Shear Wave Standard Transducers

Standard-Shear-Wave-Transducer

Large single element transducers designed for use with angle beam wedges for a powerful flaw detection solution.

  • Summary
    • Summary

    • Shear Wave Standard Transducers can be fixed to wedges of different angles to produce shear wave velocity measurements.

      When used in conjunction with the ‘Trigonometry’ feature of the gauge, the transducer will produce instrumental flaw detection sound shear waves.

  • Key Features
    • Key Features

      Shear Wave Standard Transducers

      Shear Wave Standard Transducer Characteristics Explained

      High-damped_1

      High Damped
      Limiting the duration or decreasing the amplitude of vibrations. For use with EE (ThruPaint™) only.

      high-resolution_1

      High Resolution
      Features increased near surface resolution, ideal for use on thin substrates.

  • Technical Information
    • Technical Information
      Shear Wave Standard Transducers
       
      Part Number Probe Diameter Probe Characteristic
      Connector Type Suitable for measuring

      Damping

      Microdot

      BNC

      Cast Iron

      Steel

      Common Metals

      Rough Surfaces

      Castings

      Billets

      Weld Inspection

      1.00 MHz Shear Wave Standard Transducers
      TF1M00EE-1 1/2 x 1/2" Composite
      S  
       
      TF1M00EH-3 1/2 x 1" Composite
      S  
       
      TF1M00FF-1 5/8 x 5/8" Composite
      S  
       
      TF1M00GF-1 5/8 x 3/4" Composite
      S  
       
      TF1M00GG-1 3/4 x 3/4" Composite
      S  
       
      TF1M00EE-2 1/2 x 1/2" Composite
      S
       
       
      TF1M00EH-4 1/2 x 1" Composite
      S
       
       
      TF1M00FF-2 5/8 x 5/8" Composite
      S
       
       
      TF1M00GF-2 5/8 x 3/4" Composite
      S
       
       
      TF1M00GG-2 3/4 x 3/4" Composite
      S
       
       
      2.25 MHz Shear Wave Standard Transducers
      TF2M25EEG-1 1/2 x 1/2" Standard
      HG  
       
      TF2M25EHG-1 1/2 x 1" Standard
      HG  
       
      TF2M25FFG-1 5/8 x 5/8" Standard
      HG  
       
      TF2M25GFG-1 5/8 x 3/4" Standard
      HG  
       
      TF2M25GGG-1 3/4 x 3/4" Standard
      HG  
       
      TF2M25EEG-2 1/2 x 1/2" Standard
      HG
       
       
      TF2M25EHG-2 1/2 x 1" Standard
      HG
       
       
      TF2M25FFG-2 5/8 x 5/8" Standard
      HG
       
       
      TF2M25GFG-2 5/8 x 3/4" Standard
      HG
       
       
       
