Elcometer 355 Precision Coating Thickness Gauge Probe Range

Industrial Finishing

Unique probe modules allow the Elcometer 355 Coating Thickness Gauge to be versatile and flexible for any coating thickness measurement application.

Summary
- Summary
- Probe modules can be freely interchanged as required for both ferrous (F) and non-ferrous (N) metal substrates.
  Most coating thickness gauge probes are capable of an accuracy of ±1% of the reading on a variety of coatings and surfaces.
  Telescopic probes extend from 410mm (16”) to 1100mm (43”).

Technical Information

Technical Specification

Elcometer 355 Precision Coating Thickness Gauge Probe Range

Scale 1
Range	0-1,500μm
Accuracy	±1% or ±1μm (±0.04mil)*
Resolution	0.1μm: 0-200μm; 0.5μm: 200-500μm; 1μm: 500-1,500μm (0.005mil: 0-8mils; 0.02mil: 8-20mils; 0.05mil: 20-60mils)
Probe Design	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Certificate
F1 Standard	T35511952	85mm (3.35”)	6mm (0.24")
F1 Telescopic	T35511959	30mm (1.18”)	6mm (0.24")
N1 Standard	T35511982	85mm (3.35”)	8mm (0.31”)

Scale 2
Range	0-5mm (0-200mils)
Accuracy	±1% or ±5μm (±0.2mil)*
Resolution	2μm: 0-500μm (0.1mil: 0-20mils), 5μm: 500-5,000μm (0.2mil: 20-200mils)
Probe Design	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Certificate
F2 Telescopic	T35511960	36mm (1.42”)	8mm (0.32”), 10mm (0.39”)10mm (0.39”)
N2 Standard	T35511984	88mm (3.46”)	18mm (0.71”)

Scale 4
Range	0-250μm (0-10mils)
Accuracy	±1% or ±1μm (±0.04mil)*
Resolution	0.1μm: 0-250μm (0.005mil: 0-10mils)
Probe Design	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Certificate
F4 Standard	T35511950	85mm (3.35”)	4mm (0.16”)
F4 Right Angle (long)	T35511951	18mm (0.71”)	3mm (0.12”)
N4 Standard	T35511980	90mm (3.54”)	8mm (0.32”)

Scale 5
Range	0-800µm (0-32mils)
Accuracy	±1% or ±2μm (±0.08mil)*
Resolution	1µm: 0-800µm (0.1mil: 0-32mils)
Probe Design	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Certificate
F5 (Rebar)	T35511962	85mm (3.35”)	4mm (0.16”)

Scale 1
Range	0-1,500μm
Accuracy	±1% or ±1μm (±0.04mil)*
Resolution	0.1μm: 0-200μm; 0.5μm: 200-500μm; 1μm: 500-1,500μm (0.005mil: 0-8mils; 0.02mil: 8-20mils; 0.05mil: 20-60mils)
Part Number	Certificate
T35511952
Probe Design	F1 Standard
Minimum Headroom	85mm (3.35”)
Minimum Sample Diameter^b	6mm (0.24")
T35511959
Probe Design	F1 Telescopic
Minimum Headroom	30mm (1.18”)
Minimum Sample Diameter^b	6mm (0.24")
T35511982
Probe Design	N1 Standard
Minimum Headroom	85mm (3.35”)
Minimum Sample Diameter^b	8mm (0.31”)

Scale 2
Range	0-5mm (0-200mils)
Accuracy	±1% or ±5μm (±0.2mil)*
Resolution	2μm: 0-500μm (0.1mil: 0-20mils), 5μm: 500-5,000μm (0.2mil: 20-200mils)
Part Number	Certificate
T35511960
Probe Design	F2 Telescopic
Minimum Headroom	36mm (1.42”)
Minimum Sample Diameter^b	8mm (0.32”), 10mm (0.39”)10mm (0.39”)
T35511984
Probe Design	N2 Standard
Minimum Headroom	88mm (3.46”)
Minimum Sample Diameter^b	18mm (0.71”)
Range	0-5mm (0-200mils)
Accuracy	±1% or ±5μm (±0.2mil)*
Resolution	2μm: 0-500μm (0.1mil: 0-20mils), 5μm: 500-5,000μm (0.2mil: 20-200mils)

