Elcometer KARA Pompes de Transfert à Double Membrane
Ideal for use with water and solvent based materials, the Elcometer KARA double diaphragm transfer pumps are engineered to quickly and consistently supply fluid smoothly.
- Sommaire
-
Sommaire
-
With high 30-40 litres (6.6-8.8 gallons) per minute fluid delivery capacity, a smooth air change over valve and aluminium, stainless steel & PTFE polyamide construction Elcometer KARA transfer pumps are built to last.
Powerful performance
With up to 40 litres per minute maximum free flow, the Elcometer Kara's powerful fluid circulation keeps paint homogenous whilst ensuring pulse-free material flows to the application points, even with long fluid hoses. In fact, the Elcometer Kara's high performance can support multiple spray guns at once.Robust
Rugged stainless steel and aluminium construction to handle a wide variety of fluid types.Excellent cost of ownership
Designed with low air consumption, the Elcometer Kara helps to lower expensive compressor running costs.Versatile
Whether you are working with water based, solvent based or abrasive materials there is an Elcometer Kara Transfer Pump available with optional drum lid and rotary agitator to suit your requirements.
-
- Principales caractéristiques
-
Principales caractéristiques
Elcometer KARA Pompes de Transfert à Double Membrane
1) 40lpm (10.6gpm) fluid delivery capacity
2) Versatile front and top fluid outlets for ease of use
3) Low pulsing air distribution manifold uses durable metal to metal technology to prevent pump stalling
4) KARA 40 supplied with Polypropylene seats and PTFE balls for water based and solvent materials
5) Durable lightweight anodized aluminium pump housing
6) Fast and easy to service on site using standard tools to reduce downtime
7) KARA 40A Abrasive Transfer Pump is supplied with stainless steel balls and seats to suit ceramic based materials
8) Versatile front and top fluid outlets for ease of use
9) Stainless steel balls and seats for water based and semi viscous materials
10) Modular air valve provides smooth and rapid changeover for increased efficiency and minimised down time
11) Durable lightweight anodized aluminium pump housing
12) Lightweight, anti-corrosive Polyethylene (LDPE) centre housing
13) Available with 200 litre (44 gallons) drum lid and rotary agitator
The Elcometer KARA is suitable for use with...
The Elcometer KARA range is suitable for use with Solvent Based and Water Based materials as well a wide range of products.
Kara 30 & Kara 40 Single component (1k) epoxies Single component (1k) polyurethanes Plural (2k) & multi-component (3k) low viscose polyurethane epoxies¹ Water based enamel coatings Solvent-based primer and base coats Quick air dry enamel coatings Metallic-based epoxy coatings Wood stains High solid pre-catalysed lacquers Acid-catalyst wood lacquers Waterborne lacquers UV curable epoxies Water based UV coatings 1k fire-retardant coatings Natural wood oils Antimicrobial lacquers Sealers and undercoats - Kara 1-40A Inorganic zinc coatings Stove enamels Graphene-based materials Water based ceramic glaze coatings Abrasive coatings for cosmetic & glass Vitreous enamel Vitreous sanitaryware glaze Industrial porcelain coating Ceramic tableware glaze