      TF2M25GGG-2 3/4 x 3/4" Standard
      HG
       
       
      TF2M25EER-1 1/2 x 1/2" Standard
      R  
       
      TF2M25EHR-1 1/2 x 1" Standard
      R  
       
      TF2M25FFR-1 5/8 x 5/8" Standard
      R  
       
      TF2M25GFR-1 5/8 x 3/4" Standard
      R  
       
      TF2M25GGR-1 3/4 x 3/4" Standard
      R  
       
      TF2M25EER-2 1/2 x 1/2" Standard
      R
       
       
      TF2M25EHR-2 1/2 x 1" Standard
      R
       
       
      TF2M25FFR-2 5/8 x 5/8" Standard
      R
       
       
      TF2M25GFR-2 5/8 x 3/4" Standard
      R
       
       
      TF2M25GGR-2 3/4 x 3/4" Standard
      R
       
       
      5.00 MHz Shear Wave Standard Transducers
      TF5M00EEG-1 1/2 x 1" Standard
      HG  
       
      TF5M00EHG-1 1/2 x 1" Standard
      HG  
       
      TF5M00FFG-1 5/8 x 5/8" Standard
      HG  
       
      TF5M00GFG-1 3/4 x 5/8" Standard
      HG  
       
      TF5M00GGG-1 3/4 x 3/4" Standard
      HG  
       
      TF5M00EEG-2 1/2 x 1/2" Standard
      HG
         
      TF5M00EHG-2 1/2 x 1" Standard
      HG
         
      TF5M00FFG-2 5/8 x 5/8" Standard
      HG
         
      TF5M00GFG-2 3/4 x 5/8" Standard
      HG
         
      TF5M00GGG-2 3/4 x 3/4" Standard
      HG
         
      TF5M00EER-1 1/2 x 1/2" Standard
      R  
       
      TF5M00EHR-1 1/2 x 1" Standard
      R  
       
      TF5M00FFR-1 5/8 x 5/8" Standard
      R  
       
      TF5M00GFR-1 3/4 x 5/8" Standard
      R  
       
      TF5M00GGR-1 3/4 x 3/4" Standard
      R  
       
      TF5M00EER-2 1/2 x 1/2" Standard
      R
         
      TF5M00EHR-2 1/2 x 1" Standard
      R
         
      TF5M00FFR-2 5/8 x 5/8" Standard
      R
         
      TF5M00GFR-2 3/4 x 5/8" Standard
      R
         
      TF5M00GGR-2 3/4 x 3/4" Standard
      R
         
      1.00 MHz Shear Wave Standard Transducers
      Part Number TF1M00EE-1
      Probe Diameter 1/2 x 1/2"
      Probe Characteristic Composite
      Damping S
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF1M00EH-3
      Probe Diameter 1/2 x 1"
      Probe Characteristic Composite
      Damping S
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF1M00FF-1
      Probe Diameter 5/8 x 5/8"
      Probe Characteristic Composite
      Damping S
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF1M00GF-1
      Probe Diameter 5/8 x 3/4"
      Probe Characteristic Composite
      Damping S
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF1M00GG-1
      Probe Diameter 3/4 x 3/4"
      Probe Characteristic Composite
      Damping S
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF1M00EE-2
      Probe Diameter 1/2 x 1/2"
      Probe Characteristic Composite
      Damping S
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF1M00EH-4
      Probe Diameter 1/2 x 1"
      Probe Characteristic Composite
      Damping S
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF1M00FF-2
      Probe Diameter 5/8 x 5/8"
      Probe Characteristic Composite
      Damping S
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF1M00GF-2
      Probe Diameter 5/8 x 3/4"
      Probe Characteristic Composite
      Damping S
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF1M00GG-2
      Probe Diameter 3/4 x 3/4"
      Probe Characteristic Composite
      Damping S
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      2.25 MHz Shear Wave Standard Transducers
      Part Number TF2M25EEG-1
      Probe Diameter 1/2 x 1/2"
      Probe Characteristic Standard
      Damping HG
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF2M25EHG-1
      Probe Diameter 1/2 x 1"
      Probe Characteristic Standard
      Damping HG
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF2M25FFG-1
      Probe Diameter 5/8 x 5/8"
      Probe Characteristic Standard
      Damping HG
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF2M25GFG-1
      Probe Diameter 5/8 x 3/4"
      Probe Characteristic Standard
      Damping HG
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF2M25GGG-1
      Probe Diameter 3/4 x 3/4"
      Probe Characteristic Standard
      Damping HG
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF2M25EEG-2
      Probe Diameter 1/2 x 1/2"
      Probe Characteristic Standard
      Damping HG
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF2M25EHG-2
      Probe Diameter 1/2 x 1"
      Probe Characteristic Standard
      Damping HG
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF2M25FFG-2
      Probe Diameter 5/8 x 5/8"
      Probe Characteristic Standard
      Damping HG
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF2M25GFG-2
      Probe Diameter 5/8 x 3/4"
      Probe Characteristic Standard
      Damping HG
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection  
      Part Number TF2M25GGG-2
      Probe Diameter 3/4 x 3/4"
      Probe Characteristic Standard
      Damping HG
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF2M25EER-1
      Probe Diameter 1/2 x 1/2"
      Probe Characteristic Standard
      Damping R
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF2M25EHR-1
      Probe Diameter 1/2 x 1"
      Probe Characteristic Standard
      Damping R
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF2M25FFR-1
      Probe Diameter 5/8 x 5/8"
      Probe Characteristic Standard
      Damping R
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF2M25GFR-1
      Probe Diameter 5/8 x 3/4"
      Probe Characteristic Standard
      Damping R
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF2M25GGR-1
      Probe Diameter 3/4 x 3/4"
      Probe Characteristic Standard
      Damping R
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF2M25EER-2
      Probe Diameter 1/2 x 1/2"
      Probe Characteristic Standard
      Damping R
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF2M25EHR-2
      Probe Diameter 1/2 x 1"
      Probe Characteristic Standard
      Damping R
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF2M25FFR-2
      Probe Diameter 5/8 x 5/8"
      Probe Characteristic Standard
      Damping R
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF2M25GFR-2
      Probe Diameter 5/8 x 3/4"
      Probe Characteristic Standard
      Damping R
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF2M25GGR-2
      Probe Diameter 3/4 x 3/4"
      Probe Characteristic Standard
      Damping R
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron
      Steel
      Common Metals  
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      5.00 MHz Shear Wave Standard Transducers
