Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
AThe Elcometer 40 Double Diaphragm Pneumatic Pump is ideal for high production industries.
- Sommario
-
Sommario
-
- 40 litre double diaphragm pump.
- Spraying equipment for high production industries.
- Can be used with several guns.
- Double outlet version to work with two guns.
- Special version for abrasive products.
- 1:1 Ratio.
Compliance: ATEX 2 II GX, UNE-EN-13463-1:2011, UNE-EN ISO 12100:2012, EN 809, EN12621, EN12162, EN 1127-1
-
- Caratteristiche principali
-
Caratteristiche principali
Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
Components
1. Suction Hose
2. 5 litre (35.2fl oz) Product tank
3. Product inlet
4. Product outlet
5. Air pressure regulator (equipment)
6. Air pressure regulator (spray gun)
7. Antipulsation filter
8. Product pressure regulator
9. Pressure gauge (equipment)
10. Pressure gauge (spray gun)
11. Earth lead
12. Air inlet to the equipment
13. Transport carriage
14. Wall mount
Pressure Ratio 1:1 Max. Air Consumption (60 cycles/min.) 580LPM (20CFM) Maximum Air Inlet Pressure 7bar (102psi) Min. Inlet Hose Diameter Ø 6mm (1/4”) Lubricant SAE 10 Max. Product Output Pressure 7bar (102psi) Flow Rate @ 60 cycles/min (Free Flow) 40LPM (1.41CFM) Air Inlet F 1/4" GAS BSP Product Outlet Male 3/8" BSP Weight (including Frame or Trolley Mounted with Product Regulator) With Suction Hose: 18.5kg (40.79lbs)
With Product Tank: 18kg (39.68lb)Dimensions (including Frame or Trolley Mounted with Product Regulator) With Suction Hose: 465 x 501 x 953mm (18.31 x 19.72 x 37.52")
With Product Tank: 639 x 511 x 953mm (25.16 x 20.12 x 37.52")Packing List Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
-
- Dati tecnici
-
Specifiche TecnicheElcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
-
- Codice articolo
-
Codice articoloElcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
-
Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials- Codice articolo : PTD140AAS
- Accessori
-
AccessoriElcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
Codice articoloPT56418708
Codice articoloPT56414128
Codice articoloPT56414039
Codice articoloPT56414044
Codice articoloPT56414040
Codice articoloPT56414041
Codice articoloPT56414042
Codice articoloPT52410019
Codice articoloPT30090091
Codice articoloPT83660030
Codice articoloPT83660029
Codice articoloPT54550016
Codice articoloPT49000478
Codice articoloPT83660047
Codice articoloPT56418583
-
-
Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
AThe Elcometer 40 Double Diaphragm Pneumatic Pump is ideal for high production industries.
Sommario
Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
- 40 litre double diaphragm pump.
- Spraying equipment for high production industries.
- Can be used with several guns.
- Double outlet version to work with two guns.
- Special version for abrasive products.
- 1:1 Ratio.
Compliance: ATEX 2 II GX, UNE-EN-13463-1:2011, UNE-EN ISO 12100:2012, EN 809, EN12621, EN12162, EN 1127-1
Caratteristiche principali
Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
Components
1. Suction Hose
2. 5 litre (35.2fl oz) Product tank
3. Product inlet
4. Product outlet
5. Air pressure regulator (equipment)
6. Air pressure regulator (spray gun)
7. Antipulsation filter
8. Product pressure regulator
9. Pressure gauge (equipment)
10. Pressure gauge (spray gun)
11. Earth lead
12. Air inlet to the equipment
13. Transport carriage
14. Wall mount
| Pressure Ratio | 1:1 |
| Max. Air Consumption (60 cycles/min.) | 580LPM (20CFM) |
| Maximum Air Inlet Pressure | 7bar (102psi) |
| Min. Inlet Hose Diameter Ø | 6mm (1/4”) |
| Lubricant | SAE 10 |
| Max. Product Output Pressure | 7bar (102psi) |
| Flow Rate @ 60 cycles/min (Free Flow) | 40LPM (1.41CFM) |
| Air Inlet | F 1/4" GAS BSP |
| Product Outlet | Male 3/8" BSP |
| Weight (including Frame or Trolley Mounted with Product Regulator) | With Suction Hose: 18.5kg (40.79lbs) With Product Tank: 18kg (39.68lb) |
| Dimensions (including Frame or Trolley Mounted with Product Regulator) | With Suction Hose: 465 x 501 x 953mm (18.31 x 19.72 x 37.52") With Product Tank: 639 x 511 x 953mm (25.16 x 20.12 x 37.52") |
| Packing List | Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials |
Specifiche Tecniche
Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
Codice articolo
Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
-
Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
- Codice articolo : PTD140AAS
Accessori
Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
-
Codice articolo: PT56418708
-
Codice articolo: PT56414128
-
Codice articolo: PT56414039
-
Codice articolo: PT56414044
-
Codice articolo: PT56414040
-
Codice articolo: PT56414041
-
Codice articolo: PT56414042
-
Codice articolo: PT52410019
-
Codice articolo: PT30090091
-
Codice articolo: PT83660030
-
Codice articolo: PT83660029
-
Codice articolo: PT54550016
-
Codice articolo: PT49000478
-
Codice articolo: PT83660047
-
Codice articolo: PT56418583