Elcometer 508 Push Off Adhesion Tester

  • Protective Coatings
  • Industrial Finishing
508-push-off-adhesion-tester-intro-1
508-push-off-adhesion-kit-intro-2

The Elcometer 508 Push Off Adhesion Tester is an extremely versatile Type III* adhesion gauge which can be used to test adhesion strength of coatings.

  • Summary
    • Summary

    • 508-powerful-updated-short-description

      Powerful

      • Suitable for use on flat, concave & convex surfaces
      • Rugged & lightweight
      • Smooth load application up to 25MPa (3630psi)
      508-accurate-short-description

      Accurate

      • Measurement range up to 25MPa (3630psi)
      • Full scale accuracy of ±1.5%
      • Maximum hold - displays the highest value reached
      508-flexible-short-description

      Flexible

      • Easy to use hand-held design
      • Ideal for field use on tanks & pipelines
      • Reusable stainless steel dollies
      • MPa / psi switchable

      With the Elcometer 508, tests can be made on flat or curved (concave and convex) surfaces.

      • Hand-held, ergonomic and fully portable - ideal for on-site adhesion testing
      • Quick connect coupling for easy connection to the dolly
      • Measurement range up to 25MPa (3630psi) with a full scale accuracy of ±1.5%
      • Rotating crank handle applies smooth loading from 0 up to 25MPa (3630psi)
      • Sealed, heavy duty & impact resistant
      • Dust & waterproof equivalent to IP65
      • Suitable for use in harsh environments

      Standard, convex and concave dollies can be used with the Elcometer 508 adhesion gauge, ideal for testing the adhesion of coatings on flat or curved surfaces such as pipelines and tanks.

      * Type III in accordance with ASTM D 4541

  • Key Features
    • Key Features

      Elcometer 508 Push Off Adhesion Tester

      The rubber protected backlit digital LCD displays the reading in MPa or psi. Maximum hold feature displays the highest value reached.

      Flexible cable design allows the coupling to be positioned easily over the dolly. The pin is pushed through the centre against the substrate providing accurate repeatable results.

      Supplied in a robust plastic carry case, the kit includes the Elcometer 508 and five dollies which can be cleaned with the heated tongs.

  • Technical Information
    • Technical Specification
      Elcometer 508 Push Off Adhesion Tester
      Part Number Description Certificate
      F508-DD Elcometer 508 Digital Push Off Adhesion Tester (UK 240V/ EUR 220V)
      Certificate supplied as standard
      F508-DC Elcometer 508 Digital Push Off Adhesion Tester (US 110V)
      Dolly Size Dolly Size (Outside Diameter) 19.4mm (0.76")
      Dolly Size (Inside Diameter) 3.7mm (0.15")
      Dolly Area 314mm² (0.49sq inch)
      Scale Range 0 - 26MPa (0 - 3800psi)
      Operating Range 2 - 25MPa (300 - 3600psi)
      Scale Resolution 0.01MPa (1psi)
      Accuracy ±1.5% of full scale
      Power Supply 2x AA alkaline dry batteries (rechargeable batteries can be used)
      Weight Gauge: 1.7kg (3.7lb) Kit: 4.5kg (9.9lb)  
      Instrument Length 290mm (11.5”) Coupling Height   200mm (8")
      Packing List Elcometer 508, transit case, 5 flat dollies, 5 dolly plugs, GR415 cyanoacrylate adhesive, dolly cleaning tool, 2 x LR6 (AA batteries), operating instructions and calibration certificate
      Part Number Description Certificate
      F508-DD Elcometer 508 Digital Push Off Adhesion Tester (UK 240V/ EUR 220V)
      Certificate supplied as standard
      F508-DC Elcometer 508 Digital Push Off Adhesion Tester (US 110V)
      Dolly Size (Outside Diameter) 19.4mm (0.76")
      Dolly Size (Inside Diameter) 3.7mm (0.15")
      Dolly Area 314mm² (0.49sq inch)
      Scale Range 0 - 26MPa (0 - 3800psi)
      Operating Range 2 - 25MPa (300 - 3600psi)
      Scale Resolution 0.01MPa (1psi)
      Accuracy ±1.5% of full scale
      Power Supply 2x AA alkaline dry batteries (rechargeable batteries can be used)
      Weight Gauge: 1.7kg (3.7lb), Kit: 4.5kg (9.9lb)
      Instrument Length 290mm (11.5”)
      Coupling Height 200mm (8")
      Packing List Elcometer 508, transit case, 5 flat dollies, 5 dolly plugs, GR415 cyanoacrylate adhesive, dolly cleaning tool, 2 x LR6 (AA batteries), operating instructions and calibration certificate
      Calibration Certificate supplied as standard.
  • Standards
    • Standards
      Elcometer 508 Push Off Adhesion Tester

