Description du produit
Caractéristiques techniques
Accessoires
Mode d’emploiFiche technique
Videos

Testeur d’adhérence par traction Elcometer 106/6

Le testeur d’adhésion Elcometer 106/6 a été spécialement conçu pour mesurer les revêtements sur béton.


Fonctionnant d’une manière similaire aux testeurs standards Elcometer 106, le testeur Elcometer 106/6 permet de tester des revêtements sur béton grâce à un plot de 50mm de diamètre (2’’).

L'Elcometer 106/6 est entièrement portable et fourni avec un étui de transport - le rendant idéal pour les tests sur site.

Testeur d’adhérence par traction Elcometer 106/6
Testeur d’adhérence par traction Elcometer 106/6Testeur d’adhérence par traction Elcometer 106/6Testeur d’adhérence par traction Elcometer 106/6

Caractéristiques techniques

Code article Description Certificat
F106----6 Testeur d'adhérence par traction Elcometer 106 - Graduation 6 ο
Plage 0 - 3.5MPa (N/mm2) 0 - 500psi  
Dimensions 105 x 210mm (4 x 8")  
Poids brut du kit 5,7kg (12,6lb)  
Liste de
colisage
Testeur d'adhérence par traction Elcometer 106/6, 5 plots de 50 mm (2"), bague de support, colle araldite, clé à cliquet, mallette de transport et manuel d'instructions  

 

Selon normes :
ASTM D 7234, BS 1881-207, DIN 1048-2, EN 1542, EN 12636

 

ο Certificat d’étalonnage disponible en option

 

Accessoires

T10618570 Plots de rechange, 50 mm (2") de diamètre (boîte de 5)
T99912906

Colle Araldite standard epoxy bi-composants, 2x tubes 15 ml

KT001910P122 Détoureur pour plots diamètre 50mm (2'')

Videos

1. An Introduction to Pull-Off Adhesion on Coated Surfaces

Adhesion testers are used to test how well a coating has adhered to a surface, as poor adhesion can lead to premature coating failures. The coating inspector has essentially three main methods to choose from - cross hatch, push off, and the most common, the pull-off adhesion test.

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

VIDEOS ASSOCIEES

1. An Introduction to Pull-Off Adhesion on Coated Surfaces
1. An Introduction to Pull-Off Adhesion on Coated Surfaces

Adhesion testers are used to test how well a coating has adhered to a surface, as poor adhesion can lead to premature coating failures. The coating inspector has essentially three main methods to choose from - cross hatch, push off, and the most common, the pull-off adhesion test.

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

//www.youtube.com/embed/rBTGaP-OXLM
2. Selecting the Dolly Diameter and Gauge
2. Selecting the Dolly Diameter and Gauge

When it comes to selecting the dolly diameter and adhesion gauge type to use for a pull-off adhesion test; factors such as the substrate material, the substrate shape, and the expected coating strength will affect the dolly or gauge the user chooses.

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

//www.youtube.com/embed/NskjSM8n5UY
3. Selecting the most Appropriate Position for an Adhesion Test
3. Selecting the most Appropriate Position for an Adhesion Test

When preparing a pull-off adhesion test, whilst the actual location and the number of pulls is typically defined by the test method or procedure that’s being followed, the actual positioning of the dolly is vital, as poor positions can result in low pull-off values or invalid tests.


 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here. 

To download the video script in English click here.

 

//www.youtube.com/embed/7xmYIfozQaw
4. Preparing the Dolly and the Coating
4. Preparing the Dolly and the Coating

Properly preparing the dolly and the surface before performing a pull-off adhesion test will help achieve higher pull-off values.

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

 

//www.youtube.com/embed/-26j4aoiFe8
5. To Cut or Not to Cut?
5. To Cut or Not to Cut?

Should the coating around a dolly be cut, or left uncut prior to a pull-off adhesion test; and whose decision is it to make?

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

//www.youtube.com/embed/ZqSNwQSOPqA
6. The Pull-Off Test
6. The Pull-Off Test

Once the glue between a properly prepared dolly or pull stub and a properly prepared coating has fully cured, the pull-off adhesion test can be undertaken using the adhesion tester of choice.

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

 

//www.youtube.com/embed/4rjUgA2Lwos
7. Assessing the Result; Glue, Adhesive and Cohesive Failures
7. Assessing the Result; Glue, Adhesive and Cohesive Failures

Once the pull-off adhesion test has been completed the tensile pull-off force, whether the coating was coat or not, the dolly size and gauge type, and the failure mode of the coating are all recorded; with the nature of the failure usually recorded as an estimated percentage to the nearest 10%.

 

This video is part of a series on Pull-Off Adhension Testing, to view the playlist please click here.


To download the video script in English click here.

//www.youtube.com/embed/TuFY8_KI9lQ
<P> 8. Measuring the Pull-Off Adhesion of Coatings on Concrete</P>

 8. Measuring the Pull-Off Adhesion of Coatings on Concrete

Testing coating adhesion on concrete substrates using a pull-off adhesion gauge is similar to testing coatings on metal substrates. However, there are a number of differences in the test procedures and equipment used.


This video is part of a series on Pull-Off Adhension Testing, to view the series playlist please click here.


To download the video in script in English click here.

//www.youtube.com/embed/O0wMikGLi84