Elcometer 3092 Sclerometer Hardness Tester

  • Industrial Finishing
3092-intro-image
3092-intro-image1

The Elcometer 3092 Sclerometer Hardness Tester measures the hardness of a coating by moving a Tungsten Carbide Tip over the coating with a predetermined force.

  • Summary
    • Summary

    • The Elcometer 3092 tests the hardness of a coating by moving a Tungsten Carbide Tip over the coating with a predetermined force.

      The body of the instrument contains a cursor fitted with a screw lock and a round tip, compressed by one of the four springs corresponding to the four printed scales:

      • Grey spring:  0-3N (0.671lbF)
      • Red spring:  0-10N (2.248lbF)
      • Blue spring:  0-20N (4.49lbF)
      • Green spring:  0-30N (6.74lbF)

      The spring force can be set by the “collar”; compressing the spring increases the force with which the tip is pushed onto the surface of the test piece. By making short, straight movements while gradually increasing the load, the user can observe the force at which the tip leaves a mark or destroys the coating.

      Each Elcometer 3092 is supplied in a case with a 0.75mm (0.03”) diameter tungsten carbide tip and 3 springs (grey, red and blue). An optional green spring of 0 to 30N is also available to order separately.

  • Technical Information
    • Technical Specification
      Elcometer 3092 Sclerometer Hardness Tester
      Part Number Description
      K0003092M201 Elcometer 3092 Sclerometer Hardness Testers - 3 ranges
      Dimensions 165 x 24 x 16mm (6.5 x 1 x 0.6”)
      Weight 370g (13oz)
      Packing List Elcometer 3092 Sclerometer, tool with 0.75mm (0.03”) diameter tungsten carbide tip, 3 springs (grey, red and blue), carry case and operating instructions
  • Standards
    • Standards
      Elcometer 3092 Sclerometer Hardness Tester

      AS 3894.4, EN 438-2, ISO 4586-2

  • Downloads
    • Downloads
      • Elcometer 3092 Sclerometer Hardness Tester Instruction Manual

      • Elcometer 3092 Sclerometer Hardness Tester Datasheet

  • Part Numbers
    • Part Numbers
      Elcometer 3092 Sclerometer Hardness Tester
      • Elcometer 3092 Sclerometer Hardness Tester

        The Elcometer 3092 Sclerometer Hardness Tester measures the hardness of a coating by moving a Tungsten Carbide Tip over the coating with a predetermined force.

        • Part Number : K0003092M201
        • Certification : No Certificate
  • Accessories
    • Accessories
      Elcometer 3092 Sclerometer Hardness Tester
      • Part NumberKT003092P001
      • Part NumberKT003092P002
      • Part NumberKT003092P003
      • Part NumberKT003092P008
      • Part NumberKT003092P004
      • Part NumberKT003092P005
      • Part NumberKT003092P006
      • Part NumberKT003092P007

Elcometer 3092 Sclerometer Hardness Tester

  • Industrial Finishing
3092-intro-image
3092-intro-image1

The Elcometer 3092 Sclerometer Hardness Tester measures the hardness of a coating by moving a Tungsten Carbide Tip over the coating with a predetermined force.

Summary

Elcometer 3092 Sclerometer Hardness Tester

The Elcometer 3092 tests the hardness of a coating by moving a Tungsten Carbide Tip over the coating with a predetermined force.

The body of the instrument contains a cursor fitted with a screw lock and a round tip, compressed by one of the four springs corresponding to the four printed scales:

  • Grey spring:  0-3N (0.671lbF)
  • Red spring:  0-10N (2.248lbF)
  • Blue spring:  0-20N (4.49lbF)
  • Green spring:  0-30N (6.74lbF)

The spring force can be set by the “collar”; compressing the spring increases the force with which the tip is pushed onto the surface of the test piece. By making short, straight movements while gradually increasing the load, the user can observe the force at which the tip leaves a mark or destroys the coating.

Each Elcometer 3092 is supplied in a case with a 0.75mm (0.03”) diameter tungsten carbide tip and 3 springs (grey, red and blue). An optional green spring of 0 to 30N is also available to order separately.

Downloads
  • Elcometer 3092 Sclerometer Hardness Tester Instruction Manual

  • Elcometer 3092 Sclerometer Hardness Tester Datasheet

Technical Specification
Elcometer 3092 Sclerometer Hardness Tester
Part Number Description
K0003092M201 Elcometer 3092 Sclerometer Hardness Testers - 3 ranges
Dimensions 165 x 24 x 16mm (6.5 x 1 x 0.6”)
Weight 370g (13oz)
Packing List Elcometer 3092 Sclerometer, tool with 0.75mm (0.03”) diameter tungsten carbide tip, 3 springs (grey, red and blue), carry case and operating instructions
Standards
Elcometer 3092 Sclerometer Hardness Tester

AS 3894.4, EN 438-2, ISO 4586-2

Part Numbers
Elcometer 3092 Sclerometer Hardness Tester
  • Elcometer 3092 Sclerometer Hardness Tester

    The Elcometer 3092 Sclerometer Hardness Tester measures the hardness of a coating by moving a Tungsten Carbide Tip over the coating with a predetermined force.

    • Part Number : K0003092M201
    • Certification : No Certificate
   
Accessories
Elcometer 3092 Sclerometer Hardness Tester
  • Part Number: KT003092P001
  • Part Number: KT003092P002
  • Part Number: KT003092P003
  • Part Number: KT003092P008
  • Part Number: KT003092P004
  • Part Number: KT003092P005
  • Part Number: KT003092P006
  • Part Number: KT003092P007