Elcometer 270 Pinhole Detector

  • Protective Coatings
  • Industrial Finishing
270-pin-hole-detector-intro-1
270-pin-hole-intro-2

The Elcometer 270 Pinhole Detector range utilises the wet sponge technique and has been designed to set a new standard for wet sponge pinhole detectors.

  • Summary
    • Summary

    • The Elcometer 270 Pinhole Detector is a high quality, low voltage detector and is supplied with similar accessories to a high voltage spark tester.

      • Supplied ready to use
      • Automatic sensitivity calibration and voltage checks
      • Low battery indicator
      • Visual and audible alarms
      • Integral and separate wand functionality
      • A wide range of fully interchangeable wand accessories
      • Easy release snag proof cables
      • Large standard sponge
      • An inspection kit for all your requirements is available.
  • Technical Information
    • Technical Specification
      Elcometer 270 Pinhole Detector
        Elcometer 270/3 Pinhole Detector Elcometer 270/4 Pinhole Detector Certificate
      Part Number D270----3 D270----4
      Part Number with Certificate D270----3C D270----4C
      Calibration Certificate supplied as standard
      Voltage 9V and 90V 9V, 67.5V and 90V  
      Coating Range (Max) 500µm (20mils) 500µm (20mils)  
      Sensitivity 9V: 90kΩ ±5%
      90V: 400kΩ ±5%
      9V: 90kΩ ±5%
      67.5V: 125kΩ ±5%
      90V: 400kΩ ±5%
       
      Battery Life
      (continuous use)
      9V: up to 200 hours
      90V: up to 80 hours
      9V: up to 200 hours
      67.5V: up to 100 hours
      90V: up to 80 hours
       
      Battery Type 3 x AA batteries (rechargeable batteries can also be used, but battery life will be reduced by up to 75%)
      Accuracy of Setting ±5%
      Dimensions Without wand 210 x 42 x 37mm (8.3 x 1.7 x 1.5”)
      Standard wand 175mm (6.9”) long (including sponge)
      Weight 610g (21oz) including wand, cable and batteries
      Packing List Pinhole Detector, standard wand and flat sponge, 4m (13’ 2”) return lead with crocodile clip, 3 x AA (LR1600) batteries and operating instructions
        Elcometer 270/3 Pinhole Detector Elcometer 270/4 Pinhole Detector
      Part Number D270----3 D270----4
      Certificate
       
      Part Number with Certificate D270----3C D270----4C
      Certificate
      Calibration Certificate supplied as standard
       
      Voltage 9V and 90V 9V, 67.5V and 90V
      Coating Range (Max) 500µm (20mils) 500µm (20mils)
      Sensitivity 9V: 90kΩ ±5%
      90V: 400kΩ ±5%
      9V: 90kΩ ±5%
      67.5V: 125kΩ ±5%
      90V: 400kΩ ±5%
      Battery Life
      (continuous use)
      9V: up to 200 hours
      90V: up to 80 hours
      9V: up to 200 hours
      67.5V: up to 100 hours
      90V: up to 80 hours
      Battery Type 3 x AA batteries (rechargeable batteries can also be used, but battery life will be reduced by up to 75%)
      Accuracy of Setting ±5%
      Dimensions Without wand 210 x 42 x 37mm (8.3 x 1.7 x 1.5”)
      Standard wand 175mm (6.9”) long (including sponge)
      Weight 610g (21oz) including wand, cable and batteries
      Packing List Pinhole Detector, standard wand and flat sponge, 4m (13’ 2”) return lead with crocodile clip, 3 x AA (LR1600) batteries and operating instructions
      Calibration Certificate supplied as standard.
  • Standards
    • Standards
      Elcometer 270 Pinhole Detector

      AS 3894.2, ASTM D 5162-A, ASTM G6, ASTM G62-A, BS 7793-2, ISO 29601:2011, ISO 8289-A, ISO 14654, JIS K 6766, NACE RP 0188, NACE SP 0188, NACE TM0384

      Standards in grey have been superseded but are still recognised in some industries.

  • Downloads
    • Downloads
      • Elcometer 270 Pinhole Detector Multi-Lingual Instruction Manual

      • Elcometer 270 Pinhole Detector Data Sheet

      • Elcometer 270 Pinhole Detection Inspection Kit Data Sheet

      • Elcometer 270 Wetting Agent Material Safety Data Sheet

      • Elcometer 270 Pinhole Detector Declaration of Conformity

  • Part Numbers
    • Part Numbers
      Elcometer 270 Pinhole Detector
      • Elcometer 270/3 Pinhole Detector

        The Elcometer 270 Pinhole Detector is a high quality, low voltage detector and is supplied with similar accessories to a high voltage spark tester.

        • Voltage: 9V and 90V
        • Part Number : D270----3
        • Certification : No Certificate
        • Part Number : D270----3C
        • Certification : Calibration Certificate
      • Elcometer 270/4 Pinhole Detector

        The Elcometer 270 Pinhole Detector is a high quality, low voltage detector and is supplied with similar accessories to a high voltage spark tester.

        • Voltage: 9V, 67.5V and 90V
        • Part Number : D270----4
        • Certification : No Certificate
        • Part Number : D270----4C
        • Certification : Calibration Certificate
  • Accessories
    • Accessories
      Elcometer 270 Pinhole Detector
      • Part NumberT27018191
      • Part NumberT27016867
      • Part NumberT27018050
      • Part NumberT27016960
      • Part NumberT27018051
      • Part NumberT27016998
      • Part NumberT27016999
      • Part NumberT27016965
      • Part NumberT99916954
      • Part NumberT99916996
      • Part NumberT27018024

Elcometer 270 Pinhole Detector

  • Protective Coatings
  • Industrial Finishing
270-pin-hole-detector-intro-1
270-pin-hole-intro-2

The Elcometer 270 Pinhole Detector range utilises the wet sponge technique and has been designed to set a new standard for wet sponge pinhole detectors.