      Part Number TF5M00EEG-1
      Probe Diameter 1/2 x 1"
      Probe Characteristic Standard
      Damping HG
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron  
      Steel
      Common Metals
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF5M00EHG-1
      Probe Diameter 1/2 x 1"
      Probe Characteristic Standard
      Damping HG
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron  
      Steel
      Common Metals
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF5M00FFG-1
      Probe Diameter 5/8 x 5/8"
      Probe Characteristic Standard
      Damping HG
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron  
      Steel
      Common Metals
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF5M00GFG-1
      Probe Diameter 3/4 x 5/8"
      Probe Characteristic Standard
      Damping HG
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron  
      Steel
      Common Metals
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF5M00GGG-1
      Probe Diameter 3/4 x 3/4"
      Probe Characteristic Standard
      Damping HG
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron  
      Steel
      Common Metals
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF5M00EEG-2
      Probe Diameter 1/2 x 1/2"
      Probe Characteristic Standard
      Damping HG
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron  
      Steel
      Common Metals
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF5M00EHG-2
      Probe Diameter 1/2 x 1"
      Probe Characteristic Standard
      Damping HG
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron  
      Steel
      Common Metals
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF5M00FFG-2
      Probe Diameter 5/8 x 5/8"
      Probe Characteristic Standard
      Damping HG
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron  
      Steel
      Common Metals
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF5M00GFG-2
      Probe Diameter 3/4 x 5/8"
      Probe Characteristic Standard
      Damping HG
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron  
      Steel
      Common Metals
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF5M00GGG-2
      Probe Diameter 3/4 x 3/4"
      Probe Characteristic Standard
      Damping HG
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron  
      Steel
      Common Metals
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF5M00EER-1
      Probe Diameter 1/2 x 1/2"
      Probe Characteristic Standard
      Damping R
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron  
      Steel
      Common Metals
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF5M00EHR-1
      Probe Diameter 1/2 x 1"
      Probe Characteristic Standard
      Damping R
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron  
      Steel
      Common Metals
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF5M00FFR-1
      Probe Diameter 5/8 x 5/8"
      Probe Characteristic Standard
      Damping R
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron  
      Steel
      Common Metals
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF5M00GFR-1
      Probe Diameter 3/4 x 5/8"
      Probe Characteristic Standard
      Damping R
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron  
      Steel
      Common Metals
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF5M00GGR-1
      Probe Diameter 3/4 x 3/4"
      Probe Characteristic Standard
      Damping R
      Connector Type
      Microdot  
      BNC
      Suitable for measuring
      Cast Iron  
      Steel
      Common Metals
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF5M00EER-2
      Probe Diameter 1/2 x 1/2"
      Probe Characteristic Standard
      Damping R
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron  
      Steel
      Common Metals
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF5M00EHR-2
      Probe Diameter 1/2 x 1"
      Probe Characteristic Standard
      Damping R
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron  
      Steel
      Common Metals
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF5M00FFR-2
      Probe Diameter 5/8 x 5/8"
      Probe Characteristic Standard
      Damping R
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron  
      Steel
      Common Metals
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF5M00GFR-2
      Probe Diameter 3/4 x 5/8"
      Probe Characteristic Standard
      Damping R
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron  
      Steel
      Common Metals
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      Part Number TF5M00GGR-2
      Probe Diameter 3/4 x 3/4"
      Probe Characteristic Standard
      Damping R
      Connector Type
      Microdot
      BNC  
      Suitable for measuring
      Cast Iron  
      Steel
      Common Metals
      Rough Surfaces
      Castings
      Billets
      Weld Inspection
      S - Standard Undamped Transducer
      HG - High Gain Damping Transducers
      R - Resolution Transducer
  • Part Numbers
    • Part Numbers
      Shear Wave Standard Transducers
      • 1.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 1/2 x 1/2"
        • Probe Characteristic: Composite
        • Part Number : TF1M00EE-1
      • 1.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 1/2 x 1"
        • Probe Characteristic: Composite
        • Part Number : TF1M00EH-3
      • 1.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 5/8 x 5/8"
        • Probe Characteristic: Composite
        • Part Number : TF1M00FF-1
      • 1.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 5/8 x 3/4"
        • Probe Characteristic: Composite
        • Part Number : TF1M00GF-1
      • 1.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 3/4 x 3/4"
        • Probe Characteristic: Composite
        • Part Number : TF1M00GG-1
      • 1.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 1/2 x 1/2"
        • Probe Characteristic: Composite
        • Part Number : TF1M00EE-2
      • 1.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 1/2 x 1"
        • Probe Characteristic: Composite
        • Part Number : TF1M00EH-4
      • 1.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 5/8 x 5/8"
        • Probe Characteristic: Composite
        • Part Number : TF1M00FF-2
      • 1.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 5/8 x 3/4"
        • Probe Characteristic: Composite
        • Part Number : TF1M00GF-2
