features
    • Key Features

      Elcometer 122 Testex® Replica Tape

      How to take a reading using the Testex® Replica Tape

      1.Tear off one section of the tape from the roll, peel off the backing tape and retain the back if required for future use.

      2. Stick the tape on to the test surface, and rub the central portion using the swizzle stick provided, or the end of a pen, pencil or similar rounded object until dark spots appear. This gives a surface replica.

      3. Using a micrometer such as the Elcometer 124 Thickness Gauge, measure the thickness of the central portion of the tape replica and subtract 50µm (2mils) from the reading. This result is the peak-to-valley profile height. Write the value on the tape.

      4. If the value falls within the purple band on the coarse tape (38-64µm) then repeat the test as shown in step 2 using the extra coarse tape and then average the two values.

      5. If the tape is required for future reference, replace the backing tape to preserve the imprinted profile.

  • Technical Information
    • Technical Specification
      Elcometer 122 Testex® Replica Tape
      Description Profile Range Part Number
        Metric Imperial 1 Roll Pack of 10 Pack of 50 Pack of 100
      Elcometer 122 Testex® Replica Tape Coarse Minus 12 - 25µm 0.5 - 1.0mils E122----A1 E122----A10 E122----A50 E122----A100
      Elcometer 122 Testex® Replica Tape Coarse 20 - 64μm 0.8 - 2.5mils E122----B1 E122----B10 E122----B50 E122----B100
      Elcometer 122 Testex® Replica Tape X-Coarse 38 - 115μm 1.5 - 4.5mils E122----C1 E122----C10 E122----C50 E122----C100
      Elcometer 122 Testex® Replica Tape X-Coarse Plus 116 - 127μm 4.6 - 5.0mils E122----F1 E122----F10 E122----F50 E122----F100
      Part Number Metric Imperial
      E122----A1 12 - 25µm 0.5 - 1.0mils
      Description Elcometer 122 Testex® Replica Tape Coarse Minus
      E122----B1 20 - 64μm 0.8 - 2.5mils
      Description Elcometer 122 Testex® Replica Tape Coarse
      E122----C1 38 - 115μm 1.5 - 4.5mils
      Description Elcometer 122 Testex® Replica Tape X-Coarse
      E122----F1 116 - 127μm 4.6 - 5.0mils
      Description Elcometer 122 Testex® Replica Tape X-Coarse Plus
      E122----A10 12 - 25µm 0.5 - 1.0mils
      Description Elcometer 122 Testex® Replica Tape Coarse Minus - Pack of 10
      E122----B10 20 - 64μm 0.8 - 2.5mils
      Description Elcometer 122 Testex® Replica Tape Coarse - Pack of 10
      E122----C10 38 - 115μm 1.5 - 4.5mils
      Description Elcometer 122 Testex® Replica Tape X-Coarse - Pack of 10
      E122----F10 116 - 127μm 4.6 - 5.0mils
      Description Elcometer 122 Testex® Replica Tape X-Coarse Plus - Pack of 10
      E122----A50 12 - 25µm 0.5 - 1.0mils
      Description Elcometer 122 Testex® Replica Tape Coarse Minus - Pack of 50
      E122----B50 20 - 64μm 0.8 - 2.5mils
      Description Elcometer 122 Testex® Replica Tape Coarse - Pack of 50
      E122----C50 38 - 115μm 1.5 - 4.5mils
      Description Elcometer 122 Testex® Replica Tape X-Coarse - Pack of 50
      E122----F50 116 - 127μm 4.6 - 5.0mils
      Description Elcometer 122 Testex® Replica Tape X-Coarse Plus - Pack of 50
      E122----A100 12 - 25µm 0.5 - 1.0mils
      Description Elcometer 122 Testex® Replica Tape Coarse Minus - Pack of 100
      E122----B100 20 - 64μm 0.8 - 2.5mils
      Description Elcometer 122 Testex® Replica Tape Coarse - Pack of 100
      E122----C100 38 - 115μm 1.5 - 4.5mils
      Description Elcometer 122 Testex® Replica Tape X-Coarse - Pack of 100
      E122----F100 116 - 127μm 4.6 - 5.0mils
      Description Elcometer 122 Testex® Replica Tape X-Coarse Plus - Pack of 100
  • Standards
    • Standards
      Elcometer 122 Testex® Replica Tape

