Buscar
Toggle Nav
Menu
Account

Forro venturi de carburo de tungsteno con funda de aluminio y sistema de chorro de agua

Tungsten_Carbide_Venturi_Liner_with_Aluminium_Jacket_Water_Jet_System_Intro_Image

Esta boquilla de granallado con abrasivo, idónea para uso en situaciones en las que sea necesario controlar el polvo, mezcla agua con el abrasivo, lo que reduce la cantidad de polvo que se traslada a la atmósfera.

  • Resumen

    • Resumen

    • Esta boquilla de granallado con abrasivo, con funda de aluminio que aporta resistencia y durabilidad, está recomendada para uso con abrasivos duros. Las boquillas de granallado con abrasivo se suministran con junta de caucho.

  • Información técnica
    • Características Técnicas
      Forro venturi de carburo de tungsteno con funda de aluminio y sistema de chorro de agua
      Referencia Blast Nozzle Nozzle No. Blast Orifice Diameter Blast Nozzle Length Blast Nozzle Entry Diameter
      MT28326-3* #3 4.8mm (0.19") Water Jet #3 25mm (1")
      MT28326-4* #4 6.35mm (0.25") Water Jet #4 25mm (1")
      MT28326-5* #5 8mm (0.31") Water Jet #5 25mm (1")
      MT28326-6* #6 9.5mm (0.38") Water Jet #6 25mm (1")
      MT28326-7* #7 11mm (0.44") Water Jet #7 25mm (1")
      MT28326-8* #8 12.5mm (0.5") Water Jet #8 25mm (1")
      Referencia MT28326-3*
      Blast Nozzle Nozzle No. #3
      Blast Orifice Diameter 4.8mm (0.19")
      Blast Nozzle Length Water Jet #3
      Blast Nozzle Entry Diameter 25mm (1")
      Referencia MT28326-4*
      Blast Nozzle Nozzle No. #4
      Blast Orifice Diameter 6.35mm (0.25")
      Blast Nozzle Length Water Jet #4
      Blast Nozzle Entry Diameter 25mm (1")
      Referencia MT28326-5*
      Blast Nozzle Nozzle No. #5
      Blast Orifice Diameter 8mm (0.31")
      Blast Nozzle Length Water Jet #5
      Blast Nozzle Entry Diameter 25mm (1")
      Referencia MT28326-6*
      Blast Nozzle Nozzle No. #6
      Blast Orifice Diameter 9.5mm (0.38")
      Blast Nozzle Length Water Jet #6
      Blast Nozzle Entry Diameter 25mm (1")
      Referencia MT28326-7*
      Blast Nozzle Nozzle No. #7
      Blast Orifice Diameter 11mm (0.44")
      Blast Nozzle Length Water Jet #7
      Blast Nozzle Entry Diameter 25mm (1")
      Referencia MT28326-8*
      Blast Nozzle Nozzle No. #8
      Blast Orifice Diameter 12.5mm (0.5")
      Blast Nozzle Length Water Jet #8
      Blast Nozzle Entry Diameter 25mm (1")
      * For 2" Contractor Thread variants, replace the asterisk in part numbers with a 'C'
      For 1¼" NPSM Thread variants, replace the asterisk in part numbers with an 'N'
  • Descargas
    • Descargas

         

        • Elcometer Blast Nozzles - Data Sheet

  • Referencia
    • Referencia
      Forro venturi de carburo de tungsteno con funda de aluminio y sistema de chorro de agua
      • Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.3
        • Referencia : MT28326-3*
      • Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.4
        • Referencia : MT28326-4*
      • Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.5
        • Referencia : MT28326-5*
      • Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.6
        • Referencia : MT28326-6*
      • Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.7
        • Referencia : MT28326-7*
      • Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.8
        • Referencia : MT28326-8*

Forro venturi de carburo de tungsteno con funda de aluminio y sistema de chorro de agua

Tungsten_Carbide_Venturi_Liner_with_Aluminium_Jacket_Water_Jet_System_Intro_Image

Esta boquilla de granallado con abrasivo, idónea para uso en situaciones en las que sea necesario controlar el polvo, mezcla agua con el abrasivo, lo que reduce la cantidad de polvo que se traslada a la atmósfera.