-
- Informations techniques
-
Spécifications techniquesElcometer KARA Pompes de Transfert à Double Membrane
KARA 30 KARA 40 KARA 40A Ratio 1 : 1 1 : 1 1 : 1 Taille maximale des particules de fluide 0,25mm (10mils) 0,25mm (10mils) 0,25mm (10mils) Plage de température produit 4,4 - 60°C (40 - 140°F) 4,4 - 60°C (40 - 140°F) 4,4 - 60°C (40 - 140°F) Raccord entrée fluide 1/2” BSP Mâle 1/2” BSP Mâle 1/2” BSP Mâle Raccord sortie fluide 1/2” BSP Mâle 1/2” BSP Mâle 1/2” BSP Mâle Produits compatibles avec la pompe Solvants et produits à base d'eau Solvants et produits à base d'eau Abrasive, Solvants et produits à base d'eau COMPOSITION OF PARTS IN CONTACT WITH PRODUCT (WET) Sièges Acier inoxydable Polypropylene Acier inoxydable Billes Acier inoxydable PTFE Acier inoxydable Membrane Polyethylene PTFE PTFE Corps de pompe / Boîtier de vérin Polyéthylène / Aluminium PTFE / Aluminium PTFE / Aluminium Partie centrale Aluminium Polyamide Polyamide EXTERNAL PUMP PARTS (DRY) Corps de pompe / Boîtier de vérin Polyamide / Aluminium Polyamide / Aluminium Polyamide / Aluminium AIR Pression d'air plage de fonctionnement 1-6bar (14-87psi) 1-7bar (14-101psi) 1-7bar (14-101psi) Consommation d'air: 3 bar (43,5 psi) et 7,5 CPM 1,8lpm (0,06cfm) - - Consommation d'air 3 bar (43,5 psi) et 16 CPM - 7,92lpm (0,28cfm) 7,92lpm (0,28cfm) Pression entrée d'air maximale 6bar (87psi) 7bar (101psi) 7bar (101psi) Entrée d'air 1/4” BSP Femelle 1/4” BSP Femelle 1/4” BSP Femelle Port d'échappement d'air / silencieux 1/2” BSP Femelle 1/2” BSP Femelle 1/2” BSP Femelle Caractéristiques du compresseur (minimum) No Minimum No Minimum No Minimum Température de l'air ambiant Plage de fonctionnement 4,4 - 60°C (40 - 140°F) 4,4 - 60°C (40 - 140°F) 4,4 - 60°C (40 - 140°F) FLUID / PRODUCT Pression de travail maxi sortie produit 6bar (87psi) 7bar (101psi) 7bar (101psi) Rendement produit par cycle 80 cc (2,61 fl oz) 165 cc (4,61 fl oz) 165 cc (4,61 fl oz) Maximum Free Flow 30 lpm (7,9 gpm) 40 lpm (10,6 gpm) 40 lpm (10,6 gpm) Distribution Free Flow* @ 60 CPM 4,8 lpm (1,26 gpm) 10 lpm (2,64 gpm) 10 lpm (2,64 gpm) DIMENSIONS Poids (pompe seule) 3,3 kg (7,3lb) 4,6kg (10,1lb) 4,8kg (10,6lb) Dimensions (montage mural) 185 x 141 x 215mm (7,3 x 5,6 x 8,5”) 210 x 204 x 270mm (8,3 x 8 x 10,6") 210 x 204 x 270mm (8,3 x 8 x 10,6") KARA 30 Ratio 1 : 1 Taille maximale des particules de fluide 0,25mm (10mils) Plage de température produit 4,4 - 60°C (40 - 140°F) Raccord entrée fluide 1/2” BSP Mâle Raccord sortie fluide 1/2” BSP Mâle Produits compatibles avec la pompe Solvants et produits à base d'eau COMPOSITION OF PARTS IN CONTACT WITH PRODUCT (WET) Sièges Acier inoxydable Billes Acier inoxydable Membrane Polyethylene Corps de pompe / Boîtier de vérin Polyéthylène / Aluminium Partie centrale Aluminium EXTERNAL PUMP PARTS (DRY) Corps de pompe / Boîtier de vérin Polyamide / Aluminium AIR Pression d'air plage de fonctionnement 1-6bar (14-87psi) Consommation d'air: 3 bar (43,5 psi) et 7,5 CPM 1,8lpm (0,06cfm) Consommation d'air 3 bar (43,5 psi) et 16 CPM - Pression entrée d'air maximale 6bar (87psi) Entrée d'air 1/4” BSP Femelle Port d'échappement d'air / silencieux 1/2” BSP Femelle Caractéristiques du compresseur (minimum) No Minimum Température de l'air ambiant Plage de fonctionnement 4,4 - 60°C (40 - 140°F) FLUID / PRODUCT Pression de travail maxi sortie produit 6bar (87psi) Rendement produit par cycle 80 cc (2,61 fl oz) Maximum Free Flow 30 lpm (7,9 gpm) Distribution Free Flow* @ 60 CPM 4,8 lpm (1,26 gpm) DIMENSIONS Poids (pompe seule) 3,3 kg (7,3lb) Dimensions (montage mural) 185 x 141 x 215mm (7,3 x 5,6 x 8,5”) KARA 40 Ratio 1 : 1 Taille maximale des particules de fluide 0,25mm (10mils) Plage de température produit 4,4 - 60°C (40 - 140°F) Raccord entrée fluide 1/2” BSP Mâle Raccord sortie fluide 1/2” BSP Mâle Produits compatibles avec la pompe Solvants et produits à base d'eau COMPOSITION OF PARTS IN CONTACT WITH PRODUCT (WET) Sièges Polypropylene Billes PTFE Membrane PTFE Corps de pompe / Boîtier de vérin PTFE / Aluminium Partie centrale Polyamide EXTERNAL PUMP PARTS (DRY) Corps de pompe / Boîtier de vérin Polyamide / Aluminium AIR Pression d'air plage de fonctionnement 1-7bar (14-101psi) Consommation d'air: 3 bar (43,5 psi) et 7,5 CPM - Consommation d'air 3 bar (43,5 psi) et 16 CPM 7,92lpm (0,28cfm) Pression entrée d'air maximale 7bar (101psi) Entrée d'air 1/4” BSP Femelle Port d'échappement d'air / silencieux 1/2” BSP Femelle Caractéristiques du compresseur (minimum) No Minimum Température de l'air ambiant Plage de fonctionnement 4,4 - 60°C (40 - 140°F) FLUID / PRODUCT Pression de travail maxi sortie produit 7bar (101psi) Rendement produit par cycle 165 cc (4,61 fl oz) Maximum Free Flow 40 lpm (10,6 gpm) Distribution Free Flow* @ 60 CPM 10 lpm (2,64 gpm) DIMENSIONS Poids (pompe seule) 4,6kg (10,1lb) Dimensions (montage mural) 210 x 204 x 270mm (8,3 x 8 x 10,6") KARA 40A Ratio 1 : 1 Taille maximale des particules de fluide 0,25mm (10mils) Plage de température produit 4,4 - 60°C (40 - 140°F) Raccord entrée fluide 1/2” BSP Mâle Raccord sortie fluide 1/2” BSP Mâle Produits compatibles avec la pompe Abrasive, Solvants et produits à base d'eau COMPOSITION OF PARTS IN CONTACT WITH PRODUCT (WET) Sièges Acier inoxydable Billes Acier inoxydable Membrane PTFE Corps de pompe / Boîtier de vérin PTFE / Aluminium Partie centrale Polyamide EXTERNAL PUMP PARTS (DRY) Corps de pompe / Boîtier de vérin Polyamide / Aluminium AIR Pression d'air plage de fonctionnement 1-7bar (14-101psi) Consommation d'air: 3 bar (43,5 psi) et 7,5 CPM - Consommation d'air 3 bar (43,5 psi) et 16 CPM 7,92lpm (0,28cfm) Pression entrée d'air maximale 7bar (101psi) Entrée d'air 1/4” BSP Femelle Port d'échappement d'air / silencieux 1/2” BSP Femelle Caractéristiques du compresseur (minimum) No Minimum Température de l'air ambiant Plage de fonctionnement 4,4 - 60°C (40 - 140°F) FLUID / PRODUCT Pression de travail maxi sortie produit 7bar (101psi) Rendement produit par cycle 165 cc (4,61 fl oz) Maximum Free Flow 40 lpm (10,6 gpm) Distribution Free Flow* @ 60 CPM 10 lpm (2,64 gpm) DIMENSIONS Poids (pompe seule) 4,8kg (10,6lb) Dimensions (montage mural) 210 x 204 x 270mm (8,3 x 8 x 10,6") 1. With suction hose or deposit and pump output filter.
