Elcometer Protective Inspection Kit for Hazardous Areas

  • Protective Coatings
hazardous-areas-kit-small
Elcometer-116-Whirling-Hygrometer-small

The Elcometer Hazardous Area Inspection Kit is a protective coating inspection kit suitable for use in hazardous areas where electronic equipment is prohibited.

  • Summary
    • Summary

    • The kit provides all the tools required for the on-site inspection of a coating, including surface profile, dewpoint, relative humidity, both wet and dry film thickness and also adhesive testing.

      Measurement parameters include:

      • Surface inspection
      • Surface profile
      • Surface contamination
      • Climatic conditions
      • Coating thickness
      • Adhesion

      The products contained in this kit are not tested and approved for use in Hazardous Areas. Site Management should be consulted before this kit is used.

  • Key Features
  • Technical Information
    • Technical Specification
      Elcometer Protective Inspection Kit for Hazardous Areas
      Part Number Description
      Metric Imperial  
      YKIT-HAZARD-1M YKIT-HAZARD-1E Elcometer Hazardous Area Inspection Kit
      Dimensions 495 x 420 x 175mm (19.49 x 16.54 x 6.89”)
      Part Number
      Metric Imperial
      YKIT-HAZARD-1M YKIT-HAZARD-1E
      Description Elcometer Hazardous Area Inspection Kit
      Dimensions 495 x 420 x 175mm (19.49 x 16.54 x 6.89”)
  • Standards
    • Standards
      Elcometer Protective Inspection Kit for Hazardous Areas

      AS 1580.408.4, AS 2331.1.3, AS 3894.3-A, AS 3894.5, AS 3894.9, AS/NZS 1580.107.3, AS/NZS 1580.108.1, ASTM B 499, ASTM D 2200, ASTM D 3359-B, ASTM D 4414-A, ASTM D 4417-A, ASTM D 4417-C, ASTM G 12, BS 3900-C5-6A, BS 3900-C5-7B, BS 3900-E6, BS 5411-11, BS 7079-C5, DIN 50981, ECCA T6, EN 13523-6, IMO MSC.215(82), IMO MSC.244(83), ISO 16276-2, ISO 2178, ISO 2409, ISO 2808-1A, ISO 2808-6A, ISO 2808-7A, ISO 2808-7B, ISO 8501-1, ISO 8503-1, ISO 8502-5, ISO 8503-2, ISO 8503-5, JIS K 5600-1-7, JIS K 5600-5-6, NACE RP0287, NF T30-038, NF T 30-124, NF T30-125, SS 55900, SSPC Guide 15, SSPC-PA2, SSPC VIS 1, SSPC VIS 2, SSPC VIS 3, SSPC VIS 4, SSPC VIS 5, US Navy NSI 009-32, US Navy PPI 63101-000

      Standards in grey have been superseded but are still recognised in some industries.

  • Downloads
    • Downloads
      • Elcometer Protective Inspection Kit for Hazardous Areas Datasheet

  • Part Numbers
    • Part Numbers
      Elcometer Protective Inspection Kit for Hazardous Areas
      • Elcometer Hazardous Area Inspection Kit - Metric

        The Elcometer Hazardous Area Inspection Kit is a protective coating inspection kit suitable for use in hazardous areas where electronic equipment is prohibited. This has dimensions of 495 x 420 x 175mm .

        • Dimensions: 495 x 420 x 175mm (19.49 x 16.54 x 6.89”)
        • Part Number : YKIT-HAZARD-1M
        • Certification : No Certificate
      • Elcometer Hazardous Area Inspection Kit - Imperial

        The Elcometer Hazardous Area Inspection Kit is a protective coating inspection kit suitable for use in hazardous areas where electronic equipment is prohibited. This has dimensions of 19.49 x 16.54 x 6.89”.

        • Dimensions: 495 x 420 x 175mm (19.49 x 16.54 x 6.89”)
        • Part Number : YKIT-HAZARD-1E
        • Certification : No Certificate

Elcometer Protective Inspection Kit for Hazardous Areas

  • Protective Coatings
hazardous-areas-kit-small
Elcometer-116-Whirling-Hygrometer-small

The Elcometer Hazardous Area Inspection Kit is a protective coating inspection kit suitable for use in hazardous areas where electronic equipment is prohibited.

Summary

Elcometer Protective Inspection Kit for Hazardous Areas

The kit provides all the tools required for the on-site inspection of a coating, including surface profile, dewpoint, relative humidity, both wet and dry film thickness and also adhesive testing.