      • 1.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 3/4 x 3/4"
        • Probe Characteristic: Composite
        • Part Number : TF1M00GG-2
      • 2.25 MHz Shear Wave Standard Transducers
        • Probe Diameter: 1/2 x 1/2"
        • Probe Characteristic: Standard
        • Part Number : TF2M25EEG-1
      • 2.25 MHz Shear Wave Standard Transducers
        • Probe Diameter: 1/2 x 1"
        • Probe Characteristic: Standard
        • Part Number : TF2M25EHG-1
      • 2.25 MHz Shear Wave Standard Transducers
        • Probe Diameter: 5/8 x 3/4"
        • Probe Characteristic: Standard
        • Part Number : TF2M25GFG-1
      • 2.25 MHz Shear Wave Standard Transducers
        • Probe Diameter: 3/4 x 3/4"
        • Probe Characteristic: Standard
        • Part Number : TF2M25GGG-1
      • 2.25 MHz Shear Wave Standard Transducers
        • Probe Diameter: 1/2 x 1/2"
        • Probe Characteristic: Standard
        • Part Number : TF2M25EEG-2
      • 2.25 MHz Shear Wave Standard Transducers
        • Probe Diameter: 1/2 x 1"
        • Probe Characteristic: Standard
        • Part Number : TF2M25EHG-2
      • 2.25 MHz Shear Wave Standard Transducers
        • Probe Diameter: 5/8 x 5/8"
        • Probe Characteristic: Standard
        • Part Number : TF2M25FFG-2
      • 2.25 MHz Shear Wave Standard Transducers
        • Probe Diameter: 5/8 x 5/8"
        • Probe Characteristic: Standard
        • Part Number : TF2M25FFG-1
      • 2.25 MHz Shear Wave Standard Transducers
        • Probe Diameter: 5/8 x 3/4"
        • Probe Characteristic: Standard
        • Part Number : TF2M25GFG-2
      • 2.25 MHz Shear Wave Standard Transducers
        • Probe Diameter: 3/4 x 3/4"
        • Probe Characteristic: Standard
        • Part Number : TF2M25GGG-2
      • 5.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 1/2 x 1"
        • Probe Characteristic: Standard
        • Part Number : TF5M00EHG-2
      • 2.25 MHz Shear Wave Standard Transducers
        • Probe Diameter: 1/2 x 1/2"
        • Probe Characteristic: Standard
        • Part Number : TF2M25EER-1
      • 2.25 MHz Shear Wave Standard Transducers
        • Probe Diameter: 5/8 x 3/4"
        • Probe Characteristic: Standard
        • Part Number : TF2M25GFR-2
      • 5.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 3/4 x 3/4"
        • Probe Characteristic: Standard
        • Part Number : TF5M00GGG-2
      • 2.25 MHz Shear Wave Standard Transducers
        • Probe Diameter: 3/4 x 3/4"
        • Probe Characteristic: Standard
        • Part Number : TF2M25GGR-2
      • 5.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 1/2 x 1/2"
        • Probe Characteristic: Standard
        • Part Number : TF5M00EER-1
      • 5.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 5/8 x 5/8"
        • Probe Characteristic: Standard
        • Part Number : TF5M00FFG-2
      • 2.25 MHz Shear Wave Standard Transducers
        • Probe Diameter: 1/2 x 1"
        • Probe Characteristic: Standard
        • Part Number : TF2M25EHR-1
      • 2.25 MHz Shear Wave Standard Transducers
        • Probe Diameter: 5/8 x 5/8"
        • Probe Characteristic: Standard
        • Part Number : TF2M25FFR-1
      • 5.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 1/2 x 1"
        • Probe Characteristic: Standard
        • Part Number : TF5M00EEG-1
      • 5.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 1/2 x 1"
        • Probe Characteristic: Standard
        • Part Number : TF5M00EHR-1
      • 5.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 3/4 x 5/8"
        • Probe Characteristic: Standard
        • Part Number : TF5M00GFG-2
      • 2.25 MHz Shear Wave Standard Transducers
        • Probe Diameter: 5/8 x 3/4"
        • Probe Characteristic: Standard
        • Part Number : TF2M25GFR-1
      • 5.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 1/2 x 1"
        • Probe Characteristic: Standard
        • Part Number : TF5M00EHG-1
      • 5.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 5/8 x 5/8"
        • Probe Characteristic: Standard
        • Part Number : TF5M00FFR-1
      • 5.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 3/4 x 5/8"
        • Probe Characteristic: Standard
        • Part Number : TF5M00GFR-1
      • 2.25 MHz Shear Wave Standard Transducers
        • Probe Diameter: 3/4 x 3/4"
        • Probe Characteristic: Standard
        • Part Number : TF2M25GGR-1
      • 5.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 5/8 x 5/8"
        • Probe Characteristic: Standard
        • Part Number : TF5M00FFG-1
      • 5.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 3/4 x 5/8"
        • Probe Characteristic: Standard
        • Part Number : TF5M00GFG-1
      • 5.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 3/4 x 3/4"
        • Probe Characteristic: Standard
        • Part Number : TF5M00GGR-1
      • 2.25 MHz Shear Wave Standard Transducers
        • Probe Diameter: 1/2 x 1/2"
        • Probe Characteristic: Standard
        • Part Number : TF2M25EER-2
      • 2.25 MHz Shear Wave Standard Transducers
        • Probe Diameter: 1/2 x 1"
        • Probe Characteristic: Standard
        • Part Number : TF2M25EHR-2
      • 5.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 3/4 x 3/4"
        • Probe Characteristic: Standard
        • Part Number : TF5M00GGG-1
      • 5.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 1/2 x 1/2"
        • Probe Characteristic: Standard
        • Part Number : TF5M00EER-2
      • 2.25 MHz Shear Wave Standard Transducers
        • Probe Diameter: 5/8 x 5/8"
        • Probe Characteristic: Standard
        • Part Number : TF2M25FFR-2
      • 5.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 1/2 x 1/2"
        • Probe Characteristic: Standard
        • Part Number : TF5M00EEG-2
      • 5.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 1/2 x 1"
        • Probe Characteristic: Standard
        • Part Number : TF5M00EHR-2
      • 5.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 5/8 x 5/8"
        • Probe Characteristic: Standard
        • Part Number : TF5M00FFR-2
      • 5.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 3/4 x 5/8"
        • Probe Characteristic: Standard
        • Part Number : TF5M00GFR-2
      • 5.00 MHz Shear Wave Standard Transducers
        • Probe Diameter: 3/4 x 3/4"
        • Probe Characteristic: Standard
        • Part Number : TF5M00GGR-2
  • Accessories
    • Accessories
      Shear Wave Standard Transducers