Resumen

main product photo

Forro venturi de carburo de tungsteno con funda de aluminio y sistema de chorro de agua

Esta boquilla de granallado con abrasivo, con funda de aluminio que aporta resistencia y durabilidad, está recomendada para uso con abrasivos duros. Las boquillas de granallado con abrasivo se suministran con junta de caucho.

Descargas

     

    • Elcometer Blast Nozzles - Data Sheet

Características Técnicas
Forro venturi de carburo de tungsteno con funda de aluminio y sistema de chorro de agua
Referencia Blast Nozzle Nozzle No. Blast Orifice Diameter Blast Nozzle Length Blast Nozzle Entry Diameter
MT28326-3* #3 4.8mm (0.19") Water Jet #3 25mm (1")
MT28326-4* #4 6.35mm (0.25") Water Jet #4 25mm (1")
MT28326-5* #5 8mm (0.31") Water Jet #5 25mm (1")
MT28326-6* #6 9.5mm (0.38") Water Jet #6 25mm (1")
MT28326-7* #7 11mm (0.44") Water Jet #7 25mm (1")
MT28326-8* #8 12.5mm (0.5") Water Jet #8 25mm (1")
Referencia MT28326-3*
Blast Nozzle Nozzle No. #3
Blast Orifice Diameter 4.8mm (0.19")
Blast Nozzle Length Water Jet #3
Blast Nozzle Entry Diameter 25mm (1")
Referencia MT28326-4*
Blast Nozzle Nozzle No. #4
Blast Orifice Diameter 6.35mm (0.25")
Blast Nozzle Length Water Jet #4
Blast Nozzle Entry Diameter 25mm (1")
Referencia MT28326-5*
Blast Nozzle Nozzle No. #5
Blast Orifice Diameter 8mm (0.31")
Blast Nozzle Length Water Jet #5
Blast Nozzle Entry Diameter 25mm (1")
Referencia MT28326-6*
Blast Nozzle Nozzle No. #6
Blast Orifice Diameter 9.5mm (0.38")
Blast Nozzle Length Water Jet #6
Blast Nozzle Entry Diameter 25mm (1")
Referencia MT28326-7*
Blast Nozzle Nozzle No. #7
Blast Orifice Diameter 11mm (0.44")
Blast Nozzle Length Water Jet #7
Blast Nozzle Entry Diameter 25mm (1")
Referencia MT28326-8*
Blast Nozzle Nozzle No. #8
Blast Orifice Diameter 12.5mm (0.5")
Blast Nozzle Length Water Jet #8
Blast Nozzle Entry Diameter 25mm (1")
* For 2" Contractor Thread variants, replace the asterisk in part numbers with a 'C'
For 1¼" NPSM Thread variants, replace the asterisk in part numbers with an 'N'
Referencia
Forro venturi de carburo de tungsteno con funda de aluminio y sistema de chorro de agua
  • Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.3
    • Blast 2" Contractor Thread Part Number: MT28326-3C
    • Blast 1¼" NPSM Thread Part Number: MT28326-3N
  • Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.4
    • Blast 2" Contractor Thread Part Number: MT28326-4C
    • Blast 1¼" NPSM Thread Part Number: MT28326-4N
  • Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.5
    • Blast 2" Contractor Thread Part Number: MT28326-5C
    • Blast 1¼" NPSM Thread Part Number: MT28326-5N
  • Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.6
    • Blast 2" Contractor Thread Part Number: MT28326-6C
    • Blast 1¼" NPSM Thread Part Number: MT28326-6N
  • Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.7
    • Blast 2" Contractor Thread Part Number: MT28326-7C
    • Blast 1¼" NPSM Thread Part Number: MT28326-7N
  • Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.8
    • Blast 2" Contractor Thread Part Number: MT28326-8C
    • Blast 1¼" NPSM Thread Part Number: MT28326-8N