      ASTM D 4541, ISO 16276-1, NF T30-606

  • Downloads
    • Downloads
        • Elcometer 508 Push Off Adhesion Tester Instruction Manual

        • Elcometer 508 Push Off Adhesion Tester Datasheet

  • Part Numbers
    • Part Numbers
      Elcometer 508 Push Off Adhesion Tester
      • Elcometer 508 Digital Push Off Adhesion Tester (UK 240V / EUR 220V)

        The Elcometer 508 Push Off Adhesion Tester is an extremely versatile Type III* adhesion gauge, which allows tests to be made on flat or curved surfaces.

        • Voltage: UK 240V/EUR 220V
        • Part Number : F508-DD
        • Certification : Calibration Certificate
      • Elcometer 508 Digital Push Off Adhesion Tester (US 110V)

        The Elcometer 508 Push Off Adhesion Tester is an extremely versatile Type III* adhesion gauge, which allows tests to be made on flat or curved surfaces.

        • Voltage: US 110V
        • Part Number : F508-DC
        • Certification : Calibration Certificate
  • Accessories
    • Accessories
      Elcometer 508 Push Off Adhesion Tester
      • Part NumberT99911136
      • Part NumberT9994586-
      • Part NumberT99914009
      • Part NumberT99911135
      • Part NumberT9999646-
      • Part NumberT99923147
      • Part NumberT99923103
      • Part Number-

Elcometer 508 Push Off Adhesion Tester

  • Protective Coatings
  • Industrial Finishing
508-push-off-adhesion-tester-intro-1
508-push-off-adhesion-kit-intro-2

The Elcometer 508 Push Off Adhesion Tester is an extremely versatile Type III* adhesion gauge which can be used to test adhesion strength of coatings.

508-powerful-updated-short-description

Powerful

  • Suitable for use on flat, concave & convex surfaces
  • Rugged & lightweight
  • Smooth load application up to 25MPa (3630psi)
508-accurate-short-description

Accurate

  • Measurement range up to 25MPa (3630psi)
  • Full scale accuracy of ±1.5%
  • Maximum hold - displays the highest value reached
508-flexible-short-description

Flexible

  • Easy to use hand-held design
  • Ideal for field use on tanks & pipelines
  • Reusable stainless steel dollies
  • MPa / psi switchable

Summary

Elcometer 508 Push Off Adhesion Tester

With the Elcometer 508, tests can be made on flat or curved (concave and convex) surfaces.

  • Hand-held, ergonomic and fully portable - ideal for on-site adhesion testing
  • Quick connect coupling for easy connection to the dolly
  • Measurement range up to 25MPa (3630psi) with a full scale accuracy of ±1.5%
  • Rotating crank handle applies smooth loading from 0 up to 25MPa (3630psi)
  • Sealed, heavy duty & impact resistant
  • Dust & waterproof equivalent to IP65
  • Suitable for use in harsh environments

Standard, convex and concave dollies can be used with the Elcometer 508 adhesion gauge, ideal for testing the adhesion of coatings on flat or curved surfaces such as pipelines and tanks.

* Type III in accordance with ASTM D 4541

Downloads
    • Elcometer 508 Push Off Adhesion Tester Instruction Manual

    • Elcometer 508 Push Off Adhesion Tester Datasheet

Key Features

Elcometer 508 Push Off Adhesion Tester

The rubber protected backlit digital LCD displays the reading in MPa or psi. Maximum hold feature displays the highest value reached.