      ElcoMaster®

      It’s not all about taking readings, it’s what you do with them that counts - save up to 30% of your working week by producing professional reports in seconds with ElcoMaster® Software.

      • Part Number: TC-24034-1
      • Part Number: TC-24034-2
      • Part Number: TC-24034-3
      • Part Number: TC-24034-9
      • Part Number: TL-24030-1
      • Part Number: TL-24030-2
      • Part Number: TL-24030-3
      • Part Number: TL-24030-5
      • Part Number: TL-24030-6
      • Part Number: TL-24030-7
      • Part Number: TL-24031
      • Part Number: TL-24032
      • Part Number: TD-24033-1
      • Part Number: TD-24033-3
      • Part Number: TD-24033-4
      • Part Number: TD-24033-5
      • Part Number: TD-24033-6
      • Part Number: TD-24033-7
      • Part Number: TD-24033-8
      • Part Number: TZ-24035

Shear Wave Standard Transducers

Standard-Shear-Wave-Transducer

Large single element transducers designed for use with angle beam wedges for a powerful flaw detection solution.

Summary

Shear Wave Standard Transducers

Shear Wave Standard Transducers can be fixed to wedges of different angles to produce shear wave velocity measurements.

When used in conjunction with the ‘Trigonometry’ feature of the gauge, the transducer will produce instrumental flaw detection sound shear waves.

Key Features

Shear Wave Standard Transducers

Shear Wave Standard Transducer Characteristics Explained

High-damped_1

High Damped
Limiting the duration or decreasing the amplitude of vibrations. For use with EE (ThruPaint™) only.

high-resolution_1

High Resolution
Features increased near surface resolution, ideal for use on thin substrates.

Technical Information
Shear Wave Standard Transducers
 
Part Number Probe Diameter Probe Characteristic
Connector Type Suitable for measuring

Damping

Microdot

BNC

Cast Iron

Steel

Common Metals

Rough Surfaces

Castings

Billets

Weld Inspection

1.00 MHz Shear Wave Standard Transducers
TF1M00EE-1 1/2 x 1/2" Composite
S  
 
TF1M00EH-3 1/2 x 1" Composite
S  
 
TF1M00FF-1 5/8 x 5/8" Composite
S  
 
TF1M00GF-1 5/8 x 3/4" Composite
S  
 
TF1M00GG-1 3/4 x 3/4" Composite
S  
 
TF1M00EE-2 1/2 x 1/2" Composite
S
 
 
TF1M00EH-4 1/2 x 1" Composite
S
 
 
TF1M00FF-2 5/8 x 5/8" Composite
S
 
 
TF1M00GF-2 5/8 x 3/4" Composite
S
 
 
TF1M00GG-2 3/4 x 3/4" Composite
S
 
 
2.25 MHz Shear Wave Standard Transducers
TF2M25EEG-1 1/2 x 1/2" Standard
HG  
 
TF2M25EHG-1 1/2 x 1" Standard
HG  
 
TF2M25FFG-1 5/8 x 5/8" Standard
HG  
 
TF2M25GFG-1 5/8 x 3/4" Standard
HG  
 
TF2M25GGG-1 3/4 x 3/4" Standard
HG  
 
TF2M25EEG-2 1/2 x 1/2" Standard
HG
 
 
TF2M25EHG-2 1/2 x 1" Standard
HG
 
 
TF2M25FFG-2 5/8 x 5/8" Standard
HG
 
 
TF2M25GFG-2 5/8 x 3/4" Standard
HG
 
 
 