2. Product Output per Cycle = Fluid Displacement per Cycle
2.Maximum Free Flow is the volume of fluid the pump is able to transfer at maximum speed and at an undefined number of cycles.
3. Maximum values with water as test media.
lpm: Litres per minute fl oz/min: US Fluid ounces per minute gpm: US Gallons per minute CPM: Cycles per minute
-
- Téléchargements
-
- Numéro d'article
-
Numéro d'articleElcometer KARA Pompes de Transfert à Double MembraneNo data found!!
-
Elcometer Kara 30 Double Diaphragm Transfer Pump
- Numéro d'article : PTD130AS
-
Elcometer Kara 40 Double Diaphragm Transfer Pump
- Numéro d'article : PTD140AS
-
Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
- Numéro d'article : PTD140AAS
-
Elcometer 200 Drum Cover with Elcometer Kara 40 Double Diaphragm Transfer Pump
- Numéro d'article : PSD140AS-C
-
Elcometer 200 Drum Cover with Elcometer Kara 40 Double Diaphragm Transfer Pump & Rotary Agitator
- Numéro d'article : PSD140AS-C-RA
- Accessoires
-
AccessoiresElcometer KARA Pompes de Transfert à Double Membrane
-
Numéro d'article: 56414024
-
Numéro d'article: 56414025
-
Numéro d'article: 56414027
-
Numéro d'article: 56414026
-
Numéro d'article: PT56414130
-
Numéro d'article: PT56414039
-
Numéro d'article: PT56414044
-
Numéro d'article: PT56414040
-
Numéro d'article: PT56414041
-
Numéro d'article: PT56414042
-
Numéro d'article: PT56414028
-
Numéro d'article: PT56414116
-
Numéro d'article: PT56414117
-
Numéro d'article: PT56414115
-
Numéro d'article: PT56414118
-
Numéro d'article: PT56414119
-
-
- Home
- Equipement de Peinture
- Pompes de Transfert & Couvercles de Fûts
- Elcometer KARA Pompes de Transfert à Double Membrane
Elcometer KARA Pompes de Transfert à Double Membrane
Ideal for use with water and solvent based materials, the Elcometer KARA double diaphragm transfer pumps are engineered to quickly and consistently supply fluid smoothly.
Sommaire
Elcometer KARA Pompes de Transfert à Double Membrane
With high 30-40 litres (6.6-8.8 gallons) per minute fluid delivery capacity, a smooth air change over valve and aluminium, stainless steel & PTFE polyamide construction Elcometer KARA transfer pumps are built to last.
Powerful performance
With up to 40 litres per minute maximum free flow, the Elcometer Kara's powerful fluid circulation keeps paint homogenous whilst ensuring pulse-free material flows to the application points, even with long fluid hoses. In fact, the Elcometer Kara's high performance can support multiple spray guns at once.Robust
Rugged stainless steel and aluminium construction to handle a wide variety of fluid types.Excellent cost of ownership
Designed with low air consumption, the Elcometer Kara helps to lower expensive compressor running costs.Versatile
Whether you are working with water based, solvent based or abrasive materials there is an Elcometer Kara Transfer Pump available with optional drum lid and rotary agitator to suit your requirements.Principales caractéristiques
Elcometer KARA Pompes de Transfert à Double Membrane
1) 40lpm (10.6gpm) fluid delivery capacity
2) Versatile front and top fluid outlets for ease of use
3) Low pulsing air distribution manifold uses durable metal to metal technology to prevent pump stalling
4) KARA 40 supplied with Polypropylene seats and PTFE balls for water based and solvent materials
5) Durable lightweight anodized aluminium pump housing
6) Fast and easy to service on site using standard tools to reduce downtime
7) KARA 40A Abrasive Transfer Pump is supplied with stainless steel balls and seats to suit ceramic based materials
8) Versatile front and top fluid outlets for ease of use
9) Stainless steel balls and seats for water based and semi viscous materials
10) Modular air valve provides smooth and rapid changeover for increased efficiency and minimised down time
11) Durable lightweight anodized aluminium pump housing
12) Lightweight, anti-corrosive Polyethylene (LDPE) centre housing
13) Available with 200 litre (44 gallons) drum lid and rotary agitator
The Elcometer KARA is suitable for use with...