      ASTM D 4417-C, BS 7079-C5, ISO 8503-5, NACE RP0287, SSPC PA 17, US Navy NSI 009-32, US Navy PPI 63101-000

      Standards in grey have been superseded but are still recognised in some industries.

  • Downloads
    • Downloads
      • Elcometer 122 Testex® Replica Tape Multi-Lingual Instruction Manual

      • Elcometer 122 Testex® Replica Tape Datasheet

  • Part Numbers
    • Part Numbers
      Elcometer 122 Testex® Replica Tape
      • Elcometer 122 Testex® Replica Tape Coarse Minus - 1 Roll

        For surface profiles between 12 & 25µm (0.5 & 1.0mils). There are 50 tests in each Replica Tape roll.



        • Part Number : E122----A1
        • Certification : No Certificate
      • Elcometer 122 Testex® Replica Tape Coarse Minus - Pack of 10

        For surface profiles between 12 & 25µm (0.5 & 1.0mils). This pack of 10 replica tape includes 500 tests.





        • Part Number : E122----A10
        • Certification : No Certificate
      • Elcometer 122 Testex® Replica Tape Coarse Minus - Pack of 50

        For surface profiles between 12 & 25µm (0.5 & 1.0mils). This pack of 50 replica tape includes 2,500 tests.





        • Part Number : E122----A50
        • Certification : No Certificate
      • Elcometer 122 Testex® Replica Tape Coarse Minus - Pack of 100

        For surface profiles between 12 & 25µm (0.5 & 1.0mils). This pack of 50 replica tape includes 5,000 tests.





        • Part Number : E122----A100
        • Certification : No Certificate
      • Elcometer 122 Testex® Replica Tape Coarse - 1 Roll

        For profiles between 20 & 64µm (0.8 & 2.5mils). There are 50 tests in each Replica Tape roll.

        • Part Number : E122----B1
        • Certification : No Certificate
      • Elcometer 122 Testex® Replica Tape Coarse - Pack of 10

        For profiles between 20 & 64µm (0.8 & 2.5mils). This pack of 10 replica tape includes 500 tests.

        • Part Number : E122----B10
        • Certification : No Certificate
      • Elcometer 122 Testex® Replica Tape Coarse - Pack of 50

        For profiles between 20 & 64µm (0.8 & 2.5mils). This pack of 50 replica tape includes 2,500 tests.

        • Part Number : E122----B50
        • Certification : No Certificate
      • Elcometer 122 Testex® Replica Tape Coarse - Pack of 100

        For profiles between 20 & 64µm (0.8 & 2.5mils). This pack of 50 replica tape includes 5,000 tests.

        • Part Number : E122----B100
        • Certification : No Certificate
      • Elcometer 122 Testex® Replica Tape X-Coarse - 1 Roll

        For profiles between 38 & 115µm (1.5 & 4.5mils). There are 50 tests in each Replica Tape roll.

        • Part Number : E122----C1
        • Certification : No Certificate
      • Elcometer 122 Testex® Replica Tape X-Coarse - Pack of 10

        For profiles between 38 & 115µm (1.5 & 4.5mils). This pack of 10 replica tape includes 500 tests.

        • Part Number : E122----C10
        • Certification : No Certificate
      • Elcometer 122 Testex® Replica Tape X-Coarse - Pack of 50

        For profiles between 38 & 115µm (1.5 & 4.5mils). This pack of 50 replica tape includes 2,500 tests.