TF2M25GGG-2 3/4 x 3/4" Standard
HG
 
 
TF2M25EER-1 1/2 x 1/2" Standard
R  
 
TF2M25EHR-1 1/2 x 1" Standard
R  
 
TF2M25FFR-1 5/8 x 5/8" Standard
R  
 
TF2M25GFR-1 5/8 x 3/4" Standard
R  
 
TF2M25GGR-1 3/4 x 3/4" Standard
R  
 
TF2M25EER-2 1/2 x 1/2" Standard
R
 
 
TF2M25EHR-2 1/2 x 1" Standard
R
 
 
TF2M25FFR-2 5/8 x 5/8" Standard
R
 
 
TF2M25GFR-2 5/8 x 3/4" Standard
R
 
 
TF2M25GGR-2 3/4 x 3/4" Standard
R
 
 
5.00 MHz Shear Wave Standard Transducers
TF5M00EEG-1 1/2 x 1" Standard
HG  
 
TF5M00EHG-1 1/2 x 1" Standard
HG  
 
TF5M00FFG-1 5/8 x 5/8" Standard
HG  
 
TF5M00GFG-1 3/4 x 5/8" Standard
HG  
 
TF5M00GGG-1 3/4 x 3/4" Standard
HG  
 
TF5M00EEG-2 1/2 x 1/2" Standard
HG
   
TF5M00EHG-2 1/2 x 1" Standard
HG
   
TF5M00FFG-2 5/8 x 5/8" Standard
HG
   
TF5M00GFG-2 3/4 x 5/8" Standard
HG
   
TF5M00GGG-2 3/4 x 3/4" Standard
HG
   
TF5M00EER-1 1/2 x 1/2" Standard
R  
 
TF5M00EHR-1 1/2 x 1" Standard
R  
 
TF5M00FFR-1 5/8 x 5/8" Standard
R  
 
TF5M00GFR-1 3/4 x 5/8" Standard
R  
 
TF5M00GGR-1 3/4 x 3/4" Standard
R  
 
TF5M00EER-2 1/2 x 1/2" Standard
R
   
TF5M00EHR-2 1/2 x 1" Standard
R
   
TF5M00FFR-2 5/8 x 5/8" Standard
R
   
TF5M00GFR-2 3/4 x 5/8" Standard
R
   
TF5M00GGR-2 3/4 x 3/4" Standard
R
   
1.00 MHz Shear Wave Standard Transducers
Part Number TF1M00EE-1
Probe Diameter 1/2 x 1/2"
Probe Characteristic Composite
Damping S
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF1M00EH-3
Probe Diameter 1/2 x 1"
Probe Characteristic Composite
Damping S
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF1M00FF-1
Probe Diameter 5/8 x 5/8"
Probe Characteristic Composite
Damping S
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF1M00GF-1
Probe Diameter 5/8 x 3/4"
Probe Characteristic Composite
Damping S
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF1M00GG-1
Probe Diameter 3/4 x 3/4"
Probe Characteristic Composite
Damping S
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF1M00EE-2
Probe Diameter 1/2 x 1/2"
Probe Characteristic Composite
Damping S
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF1M00EH-4
Probe Diameter 1/2 x 1"
Probe Characteristic Composite
Damping S
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF1M00FF-2
Probe Diameter 5/8 x 5/8"
Probe Characteristic Composite
Damping S
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF1M00GF-2
Probe Diameter 5/8 x 3/4"
Probe Characteristic Composite
Damping S
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF1M00GG-2
Probe Diameter 3/4 x 3/4"
Probe Characteristic Composite
Damping S
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
2.25 MHz Shear Wave Standard Transducers
Part Number TF2M25EEG-1
Probe Diameter 1/2 x 1/2"
Probe Characteristic Standard
Damping HG
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF2M25EHG-1
Probe Diameter 1/2 x 1"
Probe Characteristic Standard
Damping HG
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF2M25FFG-1
Probe Diameter 5/8 x 5/8"
Probe Characteristic Standard
Damping HG
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF2M25GFG-1
Probe Diameter 5/8 x 3/4"
Probe Characteristic Standard
Damping HG
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF2M25GGG-1
Probe Diameter 3/4 x 3/4"
Probe Characteristic Standard
Damping HG
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF2M25EEG-2
Probe Diameter 1/2 x 1/2"
Probe Characteristic Standard
Damping HG
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF2M25EHG-2
Probe Diameter 1/2 x 1"
Probe Characteristic Standard
Damping HG
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF2M25FFG-2
Probe Diameter 5/8 x 5/8"
Probe Characteristic Standard
Damping HG
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF2M25GFG-2
Probe Diameter 5/8 x 3/4"
Probe Characteristic Standard
Damping HG
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection  
Part Number TF2M25GGG-2
Probe Diameter 3/4 x 3/4"
Probe Characteristic Standard
Damping HG
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF2M25EER-1
Probe Diameter 1/2 x 1/2"
Probe Characteristic Standard
Damping R
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF2M25EHR-1
Probe Diameter 1/2 x 1"
Probe Characteristic Standard
Damping R
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF2M25FFR-1
Probe Diameter 5/8 x 5/8"
Probe Characteristic Standard
Damping R
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF2M25GFR-1
Probe Diameter 5/8 x 3/4"
Probe Characteristic Standard
Damping R
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF2M25GGR-1
Probe Diameter 3/4 x 3/4"
Probe Characteristic Standard
Damping R
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF2M25EER-2
Probe Diameter 1/2 x 1/2"
Probe Characteristic Standard
Damping R
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF2M25EHR-2
Probe Diameter 1/2 x 1"
Probe Characteristic Standard
Damping R
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF2M25FFR-2
Probe Diameter 5/8 x 5/8"
Probe Characteristic Standard
Damping R
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF2M25GFR-2
Probe Diameter 5/8 x 3/4"
Probe Characteristic Standard
Damping R
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF2M25GGR-2
Probe Diameter 3/4 x 3/4"
Probe Characteristic Standard
Damping R
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron
Steel
Common Metals  
Rough Surfaces
Castings
Billets
Weld Inspection
5.00 MHz Shear Wave Standard Transducers
Part Number TF5M00EEG-1
Probe Diameter 1/2 x 1"
Probe Characteristic Standard
Damping HG
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron  
Steel
Common Metals
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF5M00EHG-1
Probe Diameter 1/2 x 1"
Probe Characteristic Standard
Damping HG
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron  
Steel
Common Metals
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF5M00FFG-1
Probe Diameter 5/8 x 5/8"
Probe Characteristic Standard
Damping HG
