Elcometer 138 Conductivity Meter

  • Protective Coatings
  • Industrial Finishing
Elcometer-138-conductivity-meter-new-intro
Elcometer-138-Bresle-Salt-Meter-Sensor-intro

Incorporating a flat sensor, the Elcometer 138 Conductivity Meter can measure the conductivity of a solution from a single drop of a sample.

  • Summary
    • Summary

    • Users can either place a sample on the meter’s flat sensor or immerse the meter’s sensor directly into the solution under test. The Elcometer 138 can be used for a broad range of applications, including: soluble salt concentrations, the electric conductivity (EC) of solutions used in agricultural operations and measuring rainwater pollution levels.

      The Elcometer 138 Conductivity Meter includes a convenient salinity conversion indicator.

      Features:

      • Highly precise measurements can be obtained from a single drop
      • Automatic range switching gives a wide measurement range of 1μs/cm to 19.99mS/cm
      • Out of range and low battery alarms
      • Visual indication when ambient temperature is outside the operating range
  • Technical Information
    • Technical Specification
      Elcometer 138 Conductivity Meter
      Part Number Description
      E138-CM Elcometer 138 Conductivity Meter
      Measurement Principle Measurement Principle
      Measurement Mode Conductivity, Temperature
      Minimum Sample Volume 0.12ml
      Measuring Range 0 - 19.99mS/cm
      Resolution 0 - 1999μS/cm: 1μS/cm
      2.00 - 19.99mS/cm: 0.01mS/cm
      Accuracy ±2% full scale (for each range)
      Operating Temperature 5°C to 40°C (41°F to 104°F)
      Operating Humidity 85% or less relative humidity (no condensation)
      Battery Type 2 x CR2032 lithium batteries
      Battery Life approx. 200 hours of continuous use without backlight
      Weight 50g (1.76oz) - including sensor and batteries
      Dimensions 164 x 29 x 20mm (6.5 x 1.1 x 0.79”)
      Packing List Elcometer 138 Conductivity Meter, 14ml (0.5fl oz) bottle of conditioning solution, 14ml (0.5fl oz) bottle of standard 1413μS/cm calibration solution, 2 x CR2032 lithium batteries and operating instructions
  • Downloads
    • Downloads
        • Elcometer 138 Conductivity Meter Instruction Manual

        • Elcometer 138 Conductivity Meter Datasheet

        • Elcometer 138 Conductivity Meter Declaration of Conformity

        • Elcometer 138 Standard 1413μS/cm Calibration Solution Material Safety Data Sheet

  • Part Numbers
    • Part Numbers
      Elcometer 138 Conductivity Meter
      • Elcometer 138 Conductivity Meter

        Elcometer 138 Conductivity Meter can measure the conductivity of a solution from a single drop of a sample.

        • Part Number : E138-CM
        • Certification : No Certificate
  • Accessories
    • Accessories
      Elcometer 138 Conductivity Meter
      • Part NumberT13830628
      • Part NumberT13830629-2

Elcometer 138 Conductivity Meter

  • Protective Coatings
  • Industrial Finishing
Elcometer-138-conductivity-meter-new-intro
Elcometer-138-Bresle-Salt-Meter-Sensor-intro

Incorporating a flat sensor, the Elcometer 138 Conductivity Meter can measure the conductivity of a solution from a single drop of a sample.

Summary

Elcometer 138 Conductivity Meter

Users can either place a sample on the meter’s flat sensor or immerse the meter’s sensor directly into the solution under test. The Elcometer 138 can be used for a broad range of applications, including: soluble salt concentrations, the electric conductivity (EC) of solutions used in agricultural operations and measuring rainwater pollution levels.

The Elcometer 138 Conductivity Meter includes a convenient salinity conversion indicator.

Features:

  • Highly precise measurements can be obtained from a single drop
  • Automatic range switching gives a wide measurement range of 1μs/cm to 19.99mS/cm
  • Out of range and low battery alarms
  • Visual indication when ambient temperature is outside the operating range
Downloads
    • Elcometer 138 Conductivity Meter Instruction Manual

    • Elcometer 138 Conductivity Meter Datasheet

    • Elcometer 138 Conductivity Meter Declaration of Conformity

    • Elcometer 138 Standard 1413μS/cm Calibration Solution Material Safety Data Sheet

Technical Specification
Elcometer 138 Conductivity Meter
Part Number Description
E138-CM Elcometer 138 Conductivity Meter
Measurement Principle Measurement Principle
Measurement Mode Conductivity, Temperature
Minimum Sample Volume 0.12ml
Measuring Range 0 - 19.99mS/cm
Resolution 0 - 1999μS/cm: 1μS/cm
2.00 - 19.99mS/cm: 0.01mS/cm
Accuracy ±2% full scale (for each range)
Operating Temperature 5°C to 40°C (41°F to 104°F)
Operating Humidity 85% or less relative humidity (no condensation)
Battery Type 2 x CR2032 lithium batteries
Battery Life approx. 200 hours of continuous use without backlight
Weight 50g (1.76oz) - including sensor and batteries
Dimensions 164 x 29 x 20mm (6.5 x 1.1 x 0.79”)
Packing List Elcometer 138 Conductivity Meter, 14ml (0.5fl oz) bottle of conditioning solution, 14ml (0.5fl oz) bottle of standard 1413μS/cm calibration solution, 2 x CR2032 lithium batteries and operating instructions
Part Numbers
Elcometer 138 Conductivity Meter
  • Elcometer 138 Conductivity Meter

    Elcometer 138 Conductivity Meter can measure the conductivity of a solution from a single drop of a sample.

    • Part Number : E138-CM
    • Certification : No Certificate
   
Accessories
Elcometer 138 Conductivity Meter
  • Part Number: T13830628
  • Part Number: T13830629-2