        • Part Number : E122----C50
        • Certification : No Certificate
      • Elcometer 122 Testex® Replica Tape X-Coarse - Pack of 100

        For profiles between 38 & 115µm (1.5 & 4.5mils). This pack of 100 replica tape includes 5,000 tests.

        • Part Number : E122----C100
        • Certification : No Certificate
      • Elcometer 122 Testex® Replica Tape X-Coarse Plus - 1 Roll

        For profiles between 116 & 127µm (4.6 & 5.0mils). There are 50 tests in each Replica Tape roll.

        • Part Number : E122----F1
        • Certification : No Certificate
      • Elcometer 122 Testex® Replica Tape X-Coarse Plus - Pack of 10

        For profiles between 116 & 127µm (4.6 & 5.0mils). This pack of 10 replica tape includes 500 tests.





        • Part Number : E122----F10
        • Certification : No Certificate
      • Elcometer 122 Testex® Replica Tape X-Coarse Plus - Pack of 50

        For profiles between 116 & 127µm (4.6 & 5.0mils). This pack of 50 replica tape includes 2,500 tests.





        • Part Number : E122----F50
        • Certification : No Certificate
      • Elcometer 122 Testex® Replica Tape X-Coarse Plus - Pack of 100

        For profiles between 116 & 127µm (4.6 & 5.0mils). This pack of 100 replica tape includes 5,000 tests.





        • Part Number : E122----F100
        • Certification : No Certificate
  • Accessories
    • Accessories
      Elcometer 122 Testex® Replica Tape
      • Part NumberT12222498

Elcometer 122 Testex® Replica Tape

  • Protective Coatings
122-intro-image

The Elcometer 122 Testex® Replica Tape is designed to provide a permanent mould of the surface profile, which can then be measured using a thickness gauge.

Summary

Elcometer 122 Testex® Replica Tape

Elcometer 122 Testex® Tape consists of foam with a non-compressible backing. The foam side is rubbed into the surface providing a permanent mould of the peak-to-valley profile. The profile of the surface can then be measured using the Elcometer 124 Thickness Gauge.

Elcometer 122 Testex® Replica Tape is available in four profile ranges. It is important that the tape grade chosen is reflective of the profile being measured.

  • For profiles between 12 & 25µm (0.5 & 1.0mils): Coarse Minus Tape
    For profiles between 20 & 64µm (0.8 & 2.5mils): Coarse Tape
    For profiles between 38 & 115µm (1.5 & 4.5mils): X-Coarse Tape
    For profiles between 116 & 127µm (4.6 & 5.0mils): X-Coarse Plus Tape

There are 50 tests in each Replica Tape roll.

Downloads
  • Elcometer 122 Testex® Replica Tape Multi-Lingual Instruction Manual

  • Elcometer 122 Testex® Replica Tape Datasheet

Key Features

Elcometer 122 Testex® Replica Tape

How to take a reading using the Testex® Replica Tape

1.Tear off one section of the tape from the roll, peel off the backing tape and retain the back if required for future use.

2. Stick the tape on to the test surface, and rub the central portion using the swizzle stick provided, or the end of a pen, pencil or similar rounded object until dark spots appear. This gives a surface replica.

3. Using a micrometer such as the Elcometer 124 Thickness Gauge, measure the thickness of the central portion of the tape replica and subtract 50µm (2mils) from the reading. This result is the peak-to-valley profile height. Write the value on the tape.

4. If the value falls within the purple band on the coarse tape (38-64µm) then repeat the test as shown in step 2 using the extra coarse tape and then average the two values.

