Elcometer 1506-B Cylindrical Mandrel Bend Tester
- Industrial Finishing
The Elcometer 1506-B Cylindrical Mandrel Bend Tester is robust and used to determine the elasticity, adhesion and elongation properties of cured coatings on sheet metal.
- Summary
-
Summary
-
The frame has a bending lever with height-adjustable rollers and a sliding vice for clamping the sample which means the test pieces are bent perfectly and regularly on decreasing mandrels until the desired effect can be observed.
The instrument can be adjusted to the diameter of the mandrel used and the mandrels are easily changed.
A wide range of mandrels with metric and imperial diameters is available. Mandrels are not supplied with the instrument and can be ordered as a set or individually.
Accessories for the original Elcometer 1506 Cylindrical Mandrel Bend Test are still available.
-
- Key Features
-
Key Features
Elcometer 1506-B Cylindrical Mandrel Bend Tester
How to use a Cylindrical Mandrel Bend Tester
Insert large diameter mandrel followed by the coated test panel, making sure that the painted area faces away from the mandrel.
Tighten the vice by rotating the vice handle.
With a smooth action pull the lever around the mandrel. Check coating for damage.
Repeat as necessary with smaller diameter mandrels.
-
- Technical Information
-
Technical SpecificationElcometer 1506-B Cylindrical Mandrel Bend Tester
Part Number Description K1506BM201 Elcometer 1506-B Cylindrical Mandrel Bend Tester Test Piece Width Maximum: 76.2mm (3”) Test Piece Length Maximum: 80 to 100mm (3.15 to 3.93”) depending on the size of the mandrel used Dimensions 320 x 147 x 130mm (12.6 x 5.8 x 5.1”) Weight 4kg (9lb) Packing List Elcometer 1506-B Cylindrical Mandrel Bend Tester and operating instructions
-
- Standards
-
StandardsElcometer 1506-B Cylindrical Mandrel Bend Tester
AS/NZS 1580.402.1, ASTM D 2485, ASTM D 522-B, ASTM D 1737, ISO 1519-2, ISO 2063-2, JIS K 5600-5-1
Standards in grey have been superseded but are still recognised in some industries
-
- Downloads
-
Downloads
- Part Numbers
-
Part NumbersElcometer 1506-B Cylindrical Mandrel Bend TesterNo data found!!
-
Elcometer 1506-B Cylindrical Mandrel Bend Tester
- Part Number : K1506BM201
- Accessories
-
AccessoriesElcometer 1506-B Cylindrical Mandrel Bend Tester
-
Part Number: KTUS1506BF022
-
Part Number: KTUS1506BF023
-
Part Number: KTUS1506BF024
-
Part Number: KTUS1506BF025
-
Part Number: KTUS1506BF026
-
Part Number: KTUS1506BF027
-
Part Number: KT001506BP201
-
Part Number: KTUS1506BP201
-
Part Number: KT001506BF002
-
Part Number: KT001506BF003
-
Part Number: KT001506BF004
-
Part Number: KT001506BF005
-
Part Number: KT001506BF006
-
Part Number: KT001506BF007
-
Part Number: KT001506BF014
-
Part Number: KT001506BF015
-
Part Number: KT001506BF016
-
Part Number: KT001506BF017
-
Part Number: KT001506BF019
-
Part Number: KT001506BF020
-
Part Number: KT001506BF021
-
Part Number: KTUS1506BF028-1
-
Part Number: KT001506BF018
-
-
- Home
- Coatings Inspection
- Coatings Inspection Division
- Elasticity, Bend & Impact Testers
- Elcometer 1506-B Cylindrical Mandrel Bend Tester
Elcometer 1506-B Cylindrical Mandrel Bend Tester
- Industrial Finishing
The Elcometer 1506-B Cylindrical Mandrel Bend Tester is robust and used to determine the elasticity, adhesion and elongation properties of cured coatings on sheet metal.
Summary
Elcometer 1506-B Cylindrical Mandrel Bend Tester
The frame has a bending lever with height-adjustable rollers and a sliding vice for clamping the sample which means the test pieces are bent perfectly and regularly on decreasing mandrels until the desired effect can be observed.
The instrument can be adjusted to the diameter of the mandrel used and the mandrels are easily changed.
A wide range of mandrels with metric and imperial diameters is available. Mandrels are not supplied with the instrument and can be ordered as a set or individually.
Accessories for the original Elcometer 1506 Cylindrical Mandrel Bend Test are still available.
Key Features
Elcometer 1506-B Cylindrical Mandrel Bend Tester
How to use a Cylindrical Mandrel Bend Tester
Insert large diameter mandrel followed by the coated test panel, making sure that the painted area faces away from the mandrel.
Tighten the vice by rotating the vice handle.
With a smooth action pull the lever around the mandrel. Check coating for damage.
Repeat as necessary with smaller diameter mandrels.
Technical SpecificationElcometer 1506-B Cylindrical Mandrel Bend TesterPart Number Description K1506BM201 Elcometer 1506-B Cylindrical Mandrel Bend Tester Test Piece Width Maximum: 76.2mm (3”) Test Piece Length Maximum: 80 to 100mm (3.15 to 3.93”) depending on the size of the mandrel used Dimensions 320 x 147 x 130mm (12.6 x 5.8 x 5.1”) Weight 4kg (9lb) Packing List Elcometer 1506-B Cylindrical Mandrel Bend Tester and operating instructions StandardsElcometer 1506-B Cylindrical Mandrel Bend TesterAS/NZS 1580.402.1, ASTM D 2485, ASTM D 522-B, ASTM D 1737, ISO 1519-2, ISO 2063-2, JIS K 5600-5-1
Standards in grey have been superseded but are still recognised in some industries
Part NumbersElcometer 1506-B Cylindrical Mandrel Bend TesterNo data found!!-
Elcometer 1506-B Cylindrical Mandrel Bend Tester
- Part Number : K1506BM201
AccessoriesElcometer 1506-B Cylindrical Mandrel Bend Tester-
Part Number: KTUS1506BF022
-
Part Number: KTUS1506BF023
-
Part Number: KTUS1506BF024
-
Part Number: KTUS1506BF025
-
Part Number: KTUS1506BF026
-
Part Number: KTUS1506BF027
-
Part Number: KT001506BP201
-
Part Number: KTUS1506BP201
-
Part Number: KT001506BF002
-
Part Number: KT001506BF003
-
Part Number: KT001506BF004
-
Part Number: KT001506BF005
-
Part Number: KT001506BF006
-
Part Number: KT001506BF007
-
Part Number: KT001506BF014
-
Part Number: KT001506BF015
-
Part Number: KT001506BF016
-
Part Number: KT001506BF017
-
Part Number: KT001506BF019
-
Part Number: KT001506BF020
-
Part Number: KT001506BF021
-
Part Number: KTUS1506BF028-1
-
Part Number: KT001506BF018
- Part Numbers
-