Elcometer 4270 Sag Tester

  • Industrial Finishing
4270-intro-1
4270-intro-2

The Elcometer 4270 Sag Tester is used to establish a coating’s resistance to sag due to gravity.

  • Summary
    • Summary

    • Made from stainless steel, the straight scraper has 11 notches of increasing clearance. 

      A contrast chart is immediately placed in a vertical position with the thinnest film at the top.

  • Technical Information
    • Technical Specification
      Elcometer 4270 Sag Tester
       
      Part Number Description Range Notch Depth
      Metric   μm mils μm mils
      K0004270M001 Elcometer 4270/1 Sag Tester* 75 - 300 3 - 12 75, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300 3, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
      K0004270M203 Elcometer 4270/3 Sag Tester* 350 - 1500 14 - 60 350, 400, 450, 500, 620, 750, 875, 1000, 1125, 1250, 1500 14, 16, 18, 20, 25, 30, 35, 40, 45, 50, 60
      K0004270M204 Elcometer 4270/4 Sag Tester* 100 - 600 4 - 24 100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24
      Part Number Metric K0004270M001
      Description Elcometer 4270/1 Sag Tester*
      Range
      μm mils
      75 - 300 3 - 12
      Notch Depth
      μm mils
      75, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300 3, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
      Part Number Metric K0004270M203
      Description Elcometer 4270/3 Sag Tester*
      Range
      μm mils
      350 - 1500 14 - 60
      Notch Depth
      μm mils
      350, 400, 450, 500, 620, 750, 875, 1000, 1125, 1250, 1500 14, 16, 18, 20, 25, 30, 35, 40, 45, 50, 60
      Part Number Metric K0004270M204
      Description Elcometer 4270/4 Sag Tester*
      Range
      μm mils
      100 - 600 4 - 24
      Notch Depth
      μm mils
      100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24
      * Elcometer 4270 total width: 127mm (5”)
  • Standards
    • Standards
      Elcometer 4270 Sag Tester

      ASTM D 4400, FTMS 141 4494.1

      Standards in grey have been superseded but are still recognised in some industries.

  • Downloads
    • Downloads
      • Elcometer 4270 Sag Tester Instruction Manual

      • Elcometer 4270 Sag Tester Datasheet

  • Part Numbers
    • Part Numbers
      Elcometer 4270 Sag Tester
      • Elcometer 4270/1 Sag Tester

        The Elcometer 4270/1 Sag Tester has a range of 75 - 300μm (3 - 12mils).

        • Part Number : K0004270M001
        • Certification : No Certificate
        • Part Number : K0004270M001C
        • Certification : Calibration Certificate
      • Elcometer 4270/3 Sag Tester

        The Elcometer 4270/3 Sag Tester has a range of 350 - 1500μm (14 - 60mils).

        • Part Number : K0004270M203
        • Certification : No Certificate
        • Part Number : K0004270M203C
        • Certification : Calibration Certificate
      • Elcometer 4270/4 Sag Tester

        The Elcometer 4270/4 Sag Tester has a range of 100 - 600μm (4 - 24mils).

        • Part Number : K0004270M204
        • Certification : No Certificate
        • Part Number : K0004270M204C
        • Certification : Calibration Certificate

Elcometer 4270 Sag Tester

  • Industrial Finishing
4270-intro-1
4270-intro-2

The Elcometer 4270 Sag Tester is used to establish a coating’s resistance to sag due to gravity.

Summary

Elcometer 4270 Sag Tester

Made from stainless steel, the straight scraper has 11 notches of increasing clearance. 

A contrast chart is immediately placed in a vertical position with the thinnest film at the top.

Downloads
  • Elcometer 4270 Sag Tester Instruction Manual

  • Elcometer 4270 Sag Tester Datasheet

Technical Specification
Elcometer 4270 Sag Tester
 
Part Number Description Range Notch Depth
Metric   μm mils μm mils
K0004270M001 Elcometer 4270/1 Sag Tester* 75 - 300 3 - 12 75, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300 3, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
K0004270M203 Elcometer 4270/3 Sag Tester* 350 - 1500 14 - 60 350, 400, 450, 500, 620, 750, 875, 1000, 1125, 1250, 1500 14, 16, 18, 20, 25, 30, 35, 40, 45, 50, 60
K0004270M204 Elcometer 4270/4 Sag Tester* 100 - 600 4 - 24 100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24
Part Number Metric K0004270M001
Description Elcometer 4270/1 Sag Tester*
Range
μm mils
75 - 300 3 - 12
Notch Depth
μm mils
75, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300 3, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
Part Number Metric K0004270M203
Description Elcometer 4270/3 Sag Tester*
Range
μm mils
350 - 1500 14 - 60
Notch Depth
μm mils
350, 400, 450, 500, 620, 750, 875, 1000, 1125, 1250, 1500 14, 16, 18, 20, 25, 30, 35, 40, 45, 50, 60
Part Number Metric K0004270M204
Description Elcometer 4270/4 Sag Tester*
Range
μm mils
100 - 600 4 - 24
Notch Depth
μm mils
100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24
* Elcometer 4270 total width: 127mm (5”)
Standards
Elcometer 4270 Sag Tester

ASTM D 4400, FTMS 141 4494.1

Standards in grey have been superseded but are still recognised in some industries.

Part Numbers
Elcometer 4270 Sag Tester
  • Elcometer 4270/1 Sag Tester

    The Elcometer 4270/1 Sag Tester has a range of 75 - 300μm (3 - 12mils).

    • Part Number : K0004270M001
    • Certification : No Certificate
    • Part Number : K0004270M001C
    • Certification : Calibration Certificate
  • Elcometer 4270/3 Sag Tester

    The Elcometer 4270/3 Sag Tester has a range of 350 - 1500μm (14 - 60mils).

    • Part Number : K0004270M203
    • Certification : No Certificate
    • Part Number : K0004270M203C
    • Certification : Calibration Certificate
  • Elcometer 4270/4 Sag Tester

    The Elcometer 4270/4 Sag Tester has a range of 100 - 600μm (4 - 24mils).

    • Part Number : K0004270M204
    • Certification : No Certificate
    • Part Number : K0004270M204C
    • Certification : Calibration Certificate