5. If the tape is required for future reference, replace the backing tape to preserve the imprinted profile.

Technical Specification
Elcometer 122 Testex® Replica Tape
Description Profile Range Part Number
  Metric Imperial 1 Roll Pack of 10 Pack of 50 Pack of 100
Elcometer 122 Testex® Replica Tape Coarse Minus 12 - 25µm 0.5 - 1.0mils E122----A1 E122----A10 E122----A50 E122----A100
Elcometer 122 Testex® Replica Tape Coarse 20 - 64μm 0.8 - 2.5mils E122----B1 E122----B10 E122----B50 E122----B100
Elcometer 122 Testex® Replica Tape X-Coarse 38 - 115μm 1.5 - 4.5mils E122----C1 E122----C10 E122----C50 E122----C100
Elcometer 122 Testex® Replica Tape X-Coarse Plus 116 - 127μm 4.6 - 5.0mils E122----F1 E122----F10 E122----F50 E122----F100
Part Number Metric Imperial
E122----A1 12 - 25µm 0.5 - 1.0mils
Description Elcometer 122 Testex® Replica Tape Coarse Minus
E122----B1 20 - 64μm 0.8 - 2.5mils
Description Elcometer 122 Testex® Replica Tape Coarse
E122----C1 38 - 115μm 1.5 - 4.5mils
Description Elcometer 122 Testex® Replica Tape X-Coarse
E122----F1 116 - 127μm 4.6 - 5.0mils
Description Elcometer 122 Testex® Replica Tape X-Coarse Plus
E122----A10 12 - 25µm 0.5 - 1.0mils
Description Elcometer 122 Testex® Replica Tape Coarse Minus - Pack of 10
E122----B10 20 - 64μm 0.8 - 2.5mils
Description Elcometer 122 Testex® Replica Tape Coarse - Pack of 10
E122----C10 38 - 115μm 1.5 - 4.5mils
Description Elcometer 122 Testex® Replica Tape X-Coarse - Pack of 10
E122----F10 116 - 127μm 4.6 - 5.0mils
Description Elcometer 122 Testex® Replica Tape X-Coarse Plus - Pack of 10
E122----A50 12 - 25µm 0.5 - 1.0mils
Description Elcometer 122 Testex® Replica Tape Coarse Minus - Pack of 50
E122----B50 20 - 64μm 0.8 - 2.5mils
Description Elcometer 122 Testex® Replica Tape Coarse - Pack of 50
E122----C50 38 - 115μm 1.5 - 4.5mils
Description Elcometer 122 Testex® Replica Tape X-Coarse - Pack of 50
E122----F50 116 - 127μm 4.6 - 5.0mils
Description Elcometer 122 Testex® Replica Tape X-Coarse Plus - Pack of 50
E122----A100 12 - 25µm 0.5 - 1.0mils
Description Elcometer 122 Testex® Replica Tape Coarse Minus - Pack of 100
E122----B100 20 - 64μm 0.8 - 2.5mils
Description Elcometer 122 Testex® Replica Tape Coarse - Pack of 100
E122----C100 38 - 115μm 1.5 - 4.5mils
Description Elcometer 122 Testex® Replica Tape X-Coarse - Pack of 100
E122----F100 116 - 127μm 4.6 - 5.0mils
Description Elcometer 122 Testex® Replica Tape X-Coarse Plus - Pack of 100
Standards
Elcometer 122 Testex® Replica Tape

ASTM D 4417-C, BS 7079-C5, ISO 8503-5, NACE RP0287, SSPC PA 17, US Navy NSI 009-32, US Navy PPI 63101-000

Standards in grey have been superseded but are still recognised in some industries.

Part Numbers
Elcometer 122 Testex® Replica Tape
  • Elcometer 122 Testex® Replica Tape Coarse Minus - 1 Roll

    For surface profiles between 12 & 25µm (0.5 & 1.0mils). There are 50 tests in each Replica Tape roll.



    • Part Number : E122----A1
    • Certification : No Certificate
  • Elcometer 122 Testex® Replica Tape Coarse Minus - Pack of 10

    For surface profiles between 12 & 25µm (0.5 & 1.0mils). This pack of 10 replica tape includes 500 tests.





