Elcometer 142 ISO 8502-3 Dust Tape Test Kit
- Protective Coatings
- Industrial Finishing
The Elcometer 142 Dust Tape Test Kit allows assessment of the quantity and size of dust particles on surfaces prepared for painting.
- Summary
-
Summary
-
Dust on blast cleaned surfaces can reduce coating adhesion, leading to premature coating failure and sub-standard coating finish.
Used in conjunction with the Elcometer 145 Dust Tape Roller the kit can be used in accordance with the recommendations of BS EN ISO 8502-3 either as a pass/fail test or as a permanent record of the presence of dust.
-
- Technical Information
-
Technical SpecificationElcometer 142 ISO 8502-3 Dust Tape Test Kit
Part Number Description E142----1 Elcometer 142 ISO 8502-3 Dust Tape Test Kit Measuring Range Chart with dust classes ranging from 0 - 5 with descriptions for accurate class placement Dimensions 210 x 297mm (8.27 x 11.69”) Weight 250g (9oz) Packing List Microscope with 10 x magnifier, 2 batteries (LR14), graticule, adhesive tape to specification ISO 8502-3, comparator display board, dust assessment plate, test record sheets (pack of 25) and operating instructions
-
- Standards
-
StandardsElcometer 142 ISO 8502-3 Dust Tape Test Kit
AS3894.6-C, IMO MSC.215 (82), IMO MSC.244 (83), ISO 8502-3, US Navy PPI 63101-000
-
- Downloads
-
Downloads
-
Elcometer 142 ISO 8502-3 Dust Tape Test Kit Instruction Manual
-
Elcometer 142 ISO 8502-3 Dust Tape Test Kit Datasheet
-
Elcometer ISO Tape Material Safety Data Sheet
- Part Numbers
-
Part NumbersElcometer 142 ISO 8502-3 Dust Tape Test Kit
-
Elcometer 142 ISO 8502-3 Dust Tape Test Kit- Part Number : E142----1
- Accessories
-
AccessoriesElcometer 142 ISO 8502-3 Dust Tape Test Kit
Part Number: T14219451
Part Number: T14219454
Part Number: T14219525
Part Number: T9999358-1
Part Number: T9999358-2
-
Elcometer 142 ISO 8502-3 Dust Tape Test Kit
- Protective Coatings
- Industrial Finishing
The Elcometer 142 Dust Tape Test Kit allows assessment of the quantity and size of dust particles on surfaces prepared for painting.
Summary
Elcometer 142 ISO 8502-3 Dust Tape Test Kit
Dust on blast cleaned surfaces can reduce coating adhesion, leading to premature coating failure and sub-standard coating finish.
Used in conjunction with the Elcometer 145 Dust Tape Roller the kit can be used in accordance with the recommendations of BS EN ISO 8502-3 either as a pass/fail test or as a permanent record of the presence of dust.
Downloads-
Elcometer 142 ISO 8502-3 Dust Tape Test Kit Instruction Manual
-
Elcometer 142 ISO 8502-3 Dust Tape Test Kit Datasheet
-
Elcometer ISO Tape Material Safety Data Sheet
Technical SpecificationElcometer 142 ISO 8502-3 Dust Tape Test KitPart Number Description E142----1 Elcometer 142 ISO 8502-3 Dust Tape Test Kit Measuring Range Chart with dust classes ranging from 0 - 5 with descriptions for accurate class placement Dimensions 210 x 297mm (8.27 x 11.69”) Weight 250g (9oz) Packing List Microscope with 10 x magnifier, 2 batteries (LR14), graticule, adhesive tape to specification ISO 8502-3, comparator display board, dust assessment plate, test record sheets (pack of 25) and operating instructions StandardsElcometer 142 ISO 8502-3 Dust Tape Test KitAS3894.6-C, IMO MSC.215 (82), IMO MSC.244 (83), ISO 8502-3, US Navy PPI 63101-000
Part NumbersElcometer 142 ISO 8502-3 Dust Tape Test Kit-
Elcometer 142 ISO 8502-3 Dust Tape Test Kit
- Part Number : E142----1
AccessoriesElcometer 142 ISO 8502-3 Dust Tape Test Kit-
Part Number: T14219451
-
Part Number: T14219454
-
Part Number: T14219525
-
Part Number: T9999358-1
-
Part Number: T9999358-2
-
-