The Elcometer KARA range is suitable for use with Solvent Based and Water Based materials as well a wide range of products.
Kara 30 & Kara 40 Single component (1k) epoxies Single component (1k) polyurethanes Plural (2k) & multi-component (3k) low viscose polyurethane epoxies¹ Water based enamel coatings Solvent-based primer and base coats Quick air dry enamel coatings Metallic-based epoxy coatings Wood stains High solid pre-catalysed lacquers Acid-catalyst wood lacquers Waterborne lacquers UV curable epoxies Water based UV coatings 1k fire-retardant coatings Natural wood oils Antimicrobial lacquers Sealers and undercoats - Kara 1-40A Inorganic zinc coatings Stove enamels Graphene-based materials Water based ceramic glaze coatings Abrasive coatings for cosmetic & glass Vitreous enamel Vitreous sanitaryware glaze Industrial porcelain coating Ceramic tableware glaze Spécifications techniquesElcometer KARA Pompes de Transfert à Double MembraneKARA 30 KARA 40 KARA 40A Ratio 1 : 1 1 : 1 1 : 1 Taille maximale des particules de fluide 0,25mm (10mils) 0,25mm (10mils) 0,25mm (10mils) Plage de température produit 4,4 - 60°C (40 - 140°F) 4,4 - 60°C (40 - 140°F) 4,4 - 60°C (40 - 140°F) Raccord entrée fluide 1/2” BSP Mâle 1/2” BSP Mâle 1/2” BSP Mâle Raccord sortie fluide 1/2” BSP Mâle 1/2” BSP Mâle 1/2” BSP Mâle Produits compatibles avec la pompe Solvants et produits à base d'eau Solvants et produits à base d'eau Abrasive, Solvants et produits à base d'eau COMPOSITION OF PARTS IN CONTACT WITH PRODUCT (WET) Sièges Acier inoxydable Polypropylene Acier inoxydable Billes Acier inoxydable PTFE Acier inoxydable Membrane Polyethylene PTFE PTFE Corps de pompe / Boîtier de vérin Polyéthylène / Aluminium PTFE / Aluminium PTFE / Aluminium Partie centrale Aluminium Polyamide Polyamide EXTERNAL PUMP PARTS (DRY) Corps de pompe / Boîtier de vérin Polyamide / Aluminium Polyamide / Aluminium Polyamide / Aluminium AIR Pression d'air plage de fonctionnement 1-6bar (14-87psi) 1-7bar (14-101psi) 1-7bar (14-101psi) Consommation d'air: 3 bar (43,5 psi) et 7,5 CPM 1,8lpm (0,06cfm) - - Consommation d'air 3 bar (43,5 psi) et 16 CPM - 7,92lpm (0,28cfm) 7,92lpm (0,28cfm) Pression entrée d'air maximale 6bar (87psi) 7bar (101psi) 7bar (101psi) Entrée d'air 1/4” BSP Femelle 1/4” BSP Femelle 1/4” BSP Femelle Port d'échappement d'air / silencieux 1/2” BSP Femelle 1/2” BSP Femelle 1/2” BSP Femelle Caractéristiques du compresseur (minimum) No Minimum No Minimum No Minimum Température de l'air ambiant Plage de fonctionnement 4,4 - 60°C (40 - 140°F) 4,4 - 60°C (40 - 140°F) 4,4 - 60°C (40 - 140°F) FLUID / PRODUCT Pression de travail maxi sortie produit 6bar (87psi) 7bar (101psi) 7bar (101psi) Rendement produit par cycle 80 cc (2,61 fl oz) 165 cc (4,61 fl oz) 165 cc (4,61 fl oz) Maximum Free Flow 30 lpm (7,9 gpm) 40 lpm (10,6 gpm) 40 lpm (10,6 gpm) Distribution