

Elcometer 3000 Motorised Clemen Unit
- Industrial Finishing

The Elcometer 3000 Motorised Clemen Unit is a robust and accurate instrument for evaluating the resistance to scratching of a coated surface. The sample can be metal, wood, glass, plastic or other hard materials.
- Summary
-
Summary
-
A tool is fitted with a hemispherical tip of 1mm (0.04”) diameter (standard), lowered gradually onto the sample surface which is then pulled linearly 60mm (2.36”).
As the sample is pulled the tool lowers automatically onto the sample, moves along the sample and gently rises up at the end of the stroke.
To ensure consistent, repeatable and reproducible tests, the Motorized Clemen Unit automatically brings the tool gently in contact with the sample, moves across the coating and then lifts it with the automatic Start/Stop function. Depending on the load applied, varying degrees of penetration of the tool into the coating are observed - from a superficial trace to total destruction.
If the coating is completely removed during the test, the contact of the tool with the metallic substrate is indicated by a lamp and voltmeter indicator.
-
- Technical Information
-
Technical SpecificationElcometer 3000 Motorised Clemen Unit
Part Number Description Certificate K3000M003 Elcometer 3000 Motorised Clemen Unit Load Range 0 - 5kg (0 - 11lb) Sample Width 75 x 150mm (3 x 6”) Sample Thickness Standard: 0.5 - 3mm (0.02 - 0.12”)
Extended*: 5 - 20mm (0.2 - 0.8”)Operating Temperature 5 to 40°C (41 to 104°F) Humidity Range Not to exceed 80% relative humidity up to 31°C (88°F), decreasing linearly to 50% at 40°C (104°F). Dimensions 460 x 280 x 330mm (18 x 11 x 13”) Weight 20kg (44lb) Packing List Elcometer 3000 Motorised Clemen Unit, 1kg weight (x 4), tungsten carbide ball tool; 1mm (0.04”), mains leads (UK, EUR and US) and operating instructions. * Using the optional Adjustment Kit
○ Optional Calibration Certificate available.
-
- Standards
-
StandardsElcometer 3000 Motorised Clemen Unit
AS/NZS 1580.403.1, BS 3900-E2, DIN 53799, ECCA T12, EN 13523-12, ISO 1518-1:2019, JIS K 5600-5-5
Standards in grey have been superseded but are still recognised in some industries
-
- Downloads
-
Downloads
- Part Numbers
-
Part NumbersElcometer 3000 Motorised Clemen UnitNo data found!!
-
Elcometer 3000 Motorised Clemen Unit
- Part Number : K3000M003
-
Elcometer 3000 Motorised Clemen Unit
- Part Number : K3000M003C
- Accessories
-
AccessoriesElcometer 3000 Motorised Clemen Unit
- Part Number: KT007210M001
- Part Number: KT003025P007
- Part Number: KT003000P021
- Part Number: KT003000N001
- Part Number: KT003000N013
- Part Number: KT003000N015
-
- Home
- Coatings Inspection
- Coatings Inspection Division
- Hardness & Scratch Resistance
- Elcometer 3000 Motorised Clemen Unit
Elcometer 3000 Motorised Clemen Unit
- Industrial Finishing
The Elcometer 3000 Motorised Clemen Unit is a robust and accurate instrument for evaluating the resistance to scratching of a coated surface. The sample can be metal, wood, glass, plastic or other hard materials.
Summary
Elcometer 3000 Motorised Clemen Unit
A tool is fitted with a hemispherical tip of 1mm (0.04”) diameter (standard), lowered gradually onto the sample surface which is then pulled linearly 60mm (2.36”).
As the sample is pulled the tool lowers automatically onto the sample, moves along the sample and gently rises up at the end of the stroke.
To ensure consistent, repeatable and reproducible tests, the Motorized Clemen Unit automatically brings the tool gently in contact with the sample, moves across the coating and then lifts it with the automatic Start/Stop function. Depending on the load applied, varying degrees of penetration of the tool into the coating are observed - from a superficial trace to total destruction.
If the coating is completely removed during the test, the contact of the tool with the metallic substrate is indicated by a lamp and voltmeter indicator.
Technical SpecificationElcometer 3000 Motorised Clemen UnitPart Number Description Certificate K3000M003 Elcometer 3000 Motorised Clemen Unit Load Range 0 - 5kg (0 - 11lb) Sample Width 75 x 150mm (3 x 6”) Sample Thickness Standard: 0.5 - 3mm (0.02 - 0.12”)
Extended*: 5 - 20mm (0.2 - 0.8”)Operating Temperature 5 to 40°C (41 to 104°F) Humidity Range Not to exceed 80% relative humidity up to 31°C (88°F), decreasing linearly to 50% at 40°C (104°F). Dimensions 460 x 280 x 330mm (18 x 11 x 13”) Weight 20kg (44lb) Packing List Elcometer 3000 Motorised Clemen Unit, 1kg weight (x 4), tungsten carbide ball tool; 1mm (0.04”), mains leads (UK, EUR and US) and operating instructions. * Using the optional Adjustment Kit
○ Optional Calibration Certificate available.StandardsElcometer 3000 Motorised Clemen UnitAS/NZS 1580.403.1, BS 3900-E2, DIN 53799, ECCA T12, EN 13523-12, ISO 1518-1:2019, JIS K 5600-5-5
Standards in grey have been superseded but are still recognised in some industries
Part NumbersElcometer 3000 Motorised Clemen UnitNo data found!!-
Elcometer 3000 Motorised Clemen Unit
- Part Number : K3000M003
-
Elcometer 3000 Motorised Clemen Unit
- Part Number : K3000M003C
AccessoriesElcometer 3000 Motorised Clemen Unit- Part Number: KT007210M001
- Part Number: KT003025P007
- Part Number: KT003000P021
- Part Number: KT003000N001
- Part Number: KT003000N013
- Part Number: KT003000N015
- Part Numbers
-