Elcometer 3080 Pencil Hardness Tester

  • Industrial Finishing
3080-intro-image

The set of Elcometer 3080 Hardness Testing Pencils provide a simple but effective technique to evaluate the hardness of many coatings.

  • Summary
    • Summary

    • The pencil lead, sharpened beforehand by using the special pencil sharpener and rubbing it on fine abrasive paper (400 grade), is maintained at an angle of 45° and pushed with uniform pressure on to the sample, leaving either a superficial trace or causing destruction down to the substrate.

      The Elcometer 3080 Pencil Hardness Tester is supplied complete with stand and a series of 14 pencils, ranging from 6B to 6H hardness values.

  • Technical Information
    • Technical Specification
      Elcometer 3080 Pencil Hardness Tester
      Part Number Description
      K0003080M203 Elcometer 3080 6B to 6H Pencil Hardness Tester with Stand
      Dimensions 330 x 280 x 330mm (13 x 11 x 13”)
      Weight 1kg (2.2lb)
      Packing List Elcometer 3080 Pencil Hardness Tester, Pencil set - (14 x pencils, grades 6B - 6H), 2 x pencil sharpeners, abrasive paper block, storage stand and operating instructions
  • Standards
    • Standards
      Elcometer 3080 Pencil Hardness Tester

      ASTM D 3363, ECCA T4, EN 13523-4, ISO 15184:2012, JIS K 5600-5-4

      Standards in grey have been superseded but are still recognised in some industries.

  • Downloads
    • Downloads
      • Elcometer 3080 Pencil Hardness Tester Instruction Manual

      • Elcometer 3080 Pencil Hardness Tester Datasheet

  • Part Numbers
    • Part Numbers
      Elcometer 3080 Pencil Hardness Tester
      • Elcometer 3080 Pencil Hardness Tester

        The Elcometer 3080 Pencil Hardness Tester is supplied complete with stand and a series of 14 pencils, ranging from 6B to 6H hardness values.

        • Part Number : K0003080M203
        • Certification : No Certificate
  • Accessories
    • Accessories
      Elcometer 3080 Pencil Hardness Tester
      • Part NumberT99923042-1
      • Part NumberT99923042-2
      • Part NumberT99923042-3
      • Part NumberT99923042-4
      • Part NumberT99923042-5
      • Part NumberT99923042-6
      • Part NumberT99923042-7
      • Part NumberT99923039
      • Part NumberT99923040-1
      • Part NumberT99923040-2
      • Part NumberT99923042-8
      • Part NumberT99923042-9
      • Part NumberT99923042-10
      • Part NumberT99923042-11
      • Part NumberT99923042-12
      • Part NumberT99923042-13
      • Part NumberT99923042-14

Elcometer 3080 Pencil Hardness Tester

  • Industrial Finishing
3080-intro-image

The set of Elcometer 3080 Hardness Testing Pencils provide a simple but effective technique to evaluate the hardness of many coatings.

Summary

Elcometer 3080 Pencil Hardness Tester

The pencil lead, sharpened beforehand by using the special pencil sharpener and rubbing it on fine abrasive paper (400 grade), is maintained at an angle of 45° and pushed with uniform pressure on to the sample, leaving either a superficial trace or causing destruction down to the substrate.

The Elcometer 3080 Pencil Hardness Tester is supplied complete with stand and a series of 14 pencils, ranging from 6B to 6H hardness values.

Downloads
  • Elcometer 3080 Pencil Hardness Tester Instruction Manual

  • Elcometer 3080 Pencil Hardness Tester Datasheet

Technical Specification
Elcometer 3080 Pencil Hardness Tester
Part Number Description
K0003080M203 Elcometer 3080 6B to 6H Pencil Hardness Tester with Stand
Dimensions 330 x 280 x 330mm (13 x 11 x 13”)
Weight 1kg (2.2lb)
Packing List Elcometer 3080 Pencil Hardness Tester, Pencil set - (14 x pencils, grades 6B - 6H), 2 x pencil sharpeners, abrasive paper block, storage stand and operating instructions
Standards
Elcometer 3080 Pencil Hardness Tester

ASTM D 3363, ECCA T4, EN 13523-4, ISO 15184:2012, JIS K 5600-5-4

Standards in grey have been superseded but are still recognised in some industries.

Part Numbers
Elcometer 3080 Pencil Hardness Tester
  • Elcometer 3080 Pencil Hardness Tester

    The Elcometer 3080 Pencil Hardness Tester is supplied complete with stand and a series of 14 pencils, ranging from 6B to 6H hardness values.

    • Part Number : K0003080M203
    • Certification : No Certificate
   
Accessories
Elcometer 3080 Pencil Hardness Tester
  • Part Number: T99923042-1
  • Part Number: T99923042-2
  • Part Number: T99923042-3
  • Part Number: T99923042-4
  • Part Number: T99923042-5
  • Part Number: T99923042-6
  • Part Number: T99923042-7
  • Part Number: T99923039
  • Part Number: T99923040-1
  • Part Number: T99923040-2
  • Part Number: T99923042-8
  • Part Number: T99923042-9
  • Part Number: T99923042-10
  • Part Number: T99923042-11
  • Part Number: T99923042-12
  • Part Number: T99923042-13
  • Part Number: T99923042-14