Product Description
Technical Specification
Accessories
Instruction Manual
Data Sheet
Videos
Elcometer 138 Bresle Salt Kit
It is essential that the level of contaminants on a surface is measured prior to application of the coating to ensure the quality of the coating and that its optimum lifetime is achieved.
If the coating is applied to a contaminated surface, which is not properly prepared, it could fail prematurely resulting in costly re-coating and high maintenance costs.
The Elcometer 138 Bresle Kit includes the Elcometer 138 Conductivity Meter. This lightweight, portable conductivity meter accurately measures the salinity of the test samples.
The sensor cartridge can be easily replaced when necessary and displays conductivity in a range of units including: S/cm, S/m, ppm and % salinity.
The Bresle Salt Kit is available in three variants:
Elcometer 138 Bresle Salt Kit with Elcometer 135C Bresle Test Patches- E138-1C
Kit Content:
- Elcometer 135C Bresle Test Patch
- Elcometer 138 Conductivity Meter & Sensor
- Standard Calibration Solution
- Moistening Solution
- Bottle of Pure Distilled Water
- Syringes & Needles
- Plastic Beaker
- CR2032 Lithium Batteries, Transit Case & User Guide
Elcometer 138 Bresle Salt Kit with Elcometer 135B Bresle Test Patches - E138-1
Kit Content:
- Elcometer 135B Bresle Patch
- Elcometer 138 Conductivity Meter & Sensor
- Standard Calibration Solution
- Moistening Solution
- Bottle of Pure Distilled Water
- Syringes & Needles
- Plastic Beaker
- CR2032 Lithium Batteries, Transit Case & User Guide
Elcometer 138B Basic Bresle Salt Kit with Elcometer 135C Bresle Test Patches - E138-EC
Kit Content:
- Elcometer 135C Bresle Test Patch
- Elcometer 138E Conductivity Meter
- Standard Calibration Solution
- Bottle of Pure Distilled Water
- Syringes & Needles
- Plastic Beaker
- Batteries, Transit Case & User Guide
Key features of the Elcometer 135C Bresle Test Patch include:
- Easy to peel off after test, leaving no foam on the substrate
- 19% thicker foam walls than traditional patches - easier to insert a needle
- Sealed compartment with clear flexible membrane for sampling soluble impurities
- Covers on both sides to protect against dust and contaminants
- Supplied with a Certificate of Cleanliness & Test Area
- Available in boxes of 25 & 100
Technical Specification
| Part Number | Description |
| E138-1 | Elcometer 138 Bresle Salt Kit with Elcometer 135B Bresle Patches |
| Measuring Range |
0 mS/cm to 19.9 mS/cm and 0 S/m to 1.99 S/m |
|
Accuracy1 |
2% full scale ±1 digit |
| Dimensions | 346 x 292 x 84mm (13.6 x 11.5 x 3.3") |
| Weight | 1.1kg (2lb 7oz) |
| Packing List |
Box of 25 Elcometer 135B Bresle Patches, Elcometer 138 Conductivity Meter & Sensor, 14ml (0.47fl oz) bottle of standard 1.41 mS/cm calibration solution, 14ml (0.47fl oz) bottle of moistening solution, 250ml (8.5fl oz) bottle of pure distilled water, 3 x 5ml (0.17fl oz) syringes, 3 x blunt needles, 30ml (1fl oz) plastic beaker, 2 x CR2032 batteries, transit case and user guide |
|
| |
| E138-1C |
Elcometer 138 Bresle Salt Kit with Elcometer 135C Bresle Test Patches |
| Certificate2 |
• |
| Measurement Range |
0 mS/cm to 19.9 mS/cm and 0 S/m to 1.99 S/m |
| Accuracy1 |
2% full scale ±1 digit |
| Dimensions |
346 x 292 x 84mm (13.6 x 11.5 x 3.3”) |
| Weight |
1.1kg (2lb 7oz) |
| Packing List |
