Elcometer 2020 Fineness of Grind Gauges
- Industrial Finishing
- Laboratory & Physical Test
The Elcometer 2020 Fineness of Grind Gauges is used to determine the particle size and fineness of grind of many materials including paints, pigments, inks, coatings, chocolates and other similar products.
- Summary
-
Summary
-
These two channel gauges, are made of hardened stainless steel and have two grooves with a graded slope (dependent on the model chosen).
Graduated in microns, mils, NS (Hegman) or PCU (North), the gauges have an accuracy of ±3μm (0.12mil) or ±5% whichever is the greater. The groove width for all models is 12mm (0.47”) with a groove length of 127mm (5.0”).
-
- Key Features
-
Key Features
Elcometer 2020 Fineness of Grind Gauges
How to use a Fineness of Grind Gauge
The material is placed on the deepest part of the groove and, using the scraper provided, drawn up the slope - the particle size is indicated where the material stops.
-
- Technical Information
-
Technical SpecificationElcometer 2020 Fineness of Grind Gauges
Part Number Model Range Graduation Hegman Paint Club Certificate Metric Imperial (μm) (mils) (μm) (mils) (NS or H) (PCU) K0002020M003 - Elcometer 2020/3 0 - 15 - 1.5 - 8 - 7 10 - 9 
K0002020M004 K0US2020M004 Elcometer 2020/4 0 - 25 0 - 1 2.5 0.1 8 - 6 10 - 8
K0002020M001 K0US2020M001 Elcometer 2020/1 0 - 50 0 - 2 5 0.2 8 - 4 10 - 5
K0002020M002 K0US2020M002 Elcometer 2020/2 0 - 100 0 - 4 10 0.5 8 - 0 10 - 0
Packed Dimensions 180 x 40 x 12mm (7.1 x 1.6 x 0.5”) Packed Weight 1.36kg (3lb) Packing List Elcometer 2020 Fineness of Grind Gauge, scraper, plastic case and operating instructions Part Number Metric K0002020M003 Imperial - Model Elcometer 2020/3 Certificate
Range (μm) : 0 - 15 (mils) : - Graduation (μm) : 1.5 (mils) : - Hegman(NS or H) 8 - 7 Paint Club(PCU) 10 - 9 Metric K0002020M004 Imperial K0US2020M004 Model Elcometer 2020/4 Certificate
Range (μm) : 0 - 25 (mils) : 0 - 1 Graduation (μm) : 2.5 (mils) : 0.1 Hegman(NS or H) 8 - 6 Paint Club(PCU) 10 - 8 Metric K0002020M001 Imperial K0US2020M001 Model Elcometer 2020/1 Certificate
Range (μm) : 0 - 50 (mils) : 0 - 2 Graduation (μm) : 5 (mils) : 0.2 Hegman(NS or H) 8 - 4 Paint Club(PCU) 10 - 5 Metric K0002020M002 Imperial K0US2020M002 Model Elcometer 2020/2 Certificate
Range (μm) : 0 - 100 (mils) : 0 - 4 Graduation (μm) : 10 (mils) : 0.5 Hegman(NS or H) 8 - 0 Paint Club(PCU) 10 - 0 Packed Dimensions 180 x 40 x 12mm (7.1 x 1.6 x 0.5”) Packed Weight 1.36kg (3lb) Packing List Elcometer 2020 Fineness of Grind Gauge, scraper, plastic case and operating instructions ○ Optional Calibration Certificate available.- Standards
-
StandardsElcometer 2020 Fineness of Grind Gauges
ASTM D 1210, AS/NZS 1580.204.1, DIN 53203, EN 21524, FTMS 141 4411.1, ISO 1524, JIS K 5600-2-5, NF T30-046
Standards in grey have been superseded but are still recognised in some industries
- Downloads
-
Downloads
-
Elcometer 2020 Fineness of Grind Gauge Multi-Lingual Instruction Manual
-
Elcometer 2020 Fineness of Grind Gauge Datasheet
- Part Numbers
-
Part NumbersElcometer 2020 Fineness of Grind Gauges
-
Elcometer 2020/1 Fineness of Grind Gauge - Metric- Part Number : K0002020M001
-
Elcometer 2020/1 Fineness of Grind Gauge - Metric- Part Number : K0002020M001C
-
Elcometer 2020/2 Fineness of Grind Gauge - Metric- Part Number : K0002020M002
-
Elcometer 2020/2 Fineness of Grind Gauge - Metric- Part Number : K0002020M002C
-
Elcometer 2020/3 Fineness of Grind Gauge - Metric- Part Number : K0002020M003
-
Elcometer 2020/3 Fineness of Grind Gauge - Metric- Part Number : K0002020M003C
-
Elcometer 2020/4 Fineness of Grind Gauge - Metric- Part Number : K0002020M004
-
Elcometer 2020/4 Fineness of Grind Gauge - Metric- Part Number : K0002020M004C
-
Elcometer 2020/1 Fineness of Grind Gauge - Imperial- Part Number : K0US2020M001
-
Elcometer 2020/1 Fineness of Grind Gauge - Imperial- Part Number : K0US2020M001C
-
Elcometer 2020/2 Fineness of Grind Gauge - Imperial- Part Number : K0US2020M002
-
Elcometer 2020/2 Fineness of Grind Gauge - Imperial- Part Number : K0US2020M002C
-
Elcometer 2020/4 Fineness of Grind Gauge - Imperial- Part Number : K0US2020M004
-
Elcometer 2020/4 Fineness of Grind Gauge - Imperial- Part Number : K0US2020M004C
- Accessories
-
AccessoriesElcometer 2020 Fineness of Grind Gauges
Part Number: KT002020N001
Welcome to Elcometer.tv
Your ultimate training channel -
Elcometer 2020 Fineness of Grind Gauges
- Industrial Finishing
- Laboratory & Physical Test
The Elcometer 2020 Fineness of Grind Gauges is used to determine the particle size and fineness of grind of many materials including paints, pigments, inks, coatings, chocolates and other similar products.