Flexible cable design allows the coupling to be positioned easily over the dolly. The pin is pushed through the centre against the substrate providing accurate repeatable results.

Supplied in a robust plastic carry case, the kit includes the Elcometer 508 and five dollies which can be cleaned with the heated tongs.

Technical Specification
Elcometer 508 Push Off Adhesion Tester
Part Number Description Certificate
F508-DD Elcometer 508 Digital Push Off Adhesion Tester (UK 240V/ EUR 220V)
Certificate supplied as standard
F508-DC Elcometer 508 Digital Push Off Adhesion Tester (US 110V)
Dolly Size Dolly Size (Outside Diameter) 19.4mm (0.76")
Dolly Size (Inside Diameter) 3.7mm (0.15")
Dolly Area 314mm² (0.49sq inch)
Scale Range 0 - 26MPa (0 - 3800psi)
Operating Range 2 - 25MPa (300 - 3600psi)
Scale Resolution 0.01MPa (1psi)
Accuracy ±1.5% of full scale
Power Supply 2x AA alkaline dry batteries (rechargeable batteries can be used)
Weight Gauge: 1.7kg (3.7lb) Kit: 4.5kg (9.9lb)  
Instrument Length 290mm (11.5”) Coupling Height   200mm (8")
Packing List Elcometer 508, transit case, 5 flat dollies, 5 dolly plugs, GR415 cyanoacrylate adhesive, dolly cleaning tool, 2 x LR6 (AA batteries), operating instructions and calibration certificate
Part Number Description Certificate
F508-DD Elcometer 508 Digital Push Off Adhesion Tester (UK 240V/ EUR 220V)
Certificate supplied as standard
F508-DC Elcometer 508 Digital Push Off Adhesion Tester (US 110V)
Dolly Size (Outside Diameter) 19.4mm (0.76")
Dolly Size (Inside Diameter) 3.7mm (0.15")
Dolly Area 314mm² (0.49sq inch)
Scale Range 0 - 26MPa (0 - 3800psi)
Operating Range 2 - 25MPa (300 - 3600psi)
Scale Resolution 0.01MPa (1psi)
Accuracy ±1.5% of full scale
Power Supply 2x AA alkaline dry batteries (rechargeable batteries can be used)
Weight Gauge: 1.7kg (3.7lb), Kit: 4.5kg (9.9lb)
Instrument Length 290mm (11.5”)
Coupling Height 200mm (8")
Packing List Elcometer 508, transit case, 5 flat dollies, 5 dolly plugs, GR415 cyanoacrylate adhesive, dolly cleaning tool, 2 x LR6 (AA batteries), operating instructions and calibration certificate
Calibration Certificate supplied as standard.
Standards
Elcometer 508 Push Off Adhesion Tester

ASTM D 4541, ISO 16276-1, NF T30-606

Part Numbers
Elcometer 508 Push Off Adhesion Tester
  • Elcometer 508 Digital Push Off Adhesion Tester (UK 240V / EUR 220V)

    The Elcometer 508 Push Off Adhesion Tester is an extremely versatile Type III* adhesion gauge, which allows tests to be made on flat or curved surfaces.

    • Voltage: UK 240V/EUR 220V
    • Part Number : F508-DD
    • Certification : Calibration Certificate
  • Elcometer 508 Digital Push Off Adhesion Tester (US 110V)

    The Elcometer 508 Push Off Adhesion Tester is an extremely versatile Type III* adhesion gauge, which allows tests to be made on flat or curved surfaces.

    • Voltage: US 110V
    • Part Number : F508-DC
    • Certification : Calibration Certificate
   
Accessories
Elcometer 508 Push Off Adhesion Tester
  • Part Number: T99911136
  • Part Number: T9994586-
  • Part Number: T99914009
  • Part Number: T99911135
  • Part Number: T9999646-
  • Part Number: T99923147
  • Part Number: T99923103
  • Part Number: -