Free Flow* @ 60 CPM 4,8 lpm (1,26 gpm) 10 lpm (2,64 gpm) 10 lpm (2,64 gpm) DIMENSIONS Poids (pompe seule) 3,3 kg (7,3lb) 4,6kg (10,1lb) 4,8kg (10,6lb) Dimensions (montage mural) 185 x 141 x 215mm (7,3 x 5,6 x 8,5”) 210 x 204 x 270mm (8,3 x 8 x 10,6") 210 x 204 x 270mm (8,3 x 8 x 10,6") KARA 30 Ratio 1 : 1 Taille maximale des particules de fluide 0,25mm (10mils) Plage de température produit 4,4 - 60°C (40 - 140°F) Raccord entrée fluide 1/2” BSP Mâle Raccord sortie fluide 1/2” BSP Mâle Produits compatibles avec la pompe Solvants et produits à base d'eau COMPOSITION OF PARTS IN CONTACT WITH PRODUCT (WET) Sièges Acier inoxydable Billes Acier inoxydable Membrane Polyethylene Corps de pompe / Boîtier de vérin Polyéthylène / Aluminium Partie centrale Aluminium EXTERNAL PUMP PARTS (DRY) Corps de pompe / Boîtier de vérin Polyamide / Aluminium AIR Pression d'air plage de fonctionnement 1-6bar (14-87psi) Consommation d'air: 3 bar (43,5 psi) et 7,5 CPM 1,8lpm (0,06cfm) Consommation d'air 3 bar (43,5 psi) et 16 CPM - Pression entrée d'air maximale 6bar (87psi) Entrée d'air 1/4” BSP Femelle Port d'échappement d'air / silencieux 1/2” BSP Femelle Caractéristiques du compresseur (minimum) No Minimum Température de l'air ambiant Plage de fonctionnement 4,4 - 60°C (40 - 140°F) FLUID / PRODUCT Pression de travail maxi sortie produit 6bar (87psi) Rendement produit par cycle 80 cc (2,61 fl oz) Maximum Free Flow 30 lpm (7,9 gpm) Distribution Free Flow* @ 60 CPM 4,8 lpm (1,26 gpm) DIMENSIONS Poids (pompe seule) 3,3 kg (7,3lb) Dimensions (montage mural) 185 x 141 x 215mm (7,3 x 5,6 x 8,5”) KARA 40 Ratio 1 : 1 Taille maximale des particules de fluide 0,25mm (10mils) Plage de température produit 4,4 - 60°C (40 - 140°F) Raccord entrée fluide 1/2” BSP Mâle Raccord sortie fluide 1/2” BSP Mâle Produits compatibles avec la pompe Solvants et produits à base d'eau COMPOSITION OF PARTS IN CONTACT WITH PRODUCT (WET) Sièges Polypropylene Billes PTFE Membrane PTFE Corps de pompe / Boîtier de vérin PTFE / Aluminium Partie centrale Polyamide EXTERNAL PUMP PARTS (DRY) Corps de pompe / Boîtier de vérin Polyamide / Aluminium AIR Pression d'air plage de fonctionnement 1-7bar (14-101psi) Consommation d'air: 3 bar (43,5 psi) et 7,5 CPM - Consommation d'air 3 bar (43,5 psi) et 16 CPM 7,92lpm (0,28cfm) Pression entrée d'air maximale 7bar (101psi) Entrée d'air 1/4” BSP Femelle Port d'échappement d'air / silencieux 1/2” BSP Femelle Caractéristiques du compresseur (minimum) No Minimum Température de l'air ambiant Plage de fonctionnement 4,4 - 60°C (40 - 140°F) FLUID / PRODUCT Pression de travail maxi sortie produit 7bar (101psi) Rendement produit par cycle 165 cc (4,61 fl oz) Maximum Free Flow 40 lpm (10,6 gpm) Distribution Free Flow* @ 60 CPM 10 lpm (2,64 gpm) DIMENSIONS Poids (pompe seule) 4,6kg (10,1lb) Dimensions (montage mural) 210 x 204 x 270mm (8,3 x 