Scale 4
Range	0-250μm (0-10mils)
Accuracy	±1% or ±1μm (±0.04mil)*
Resolution	0.1μm: 0-250μm (0.005mil: 0-10mils)
Part Number	Certificate
T35511950
Probe Design	F4 Standard
Minimum Headroom	85mm (3.35”)
Minimum Sample Diameter^b	4mm (0.16”)
T35511951
Probe Design	F4 Right Angle (long)
Minimum Headroom	18mm (0.71”)
Minimum Sample Diameter^b	3mm (0.12”)
T35511980
Probe Design	N4 Standard
Minimum Headroom	90mm (3.54”)
Minimum Sample Diameter^b	8mm (0.32”)

Scale 5
Range	0-800µm (0-32mils)
Accuracy	±1% or ±2μm (±0.08mil)*
Resolution	1µm: 0-800µm (0.1mil: 0-32mils)
Part Number	Certificate
T35511962
Probe Design	F5 (Rebar)
Minimum Headroom	85mm (3.35”)
Minimum Sample Diameter^b	4mm (0.16”)

* Whichever is greater
● Test Certificate supplied as standard.

Downloads
- Downloads
  Elcometer 355 Coating Thickness Gauge Instruction Manual
  
  Elcometer 355 Coating Thickness Gauge Datasheet
Part Numbers
- Part Numbers
  
  Elcometer 355 Precision Coating Thickness Gauge Probe Range
  Range
  
  Accuracy
  
  Minimum Headroom
  No data found!!
  - Elcometer 355 Precision Coating Thickness Gauge F1 Standard - Scale 1
    
    Range: 0-1,500μm
    
    Accuracy: ±1% or ±1μm (±0.04mil)*
    
    Minimum Headroom: 85mm (3.35”)
    
    Part Number : T35511952
  - Elcometer 355 Precision Coating Thickness Gauge F1 Telescopic - Scale 1
    
    Range: 0-1,500μm
    
    Accuracy: ±1% or ±1μm (±0.04mil)*
    
    Minimum Headroom: 30mm (1.18”)
    
    Part Number : T35511959
  - Elcometer 355 Precision Coating Thickness Gauge N1 Standard - Scale 1
    
    Range: 0-1,500μm
    
    Accuracy: ±1% or ±1μm (±0.04mil)*
    
    Minimum Headroom: 85mm (3.35”)
    
    Part Number : T35511982
  - Elcometer 355 Precision Coating Thickness Gauge F2 Telescopic - Scale 2
    
    Range: 0-5mm (0-200mils)
    
    Accuracy: ±1% or ±5μm (±0.2mil)*
    
    Minimum Headroom: 36mm (1.42”)
    
    Part Number : T35511960
  - Elcometer 355 Precision Coating Thickness Gauge N2 Standard - Scale 2
    
    Range: 0-5mm (0-200mils)
    
    Accuracy: ±1% or ±5μm (±0.2mil)*
    
    Minimum Headroom: 88mm (3.46”)
    
    Part Number : T35511984
  - Elcometer 355 Precision Coating Thickness Gauge F4 Standard - Scale 4
    
    Range: 0-250μm (0-10mils)
    
    Accuracy: ±1% or ±1μm (±0.04mil)*
    
    Minimum Headroom: 85mm (3.35”)
    
    Part Number : T35511950
  - Elcometer 355 Precision Coating Thickness Gauge F4 Right Angle (long) - Scale 4
    
    Range: 0-250μm (0-10mils)
    
    Accuracy: ±1% or ±1μm (±0.04mil)*
    
    Minimum Headroom: 18mm (0.71”)
    
    Part Number : T35511951
  - Elcometer 355 Precision Coating Thickness Gauge N4 Standard - Scale 4
    
    Range: 0-250μm (0-10mils)
    
    Accuracy: ±1% or ±1μm (±0.04mil)*
    
    Minimum Headroom: 90mm (3.54”)
    
    Part Number : T35511980
Accessories
- Accessories
  
  Elcometer 355 Precision Coating Thickness Gauge Probe Range
  - Probe Placement JIG
    
    Part Number: T95012880
  - Component Hand Vice
    
    Part Number: T95013028
  - Cable Release Assembly - ideal for remote measurements
    
    Part Number: T95012888
  - Jumbo Hand Grip F and N Probes
    
    Part Number: T9997766-
  - V-Probe Adaptor F and N Probes
    
    Part Number: T9997381-
  - N4 Probe Adaptor - must be purchased for use with N4 Probes
    
    Part Number: T95015589

Home
Coatings Inspection
Coatings Inspection Division
Dry Film Thickness
Digital Coating Thickness Gauges
Elcometer 355 Precision Coating Thickness Gauge Probe Range

Elcometer 355 Precision Coating Thickness Gauge Probe Range

Industrial Finishing

Unique probe modules allow the Elcometer 355 Coating Thickness Gauge to be versatile and flexible for any coating thickness measurement application.

