Elcometer Air Distribution Manifolds
Designed to maintain a consistent CFM air supply to up to six different air powered devices, Elcometer's range of high volume Air Distribution Manifolds are portable, heavy duty welded, and can be used at up to 15bar (217psi) working pressure.
- Summary
-
Summary
-
When connecting multiple air powered devices to a single compressor, the demands on air flow can vary as each device switches on or off. An Air Distribution Manifold reduces fluctuations in demand, acting as a buffer, to provide a more consistent air supply to multiple devices.
- Constructed using heavy duty 6mm (¼") steel thickness
- Supplied with plug as standard
- Can supply up to 6 different air powered devices
- Separates moisture from air supply through inbuilt moisture trap & baffle
- Designed for use with air compressors, up to a maximum working pressure of 15bar (217psi)
- Features built-in lifting lugs and wheels for easy manouverability around site
-
- Key Features
-
Key Features
Elcometer Air Distribution Manifolds
Elcometer’s Air Distribution Manifolds are designed with a range of features and benefits with the ability to connect up to six different air powered appliances at any one time, depending on the model.
1) Up to 6 outlets (dependent on model) with reducing bushes
2) Pressure plate
3) Robust, roller bearing wheels
4) 1” (25mm) pressure relief valve and optional pressure gauge outlet
5) Lifting lugs
6) Air inlet (size dependent on model)
7) ¾” (19mm) drain ball valve
-
- Downloads
-
Downloads
-
Elcometer Air Distribution Manifold - Data Sheet
-
Elcometer Air Distribution Manifold - Data Sheet ASME
-
Elcometer Air Distribution Manifold - User Guide
- Part Numbers
-
Part NumbersElcometer Air Distribution Manifolds
-
75 litre (2.6cu ft) Air Distribution Manifold with 5 outlets - PED Version- Part Number : ADM75
-
150 litre (5.3cu ft) Air Distribution Manifold with 5 outlets - PED Version- Part Number : ADM150
-
300 litre (10.6cu ft) Air Distribution Manifold with 6 outlets - PED Version- Part Number : ADM300
-
Elcometer Air Distribution Manifolds
Designed to maintain a consistent CFM air supply to up to six different air powered devices, Elcometer's range of high volume Air Distribution Manifolds are portable, heavy duty welded, and can be used at up to 15bar (217psi) working pressure.
Summary
Elcometer Air Distribution Manifolds
When connecting multiple air powered devices to a single compressor, the demands on air flow can vary as each device switches on or off. An Air Distribution Manifold reduces fluctuations in demand, acting as a buffer, to provide a more consistent air supply to multiple devices.
- Constructed using heavy duty 6mm (¼") steel thickness
- Supplied with plug as standard
- Can supply up to 6 different air powered devices
- Separates moisture from air supply through inbuilt moisture trap & baffle
- Designed for use with air compressors, up to a maximum working pressure of 15bar (217psi)
- Features built-in lifting lugs and wheels for easy manouverability around site
Downloads-
Elcometer Air Distribution Manifold - Data Sheet
-
Elcometer Air Distribution Manifold - Data Sheet ASME
-
Elcometer Air Distribution Manifold - User Guide
Key Features
Elcometer Air Distribution Manifolds
Elcometer’s Air Distribution Manifolds are designed with a range of features and benefits with the ability to connect up to six different air powered appliances at any one time, depending on the model.
1) Up to 6 outlets (dependent on model) with reducing bushes
2) Pressure plate
3) Robust, roller bearing wheels
4) 1” (25mm) pressure relief valve and optional pressure gauge outlet
5) Lifting lugs
6) Air inlet (size dependent on model)
7) ¾” (19mm) drain ball valve
Part NumbersElcometer Air Distribution Manifolds-
75 litre (2.6cu ft) Air Distribution Manifold with 5 outlets - PED Version
- Part Number : ADM75
-
150 litre (5.3cu ft) Air Distribution Manifold with 5 outlets - PED Version
- Part Number : ADM150
-
300 litre (10.6cu ft) Air Distribution Manifold with 6 outlets - PED Version
- Part Number : ADM300
-
-