Measurement parameters include:

• Surface inspection
• Surface profile
• Surface contamination
• Climatic conditions
• Coating thickness
• Adhesion

The products contained in this kit are not tested and approved for use in Hazardous Areas. Site Management should be consulted before this kit is used.

Downloads
  • Elcometer Protective Inspection Kit for Hazardous Areas Datasheet

Key Features

Elcometer Protective Inspection Kit for Hazardous Areas

Kit Contents:

ModelDescription
Elcometer 128Pictorial Standards¹
Elcometer 125Surface Comparator, Grit
Elcometer 125Surface Comparator, Shot
Elcometer 122Testex Tape, Coarse
Elcometer 122Testex Tape, Extra Coarse
Elcometer 124Testex Dial Thickness Gauge
Elcometer 131/1CTelescopic Inspection Mirror
Elcometer 134Chlor*Test Surface Testing Kit
Elcometer 113Magnetic Thermometer °C (°F)
Elcometer 116Whirling Hygrometer °C (Metric), Sling Hygrometer °F (Imperial)
Elcometer 114Dewpoint Calculator
Elcometer 112Hexagonal Wet Film Comb: 25 -3000µm (1 - 120mils)
Elcometer 211Thickness Gauge
Elcometer 107Cross Hatch Full Kit - ISO (ASTM) Tape, Brush & Eye Glass

¹ Swedish Rust Standard ISO 8501, SIS055900 supplied in Metric Kit, US Standard SSPC VIS 1-01 and VIS-3 supplied in Imperial Kit

Technical Specification
Elcometer Protective Inspection Kit for Hazardous Areas
Part Number Description
Metric Imperial  
YKIT-HAZARD-1M YKIT-HAZARD-1E Elcometer Hazardous Area Inspection Kit
Dimensions 495 x 420 x 175mm (19.49 x 16.54 x 6.89”)
Part Number
Metric Imperial
YKIT-HAZARD-1M YKIT-HAZARD-1E
Description Elcometer Hazardous Area Inspection Kit
Dimensions 495 x 420 x 175mm (19.49 x 16.54 x 6.89”)
Standards
Elcometer Protective Inspection Kit for Hazardous Areas

AS 1580.408.4, AS 2331.1.3, AS 3894.3-A, AS 3894.5, AS 3894.9, AS/NZS 1580.107.3, AS/NZS 1580.108.1, ASTM B 499, ASTM D 2200, ASTM D 3359-B, ASTM D 4414-A, ASTM D 4417-A, ASTM D 4417-C, ASTM G 12, BS 3900-C5-6A, BS 3900-C5-7B, BS 3900-E6, BS 5411-11, BS 7079-C5, DIN 50981, ECCA T6, EN 13523-6, IMO MSC.215(82), IMO MSC.244(83), ISO 16276-2, ISO 2178, ISO 2409, ISO 2808-1A, ISO 2808-6A, ISO 2808-7A, ISO 2808-7B, ISO 8501-1, ISO 8503-1, ISO 8502-5, ISO 8503-2, ISO 8503-5, JIS K 5600-1-7, JIS K 5600-5-6, NACE RP0287, NF T30-038, NF T 30-124, NF T30-125, SS 55900, SSPC Guide 15, SSPC-PA2, SSPC VIS 1, SSPC VIS 2, SSPC VIS 3, SSPC VIS 4, SSPC VIS 5, US Navy NSI 009-32, US Navy PPI 63101-000

Standards in grey have been superseded but are still recognised in some industries.

Part Numbers
Elcometer Protective Inspection Kit for Hazardous Areas
  • Elcometer Hazardous Area Inspection Kit - Metric

    The Elcometer Hazardous Area Inspection Kit is a protective coating inspection kit suitable for use in hazardous areas where electronic equipment is prohibited. This has dimensions of 495 x 420 x 175mm .

    • Dimensions: 495 x 420 x 175mm (19.49 x 16.54 x 6.89”)
    • Part Number : YKIT-HAZARD-1M
    • Certification : No Certificate
  • Elcometer Hazardous Area Inspection Kit - Imperial

    The Elcometer Hazardous Area Inspection Kit is a protective coating inspection kit suitable for use in hazardous areas where electronic equipment is prohibited. This has dimensions of 19.49 x 16.54 x 6.89”.

    • Dimensions: 495 x 420 x 175mm (19.49 x 16.54 x 6.89”)
    • Part Number : YKIT-HAZARD-1E
    • Certification : No Certificate