

Sagola D1-40 Double Diaphragm Pneumatic Pump


The Sagola D1-40 Double Diaphragm Pneumatic Pump is ideal for high production industries.
- 要約
-
要約
-
- 40 litre double diaphragm pump.
- Spraying equipment for high production industries.
- Can be used with several guns.
- Double outlet version to work with two guns.
- Special version for abrasive products.
- 1:1 Ratio.
Compliance: ATEX 2 II GX, UNE-EN-13463-1:2011, UNE-EN ISO 12100:2012, EN 809, EN12621, EN12162, EN 1127-1
-
- 特長
-
特長
Sagola D1-40 Double Diaphragm Pneumatic Pump
Components
1. Suction Hose
2. 5 litre (35.2fl oz) Product tank
3. Product inlet
4. Product outlet
5. Air pressure regulator (equipment)
6. Air pressure regulator (spray gun)
7. Antipulsation filter
8. Product pressure regulator
9. Pressure gauge (equipment)
10. Pressure gauge (spray gun)
11. Earth lead
12. Air inlet to the equipment
13. Transport carriage
14. Wall mount
-
- 仕様
-
仕様Sagola D1-40 Double Diaphragm Pneumatic Pump
Pressure ratio 1:1 Max. air consumption (60 cycles/min.) 580LPM (20 CFM) Maximum air inlet pressure 7bar (102psi) Min. inlet hose diameter Ø 6mm (1/4”) Lubricant SAE 10 Max. product output pressure 7bar (102psi) Flow Rate @ 60 cycles/min (Free Flow) 40LPM (1.41CFM) Air inlet Female 1/4" GAS BSP Product outlet Male 3/8" BSP Weight (including Frame or Trolley Mounted with Product Regulator) With Suction Pole: 18.5kg (40.79lbs), With Product Tank: 18kg (39.68lb) Dimensions (including Frame or Trolley Mounted with Product Regulator) With Suction Pole: 465 x 501 x 953mm (18.31 x 19.72 x 37.52"), With Product Tank: 639 x 511 x 953mm (25.16 x 20.12 x 37.52") 内用品 Elcometer D1-40 Low Pressure Air Spray Double Diaphragm Transfer Pump
-
- ダウンロード
-
- コード番号
-
コード番号Sagola D1-40 Double Diaphragm Pneumatic PumpNo data found!!
-
Elcometer D1-40 (Trolley and Suction Probe)
- コード番号 : PSD140AS-CSR
-
Elcometer D1-40 (Trolley and 5L (35.2fl oz) Gravity Pot)
- コード番号 : PSD140AS-CTR
-
Elcometer D1-40 (Trolley and Suction Probe) For Abrasive Products
- コード番号 : PSD140AS-CAR
-
Elcometer D1-40 (Trolley and Suction Probe) With Double Outlet Product
- コード番号 : PSD140AS-CDR
-
Elcometer D1-40 (Wall Support and Suction Probe)
- コード番号 : PSD140AS-WSR
-
Elcometer D1-40 (Wall Support and Gravity Deposit)
- コード番号 : PSD140AS-WTR
-
Elcometer D1-40 Full Equipment Kit
- コード番号 : PSD140AS-CSRK
- アクセサリー
-
アクセサリーSagola D1-40 Double Diaphragm Pneumatic Pump
- コード番号PT56414130
- コード番号PT56414039
- コード番号PT56414044
- コード番号PT56414040
- コード番号PT56414041
- コード番号PT56414042
- コード番号PT52410019
- コード番号PT30090091
- コード番号PT83660030
- コード番号PT83660029
- コード番号PT54550016
- コード番号PT49000478
- コード番号PT83660047
- コード番号PT56418583
-
- Home
- スプレー機器
- Refinishing & Bodyshop Spray Equipment
- Fluid Application
- Double Membrane Pneumatic Pumps
- Sagola D1-40 Double Diaphragm Pneumatic Pump
Sagola D1-40 Double Diaphragm Pneumatic Pump
The Sagola D1-40 Double Diaphragm Pneumatic Pump is ideal for high production industries.
要約
Sagola D1-40 Double Diaphragm Pneumatic Pump
- 40 litre double diaphragm pump.
- Spraying equipment for high production industries.
- Can be used with several guns.
- Double outlet version to work with two guns.
- Special version for abrasive products.
- 1:1 Ratio.
Compliance: ATEX 2 II GX, UNE-EN-13463-1:2011, UNE-EN ISO 12100:2012, EN 809, EN12621, EN12162, EN 1127-1
特長
Sagola D1-40 Double Diaphragm Pneumatic Pump
Components
1. Suction Hose
2. 5 litre (35.2fl oz) Product tank
3. Product inlet
4. Product outlet
5. Air pressure regulator (equipment)
6. Air pressure regulator (spray gun)
7. Antipulsation filter
8. Product pressure regulator
9. Pressure gauge (equipment)
10. Pressure gauge (spray gun)
11. Earth lead
12. Air inlet to the equipment
13. Transport carriage
14. Wall mount
仕様Sagola D1-40 Double Diaphragm Pneumatic PumpPressure ratio 1:1 Max. air consumption (60 cycles/min.) 580LPM (20 CFM) Maximum air inlet pressure 7bar (102psi) Min. inlet hose diameter Ø 6mm (1/4”) Lubricant SAE 10 Max. product output pressure 7bar (102psi) Flow Rate @ 60 cycles/min (Free Flow) 40LPM (1.41CFM) Air inlet Female 1/4" GAS BSP Product outlet Male 3/8" BSP Weight (including Frame or Trolley Mounted with Product Regulator) With Suction Pole: 18.5kg (40.79lbs), With Product Tank: 18kg (39.68lb) Dimensions (including Frame or Trolley Mounted with Product Regulator) With Suction Pole: 465 x 501 x 953mm (18.31 x 19.72 x 37.52"), With Product Tank: 639 x 511 x 953mm (25.16 x 20.12 x 37.52") 内用品 Elcometer D1-40 Low Pressure Air Spray Double Diaphragm Transfer Pump コード番号Sagola D1-40 Double Diaphragm Pneumatic PumpNo data found!!-
Elcometer D1-40 (Trolley and Suction Probe)
- コード番号 : PSD140AS-CSR
-
Elcometer D1-40 (Trolley and 5L (35.2fl oz) Gravity Pot)
- コード番号 : PSD140AS-CTR
-
Elcometer D1-40 (Trolley and Suction Probe) For Abrasive Products
- コード番号 : PSD140AS-CAR
-
Elcometer D1-40 (Trolley and Suction Probe) With Double Outlet Product
- コード番号 : PSD140AS-CDR
-
Elcometer D1-40 (Wall Support and Suction Probe)
- コード番号 : PSD140AS-WSR
-
Elcometer D1-40 (Wall Support and Gravity Deposit)
- コード番号 : PSD140AS-WTR
-
Elcometer D1-40 Full Equipment Kit
- コード番号 : PSD140AS-CSRK
アクセサリーSagola D1-40 Double Diaphragm Pneumatic Pump- コード番号: PT56414130
- コード番号: PT56414039
- コード番号: PT56414044
- コード番号: PT56414040
- コード番号: PT56414041
- コード番号: PT56414042
- コード番号: PT52410019
- コード番号: PT30090091
- コード番号: PT83660030
- コード番号: PT83660029
- コード番号: PT54550016
- コード番号: PT49000478
- コード番号: PT83660047
- コード番号: PT56418583
- コード番号
-