Elcometer 3000 Manual Clemen Unit
- Industrial Finishing


The Elcometer 3000 Manual Clemen Unit is a robust and simple to use instrument for evaluating the resistance to scratching of a coated surface.
Elcometer 3000 Manual Clemen Unit
- Industrial Finishing


The Elcometer 3000 Manual Clemen Unit is a robust and simple to use instrument for evaluating the resistance to scratching of a coated surface.
Summary

Elcometer 3000 Manual Clemen Unit
A tool is fitted with a hemispherical tip of 1mm (0.04”) diameter (standard), lowered gradually onto the sample surface which is then pulled linearly 60mm (2.36”).
Depending on the load applied, varying degrees of penetration of the tool into the coating can be observed - from a superficial trace to total destruction.
Technical Specification
Elcometer 3000 Manual Clemen Unit
Part Number | Description | Certificate |
K0003000M001 | Elcometer 3000 Manual Clemen Unit | ![]() |
Sample Width | 75mm (2.95”) | |
Variable Load | 0 - 2000g (70.5oz) | |
Dimensions | 410 x 200 x 155mm (16.1 x 7.9 x 6.1”) | |
Weight | 6kg (13.2lb) | |
Packing List | Elcometer 3000 Manual, 1mm (0.04”) ball tool and operating instructions |
○ Optional Calibration Certificate available.
Standards
Elcometer 3000 Manual Clemen Unit
AS/NZS 1580.403.1, BS 3900-E2, DIN 53799, ECCA T12, EN 13523-12, ISO 1518-1:2019, JIS K 5600-5-5
Standards in grey have been superseded but are still recognised in some industries
Part Numbers
Elcometer 3000 Manual Clemen Unit
-
Elcometer 3000 Manual Clemen Unit
The Elcometer 3000 Manual Clemen Unit is a robust and simple to use instrument for evaluating the resistance to scratching of a coated surface.
- Part Number : K0003000M001
- Certification : No Certificate
- Part Number : K0003000M001C
- Certification : Calibration Certificate
Accessories
Elcometer 3000 Manual Clemen Unit
- Part Number: KT007210M001
- Part Number: KT003025P007
- Part Number: KT003000P021
- Part Number: KT003000N001
- Part Number: KT003000N013
- Part Number: KT003000N015