8 x 10,6") KARA 40A Ratio 1 : 1 Taille maximale des particules de fluide 0,25mm (10mils) Plage de température produit 4,4 - 60°C (40 - 140°F) Raccord entrée fluide 1/2” BSP Mâle Raccord sortie fluide 1/2” BSP Mâle Produits compatibles avec la pompe Abrasive, Solvants et produits à base d'eau COMPOSITION OF PARTS IN CONTACT WITH PRODUCT (WET) Sièges Acier inoxydable Billes Acier inoxydable Membrane PTFE Corps de pompe / Boîtier de vérin PTFE / Aluminium Partie centrale Polyamide EXTERNAL PUMP PARTS (DRY) Corps de pompe / Boîtier de vérin Polyamide / Aluminium AIR Pression d'air plage de fonctionnement 1-7bar (14-101psi) Consommation d'air: 3 bar (43,5 psi) et 7,5 CPM - Consommation d'air 3 bar (43,5 psi) et 16 CPM 7,92lpm (0,28cfm) Pression entrée d'air maximale 7bar (101psi) Entrée d'air 1/4” BSP Femelle Port d'échappement d'air / silencieux 1/2” BSP Femelle Caractéristiques du compresseur (minimum) No Minimum Température de l'air ambiant Plage de fonctionnement 4,4 - 60°C (40 - 140°F) FLUID / PRODUCT Pression de travail maxi sortie produit 7bar (101psi) Rendement produit par cycle 165 cc (4,61 fl oz) Maximum Free Flow 40 lpm (10,6 gpm) Distribution Free Flow* @ 60 CPM 10 lpm (2,64 gpm) DIMENSIONS Poids (pompe seule) 4,8kg (10,6lb) Dimensions (montage mural) 210 x 204 x 270mm (8,3 x 8 x 10,6") 1. With suction hose or deposit and pump output filter.
2. Product Output per Cycle = Fluid Displacement per Cycle
2.Maximum Free Flow is the volume of fluid the pump is able to transfer at maximum speed and at an undefined number of cycles.
3. Maximum values with water as test media.
lpm: Litres per minute fl oz/min: US Fluid ounces per minute gpm: US Gallons per minute CPM: Cycles per minuteNuméro d'articleElcometer KARA Pompes de Transfert à Double MembraneNo data found!!-
Elcometer Kara 30 Double Diaphragm Transfer Pump
- Numéro d'article : PTD130AS
-
Elcometer Kara 40 Double Diaphragm Transfer Pump
- Numéro d'article : PTD140AS
-
Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
- Numéro d'article : PTD140AAS
-
Elcometer 200 Drum Cover with Elcometer Kara 40 Double Diaphragm Transfer Pump
- Numéro d'article : PSD140AS-C
-
Elcometer 200 Drum Cover with Elcometer Kara 40 Double Diaphragm Transfer Pump & Rotary Agitator
- Numéro d'article : PSD140AS-C-RA
AccessoiresElcometer KARA Pompes de Transfert à Double Membrane-
Numéro d'article: 56414024
-
Numéro d'article: 56414025
-
Numéro d'article: 56414027
-
Numéro d'article: 56414026
-
Numéro d'article: PT56414130
-
Numéro d'article: PT56414039
-
Numéro d'article: PT56414044
-
Numéro d'article: PT56414040
-
Numéro d'article: PT56414041
-
Numéro d'article: PT56414042
-
Numéro d'article: PT56414028
-
Numéro d'article: PT56414116
-
Numéro d'article: PT56414117
-
Numéro d'article: PT56414115
-
Numéro d'article: PT56414118
-
Numéro d'article: PT56414119
- Numéro d'article
-