Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System
Ideal for use in situations when dust control is needed, this abrasive blast nozzle mixes water with the abrasive, reducing the amount of dust displaced into the atmosphere.
- Sommario
-
Sommario
-
Featuring an aluminium jacket which provides strength and endurance, this abrasive blast nozzle is recommended for use with harder abrasives. The abrasive blast nozzles are supplied with a rubber gasket.
-
- Dati tecnici
-
Specifiche TecnicheTungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System
Codice articolo Blast Nozzle Nozzle No. Blast Orifice Diameter Blast Nozzle Length Blast Nozzle Entry Diameter MT28326-3* #3 4.8mm (0.19") Water Jet #3 25mm (1") MT28326-4* #4 6.35mm (0.25") Water Jet #4 25mm (1") MT28326-5* #5 8mm (0.31") Water Jet #5 25mm (1") MT28326-6* #6 9.5mm (0.38") Water Jet #6 25mm (1") MT28326-7* #7 11mm (0.44") Water Jet #7 25mm (1") MT28326-8* #8 12.5mm (0.5") Water Jet #8 25mm (1") Codice articolo MT28326-3* Blast Nozzle Nozzle No. #3 Blast Orifice Diameter 4.8mm (0.19") Blast Nozzle Length Water Jet #3 Blast Nozzle Entry Diameter 25mm (1") Codice articolo MT28326-4* Blast Nozzle Nozzle No. #4 Blast Orifice Diameter 6.35mm (0.25") Blast Nozzle Length Water Jet #4 Blast Nozzle Entry Diameter 25mm (1") Codice articolo MT28326-5* Blast Nozzle Nozzle No. #5 Blast Orifice Diameter 8mm (0.31") Blast Nozzle Length Water Jet #5 Blast Nozzle Entry Diameter 25mm (1") Codice articolo MT28326-6* Blast Nozzle Nozzle No. #6 Blast Orifice Diameter 9.5mm (0.38") Blast Nozzle Length Water Jet #6 Blast Nozzle Entry Diameter 25mm (1") Codice articolo MT28326-7* Blast Nozzle Nozzle No. #7 Blast Orifice Diameter 11mm (0.44") Blast Nozzle Length Water Jet #7 Blast Nozzle Entry Diameter 25mm (1") Codice articolo MT28326-8* Blast Nozzle Nozzle No. #8 Blast Orifice Diameter 12.5mm (0.5") Blast Nozzle Length Water Jet #8 Blast Nozzle Entry Diameter 25mm (1") * For 2" Contractor Thread variants, replace the asterisk in part numbers with a 'C'
For 1¼" NPSM Thread variants, replace the asterisk in part numbers with an 'N'
-
- Codice articolo
-
Codice articoloTungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.3- Codice articolo : MT28326-3*
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.4- Codice articolo : MT28326-4*
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.5- Codice articolo : MT28326-5*
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.6- Codice articolo : MT28326-6*
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.7- Codice articolo : MT28326-7*
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.8- Codice articolo : MT28326-8*
-
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System
Ideal for use in situations when dust control is needed, this abrasive blast nozzle mixes water with the abrasive, reducing the amount of dust displaced into the atmosphere.
Sommario
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System
Featuring an aluminium jacket which provides strength and endurance, this abrasive blast nozzle is recommended for use with harder abrasives. The abrasive blast nozzles are supplied with a rubber gasket.
Specifiche Tecniche
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System
| Codice articolo | Blast Nozzle Nozzle No. | Blast Orifice Diameter | Blast Nozzle Length | Blast Nozzle Entry Diameter |
| MT28326-3* | #3 | 4.8mm (0.19") | Water Jet #3 | 25mm (1") |
| MT28326-4* | #4 | 6.35mm (0.25") | Water Jet #4 | 25mm (1") |
| MT28326-5* | #5 | 8mm (0.31") | Water Jet #5 | 25mm (1") |
| MT28326-6* | #6 | 9.5mm (0.38") | Water Jet #6 | 25mm (1") |
| MT28326-7* | #7 | 11mm (0.44") | Water Jet #7 | 25mm (1") |
| MT28326-8* | #8 | 12.5mm (0.5") | Water Jet #8 | 25mm (1") |
| Codice articolo | MT28326-3* |
| Blast Nozzle Nozzle No. | #3 |
| Blast Orifice Diameter | 4.8mm (0.19") |
| Blast Nozzle Length | Water Jet #3 |
| Blast Nozzle Entry Diameter | 25mm (1") |
| Codice articolo | MT28326-4* |
| Blast Nozzle Nozzle No. | #4 |
| Blast Orifice Diameter | 6.35mm (0.25") |
| Blast Nozzle Length | Water Jet #4 |
| Blast Nozzle Entry Diameter | 25mm (1") |
| Codice articolo | MT28326-5* |
| Blast Nozzle Nozzle No. | #5 |
| Blast Orifice Diameter | 8mm (0.31") |
| Blast Nozzle Length | Water Jet #5 |
| Blast Nozzle Entry Diameter | 25mm (1") |
| Codice articolo | MT28326-6* |
| Blast Nozzle Nozzle No. | #6 |
| Blast Orifice Diameter | 9.5mm (0.38") |
| Blast Nozzle Length | Water Jet #6 |
| Blast Nozzle Entry Diameter | 25mm (1") |
| Codice articolo | MT28326-7* |
| Blast Nozzle Nozzle No. | #7 |
| Blast Orifice Diameter | 11mm (0.44") |
| Blast Nozzle Length | Water Jet #7 |
| Blast Nozzle Entry Diameter | 25mm (1") |
| Codice articolo | MT28326-8* |
| Blast Nozzle Nozzle No. | #8 |
| Blast Orifice Diameter | 12.5mm (0.5") |
| Blast Nozzle Length | Water Jet #8 |
| Blast Nozzle Entry Diameter | 25mm (1") |
* For 2" Contractor Thread variants, replace the asterisk in part numbers with a 'C'
For 1¼" NPSM Thread variants, replace the asterisk in part numbers with an 'N'
For 1¼" NPSM Thread variants, replace the asterisk in part numbers with an 'N'
Codice articolo
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.3
- Blast 2" Contractor Thread Part Number: MT28326-3C
- Blast 1¼" NPSM Thread Part Number: MT28326-3N
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.4
- Blast 2" Contractor Thread Part Number: MT28326-4C
- Blast 1¼" NPSM Thread Part Number: MT28326-4N
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.5
- Blast 2" Contractor Thread Part Number: MT28326-5C
- Blast 1¼" NPSM Thread Part Number: MT28326-5N
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.6
- Blast 2" Contractor Thread Part Number: MT28326-6C
- Blast 1¼" NPSM Thread Part Number: MT28326-6N
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.7
- Blast 2" Contractor Thread Part Number: MT28326-7C
- Blast 1¼" NPSM Thread Part Number: MT28326-7N
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.8
- Blast 2" Contractor Thread Part Number: MT28326-8C
- Blast 1¼" NPSM Thread Part Number: MT28326-8N