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron  
Steel
Common Metals
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF5M00GFG-1
Probe Diameter 3/4 x 5/8"
Probe Characteristic Standard
Damping HG
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron  
Steel
Common Metals
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF5M00GGG-1
Probe Diameter 3/4 x 3/4"
Probe Characteristic Standard
Damping HG
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron  
Steel
Common Metals
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF5M00EEG-2
Probe Diameter 1/2 x 1/2"
Probe Characteristic Standard
Damping HG
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron  
Steel
Common Metals
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF5M00EHG-2
Probe Diameter 1/2 x 1"
Probe Characteristic Standard
Damping HG
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron  
Steel
Common Metals
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF5M00FFG-2
Probe Diameter 5/8 x 5/8"
Probe Characteristic Standard
Damping HG
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron  
Steel
Common Metals
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF5M00GFG-2
Probe Diameter 3/4 x 5/8"
Probe Characteristic Standard
Damping HG
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron  
Steel
Common Metals
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF5M00GGG-2
Probe Diameter 3/4 x 3/4"
Probe Characteristic Standard
Damping HG
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron  
Steel
Common Metals
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF5M00EER-1
Probe Diameter 1/2 x 1/2"
Probe Characteristic Standard
Damping R
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron  
Steel
Common Metals
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF5M00EHR-1
Probe Diameter 1/2 x 1"
Probe Characteristic Standard
Damping R
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron  
Steel
Common Metals
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF5M00FFR-1
Probe Diameter 5/8 x 5/8"
Probe Characteristic Standard
Damping R
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron  
Steel
Common Metals
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF5M00GFR-1
Probe Diameter 3/4 x 5/8"
Probe Characteristic Standard
Damping R
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron  
Steel
Common Metals
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF5M00GGR-1
Probe Diameter 3/4 x 3/4"
Probe Characteristic Standard
Damping R
Connector Type
Microdot  
BNC
Suitable for measuring
Cast Iron  
Steel
Common Metals
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF5M00EER-2
Probe Diameter 1/2 x 1/2"
Probe Characteristic Standard
Damping R
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron  
Steel
Common Metals
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF5M00EHR-2
Probe Diameter 1/2 x 1"
Probe Characteristic Standard
Damping R
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron  
Steel
Common Metals
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF5M00FFR-2
Probe Diameter 5/8 x 5/8"
Probe Characteristic Standard
Damping R
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron  
Steel
Common Metals
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF5M00GFR-2
Probe Diameter 3/4 x 5/8"
Probe Characteristic Standard
Damping R
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron  
Steel
Common Metals
Rough Surfaces
Castings
Billets
Weld Inspection
Part Number TF5M00GGR-2
Probe Diameter 3/4 x 3/4"
Probe Characteristic Standard
Damping R
Connector Type
Microdot
BNC  
Suitable for measuring
Cast Iron  
Steel
Common Metals
Rough Surfaces
Castings
Billets
Weld Inspection
S - Standard Undamped Transducer
HG - High Gain Damping Transducers
R - Resolution Transducer
Part Numbers
Shear Wave Standard Transducers
  • 1.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 1/2 x 1/2"
    • Probe Characteristic: Composite
    • Part Number : TF1M00EE-1
  • 1.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 1/2 x 1"
    • Probe Characteristic: Composite
    • Part Number : TF1M00EH-3
  • 1.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 5/8 x 5/8"
    • Probe Characteristic: Composite
    • Part Number : TF1M00FF-1
  • 1.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 5/8 x 3/4"
    • Probe Characteristic: Composite
    • Part Number : TF1M00GF-1
  • 1.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 3/4 x 3/4"
    • Probe Characteristic: Composite
    • Part Number : TF1M00GG-1
  • 1.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 1/2 x 1/2"
    • Probe Characteristic: Composite
    • Part Number : TF1M00EE-2
  • 1.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 1/2 x 1"
    • Probe Characteristic: Composite
    • Part Number : TF1M00EH-4
  • 1.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 5/8 x 5/8"
    • Probe Characteristic: Composite
    • Part Number : TF1M00FF-2
  • 1.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 5/8 x 3/4"
    • Probe Characteristic: Composite
    • Part Number : TF1M00GF-2
  • 1.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 3/4 x 3/4"
    • Probe Characteristic: Composite
    • Part Number : TF1M00GG-2
  • 2.25 MHz Shear Wave Standard Transducers
    • Probe Diameter: 1/2 x 1/2"
    • Probe Characteristic: Standard
    • Part Number : TF2M25EEG-1
  • 2.25 MHz Shear Wave Standard Transducers
    • Probe Diameter: 1/2 x 1"
    • Probe Characteristic: Standard
    • Part Number : TF2M25EHG-1
  • 2.25 MHz Shear Wave Standard Transducers
    • Probe Diameter: 5/8 x 3/4"
    • Probe Characteristic: Standard
    • Part Number : TF2M25GFG-1
  • 2.25 MHz Shear Wave Standard Transducers
    • Probe Diameter: 3/4 x 3/4"
    • Probe Characteristic: Standard
    • Part Number : TF2M25GGG-1
  • 2.25 MHz Shear Wave Standard Transducers
    • Probe Diameter: 1/2 x 1/2"
