Elcometer 1506 Cylindrical Mandrel Bend Tester

  • Industrial Finishing
1506-Cylindrical-Mandrel-Bend-Tester
1506-Cylindrical-Mandrel-Bend-Tester-in-use

The Elcometer 1506 Cylindrical Mandrel Bend Tester is robust and used to determine the elasticity, adhesion and elongation properties of cured coatings on sheet metal.

  • Summary
    • Summary

    • The frame has a bending lever with height-adjustable rollers and a sliding vice for clamping the sample which means the test pieces are bent perfectly and regularly on decreasing mandrels until the desired effect can be observed.

      The instrument can be adjusted to the diameter of the mandrel used and the mandrels are easily changed.

      A wide range of mandrels with metric and imperial diameters is available. Mandrels are not supplied with the instrument and can be ordered as a set or individually.

  • Key Features
    • Key Features

      Elcometer 1506 Cylindrical Mandrel Bend Tester

      How to use a Cylindrical Mandrel Bend Tester

      Insert large diameter mandrel followed by the coated test panel, making sure that the painted area faces away from the mandrel.

      Tighten the vice by rotating the vice handle.

      With a smooth action pull the lever around the mandrel. Check coating for damage.

      Repeat as necessary with smaller diameter mandrels.

  • Technical Information
    • Technical Specification
      Elcometer 1506 Cylindrical Mandrel Bend Tester
      Part Number Description
      K1506M201 Elcometer 1506 Cylindrical Mandrel Bend Tester
      Test Piece Width Maximum: 64mm (2.5”)
      Test Piece Length Maximum: 80 to 100mm (3.15 to 3.93”) depending on the size of the mandrel used
      Dimensions 320 x 135 x 130mm (12.6 x 5.3 x 5.1”)
      Weight 4.3kg (9.5lb)
      Packing List Elcometer 1506 Cylindrical Mandrel Bend Tester and operating instructions
  • Standards
    • Standards
      Elcometer 1506 Cylindrical Mandrel Bend Tester

      AS/NZS 1580.402.1, ASTM D 2485, ASTM D 522-B, ASTM D 1737, ISO 1519-2, JIS K 5600-5-1

      Standards in grey have been superseded but are still recognised in some industries


  • Downloads
    • Downloads
      • Elcometer 1506 Cylindrical Mandrel Bend Tester Instruction Manual

      • Elcometer 1506 Cylindrical Mandrel Bend Tester Datasheet

  • Part Numbers
    • Part Numbers
      Elcometer 1506 Cylindrical Mandrel Bend Tester
      • Elcometer 1506 Cylindrical Mandrel Bend Tester

        The Elcometer 1506 Cylindrical Mandrel Bend Tester is robust and used to determine the elasticity, adhesion and elongation properties of cured coatings on sheet metal.

        • Part Number : K1506M201
        • Certification : No Certificate
  • Accessories
    • Accessories
      Elcometer 1506 Cylindrical Mandrel Bend Tester
      • Part NumberKT001506P201
      • Part NumberKTUS1506P201
      • Part NumberKT001506F002
      • Part NumberKT001506F003
      • Part NumberKT001506F004
      • Part NumberKT001506F005
      • Part NumberKT001506F006
      • Part NumberKT001506F007
      • Part NumberKT001506F014
      • Part NumberKT001506F015
      • Part NumberKT001506F016
      • Part NumberKT001506F017
      • Part NumberKT001506F0018
      • Part NumberKT001506F019
      • Part NumberKT001506F020
      • Part NumberKT001506F021
      • Part NumberKTUS1506F022
      • Part NumberKTUS1506F023
      • Part NumberKTUS1506F024
      • Part NumberKTUS1506F025
      • Part NumberKTUS1506F026
      • Part NumberKTUS1506F027
      • Part NumberKTUS1506F028

Elcometer 1506 Cylindrical Mandrel Bend Tester

  • Industrial Finishing
1506-Cylindrical-Mandrel-Bend-Tester
1506-Cylindrical-Mandrel-Bend-Tester-in-use

The Elcometer 1506 Cylindrical Mandrel Bend Tester is robust and used to determine the elasticity, adhesion and elongation properties of cured coatings on sheet metal.

Summary

Elcometer 1506 Cylindrical Mandrel Bend Tester

The frame has a bending lever with height-adjustable rollers and a sliding vice for clamping the sample which means the test pieces are bent perfectly and regularly on decreasing mandrels until the desired effect can be observed.

The instrument can be adjusted to the diameter of the mandrel used and the mandrels are easily changed.

A wide range of mandrels with metric and imperial diameters is available. Mandrels are not supplied with the instrument and can be ordered as a set or individually.

Downloads
  • Elcometer 1506 Cylindrical Mandrel Bend Tester Instruction Manual

  • Elcometer 1506 Cylindrical Mandrel Bend Tester Datasheet

Key Features

Elcometer 1506 Cylindrical Mandrel Bend Tester

How to use a Cylindrical Mandrel Bend Tester

Insert large diameter mandrel followed by the coated test panel, making sure that the painted area faces away from the mandrel.

Tighten the vice by rotating the vice handle.

With a smooth action pull the lever around the mandrel. Check coating for damage.

Repeat as necessary with smaller diameter mandrels.

Technical Specification
Elcometer 1506 Cylindrical Mandrel Bend Tester
Part Number Description
K1506M201 Elcometer 1506 Cylindrical Mandrel Bend Tester
Test Piece Width Maximum: 64mm (2.5”)
Test Piece Length Maximum: 80 to 100mm (3.15 to 3.93”) depending on the size of the mandrel used
Dimensions 320 x 135 x 130mm (12.6 x 5.3 x 5.1”)
Weight 4.3kg (9.5lb)
Packing List Elcometer 1506 Cylindrical Mandrel Bend Tester and operating instructions
Standards
Elcometer 1506 Cylindrical Mandrel Bend Tester

AS/NZS 1580.402.1, ASTM D 2485, ASTM D 522-B, ASTM D 1737, ISO 1519-2, JIS K 5600-5-1

Standards in grey have been superseded but are still recognised in some industries


Part Numbers
Elcometer 1506 Cylindrical Mandrel Bend Tester
  • Elcometer 1506 Cylindrical Mandrel Bend Tester

    The Elcometer 1506 Cylindrical Mandrel Bend Tester is robust and used to determine the elasticity, adhesion and elongation properties of cured coatings on sheet metal.

    • Part Number : K1506M201
    • Certification : No Certificate
   
Accessories
Elcometer 1506 Cylindrical Mandrel Bend Tester
  • Part Number: KT001506P201
  • Part Number: KTUS1506P201
  • Part Number: KT001506F002
  • Part Number: KT001506F003
  • Part Number: KT001506F004
  • Part Number: KT001506F005
  • Part Number: KT001506F006
  • Part Number: KT001506F007
  • Part Number: KT001506F014
  • Part Number: KT001506F015
  • Part Number: KT001506F016
  • Part Number: KT001506F017
  • Part Number: KT001506F0018
  • Part Number: KT001506F019
  • Part Number: KT001506F020
  • Part Number: KT001506F021
  • Part Number: KTUS1506F022
  • Part Number: KTUS1506F023
  • Part Number: KTUS1506F024
  • Part Number: KTUS1506F025
  • Part Number: KTUS1506F026
  • Part Number: KTUS1506F027
  • Part Number: KTUS1506F028