Elcometer 1620 Cupping Tester

  • Industrial Finishing
1620-Digital-Cupping-Tester
1620-Digital-Cupping-Tester-Top

This robust and user-friendly Elcometer 1620 Cupping Tester is used for assessing the cupping ability of coatings applied to metal sheets up to 1.2mm (0.05”) thick.

  • Summary
    • Summary

    • The Elcometer 1620 Cupping Tester has a 27mm (1.06”) diameter hardened steel die in a clamping device and a 20mm (0.79”) diameter punch. A hand-rotated crank and reduction drive moves the punch progressively into the sample.

      The Elcometer 1620 Cupping Tester has a digital gauge with an illuminated magnifier to accurately view the resultant damage and provides accurate readings of the cupping depth on an integrated gauge. Direct viewing of the fissures, cracks and tears in the coating of up to 10μm (0.4mil) can be viewed through the supplied x10 illuminated magnifying glass.

  • Technical Information
    • Technical Specification
      Elcometer 1620 Cupping Tester
      Part Number Description Gauge Type Certificate
      K0001620M004 Elcometer 1620 Cupping Tester Digital (mm, mils)
      Optional Calibration Certificate available
      Dimensions 300 x 240 x 500mm (12 x 10 x 20”)
      Weight 24kg (53lb)
      Packing List Elcometer 1620 Cupping Tester, gauge, gauge holder, zero setting sheet, illuminated 10x magnifying glass with magnet and operating instructions.
      Part Number Description Certificate
      K0001620M004 Elcometer 1620 Cupping Tester
      Optional Calibration Certificate available
      Gauge Type Digital (mm, mils)
      Dimensions 300 x 240 x 500mm (12 x 10 x 20”)
      Weight 24kg (53lb)
      Packing List Elcometer 1620 Cupping Tester, gauge, gauge holder, zero setting sheet, illuminated 10x magnifying glass with magnet and operating instructions.
      Optional calibration Certificate available.
  • Standards
    • Standards
      Elcometer 1620 Cupping Tester

      BS 3900 E4, DIN 53156, DIN 53232, ECCA T6, EN 13523-6, ISO 1520, JIS K 5600-5-2, NBN T22-104, NF T30-019

      Standards in grey have been superseded but are still recognised in some industries.

  • Downloads
    • Downloads
      • Elcometer 1620 Cupping Tester Instruction Manual

      • Elcometer 1620 Cupping Tester Datasheet

  • Part Numbers
    • Part Numbers
      Elcometer 1620 Cupping Tester
      • Elcometer 1620 Cupping Tester

        This robust and user-friendly Elcometer 1620 Cupping Tester is used for assessing the cupping ability of coatings applied to metal sheets up to 1.2mm (0.05”) thick.

        • Part Number : K0001620M004
        • Certification : No Certificate
        • Part Number : K0001620M004C
        • Certification : Calibration Certificate

Elcometer 1620 Cupping Tester

  • Industrial Finishing
1620-Digital-Cupping-Tester
1620-Digital-Cupping-Tester-Top

This robust and user-friendly Elcometer 1620 Cupping Tester is used for assessing the cupping ability of coatings applied to metal sheets up to 1.2mm (0.05”) thick.

Summary

Elcometer 1620 Cupping Tester

The Elcometer 1620 Cupping Tester has a 27mm (1.06”) diameter hardened steel die in a clamping device and a 20mm (0.79”) diameter punch. A hand-rotated crank and reduction drive moves the punch progressively into the sample.

The Elcometer 1620 Cupping Tester has a digital gauge with an illuminated magnifier to accurately view the resultant damage and provides accurate readings of the cupping depth on an integrated gauge. Direct viewing of the fissures, cracks and tears in the coating of up to 10μm (0.4mil) can be viewed through the supplied x10 illuminated magnifying glass.

Downloads
  • Elcometer 1620 Cupping Tester Instruction Manual

  • Elcometer 1620 Cupping Tester Datasheet

Technical Specification
Elcometer 1620 Cupping Tester
Part Number Description Gauge Type Certificate
K0001620M004 Elcometer 1620 Cupping Tester Digital (mm, mils)
Optional Calibration Certificate available
Dimensions 300 x 240 x 500mm (12 x 10 x 20”)
Weight 24kg (53lb)
Packing List Elcometer 1620 Cupping Tester, gauge, gauge holder, zero setting sheet, illuminated 10x magnifying glass with magnet and operating instructions.
Part Number Description Certificate
K0001620M004 Elcometer 1620 Cupping Tester
Optional Calibration Certificate available
Gauge Type Digital (mm, mils)
Dimensions 300 x 240 x 500mm (12 x 10 x 20”)
Weight 24kg (53lb)
Packing List Elcometer 1620 Cupping Tester, gauge, gauge holder, zero setting sheet, illuminated 10x magnifying glass with magnet and operating instructions.
Optional calibration Certificate available.
Standards
Elcometer 1620 Cupping Tester

BS 3900 E4, DIN 53156, DIN 53232, ECCA T6, EN 13523-6, ISO 1520, JIS K 5600-5-2, NBN T22-104, NF T30-019

Standards in grey have been superseded but are still recognised in some industries.

Part Numbers
Elcometer 1620 Cupping Tester
  • Elcometer 1620 Cupping Tester

    This robust and user-friendly Elcometer 1620 Cupping Tester is used for assessing the cupping ability of coatings applied to metal sheets up to 1.2mm (0.05”) thick.

    • Part Number : K0001620M004
    • Certification : No Certificate
    • Part Number : K0001620M004C
    • Certification : Calibration Certificate