    • Part Number : E122----A10
    • Certification : No Certificate
  • Elcometer 122 Testex® Replica Tape Coarse Minus - Pack of 50

    For surface profiles between 12 & 25µm (0.5 & 1.0mils). This pack of 50 replica tape includes 2,500 tests.





    • Part Number : E122----A50
    • Certification : No Certificate
  • Elcometer 122 Testex® Replica Tape Coarse Minus - Pack of 100

    For surface profiles between 12 & 25µm (0.5 & 1.0mils). This pack of 50 replica tape includes 5,000 tests.





    • Part Number : E122----A100
    • Certification : No Certificate
  • Elcometer 122 Testex® Replica Tape Coarse - 1 Roll

    For profiles between 20 & 64µm (0.8 & 2.5mils). There are 50 tests in each Replica Tape roll.

    • Part Number : E122----B1
    • Certification : No Certificate
  • Elcometer 122 Testex® Replica Tape Coarse - Pack of 10

    For profiles between 20 & 64µm (0.8 & 2.5mils). This pack of 10 replica tape includes 500 tests.

    • Part Number : E122----B10
    • Certification : No Certificate
  • Elcometer 122 Testex® Replica Tape Coarse - Pack of 50

    For profiles between 20 & 64µm (0.8 & 2.5mils). This pack of 50 replica tape includes 2,500 tests.

    • Part Number : E122----B50
    • Certification : No Certificate
  • Elcometer 122 Testex® Replica Tape Coarse - Pack of 100

    For profiles between 20 & 64µm (0.8 & 2.5mils). This pack of 50 replica tape includes 5,000 tests.

    • Part Number : E122----B100
    • Certification : No Certificate
  • Elcometer 122 Testex® Replica Tape X-Coarse - 1 Roll

    For profiles between 38 & 115µm (1.5 & 4.5mils). There are 50 tests in each Replica Tape roll.

    • Part Number : E122----C1
    • Certification : No Certificate
  • Elcometer 122 Testex® Replica Tape X-Coarse - Pack of 10

    For profiles between 38 & 115µm (1.5 & 4.5mils). This pack of 10 replica tape includes 500 tests.

    • Part Number : E122----C10
    • Certification : No Certificate
  • Elcometer 122 Testex® Replica Tape X-Coarse - Pack of 50

    For profiles between 38 & 115µm (1.5 & 4.5mils). This pack of 50 replica tape includes 2,500 tests.

    • Part Number : E122----C50
    • Certification : No Certificate
  • Elcometer 122 Testex® Replica Tape X-Coarse - Pack of 100

    For profiles between 38 & 115µm (1.5 & 4.5mils). This pack of 100 replica tape includes 5,000 tests.

    • Part Number : E122----C100
    • Certification : No Certificate
  • Elcometer 122 Testex® Replica Tape X-Coarse Plus - 1 Roll

    For profiles between 116 & 127µm (4.6 & 5.0mils). There are 50 tests in each Replica Tape roll.

    • Part Number : E122----F1
    • Certification : No Certificate
  • Elcometer 122 Testex® Replica Tape X-Coarse Plus - Pack of 10

    For profiles between 116 & 127µm (4.6 & 5.0mils). This pack of 10 replica tape includes 500 tests.





    • Part Number : E122----F10
    • Certification : No Certificate
  • Elcometer 122 Testex® Replica Tape X-Coarse Plus - Pack of 50

    For profiles between 116 & 127µm (4.6 & 5.0mils). This pack of 50 replica tape includes 2,500 tests.





    • Part Number : E122----F50
    • Certification : No Certificate
  • Elcometer 122 Testex® Replica Tape X-Coarse Plus - Pack of 100

    For profiles between 116 & 127µm (4.6 & 5.0mils). This pack of 100 replica tape includes 5,000 tests.





    • Part Number : E122----F100
    • Certification : No Certificate
   
Accessories
Elcometer 122 Testex® Replica Tape
  • Part Number: T12222498