Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials

Kara-40-intro

AThe Elcometer 40 Double Diaphragm Pneumatic Pump is ideal for high production industries.

  • Sommaire
    • Sommaire

      • 40 litre double diaphragm pump.
      • Spraying equipment for high production industries.
      • Can be used with several guns.
      • Double outlet version to work with two guns.
      • Special version for abrasive products.
      • 1:1 Ratio.

      Compliance: ATEX 2 II GX, UNE-EN-13463-1:2011, UNE-EN ISO 12100:2012, EN 809, EN12621, EN12162, EN 1127-1

  • Principales caractéristiques
    • Principales caractéristiques

      Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials

      pump_diagram_1

      Components

      1. Suction Hose

      2. 5 litre (35.2fl oz) Product tank

      3. Product inlet

      4. Product outlet

      5. Air pressure regulator (equipment)

      6. Air pressure regulator (spray gun)

      7. Antipulsation filter

      8. Product pressure regulator

      9. Pressure gauge (equipment)

      10. Pressure gauge (spray gun)

      11. Earth lead

      12. Air inlet to the equipment

      13. Transport carriage

      14. Wall mount

      Pressure Ratio1:1
      Max. Air Consumption (60 cycles/min.)580LPM (20CFM)
      Maximum Air Inlet Pressure7bar (102psi)
      Min. Inlet Hose Diameter Ø6mm (1/4”)
      LubricantSAE 10
      Max. Product Output Pressure7bar (102psi)
      Flow Rate @ 60 cycles/min (Free Flow)40LPM (1.41CFM)
      Air InletF 1/4" GAS BSP
      Product OutletMale 3/8" BSP
      Weight (including Frame or Trolley Mounted with Product Regulator)With Suction Hose: 18.5kg (40.79lbs)
      With Product Tank: 18kg (39.68lb)
      Dimensions (including Frame or Trolley Mounted with Product Regulator)With Suction Hose: 465 x 501 x 953mm (18.31 x 19.72 x 37.52")
      With Product Tank: 639 x 511 x 953mm (25.16 x 20.12 x 37.52")
      Packing ListElcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials

  • Informations techniques
    • Spécifications techniques
      Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
  • Numéro d'article
    • Numéro d'article
      Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
      • Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
        • Numéro d'article : PTD140AAS
  • Accessoires
    • Accessoires
      Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
      • Numéro d'articlePT56418708
      • Numéro d'articlePT56414128
      • Numéro d'articlePT56414039
      • Numéro d'articlePT56414044
      • Numéro d'articlePT56414040
      • Numéro d'articlePT56414041
      • Numéro d'articlePT56414042
      • Numéro d'articlePT52410019
      • Numéro d'articlePT30090091
      • Numéro d'articlePT83660030
      • Numéro d'articlePT83660029
      • Numéro d'articlePT54550016
      • Numéro d'articlePT49000478
      • Numéro d'articlePT83660047
      • Numéro d'articlePT56418583

Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials

Kara-40-intro

AThe Elcometer 40 Double Diaphragm Pneumatic Pump is ideal for high production industries.

Sommaire

Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials

  • 40 litre double diaphragm pump.
  • Spraying equipment for high production industries.
  • Can be used with several guns.
  • Double outlet version to work with two guns.
  • Special version for abrasive products.
  • 1:1 Ratio.

Compliance: ATEX 2 II GX, UNE-EN-13463-1:2011, UNE-EN ISO 12100:2012, EN 809, EN12621, EN12162, EN 1127-1

Principales caractéristiques

Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials

pump_diagram_1

Components

1. Suction Hose

2. 5 litre (35.2fl oz) Product tank

3. Product inlet

4. Product outlet

5. Air pressure regulator (equipment)

6. Air pressure regulator (spray gun)

7. Antipulsation filter

8. Product pressure regulator

9. Pressure gauge (equipment)

10. Pressure gauge (spray gun)

11. Earth lead

12. Air inlet to the equipment

13. Transport carriage

14. Wall mount

Pressure Ratio1:1
Max. Air Consumption (60 cycles/min.)580LPM (20CFM)
Maximum Air Inlet Pressure7bar (102psi)
Min. Inlet Hose Diameter Ø6mm (1/4”)
LubricantSAE 10
Max. Product Output Pressure7bar (102psi)
Flow Rate @ 60 cycles/min (Free Flow)40LPM (1.41CFM)
Air InletF 1/4" GAS BSP
Product OutletMale 3/8" BSP
Weight (including Frame or Trolley Mounted with Product Regulator)With Suction Hose: 18.5kg (40.79lbs)
With Product Tank: 18kg (39.68lb)
Dimensions (including Frame or Trolley Mounted with Product Regulator)With Suction Hose: 465 x 501 x 953mm (18.31 x 19.72 x 37.52")
With Product Tank: 639 x 511 x 953mm (25.16 x 20.12 x 37.52")
Packing ListElcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials

Spécifications techniques
Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
Numéro d'article
Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
  • Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
    • Numéro d'article : PTD140AAS
   
Accessoires
Elcometer Kara 40A Double Diaphragm Transfer Pump for Abrasive Materials
  • Numéro d'article: PT56418708
  • Numéro d'article: PT56414128
  • Numéro d'article: PT56414039
  • Numéro d'article: PT56414044
  • Numéro d'article: PT56414040
  • Numéro d'article: PT56414041
  • Numéro d'article: PT56414042
  • Numéro d'article: PT52410019
  • Numéro d'article: PT30090091
  • Numéro d'article: PT83660030
  • Numéro d'article: PT83660029
  • Numéro d'article: PT54550016
  • Numéro d'article: PT49000478
  • Numéro d'article: PT83660047
  • Numéro d'article: PT56418583