Summary

Elcometer 355 Precision Coating Thickness Gauge Probe Range

Probe modules can be freely interchanged as required for both ferrous (F) and non-ferrous (N) metal substrates.

Most coating thickness gauge probes are capable of an accuracy of ±1% of the reading on a variety of coatings and surfaces.

Telescopic probes extend from 410mm (16”) to 1100mm (43”).

Downloads

Elcometer 355 Coating Thickness Gauge Instruction Manual
Elcometer 355 Coating Thickness Gauge Datasheet

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Technical Specification

Elcometer 355 Precision Coating Thickness Gauge Probe Range

Scale 1
Range	0-1,500μm
Accuracy	±1% or ±1μm (±0.04mil)*
Resolution	0.1μm: 0-200μm; 0.5μm: 200-500μm; 1μm: 500-1,500μm (0.005mil: 0-8mils; 0.02mil: 8-20mils; 0.05mil: 20-60mils)
Probe Design	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Certificate
F1 Standard	T35511952	85mm (3.35”)	6mm (0.24")
F1 Telescopic	T35511959	30mm (1.18”)	6mm (0.24")
N1 Standard	T35511982	85mm (3.35”)	8mm (0.31”)

Scale 2
Range	0-5mm (0-200mils)
Accuracy	±1% or ±5μm (±0.2mil)*
Resolution	2μm: 0-500μm (0.1mil: 0-20mils), 5μm: 500-5,000μm (0.2mil: 20-200mils)
Probe Design	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Certificate
F2 Telescopic	T35511960	36mm (1.42”)	8mm (0.32”), 10mm (0.39”)10mm (0.39”)
N2 Standard	T35511984	88mm (3.46”)	18mm (0.71”)

Scale 4
Range	0-250μm (0-10mils)
Accuracy	±1% or ±1μm (±0.04mil)*
Resolution	0.1μm: 0-250μm (0.005mil: 0-10mils)
Probe Design	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Certificate
F4 Standard	T35511950	85mm (3.35”)	4mm (0.16”)
F4 Right Angle (long)	T35511951	18mm (0.71”)	3mm (0.12”)
N4 Standard	T35511980	90mm (3.54”)	8mm (0.32”)

Scale 5
Range	0-800µm (0-32mils)
Accuracy	±1% or ±2μm (±0.08mil)*
Resolution	1µm: 0-800µm (0.1mil: 0-32mils)
Probe Design	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Certificate
F5 (Rebar)	T35511962	85mm (3.35”)	4mm (0.16”)

Scale 1
Range	0-1,500μm
Accuracy	±1% or ±1μm (±0.04mil)*
Resolution	0.1μm: 0-200μm; 0.5μm: 200-500μm; 1μm: 500-1,500μm (0.005mil: 0-8mils; 0.02mil: 8-20mils; 0.05mil: 20-60mils)
Part Number	Certificate
T35511952
Probe Design	F1 Standard
Minimum Headroom	85mm (3.35”)
Minimum Sample Diameter^b	6mm (0.24")
T35511959
Probe Design	F1 Telescopic
Minimum Headroom	30mm (1.18”)
Minimum Sample Diameter^b	6mm (0.24")
T35511982
Probe Design	N1 Standard
Minimum Headroom	85mm (3.35”)
Minimum Sample Diameter^b	8mm (0.31”)

Scale 2
Range	0-5mm (0-200mils)
Accuracy	±1% or ±5μm (±0.2mil)*
Resolution	2μm: 0-500μm (0.1mil: 0-20mils), 5μm: 500-5,000μm (0.2mil: 20-200mils)
Part Number	Certificate
T35511960
Probe Design	F2 Telescopic
Minimum Headroom	36mm (1.42”)
Minimum Sample Diameter^b	8mm (0.32”), 10mm (0.39”)10mm (0.39”)
T35511984
Probe Design	N2 Standard
Minimum Headroom	88mm (3.46”)
Minimum Sample Diameter^b	18mm (0.71”)
Range	0-5mm (0-200mils)
Accuracy	±1% or ±5μm (±0.2mil)*
Resolution	2μm: 0-500μm (0.1mil: 0-20mils), 5μm: 500-5,000μm (0.2mil: 20-200mils)

