Elcometer 6910/3 Setaflash 'Series 3' Active-Cool Closed Cup Tester

  • Industrial Finishing
6910-active-cool
6910-active-cool-close-up

The Elcometer 6910/3 Setaflash ‘Series 3’ Active-Cool Closed Cup Tester offers the same features as the Elcometer 6910/1 Setaflash but is fitted with a cup suitable for testing corrosive samples.

  • Summary
    • Summary

    • This closed cup tester has been designed to carry out flash/no flash tests rapidly and efficiently to determine the flash point of liquids and semi-solids in the 10°C to 130°C (50°F to 266°F) temperature range. A sample cup is heated and then cooled by Peltier cells. This gives very accurate and stable sub-ambient test temperatures and the benefit of rapid temperature normalisation between tests.

      Flash point is automatically detected using a thermally activated detector, reducing the risk of operator error and minimising the potential danger of inhaling fumes during a test. A rechargeable gas tank with on/off switch and fine adjustment are integral to the unit.

      • Flash/No Flash & Ramp Modes
      • Flash point test in less than 2 minutes
      • Small sample size, 2ml (0.067fl oz) or 4ml (0.135fl oz)
      • Automatic flash detection
      • Electronic Peltier cooling
      • Audible and on-screen prompts
      • Portable
      • Corrosion resistant cup insert
  • Technical Information
    • Technical Specification
      Elcometer 6910/3 Setaflash 'Series 3' Active-Cool Closed Cup Tester
      Part Number Description Certificate
      K6910M013 Elcometer 6910/3 Setaflash 'Series 3' Active-Cool Closed Cup Tester
      Optional Calibration Certificate available
      Temperature Range 10°C to 135°C (50°F to 275°F)
      Test Modes Rapid Equilibrium and Ramp
      Sample Size 2ml (0.067fl oz) for flash points up to 100°C (212°F)
      4ml (0.135fl oz) for flash points above 100°C (212°F)
      Test Duration 1 minute below 100°C, 2 minutes above 100°C, or user determined 1 to 99 minutes
      Ramp Rate 2°C/min ramp (3.6°F/min ramp)
      Cup Material Corrosion resistant steel insert
      Dimensions 195 x 295 x 140mm (7.6 x 11.6 x 5.5”)
      Weight 3kg (6.6lb)
      Packing List Elcometer 6910 Setaflash 'Series 3' Active-Cool Closed Cup Tester, 2ml (0.067fl oz) syringe, gas valve & cap, power supply, mains power cable, 2mm Allen Key, quality assurance certificate, warranty registration form and operating instructions
      Optional Calibration Certificate available.
  • Standards
    • Standards
      Elcometer 6910/3 Setaflash 'Series 3' Active-Cool Closed Cup Tester

      ASTM D1655, ASTM D3278, ASTM D3828, ASTM D7236, ASTM E502, BS 2000-523, DEF STAN 91-91, EPA 1020 A & B, ISO 3679, ISO 3680, UN Class 3 Non-viscous Flammable Liquids

      Standards in grey have been superseded but are still recognised in some industries.

  • Downloads
    • Downloads
      • Elcometer 6910 Setaflash 'Series 3' Datasheet

  • Part Numbers
    • Part Numbers
      Elcometer 6910/3 Setaflash 'Series 3' Active-Cool Closed Cup Tester
      • Elcometer 6910/3 Setaflash 'Series 3' Active-Cool Closed Cup Tester

        The Elcometer 6910/3 Setaflash ‘Series 3’ Active-Cool Closed Cup Tester offers the same features as the Elcometer 6910/1 Setaflash but is fitted with a cup suitable for testing corrosive samples.

        • Part Number : K6910M013
        • Certification : No Certificate
  • Accessories
    • Accessories
      Elcometer 6910/3 Setaflash 'Series 3' Active-Cool Closed Cup Tester
      • Part NumberKT006910N009

Elcometer 6910/3 Setaflash 'Series 3' Active-Cool Closed Cup Tester

  • Industrial Finishing
6910-active-cool
6910-active-cool-close-up

The Elcometer 6910/3 Setaflash ‘Series 3’ Active-Cool Closed Cup Tester offers the same features as the Elcometer 6910/1 Setaflash but is fitted with a cup suitable for testing corrosive samples.

Summary

Elcometer 6910/3 Setaflash 'Series 3' Active-Cool Closed Cup Tester

This closed cup tester has been designed to carry out flash/no flash tests rapidly and efficiently to determine the flash point of liquids and semi-solids in the 10°C to 130°C (50°F to 266°F) temperature range. A sample cup is heated and then cooled by Peltier cells. This gives very accurate and stable sub-ambient test temperatures and the benefit of rapid temperature normalisation between tests.

Flash point is automatically detected using a thermally activated detector, reducing the risk of operator error and minimising the potential danger of inhaling fumes during a test. A rechargeable gas tank with on/off switch and fine adjustment are integral to the unit.

  • Flash/No Flash & Ramp Modes
  • Flash point test in less than 2 minutes
  • Small sample size, 2ml (0.067fl oz) or 4ml (0.135fl oz)
  • Automatic flash detection
  • Electronic Peltier cooling
  • Audible and on-screen prompts
  • Portable
  • Corrosion resistant cup insert
Downloads
  • Elcometer 6910 Setaflash 'Series 3' Datasheet

Technical Specification
Elcometer 6910/3 Setaflash 'Series 3' Active-Cool Closed Cup Tester
Part Number Description Certificate
K6910M013 Elcometer 6910/3 Setaflash 'Series 3' Active-Cool Closed Cup Tester
Optional Calibration Certificate available
Temperature Range 10°C to 135°C (50°F to 275°F)
Test Modes Rapid Equilibrium and Ramp
Sample Size 2ml (0.067fl oz) for flash points up to 100°C (212°F)
4ml (0.135fl oz) for flash points above 100°C (212°F)
Test Duration 1 minute below 100°C, 2 minutes above 100°C, or user determined 1 to 99 minutes
Ramp Rate 2°C/min ramp (3.6°F/min ramp)
Cup Material Corrosion resistant steel insert
Dimensions 195 x 295 x 140mm (7.6 x 11.6 x 5.5”)
Weight 3kg (6.6lb)
Packing List Elcometer 6910 Setaflash 'Series 3' Active-Cool Closed Cup Tester, 2ml (0.067fl oz) syringe, gas valve & cap, power supply, mains power cable, 2mm Allen Key, quality assurance certificate, warranty registration form and operating instructions
Optional Calibration Certificate available.
Standards
Elcometer 6910/3 Setaflash 'Series 3' Active-Cool Closed Cup Tester

ASTM D1655, ASTM D3278, ASTM D3828, ASTM D7236, ASTM E502, BS 2000-523, DEF STAN 91-91, EPA 1020 A & B, ISO 3679, ISO 3680, UN Class 3 Non-viscous Flammable Liquids

Standards in grey have been superseded but are still recognised in some industries.

Part Numbers
Elcometer 6910/3 Setaflash 'Series 3' Active-Cool Closed Cup Tester
  • Elcometer 6910/3 Setaflash 'Series 3' Active-Cool Closed Cup Tester

    The Elcometer 6910/3 Setaflash ‘Series 3’ Active-Cool Closed Cup Tester offers the same features as the Elcometer 6910/1 Setaflash but is fitted with a cup suitable for testing corrosive samples.

    • Part Number : K6910M013
    • Certification : No Certificate
   
Accessories
Elcometer 6910/3 Setaflash 'Series 3' Active-Cool Closed Cup Tester
  • Part Number: KT006910N009