Elcometer 134A Chloride Ion Test Kit for Abrasives

  • Protective Coatings
134a-Intro-Images

The Elcometer 134A Chloride Ion Test Kit for Abrasives is used to test the recycled abrasives for the presence of chloride salts that may contaminate the cleaned surface.

  • Summary
    • Summary

    • Chlorides deposited on a surface by contaminated abrasives during blasting can cause a coating to fail prematurely.

      Contamination can build up, particularly if the blast media is recycled several times. Using the Elcometer 134A Chloride Ion Test in the field will accurately identify contamination and prevent costly surface-related failures.

  • Technical Information
    • Technical Specification
      Elcometer 134A Chloride Ion Test Kit for Abrasives
      Part Number Description
      E134----2 Elcometer 134A Chloride Ion Test Kit for Abrasives
      Measuring Range 1 - 60μg/cm² (1 - 60ppm)
      Resolution 1μg/cm² (1ppm)
      Sample Time 1.5 minutes (approx)
      Storage Conditions Not exceeding 25°C (77°F)
      Dimensions 185 x 125 x 110mm (7 x 5 x 4.5”)
      Weight 367g (13oz)
      Packing List 4 x test kits, containing: abrasive sample container, mixing container with a pre-measured quantity of solution, titration tube, titration tube snapper, strap and operating instructions.
  • Downloads
    • Downloads
      • Elcometer 134A Chloride Ion Test Kit for Abrasives Instruction Manual

      • Elcometer 134A Chloride Ion Test Kit for Abrasives Datasheet

      • Elcometer 134 CHLOR*EXTRACT Solution Material Safety Data Sheet

  • Part Numbers
    • Part Numbers
      Elcometer 134A Chloride Ion Test Kit for Abrasives
      • Elcometer 134A Chloride Ion Test Kit for Abrasives

        The Elcometer 134A Chloride Ion Test Kit for Abrasives is used to test the recycled abrasives for the presence of chloride salts that may contaminate the cleaned surface.

        • Part Number : E134----2
        • Certification : No Certificate

Elcometer 134A Chloride Ion Test Kit for Abrasives

  • Protective Coatings
134a-Intro-Images

The Elcometer 134A Chloride Ion Test Kit for Abrasives is used to test the recycled abrasives for the presence of chloride salts that may contaminate the cleaned surface.

Summary

Elcometer 134A Chloride Ion Test Kit for Abrasives

Chlorides deposited on a surface by contaminated abrasives during blasting can cause a coating to fail prematurely.

Contamination can build up, particularly if the blast media is recycled several times. Using the Elcometer 134A Chloride Ion Test in the field will accurately identify contamination and prevent costly surface-related failures.

Downloads
  • Elcometer 134A Chloride Ion Test Kit for Abrasives Instruction Manual

  • Elcometer 134A Chloride Ion Test Kit for Abrasives Datasheet

  • Elcometer 134 CHLOR*EXTRACT Solution Material Safety Data Sheet

Technical Specification
Elcometer 134A Chloride Ion Test Kit for Abrasives
Part Number Description
E134----2 Elcometer 134A Chloride Ion Test Kit for Abrasives
Measuring Range 1 - 60μg/cm² (1 - 60ppm)
Resolution 1μg/cm² (1ppm)
Sample Time 1.5 minutes (approx)
Storage Conditions Not exceeding 25°C (77°F)
Dimensions 185 x 125 x 110mm (7 x 5 x 4.5”)
Weight 367g (13oz)
Packing List 4 x test kits, containing: abrasive sample container, mixing container with a pre-measured quantity of solution, titration tube, titration tube snapper, strap and operating instructions.
Part Numbers
Elcometer 134A Chloride Ion Test Kit for Abrasives
  • Elcometer 134A Chloride Ion Test Kit for Abrasives

    The Elcometer 134A Chloride Ion Test Kit for Abrasives is used to test the recycled abrasives for the presence of chloride salts that may contaminate the cleaned surface.

    • Part Number : E134----2
    • Certification : No Certificate