Summary

Elcometer 270 Pinhole Detector

The Elcometer 270 Pinhole Detector is a high quality, low voltage detector and is supplied with similar accessories to a high voltage spark tester.

  • Supplied ready to use
  • Automatic sensitivity calibration and voltage checks
  • Low battery indicator
  • Visual and audible alarms
  • Integral and separate wand functionality
  • A wide range of fully interchangeable wand accessories
  • Easy release snag proof cables
  • Large standard sponge
  • An inspection kit for all your requirements is available.
Downloads
  • Elcometer 270 Pinhole Detector Multi-Lingual Instruction Manual

  • Elcometer 270 Pinhole Detector Data Sheet

  • Elcometer 270 Pinhole Detection Inspection Kit Data Sheet

  • Elcometer 270 Wetting Agent Material Safety Data Sheet

  • Elcometer 270 Pinhole Detector Declaration of Conformity

Technical Specification
Elcometer 270 Pinhole Detector
  Elcometer 270/3 Pinhole Detector Elcometer 270/4 Pinhole Detector Certificate
Part Number D270----3 D270----4
Part Number with Certificate D270----3C D270----4C
Calibration Certificate supplied as standard
Voltage 9V and 90V 9V, 67.5V and 90V  
Coating Range (Max) 500µm (20mils) 500µm (20mils)  
Sensitivity 9V: 90kΩ ±5%
90V: 400kΩ ±5%
9V: 90kΩ ±5%
67.5V: 125kΩ ±5%
90V: 400kΩ ±5%
 
Battery Life
(continuous use)
9V: up to 200 hours
90V: up to 80 hours
9V: up to 200 hours
67.5V: up to 100 hours
90V: up to 80 hours
 
Battery Type 3 x AA batteries (rechargeable batteries can also be used, but battery life will be reduced by up to 75%)
Accuracy of Setting ±5%
Dimensions Without wand 210 x 42 x 37mm (8.3 x 1.7 x 1.5”)
Standard wand 175mm (6.9”) long (including sponge)
Weight 610g (21oz) including wand, cable and batteries
Packing List Pinhole Detector, standard wand and flat sponge, 4m (13’ 2”) return lead with crocodile clip, 3 x AA (LR1600) batteries and operating instructions
  Elcometer 270/3 Pinhole Detector Elcometer 270/4 Pinhole Detector
Part Number D270----3 D270----4
Certificate
 
Part Number with Certificate D270----3C D270----4C
Certificate
Calibration Certificate supplied as standard
 
Voltage 9V and 90V 9V, 67.5V and 90V
Coating Range (Max) 500µm (20mils) 500µm (20mils)
Sensitivity 9V: 90kΩ ±5%
90V: 400kΩ ±5%
9V: 90kΩ ±5%
67.5V: 125kΩ ±5%
90V: 400kΩ ±5%
Battery Life
(continuous use)
9V: up to 200 hours
90V: up to 80 hours
9V: up to 200 hours
67.5V: up to 100 hours
90V: up to 80 hours
Battery Type 3 x AA batteries (rechargeable batteries can also be used, but battery life will be reduced by up to 75%)
Accuracy of Setting ±5%
Dimensions Without wand 210 x 42 x 37mm (8.3 x 1.7 x 1.5”)
Standard wand 175mm (6.9”) long (including sponge)
Weight 610g (21oz) including wand, cable and batteries
Packing List Pinhole Detector, standard wand and flat sponge, 4m (13’ 2”) return lead with crocodile clip, 3 x AA (LR1600) batteries and operating instructions
Calibration Certificate supplied as standard.
Standards
Elcometer 270 Pinhole Detector

AS 3894.2, ASTM D 5162-A, ASTM G6, ASTM G62-A, BS 7793-2, ISO 29601:2011, ISO 8289-A, ISO 14654, JIS K 6766, NACE RP 0188, NACE SP 0188, NACE TM0384

Standards in grey have been superseded but are still recognised in some industries.

Part Numbers
Elcometer 270 Pinhole Detector
  • Elcometer 270/3 Pinhole Detector

    The Elcometer 270 Pinhole Detector is a high quality, low voltage detector and is supplied with similar accessories to a high voltage spark tester.

    • Voltage: 9V and 90V
    • Part Number : D270----3
    • Certification : No Certificate
    • Part Number : D270----3C
    • Certification : Calibration Certificate
  • Elcometer 270/4 Pinhole Detector

    The Elcometer 270 Pinhole Detector is a high quality, low voltage detector and is supplied with similar accessories to a high voltage spark tester.

    • Voltage: 9V, 67.5V and 90V
    • Part Number : D270----4
    • Certification : No Certificate
    • Part Number : D270----4C
    • Certification : Calibration Certificate
   
Accessories
Elcometer 270 Pinhole Detector
  • Part Number: T27018191
  • Part Number: T27016867
  • Part Number: T27018050
  • Part Number: T27016960
  • Part Number: T27018051
  • Part Number: T27016998
  • Part Number: T27016999
  • Part Number: T27016965
  • Part Number: T99916954
  • Part Number: T99916996
  • Part Number: T27018024