Elcometer Blast Nozzle Holders
Elcometer Blast Nozzle Holders are available in nylon and aluminium, making them lightweight and durable.
Elcometer Blast Nozzle Holders
Elcometer Blast Nozzle Holders are available in nylon and aluminium, making them lightweight and durable.
Summary
Elcometer Blast Nozzle Holders
Elcometer Blast Nozzle Holders are designed to fit securely on to the Blast Hose. The range is split into two key sections: Aluminium Nozzle Holders and Nylon Nozzle Holders.
The Aluminium Nozzle Holders are supplied with a rubber gasket and screws whereas the Nylon Nozzle Holders are supplied with screws only as Elcometer Blast Nozzles are supplied with a sealing gasket as standard.
Each section of Nozzle Holders are supplied with a choice of three threads. The diagram below helps you to choose the thread you need.
Contractor Thread
Industry standard thread at 4½ threads per inch (TPI) (114mm), this style greatly reduces the chance of cross threading and is much easier to install.
NPSM Thread
The National Standard Free-Fitting Straight Mechanical Pipe Thread (NPSM) is the Industry standard straight thread used widely in North America.
Fine Thread
Fine thread is designed to work with smaller diameter hose and couplings, exclusive to Nozzle Holders designed for the Elcometer 1020 Abrasive Blast Machine and the Tungsten Carbide Straight Nozzle.
Aluminium Blast Nozzle Holders | |||
Part Number | For Blast Hose Internal Diameter (ID) | For Blast Hose Outside Diameter (OD) | Elcometer Blast Hose |
ANH-25* | 25mm (1") | 38mm (1½") | BH25 |
ANH-32* | 32mm (1¼") | 48mm (1⅞") | BH32 & BH32X |
ANH-38* | 38mm (1½") | 55mm (23⁄16")) | BH38 & BH38X |
Nylon Blast Nozzle Holders | |||
NNH-19* | 19mm (¾") | 34mm (1⅜") | BH19 |
NNH-25* | 25mm (1") | 38mm (1½") | BH25 |
NNH-32* | 32mm (1¼") | 48mm (1⅞") | BH32 & BH32X |
NNH-38* | 38mm (1½") | 55mm (23⁄16")) | BH38 & BH38X |
Blast Nozzle Holders for use with Elcometer 1020 Blast Machine | |||
ANH-19-F | 19mm (¾") | 34mm (1⅜") | BH19 |
NNH-13-F | 13mm (½") | 28mm (1⅛") | BH13 |
Aluminium Blast Nozzle Holders | |
Part Number | ANH-25* |
For Blast Hose Internal Diameter (ID) | 25mm (1") |
For Blast Hose Outside Diameter (OD) | 38mm (1½") |
Elcometer Blast Hose | BH25 |
Part Number | ANH-32* |
For Blast Hose Internal Diameter (ID) | 32mm (1¼") |
For Blast Hose Outside Diameter (OD) | 48mm (1⅞") |
Elcometer Blast Hose | BH32 & BH32X |
Part Number | ANH-38* |
For Blast Hose Internal Diameter (ID) | 38mm (1½") |
For Blast Hose Outside Diameter (OD) | 55mm (23⁄16")) |
Elcometer Blast Hose | BH38 & BH38X |
Nylon Blast Nozzle Holders | |
Part Number | NNH-19* |
For Blast Hose Internal Diameter (ID) | 19mm (¾") |
For Blast Hose Outside Diameter (OD) | 34mm (1⅜") |
Elcometer Blast Hose | BH19 |
Part Number | NNH-25* |
For Blast Hose Internal Diameter (ID) | 25mm (1") |
For Blast Hose Outside Diameter (OD) | 38mm (1½") |
Elcometer Blast Hose | BH25 |
Part Number | NNH-32* |
For Blast Hose Internal Diameter (ID) | 32mm (1¼") |
For Blast Hose Outside Diameter (OD) | 48mm (1⅞") |
Elcometer Blast Hose | BH32 & BH32X |
Part Number | NNH-38* |
For Blast Hose Internal Diameter (ID) | 38mm (1½") |
For Blast Hose Outside Diameter (OD) | 55mm (23⁄16")) |
Elcometer Blast Hose | BH38 & BH38X |
Blast Nozzle Holders for use with Elcometer 1020 Blast Machine | |
Part Number | ANH-19-F |
For Blast Hose Internal Diameter (ID) | 19mm (¾") |
For Blast Hose Outside Diameter (OD) | 34mm (1⅜") |
Elcometer Blast Hose | BH19 |
Part Number | NNH-13-F |
For Blast Hose Internal Diameter (ID) | 13mm (½") |
For Blast Hose Outside Diameter (OD) | 28mm (1⅛") |
Elcometer Blast Hose | BH13 |
For 1¼" NPSM Thread variants add '-N'
-
Aluminium Blast Nozzle Holder for BH25 Blast Hose
- Part Number (2" Contractor Thread): ANH-25-C
- Part Number (1¼" NPSM Thread) : ANH-25-N
-
Aluminium Blast Nozzle Holder for BH32 & BH32X Blast Hose
- Part Number (2" Contractor Thread): ANH-32-C
- Part Number (1¼" NPSM Thread) : ANH-32-N
-
Aluminium Blast Nozzle Holder for BH38 & BH38X Blast Hose
- Part Number (2" Contractor Thread): ANH-38-C
- Part Number (1¼" NPSM Thread) : ANH-38-N
-
Nylon Blast Nozzle Holder for BH19 Blast Hose
- Part Number (2" Contractor Thread): NNH-19-C
- Part Number (1¼" NPSM Thread) : NNH-19-N
-
Nylon Blast Nozzle Holder for BH25 Blast Hose
- Part Number (2" Contractor Thread): NNH-25-C
- Part Number (1¼" NPSM Thread) : NNH-25-N
-
Nylon Blast Nozzle Holder for BH32 & BH32X Blast Hose
- Part Number (2" Contractor Thread): NNH-32-C
- Part Number (1¼" NPSM Thread) : NNH-32-N
-
Nylon Blast Nozzle Holder for BH38 & BH38X Blast Hose
- Part Number (2" Contractor Thread): NNH-38-C
- Part Number (1¼" NPSM Thread) : NNH-38-N
-
Nylon Blast Nozzle Holder for use with Elcometer 1020 Blast Machine and BH19 Blast Hose
- Part Number : NNH-13-F
-
Aluminium Blast Nozzle Holder for use with Elcometer 1020 Blast Machine and BH19 Blast Hose
- Part Number : ANH-19-F
-
Part Number: MT29212-25CN-5
-
Part Number: MT29212-2532CA-5
-
Part Number: MT29212-32CN-5
-
Part Number: MT29212-13F-5
-
Part Number: MT29212-13F-25
-
Part Number: MT29212-25CN-25
-
Part Number: MT29212-2532CA-25
-
Part Number: MT29212-32CN-25