Box of 25 Elcometer 135C Bresle Test Patches, Elcometer 138 Conductivity Meter & Sensor, 14ml (0.47fl oz) bottle of standard 1.41 mS/cm calibration solution, 14ml (0.47fl oz) bottle of moistening solution, 250ml (8.5fl oz) bottle of pure distilled water, 3 x 5ml (0.17fl oz) syringes, 3 x blunt needles, 30ml (1fl oz) plastic beaker, 2 x CR2032 batteries, transit case and user guide |
|
| |
| E138-EC |
Elcometer 138 Basic Bresle Salt Kit with Elcometer 135C Bresle Test Patches |
| Certificate2 |
• |
| Measurement Range |
0 μS/cm to 200.0 μS/cm, 0 μS/cm to 2000 μS/cm, 0 mS/cm to 20 mS/cm |
| Accuracy3 |
1% full scale |
| Dimensions |
307 x 260 x 74mm (12.1 x 10.2 x 2.9”) |
| Weight |
952g (2lb 1oz) |
| Packing List |
Box of 25 Elcometer 135C Bresle Test Patches, Elcometer 138E Conductivity Meter, 250ml (8.5fl oz) bottle of pure distilled water, 3 x 3ml (0.1fl oz) syringes, 3 x blunt needles, 1 x 20ml (0.74 fl oz) Single Use Pouch Standard 1413 µS/cm (1.413 mS/cm) Calibration Solution, 30ml (1fl oz) plastic beaker, 4 x LR44 batteries, transit case & user guide |
STANDARDS:
AS 3894.6-A, IMO MSC.215 (82), IMO MSC.244 (83), ISO 8502-6, ISO 8502-9, SSPC Guide 15, US Navy NSI 009-32, US Navy PPI 63101-000
• Certificate of Cleanliness & Test Area available to download
1 See Elcometer 138 Conductivity Meter for full specification
2 Elcometer 135C Bresle Test Patches are available with your logo, contact your Elcometer representative for more information.
3 See Elcometer 138E Conductivity Meter for fill specification
Accessories
|
Part Number |
Description |
Certificate1 |
|
E135----B |
Bresle Patches (Box of 25) |
|
|
E135----C25 |
Elcometer 135C Bresle Test Patch (Box of 25) |
• |
|
E135----C100 |
Elcometer 135C Bresle Test Patch (Box of 100) |
• |
|
T13818517 |
3 x 5ml (0.17fl oz) Syringes |
|
|
T13818518 |
3 x Needles |
|
|
T13818519 |
Plastic Beaker 30ml (1fl oz) |
|
|
T13827352-1 |
Standard 447 µS/cm (0.447 mS/cm) Calibration Solution – 4 x 20ml (0.74fl oz) Single Use Pouches |
|
|
T13827352-2 |
Standard 1413 µS/cm (1.413 mS/cm) Calibration Solution – 4 x 20ml (0.74fl oz) Single Use Pouches |
|
|
T13827352-3 |
Standard 15000 µS/cm (15 mS/cm) Calibration Solution – 4 x 20ml (0.74fl oz) Single Use Pouches |
|
|
T13823926 |
Standard 1.41 mS/cm (1410 µS/cm) Calibration Solution – 6 x 14ml (0.47fl oz) Bottles |
|
|
T13824404 |
Standard 12.9 mS/cm (12900 µS/cm) Calibration Solution – 6 x 14ml (0.47fl oz) Bottles |
|
|
T13827259 |
Pure Distilled Water - 250ml (8.5fl oz) Bottle |
|
|
T13823925 |
Elcometer 138 Conductivity Meter |
|
|
T13823928 |
Replacement Sensor for Elcometer 138 Conductivity Meter |
|
|
T13827355 |
Elcometer 138E Conductivity Meter |
|
|
T13827455 |
Replacement Sensor for Elcometer 138E Conductivity Meter |
|
• Certificate of Cleanliness & Test Area available to download
1 Elcometer 135C Bresle Test Patches are available with your logo, contact your Elcometer representative for more information.
Videos
SURFACE CLEANLINESS
How to measure soluble salts on surfaces using the Elcometer Bresle Test Patch
Discover the benefits of the new Elcometer 135C Bresle Test Patch. With 19% thicker foam walls, high quality adhesive and easy to peel off the substrate leaving no foam residue, the new Elcometer 135C Bresle Test Patch is ideal for measuring soluble salts in the field.
Click here to download the video script in English.
RELATED PRODUCTS
PRODUCTS
SERVICE & SUPPORT
CONTACT
© Elcometer Limited