Whip Check Safety Cable
Manufactured from high-strength, resistant steel and designed for containing the coupling connection in case of accidental separation, the Elcometer Whip Check Safety Cable creates extra protection for the operator in the event of a coupling failure.
- Summary
-
Summary
-
If couplings fail or disconnect at high pressure, this can result in severe injuries. The high pressure can cause the hose to thrash around uncontrollably, creating danger to the life of the blaster and those nearby.
Using Elcometer Whip Check Safety Cables enables greater control over the situation as the coupling's movement becomes far more restricted, allowing you to shut down the air supply quickly and safely.
To prevent accidents, whip checks should be used at all connection points, including:
- Between two hose couplings
- Between hose & pot couplings
- Between hose & compressor couplings
- Between hose & air distribution manifolds.
-
- Technical Information
-
Technical SpecificationWhip Check Safety Cable
Part Number Part Number For Blast Hose Internal Diameter (ID) For Blast Hose Outside Diameter (OD) Elcometer Blast Hose MT29157 13 - 32mm (½” - 1¼") 28 - 48mm (1⅛” - 1⅞") BH13, BH19, BH25, BH32 & BH32X MT29156 38mm (1½") 56mm (23⁄16")) BH38 & BH38X Part Number Part Number MT29157 For Blast Hose Internal Diameter (ID) 13 - 32mm (½” - 1¼") For Blast Hose Outside Diameter (OD) 28 - 48mm (1⅛” - 1⅞") Elcometer Blast Hose BH13, BH19, BH25, BH32 & BH32X Part Number MT29156 For Blast Hose Internal Diameter (ID) 38mm (1½") For Blast Hose Outside Diameter (OD) 56mm (23⁄16")) Elcometer Blast Hose BH38 & BH38X
-
- Part Numbers
-
Part NumbersWhip Check Safety Cable
-
Whip Check Safety Cable for BH13, BH19, BH25, BH32 & BH32X Blast Hoses- Part Number : MT29157
-
Whip Check Safety Cable for BH38 & BH38X Blast Hose- Part Number : MT29156
-
-
Whip Check Safety Cable
Manufactured from high-strength, resistant steel and designed for containing the coupling connection in case of accidental separation, the Elcometer Whip Check Safety Cable creates extra protection for the operator in the event of a coupling failure.
Summary
Whip Check Safety Cable
If couplings fail or disconnect at high pressure, this can result in severe injuries. The high pressure can cause the hose to thrash around uncontrollably, creating danger to the life of the blaster and those nearby.
Using Elcometer Whip Check Safety Cables enables greater control over the situation as the coupling's movement becomes far more restricted, allowing you to shut down the air supply quickly and safely.
To prevent accidents, whip checks should be used at all connection points, including:
- Between two hose couplings
- Between hose & pot couplings
- Between hose & compressor couplings
- Between hose & air distribution manifolds.
| Part Number | |||
| Part Number | For Blast Hose Internal Diameter (ID) | For Blast Hose Outside Diameter (OD) | Elcometer Blast Hose |
| MT29157 | 13 - 32mm (½” - 1¼") | 28 - 48mm (1⅛” - 1⅞") | BH13, BH19, BH25, BH32 & BH32X |
| MT29156 | 38mm (1½") | 56mm (23⁄16")) | BH38 & BH38X |
| Part Number | |
| Part Number | MT29157 |
| For Blast Hose Internal Diameter (ID) | 13 - 32mm (½” - 1¼") |
| For Blast Hose Outside Diameter (OD) | 28 - 48mm (1⅛” - 1⅞") |
| Elcometer Blast Hose | BH13, BH19, BH25, BH32 & BH32X |
| Part Number | MT29156 |
| For Blast Hose Internal Diameter (ID) | 38mm (1½") |
| For Blast Hose Outside Diameter (OD) | 56mm (23⁄16")) |
| Elcometer Blast Hose | BH38 & BH38X |
-
Whip Check Safety Cable for BH13, BH19, BH25, BH32 & BH32X Blast Hoses
- Part Number : MT29157
-
Whip Check Safety Cable for BH38 & BH38X Blast Hose
- Part Number : MT29156