製品説明
仕様
アクセサリー
データシート
ビデオ

Elcometer 106/6コンクリート面付着性試験機

コンクリートに塗布された膜の付着性を調べるために特に設計された試験機で す。


通常のElcometer 106とよく似た方法で使用しますが、直径50mm(2インチ)の ドリーを装着します。


ケースに入れて手軽に持ち運べるので、現場での試験に最適です。

Elcometer 106/6コンクリート面付着性試験機
Elcometer 106/6コンクリート面付着性試験機Elcometer 106/6コンクリート面付着性試験機Elcometer 106/6コンクリート面付着性試験機

仕様

コード番号 コード番号 証明書
F106----6  Elcometer 106コンクリート面付着性試験機 - スケール6 ο
測定範囲 0 - 3.5MPa (N/mm2) 0 - 500psi  
本体寸法 505 x 370 x 120mm (19.9 x 14.6 x 4.7インチ)  
キット総重量 5.7kg (12.6ポンド)  
内用品 Elcometer 106/6コンクリート面付着性試験機、直径50mm(2インチ)のドリー5個、サポートリング、 アラルダイト接着剤、ラチェットスパナ、収納ケース、取扱説明書  

 

適合規格:
ASTM D 7234, BS 1881-207, DIN 1048-2, EN 1542, EN 12636

ο 校正証明書(オプション)

 

アクセサリー

T10618570 交換用ドリー、直径50mm(2インチ)、5個入り
T99912906

アラルライドスタンダード(2液混合タイプのエポキシ接着剤)、15ml入りチューブ2本

KT001910P122 直径50mm(2インチ)のドリー用円形カッター

ビデオ

1. An Introduction to Pull-Off Adhesion on Coated Surfaces

Adhesion testers are used to test how well a coating has adhered to a surface, as poor adhesion can lead to premature coating failures. The coating inspector has essentially three main methods to choose from - cross hatch, push off, and the most common, the pull-off adhesion test.

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

ビデオ

1. An Introduction to Pull-Off Adhesion on Coated Surfaces
1. An Introduction to Pull-Off Adhesion on Coated Surfaces

Adhesion testers are used to test how well a coating has adhered to a surface, as poor adhesion can lead to premature coating failures. The coating inspector has essentially three main methods to choose from - cross hatch, push off, and the most common, the pull-off adhesion test.

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

//www.youtube.com/embed/rBTGaP-OXLM
2. Selecting the Dolly Diameter and Gauge
2. Selecting the Dolly Diameter and Gauge

When it comes to selecting the dolly diameter and adhesion gauge type to use for a pull-off adhesion test; factors such as the substrate material, the substrate shape, and the expected coating strength will affect the dolly or gauge the user chooses.

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

//www.youtube.com/embed/NskjSM8n5UY
3. Selecting the most Appropriate Position for an Adhesion Test
3. Selecting the most Appropriate Position for an Adhesion Test

When preparing a pull-off adhesion test, whilst the actual location and the number of pulls is typically defined by the test method or procedure that’s being followed, the actual positioning of the dolly is vital, as poor positions can result in low pull-off values or invalid tests.


 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here. 

To download the video script in English click here.

 

//www.youtube.com/embed/7xmYIfozQaw
4. Preparing the Dolly and the Coating
4. Preparing the Dolly and the Coating

Properly preparing the dolly and the surface before performing a pull-off adhesion test will help achieve higher pull-off values.

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

 

//www.youtube.com/embed/-26j4aoiFe8
5. To Cut or Not to Cut?
5. To Cut or Not to Cut?

Should the coating around a dolly be cut, or left uncut prior to a pull-off adhesion test; and whose decision is it to make?

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

//www.youtube.com/embed/ZqSNwQSOPqA
6. The Pull-Off Test
6. The Pull-Off Test

Once the glue between a properly prepared dolly or pull stub and a properly prepared coating has fully cured, the pull-off adhesion test can be undertaken using the adhesion tester of choice.

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

 

//www.youtube.com/embed/4rjUgA2Lwos
7. Assessing the Result; Glue, Adhesive and Cohesive Failures
7. Assessing the Result; Glue, Adhesive and Cohesive Failures

Once the pull-off adhesion test has been completed the tensile pull-off force, whether the coating was coat or not, the dolly size and gauge type, and the failure mode of the coating are all recorded; with the nature of the failure usually recorded as an estimated percentage to the nearest 10%.

 

This video is part of a series on Pull-Off Adhension Testing, to view the playlist please click here.


To download the video script in English click here.

//www.youtube.com/embed/TuFY8_KI9lQ
<P> 8. Measuring the Pull-Off Adhesion of Coatings on Concrete</P>

 8. Measuring the Pull-Off Adhesion of Coatings on Concrete

Testing coating adhesion on concrete substrates using a pull-off adhesion gauge is similar to testing coatings on metal substrates. However, there are a number of differences in the test procedures and equipment used.


This video is part of a series on Pull-Off Adhension Testing, to view the series playlist please click here.


To download the video in script in English click here.

//www.youtube.com/embed/O0wMikGLi84