    • Probe Characteristic: Standard
    • Part Number : TF2M25EEG-2
  • 2.25 MHz Shear Wave Standard Transducers
    • Probe Diameter: 1/2 x 1"
    • Probe Characteristic: Standard
    • Part Number : TF2M25EHG-2
  • 2.25 MHz Shear Wave Standard Transducers
    • Probe Diameter: 5/8 x 5/8"
    • Probe Characteristic: Standard
    • Part Number : TF2M25FFG-2
  • 2.25 MHz Shear Wave Standard Transducers
    • Probe Diameter: 5/8 x 5/8"
    • Probe Characteristic: Standard
    • Part Number : TF2M25FFG-1
  • 2.25 MHz Shear Wave Standard Transducers
    • Probe Diameter: 5/8 x 3/4"
    • Probe Characteristic: Standard
    • Part Number : TF2M25GFG-2
  • 2.25 MHz Shear Wave Standard Transducers
    • Probe Diameter: 3/4 x 3/4"
    • Probe Characteristic: Standard
    • Part Number : TF2M25GGG-2
  • 5.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 1/2 x 1"
    • Probe Characteristic: Standard
    • Part Number : TF5M00EHG-2
  • 2.25 MHz Shear Wave Standard Transducers
    • Probe Diameter: 1/2 x 1/2"
    • Probe Characteristic: Standard
    • Part Number : TF2M25EER-1
  • 2.25 MHz Shear Wave Standard Transducers
    • Probe Diameter: 5/8 x 3/4"
    • Probe Characteristic: Standard
    • Part Number : TF2M25GFR-2
  • 5.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 3/4 x 3/4"
    • Probe Characteristic: Standard
    • Part Number : TF5M00GGG-2
  • 2.25 MHz Shear Wave Standard Transducers
    • Probe Diameter: 3/4 x 3/4"
    • Probe Characteristic: Standard
    • Part Number : TF2M25GGR-2
  • 5.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 1/2 x 1/2"
    • Probe Characteristic: Standard
    • Part Number : TF5M00EER-1
  • 5.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 5/8 x 5/8"
    • Probe Characteristic: Standard
    • Part Number : TF5M00FFG-2
  • 2.25 MHz Shear Wave Standard Transducers
    • Probe Diameter: 1/2 x 1"
    • Probe Characteristic: Standard
    • Part Number : TF2M25EHR-1
  • 2.25 MHz Shear Wave Standard Transducers
    • Probe Diameter: 5/8 x 5/8"
    • Probe Characteristic: Standard
    • Part Number : TF2M25FFR-1
  • 5.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 1/2 x 1"
    • Probe Characteristic: Standard
    • Part Number : TF5M00EEG-1
  • 5.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 1/2 x 1"
    • Probe Characteristic: Standard
    • Part Number : TF5M00EHR-1
  • 5.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 3/4 x 5/8"
    • Probe Characteristic: Standard
    • Part Number : TF5M00GFG-2
  • 2.25 MHz Shear Wave Standard Transducers
    • Probe Diameter: 5/8 x 3/4"
    • Probe Characteristic: Standard
    • Part Number : TF2M25GFR-1
  • 5.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 1/2 x 1"
    • Probe Characteristic: Standard
    • Part Number : TF5M00EHG-1
  • 5.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 5/8 x 5/8"
    • Probe Characteristic: Standard
    • Part Number : TF5M00FFR-1
  • 5.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 3/4 x 5/8"
    • Probe Characteristic: Standard
    • Part Number : TF5M00GFR-1
  • 2.25 MHz Shear Wave Standard Transducers
    • Probe Diameter: 3/4 x 3/4"
    • Probe Characteristic: Standard
    • Part Number : TF2M25GGR-1
  • 5.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 5/8 x 5/8"
    • Probe Characteristic: Standard
    • Part Number : TF5M00FFG-1
  • 5.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 3/4 x 5/8"
    • Probe Characteristic: Standard
    • Part Number : TF5M00GFG-1
  • 5.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 3/4 x 3/4"
    • Probe Characteristic: Standard
    • Part Number : TF5M00GGR-1
  • 2.25 MHz Shear Wave Standard Transducers
    • Probe Diameter: 1/2 x 1/2"
    • Probe Characteristic: Standard
    • Part Number : TF2M25EER-2
  • 2.25 MHz Shear Wave Standard Transducers
    • Probe Diameter: 1/2 x 1"
    • Probe Characteristic: Standard
    • Part Number : TF2M25EHR-2
  • 5.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 3/4 x 3/4"
    • Probe Characteristic: Standard
    • Part Number : TF5M00GGG-1
  • 5.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 1/2 x 1/2"
    • Probe Characteristic: Standard
    • Part Number : TF5M00EER-2
  • 2.25 MHz Shear Wave Standard Transducers
    • Probe Diameter: 5/8 x 5/8"
    • Probe Characteristic: Standard
    • Part Number : TF2M25FFR-2
  • 5.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 1/2 x 1/2"
    • Probe Characteristic: Standard
    • Part Number : TF5M00EEG-2
  • 5.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 1/2 x 1"
    • Probe Characteristic: Standard
    • Part Number : TF5M00EHR-2
  • 5.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 5/8 x 5/8"
    • Probe Characteristic: Standard
    • Part Number : TF5M00FFR-2
  • 5.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 3/4 x 5/8"
    • Probe Characteristic: Standard
    • Part Number : TF5M00GFR-2
  • 5.00 MHz Shear Wave Standard Transducers
    • Probe Diameter: 3/4 x 3/4"
    • Probe Characteristic: Standard
    • Part Number : TF5M00GGR-2
   
Accessories
Shear Wave Standard Transducers

ElcoMaster®

It’s not all about taking readings, it’s what you do with them that counts - save up to 30% of your working week by producing professional reports in seconds with ElcoMaster® Software.

  • Part Number: TC-24034-1
  • Part Number: TC-24034-2
  • Part Number: TC-24034-3
  • Part Number: TC-24034-9
  • Part Number: TL-24030-1
  • Part Number: TL-24030-2
  • Part Number: TL-24030-3
  • Part Number: TL-24030-5
  • Part Number: TL-24030-6
  • Part Number: TL-24030-7
  • Part Number: TL-24031
  • Part Number: TL-24032
  • Part Number: TD-24033-1
  • Part Number: TD-24033-3
  • Part Number: TD-24033-4
  • Part Number: TD-24033-5
  • Part Number: TD-24033-6
  • Part Number: TD-24033-7
  • Part Number: TD-24033-8
  • Part Number: TZ-24035