Twinline Remote Control Hose
- Industrial Finishing
Durable, reliable and lightweight the Elcometer Twinline Control Hose is constructed using spiral polyester with reinforced rubber.
- Summary
-
Summary
-
Elcometer’s tough ¼” (6mm) ID Twinline Control Hose prevents tangles and trip hazards compared to using single lines with the Blast Hose.
It is available in a range of sizes, from 5 metres (16.4ft) to 20 metres (65.6ft), and supplied with 6mm (¼") female swivel couplings to fit directly to your deadman’s handle and Remote Control Valve outlet.
-
- Technical Information
-
Technical SpecificationTwinline Remote Control Hose
Internal Diameter ID 6mm (1⁄4") Outside Diameter OD 13mm (1⁄2") Construction Linging Back NR+SBTR+EPDM Rubber Reinforcement Spiral Polyester Yarn Working Pressure 20bar (260psi) Burst Pressure 60bar (870psi) Operating Temperature -35°C to +80°C (-31°F to 176°F)
-
- Downloads
-
Downloads
-
Elcometer Twinline Remote Control Hose - Data Sheet
-
Elcometer Twinline Remote Control Hose - Data Sheet ASME
- Part Numbers
-
Part NumbersTwinline Remote Control Hose
-
Twinline Pneumatic Remote Control Hose - 5 metres (16.4ft)- Part Number (BSP Thread): TWINLINE-5B
- Part Number (NPT / NPSM Thread) : TWINLINE-5N
-
Twinline Pneumatic Remote Control Hose - 10 metres (32.8ft)- Part Number (BSP Thread): TWINLINE-10B
- Part Number (NPT / NPSM Thread) : TWINLINE-10N
-
Twinline Pneumatic Remote Control Hose - 20 metres (65.5ft)- Part Number (BSP Thread): TWINLINE-20B
- Part Number (NPT / NPSM Thread) : TWINLINE-20N
-
-
-
Twinline Remote Control Hose
- Industrial Finishing
Durable, reliable and lightweight the Elcometer Twinline Control Hose is constructed using spiral polyester with reinforced rubber.
Summary
Twinline Remote Control Hose
Elcometer’s tough ¼” (6mm) ID Twinline Control Hose prevents tangles and trip hazards compared to using single lines with the Blast Hose.
It is available in a range of sizes, from 5 metres (16.4ft) to 20 metres (65.6ft), and supplied with 6mm (¼") female swivel couplings to fit directly to your deadman’s handle and Remote Control Valve outlet.
-
Elcometer Twinline Remote Control Hose - Data Sheet
-
Elcometer Twinline Remote Control Hose - Data Sheet ASME
| Internal Diameter ID | 6mm (1⁄4") |
| Outside Diameter OD | 13mm (1⁄2") |
| Construction | Linging Back NR+SBTR+EPDM Rubber |
| Reinforcement | Spiral Polyester Yarn |
| Working Pressure | 20bar (260psi) |
| Burst Pressure | 60bar (870psi) |
| Operating Temperature | -35°C to +80°C (-31°F to 176°F) |
-
Twinline Pneumatic Remote Control Hose - 5 metres (16.4ft)
- Part Number (BSP Thread): TWINLINE-5B
- Part Number (NPT / NPSM Thread) : TWINLINE-5N
-
Twinline Pneumatic Remote Control Hose - 10 metres (32.8ft)
- Part Number (BSP Thread): TWINLINE-10B
- Part Number (NPT / NPSM Thread) : TWINLINE-10N
-
Twinline Pneumatic Remote Control Hose - 20 metres (65.5ft)
- Part Number (BSP Thread): TWINLINE-20B
- Part Number (NPT / NPSM Thread) : TWINLINE-20N