Summary
Elcometer 2020 Fineness of Grind Gauges
These two channel gauges, are made of hardened stainless steel and have two grooves with a graded slope (dependent on the model chosen).
Graduated in microns, mils, NS (Hegman) or PCU (North), the gauges have an accuracy of ±3μm (0.12mil) or ±5% whichever is the greater. The groove width for all models is 12mm (0.47”) with a groove length of 127mm (5.0”).
Downloads-
Elcometer 2020 Fineness of Grind Gauge Multi-Lingual Instruction Manual
-
Elcometer 2020 Fineness of Grind Gauge Datasheet
Key Features
Elcometer 2020 Fineness of Grind Gauges
How to use a Fineness of Grind Gauge
The material is placed on the deepest part of the groove and, using the scraper provided, drawn up the slope - the particle size is indicated where the material stops.
Technical SpecificationElcometer 2020 Fineness of Grind GaugesPart Number Model Range Graduation Hegman Paint Club Certificate Metric Imperial (μm) (mils) (μm) (mils) (NS or H) (PCU) K0002020M003 - Elcometer 2020/3 0 - 15 - 1.5 - 8 - 7 10 - 9
K0002020M004 K0US2020M004 Elcometer 2020/4 0 - 25 0 - 1 2.5 0.1 8 - 6 10 - 8
K0002020M001 K0US2020M001 Elcometer 2020/1 0 - 50 0 - 2 5 0.2 8 - 4 10 - 5
K0002020M002 K0US2020M002 Elcometer 2020/2 0 - 100 0 - 4 10 0.5 8 - 0 10 - 0
Packed Dimensions 180 x 40 x 12mm (7.1 x 1.6 x 0.5”) Packed Weight 1.36kg (3lb) Packing List Elcometer 2020 Fineness of Grind Gauge, scraper, plastic case and operating instructions Part Number Metric K0002020M003 Imperial - Model Elcometer 2020/3 Certificate
Range (μm) : 0 - 15 (mils) : - Graduation (μm) : 1.5 (mils) : - Hegman(NS or H) 8 - 7 Paint Club(PCU) 10 - 9 Metric K0002020M004 Imperial K0US2020M004 Model Elcometer 2020/4 Certificate
Range (μm) : 0 - 25 (mils) : 0 - 1 Graduation (μm) : 2.5 (mils) : 0.1 Hegman(NS or H) 8 - 6 Paint Club(PCU) 10 - 8 Metric K0002020M001 Imperial K0US2020M001 Model Elcometer 2020/1 Certificate
Range (μm) : 0 - 50 (mils) : 0 - 2 Graduation (μm) : 5 (mils) : 0.2 Hegman(NS or H) 8 - 4 Paint Club(PCU) 10 - 5 Metric K0002020M002 Imperial K0US2020M002 Model Elcometer 2020/2 Certificate
Range (μm) : 0 - 100 (mils) : 0 - 4 Graduation (μm) : 10 (mils) : 0.5 Hegman(NS or H) 8 - 0 Paint Club(PCU) 10 - 0 Packed Dimensions 180 x 40 x 12mm (7.1 x 1.6 x 0.5”) Packed Weight 1.36kg (3lb) Packing List Elcometer 2020 Fineness of Grind Gauge, scraper, plastic case and operating instructions ○ Optional Calibration Certificate available.StandardsElcometer 2020 Fineness of Grind GaugesASTM D 1210, AS/NZS 1580.204.1, DIN 53203, EN 21524, FTMS 141 4411.1, ISO 1524, JIS K 5600-2-5, NF T30-046
Standards in grey have been superseded but are still recognised in some industries
Part NumbersElcometer 2020 Fineness of Grind Gauges-
Elcometer 2020/1 Fineness of Grind Gauge - Metric
- Part Number : K0002020M001
-
Elcometer 2020/1 Fineness of Grind Gauge - Metric
- Part Number : K0002020M001C
-
Elcometer 2020/2 Fineness of Grind Gauge - Metric
- Part Number : K0002020M002
-
Elcometer 2020/2 Fineness of Grind Gauge - Metric
- Part Number : K0002020M002C
-
Elcometer 2020/3 Fineness of Grind Gauge - Metric
- Part Number : K0002020M003
-
Elcometer 2020/3 Fineness of Grind Gauge - Metric
- Part Number : K0002020M003C
-
Elcometer 2020/4 Fineness of Grind Gauge - Metric
- Part Number : K0002020M004
-
Elcometer 2020/4 Fineness of Grind Gauge - Metric
- Part Number : K0002020M004C
-
Elcometer 2020/1 Fineness of Grind Gauge - Imperial
- Part Number : K0US2020M001
-
Elcometer 2020/1 Fineness of Grind Gauge - Imperial
- Part Number : K0US2020M001C
-
Elcometer 2020/2 Fineness of Grind Gauge - Imperial
- Part Number : K0US2020M002
-
Elcometer 2020/2 Fineness of Grind Gauge - Imperial
- Part Number : K0US2020M002C
-
Elcometer 2020/4 Fineness of Grind Gauge - Imperial
- Part Number : K0US2020M004
-
Elcometer 2020/4 Fineness of Grind Gauge - Imperial
- Part Number : K0US2020M004C
Welcome to Elcometer.tv
Your ultimate training channelAccessoriesElcometer 2020 Fineness of Grind Gauges-
Part Number: KT002020N001
-
- Standards
-