Scale 4
Range	0-250μm (0-10mils)
Accuracy	±1% or ±1μm (±0.04mil)*
Resolution	0.1μm: 0-250μm (0.005mil: 0-10mils)
Part Number	Certificate
T35511950
Probe Design	F4 Standard
Minimum Headroom	85mm (3.35”)
Minimum Sample Diameter^b	4mm (0.16”)
T35511951
Probe Design	F4 Right Angle (long)
Minimum Headroom	18mm (0.71”)
Minimum Sample Diameter^b	3mm (0.12”)
T35511980
Probe Design	N4 Standard
Minimum Headroom	90mm (3.54”)
Minimum Sample Diameter^b	8mm (0.32”)

Scale 5
Range	0-800µm (0-32mils)
Accuracy	±1% or ±2μm (±0.08mil)*
Resolution	1µm: 0-800µm (0.1mil: 0-32mils)
Part Number	Certificate
T35511962
Probe Design	F5 (Rebar)
Minimum Headroom	85mm (3.35”)
Minimum Sample Diameter^b	4mm (0.16”)

* Whichever is greater
● Test Certificate supplied as standard.

Part Numbers

Elcometer 355 Precision Coating Thickness Gauge Probe Range

Range
Accuracy
Minimum Headroom

Elcometer 355 Precision Coating Thickness Gauge F1 Standard - Scale 1
- Range: 0-1,500μm
- Accuracy: ±1% or ±1μm (±0.04mil)*
- Minimum Headroom: 85mm (3.35”)
- Part Number : T35511952
Elcometer 355 Precision Coating Thickness Gauge F1 Telescopic - Scale 1
- Range: 0-1,500μm
- Accuracy: ±1% or ±1μm (±0.04mil)*
- Minimum Headroom: 30mm (1.18”)
- Part Number : T35511959
Elcometer 355 Precision Coating Thickness Gauge N1 Standard - Scale 1
- Range: 0-1,500μm
- Accuracy: ±1% or ±1μm (±0.04mil)*
- Minimum Headroom: 85mm (3.35”)
- Part Number : T35511982
Elcometer 355 Precision Coating Thickness Gauge F2 Telescopic - Scale 2
- Range: 0-5mm (0-200mils)
- Accuracy: ±1% or ±5μm (±0.2mil)*
- Minimum Headroom: 36mm (1.42”)
- Part Number : T35511960
Elcometer 355 Precision Coating Thickness Gauge N2 Standard - Scale 2
- Range: 0-5mm (0-200mils)
- Accuracy: ±1% or ±5μm (±0.2mil)*
- Minimum Headroom: 88mm (3.46”)
- Part Number : T35511984
Elcometer 355 Precision Coating Thickness Gauge F4 Standard - Scale 4
- Range: 0-250μm (0-10mils)
- Accuracy: ±1% or ±1μm (±0.04mil)*
- Minimum Headroom: 85mm (3.35”)
- Part Number : T35511950
Elcometer 355 Precision Coating Thickness Gauge F4 Right Angle (long) - Scale 4
- Range: 0-250μm (0-10mils)
- Accuracy: ±1% or ±1μm (±0.04mil)*
- Minimum Headroom: 18mm (0.71”)
- Part Number : T35511951
Elcometer 355 Precision Coating Thickness Gauge N4 Standard - Scale 4
- Range: 0-250μm (0-10mils)
- Accuracy: ±1% or ±1μm (±0.04mil)*
- Minimum Headroom: 90mm (3.54”)
- Part Number : T35511980

Accessories

Elcometer 355 Precision Coating Thickness Gauge Probe Range

Probe Placement JIG

Part Number: T95012880
Component Hand Vice

Part Number: T95013028
Cable Release Assembly - ideal for remote measurements

Part Number: T95012888
Jumbo Hand Grip F and N Probes

Part Number: T9997766-
V-Probe Adaptor F and N Probes

Part Number: T9997381-
N4 Probe Adaptor - must be purchased for use with N4 Probes

Part Number: T95015589

Coatings Inspection

Physical Test Equipment

ElcoPatch™
Holiday Repair Kit

NEW ElcoMaster^® Software

Coatings Inspection

Physical Test Equipment

ElcoPatch™
Holiday Repair Kit

NEW ElcoMaster^® Software

Elcometer 355 Precision Coating Thickness Gauge Probe Range

Unique probe modules allow the Elcometer 355 Coating Thickness Gauge to be versatile and flexible for any coating thickness measurement application.

Summary

Elcometer 355 Precision Coating Thickness Gauge Probe Range

Unique probe modules allow the Elcometer 355 Coating Thickness Gauge to be versatile and flexible for any coating thickness measurement application.

Summary

Elcometer 355 Precision Coating Thickness Gauge Probe Range